Urgent!the extracture of  SD datasource affect operating transaction

Dear all
   I meet a very strange problem, i change the extractures in custozing cockpit of SD, and append
datasource's structure.I transport the datasources to
QAS . The datasources in QAS have no problem and can load data into BW system sucessfully,there are no problem in R/3 SD module.But i transport the extracture and datasources to Production system,some error occur.
Before i load data into BW , R/3 SD module can not update transaction data,just like can not update orders and billings,in SM13,there are error information of updating.I have searched many sap notes for this,but they are no available (R/3 version of my system  is 4.7 ).I deactivate the extracture in LBWE,R/3 SD module has no problem,but BW can not load data.
Could anyone give me a good solution? It's very urgent!!
Best regards
Alpha

Hi Alpha,
did you empty your delta queues before transporting the stuff to the prod system? Normally you need to post all data to the delta queue and do a delta upload to BW. Then you can transport changed datasources.
regards
Siggi

Similar Messages

  • When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says: The request for account "iCloud" failed.  The server responded with "502" to operation CalDAVSetPropertyQueueableOperation. Help!!??

    When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
    The server responded with “502”
    The request for account “iCloud” failed. 
    The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
    The request for account “iCloud” failed.
    I am then given the option of staying Online or going Offline.
    Can anyone help me?
    thanks

    Hello b.krushel,
    Thank you for using Apple Support Communities
    Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
    These sections in particular:
    General Troubleshooting
    Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
    Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
    Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
    Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
    Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
    Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
    Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
    Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
    Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of  Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
    In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
    You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
    If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
    Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
    Open Calendar (or iCal).
    Open Calendar (or iCal) Preferences.
    Click Accounts. You should see an account with your iCloud member name entered.
    Turn iCloud Calendars off and back on
    Quit Calendar (or iCal).
    Choose Apple () menu > System Preferences > iCloud.
    Remove the checkmark in the checkbox next to Calendars.
    Close System Preferences and wait about a minute.
    Open System Preferences and choose iCloud.
    Replace the checkmark next to Calendars.
    Close System Preferences.
    Open Calendar (or iCal) and test to see if the issue has been resolved.
    Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
    Take care,
    Sterling

  • Computer iMac7,1 has been giving sundry problems for some time. Within the last six weeks I have reinstalled the OS (Snow Leopard), without affecting the overall contents of the hard drive. ±3 weeks later the problems became more serious and I again reins

    Computer iMac7,1 has been giving sundry problems for sometime. Within the last six weeks I have reinstalled the OS (Snow Leopard),without affecting the overall contents of the hard drive.
    ±3 weeks later the problems became more serious and I againreinstalled the OS and installed OS 6.6.7 from the internet.
    I used the option to restore from the external backup driveand went back some time as it was my intention to reinstall individualcomponent in an attempt to find out where the problem might lie. This hasintroduced an entirely new problem! If I open Time Machine from the desktop itappears that all backups from late 2009 to June 2011 are intact. But, in thiscase there are none of the restore functions &c on screen. The latter areonly shown if Time Machine is opened from the menu bar or from the dock but, inthis case, available are only backups in late 2009!
    I also opened the Apple Hardware Test in an attempt toestablish the nature of the problem. The ‘quick’ version said there’s nothingwrong; the more detailed one reported “Error detected, 4HD/11/40000004.” I haveagain tried to employ this test but nothing I do can induce it to open!!!
    What to do? I need help urgently and would appreciate anyadvice that offers solutions to the problem.

    To check your S.M.A.R.T status open disk utility and click on your drive and then click on the info icon.

  • I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

    I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

    iCloud requires OS X 10.7.2.

  • I can't synchronize my iPod's with my iTunes software (Windows Vista Home Premium) due to problems with the access authorization / rights for this operation

    Hi there,
    I'd like to ask you something:
    I'm trying to synchronize all my iPod's (I have as many as 4 iPods: 2 iPod touch a 8 GB each and 2 iPod classic a 160 GB each) with my iTunes software (Version 11.3.1 which is installed on a Windows PC (Windows Vista Home Premium)). Unfortunately, the iTunes software refuses to run the command "synchronize with the iPod connected" regarding each and every iPod I have. iTunes just declares:
    Synchronizing is impossible because I wouldn't hold the access authorization / rights for this operation.
    I uploaded the songs at issue to my iTunes folder from CD's (all songs are in AAC format now).
    What is this access authorization, why was something like that invented and what can I do to get it?
    How do I have to proceed in detail?
    What would it cost?
    I am brand new here and have never ever made a post in any support community anywhere in the world in my life. Well, and I am not excessively knowledgeable about the particular computer or mac language but I know the very basics or can find out about them.
    Anyways - can you help me please?
    If you can't help me, who can do so?
    It would be nice if you could answer me as soon as possible!
    Thank you guys
    Prying Pedro

    Yes, others have experienced the problem, a simple search of the forums would have revealed that and the simple solution.
    Termporarily disable any security software on the computer.

  • Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc)?

    Would like to use 4nr iPads as an autocue system. Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc) and the others operating as slaves? Can this be done without the use of 3G or a remote Wifi hub? I would appreciate your input.................

    Open the document in Acrobat Reader and use the menu Window > New Window.

  • The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles.

    We are in the process of removing a child domain from the forest and are down to two DCs. These are both Server 2008r2 sp1 servers, one physical and virtual (PDC). When I try to remove a DC (not the PDC emulator) I get the following error:
    The operation failed because:
    Active Directory Domain Services could not transfer the remaining data in directory partition DC=DomainDnsZones,DC=mydomain,DC=local to
    Active Directory Domain Controller \\V-Svr03.mydomain.local.
    The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles."
    I have checked replication with repadmin /showrepl and all connections were successful. The dcdiag /test:kccEvent test on all servers passed.
    Most DCdiag tests are successful. The only failure is on NCSecDesc when running dcdiag /test:NCSecDesc
       Testing server: Default-First-Site\DC1-DEV-OFC
          Starting test: NCSecDesc
             Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
                Replicating Directory Changes In Filtered Set
             access rights for the naming context:
             DC=ForestDnsZones,DC=hookemup,DC=local
             ......................... DC1-DEV-OFC failed test NCSecDesc
    In researching this I find "If you do not plan to add an RODC to the forest, you can disregard this error."
    We have not successfully run ADprep /rodcPrep nor do we plan on having any Read-Only DCs, so I think we can ignor this error. We did try running ADprep /rodcPrep but got an LDAP error which I can duplicate if this is important.
    Schema and Naming FSMOs are on a DC higher in the forest. RID, PDC, and Infrastructure FSMOs for the child domain are on the Virtual server (PDC).
    Any guidance on where to go from here would be greatly appreciated as I have no more hair on my head to pull.

    Ok... I ran repadmin /showreps /v again and it shows no errors
    C:\>repadmin /showreps /v
    Default-First-Site\DC1-DEV-OFC
    DSA Options: IS_GC
    Site Options: (none)
    DSA object GUID: b294c59f-8b46-4133-89c5-0f30bfd49607
    DSA invocationID: 1054285d-cffe-42b4-8074-e2d44adbb151
    ==== INBOUND NEIGHBORS ======================================
    CN=Configuration,DC=mydomain,DC=local
        Default-First-Site\HESTIA via RPC
            DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
            Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
            DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 16381490/OU, 16381490/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 114817/OU, 114817/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\V-SVR01 via RPC
            DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
            Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
            DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 66047/OU, 66047/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\ATHENA via RPC
            DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
            Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
            DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 8098197/OU, 8098197/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
    CN=Schema,CN=Configuration,DC=mydomain,DC=local
        Default-First-Site\ATHENA via RPC
            DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
            Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
            DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 8097482/OU, 8097482/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\V-SVR01 via RPC
            DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
            Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
            DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 65239/OU, 65239/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 114149/OU, 114149/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\HESTIA via RPC
            DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
            Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
            DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 16381373/OU, 16381373/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
    DC=ForestDnsZones,DC=mydomain,DC=local
        Default-First-Site\V-SVR01 via RPC
            DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
            Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
            DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 66295/OU, 66295/PU
            Last attempt @ 2012-10-29 13:57:48 was successful.
        Default-First-Site\ATHENA via RPC
            DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
            Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
            DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 8098367/OU, 8098367/PU
            Last attempt @ 2012-10-29 13:58:13 was successful.
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 115032/OU, 115032/PU
            Last attempt @ 2012-10-29 13:58:25 was successful.
        Default-First-Site\HESTIA via RPC
            DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
            Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
            DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 16381653/OU, 16381653/PU
            Last attempt @ 2012-10-29 13:58:34 was successful.
    DC=mySUBdomain,DC=local
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 114871/OU, 114871/PU
            Last attempt @ 2012-10-29 13:54:02 was successful.
    DC=DomainDnsZones,DC=mySUBdomain,DC=local
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 114017/OU, 114017/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
    DC=mydomain,DC=local
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
            USNs: 114017/OU, 114017/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\HESTIA via RPC
            DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
            Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
            DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
            USNs: 16381614/OU, 16381614/PU
            Last attempt @ 2012-10-29 13:56:52 was successful.
        Default-First-Site\V-SVR01 via RPC
            DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
            Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
            DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
            USNs: 66325/OU, 66325/PU
            Last attempt @ 2012-10-29 13:58:34 was successful.
        Default-First-Site\ATHENA via RPC
            DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
            Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
            DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
            USNs: 8098385/OU, 8098385/PU
            Last attempt @ 2012-10-29 13:58:38 was successful.

  • How do I resolve this related Ical message? The server responded with "400" to operation CalDAVUploadDropBoxFileQueueableOperation.

    How do I resolve this related Ical message? The server responded with “400” to operation CalDAVUploadDropBoxFileQueueableOperation.

    I am having this problem too...and also I (most of the time) can't invite anyone on my google apps domain to a meeting. WEIRD! HELP!!! I just switched to Mac from PC...this was supposed to be EASY!
    I get all kinds of error  messages...
    1) The request for “Test Appointment” in “[email protected]” in account “yyyy.com Google” failed.  The server responded with “400” to operation CalDAVScheduleEventQueueableOperation. *My google calendar *IS* updated despite the error, but the appointment is greyed out on my calendar.
    2)  The URL https://calendar.google.com/calendar/dav/[email protected]/user///calendar.google.com/calendar/dav/[email protected]/user/ encountered HTTP error 404. Make sure the URL is correct. The URL *IS* correct.
    Also, when I try to invite people to appointments, iCal adds random attendees and frequently will not add an attendee if they are in my domain. HELP.

  • How to find out the tables that will be affected using a transaction

    Hi,
    How to find out the list of database tables that will be affected when we use a standard transaction(ex. VA01, MM01..)...?(like When we create a salesorder, which tables and which fields will be affected..?)
    Is there any transaction or a simple way to find out the solution?
    Thanks,
    Pradeep.

    Hi,
    Give transaction code and in menu(system- status),  double click onthe Program name.
    Check in TOP INCLUDE - you will find all the tables related to that transaction.
    Thanks,
    Anitha

  • Very Urgent: UDC Error in BI datasource preview

    Hi All,
        My requirement is to extract the data from the legacy system i.e. Sybase 12.5 using UDC to SAP BI 7.0. We have established UDC connection, created view and BI 7.0 datasource. The user has all the access i.e. select, dbo access for the view. While datasource creation I have selected UDC source object from the Sybase, used default system proposed fields and activated the datasource. When I try to check the data in the preview, I am getting following message in the status bar:
    S:RSSDK:300 Query execution failed: "DB name"."dbo"."VIEW1" not found. Specify owner.objectname or use sp help to check whether the object exists (sphelp may produce lots of output). I have checked in the URL http://<hostname>:port/TestJDBC_Web/TestJDBCPage.jsp before preview, it worked fine and showed all the table names and data in tables.
    By same username I have logged in Sybase and ran created view, which extracted data without any problems.
    We have followed same procedure for creation of connections, views and datasources for SQL server, it is working fine without any issues. We have problem only with Sybase system. Would anyone help me in resolving this issue. ******Gurantee of award points********
    Regards
    Eric.

    Hi All,
        Any ideas or thoughts on this issue, I greatly apprecaite your time and help.
    Thanks,
    Eric.

  • Just bought a used MacBook pro after my previous died. I want to migrate my applications, data, etc from a time machine backup of the old computer to the new. Will this affect, or overwrite the Apps., data, etc existing on the new machine?

    Just bought a used MacBook pro after my previous died. I want to migrate my applications, data, etc from a time machine backup of the old computer to the new. Will this affect, or overwrite the Apps., data, etc existing on the new machine?

    No. Only those Apps that are not installed on the new will migrate over.

  • I recently started to get an error message "MobileMe Services" have stopped working.  I use Vista.  If I remove the MobileMe program, will it affect syncing with my iPhone or with Google Calendar?

    I recently started to get an error message "MobileMe Services have stopped working".  I use Vista.  If I remove the MobileMe program, will it affect syncing with my iPhone or with Google Calendar?

    No, just uninstall the MobileMe control panel. All Mobileme services have been discontinued, so the control panel is not doing you any good being in there at present.

  • Receiving Error : Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables. while trying to create a new Customer.

    Hi All,
    We have set up a new Operating Unit in Oracle Apps. Now when I am trying to create a new Customer in that Operating Unit, I am receiving following error:
    ERROR MESSAGE:-Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
    We do have MO: Operating Unit and MO: Default Operating Unit set properly at Responsibility level for the Responsibility through which I am accessing this form.
    Your help is appreciated!
    Thanks in advance,
    SKA

    You can refer this thread and check your MO operating unit is set or not https://community.oracle.com/message/3937028 thanks

  • The server responded with an error. The request for account "Yahoo" failed. The server responded with "502" to operation CalDAVAccountRefreshQueueableOperation

    The server responded with an error. The request for account "Yahoo" failed. The server responded with "502" to operation CalDAVAccountRefreshQueueableOperation

    I am tired of how Yahoo has gotten worse and worse. It is the ONLY account I get problems with DAILY (even after removing and re-adding). AOL will act up once in a while not taking a saved password but accepting it when OK is clicked.... But Yahoo is always responding with such errors.... Today's calendar error is:
    The request (CalDAVAccountRefreshQueueableOperation) for account “Yahoo” failed.

  • My iCal won't go online and returns the error message: The server responded with "500" to operation CalDAVAccountRefreshQueueableOperation.

    My iCal won't go online and returns the error message: "The server responded with “500” to operation CalDAVAccountRefreshQueueableOperation."

    OK Now I can answer my own question.  The incomprehensible (inexcusably geeky) error message is actually Apple language for saying simply: "The iCloud servers are down again.  Please wait until we've fixed them."  I found this out by talking to Apple support.  It took about 12 hours for the iCloud server synching calendars to come back online.  When they did, my calendar reloaded, and everything was fine.

Maybe you are looking for