Urgent: Timer Event

Hi,
i have a scenario, were i want to have timer event.
ie enduser login to the portal(they will do their work in the application ),behind a timer will be running and after 30 minutes i want to tigger a event.
if the application is running more than 30 minutes i want print a message, How to know that application is running from last 30 minutes.
Its urgent & will be Appreciated.
Thanks
Maha

Hi
I think you must use the IWDTimedTrigger, that automatically triggers an event with specified delay.
You can set the delay property for the UI element and set it according to your need.
Hope this link may help you.
http://help.sap.com/saphelp_nw04/helpdata/en/03/7c6b40dde0980ae10000000a155106/content.htm
Regards
- Vinod

Similar Messages

Benifites and time event

hi,(URGENT)
   v.v.thanks to anji reddy for giving valuable coding and reward also.
   please give me coding on 'benefits and time event' and some functional matrial also.
regard : mahesh
thanks in advance

Woody,
Check Schema TC00,
The daily work schedule is imported as follows to table TZP:
Time ID     Time        Duration
01          00.00                   Time outside working time
02          08.00                   Fill time
03          09.75                   Core time
04          12.00       0.75        Core time break
05          09.00       0.25        Fill time break
The time ID is used to control the assignment of time types to time
pairs (function TIMTP) using the Time Type Determination Table (T555Z).
The time pairs generated by function P2000 in table TIP are assigned
pair type "1", if the day type according to the personal work schedule
is blank or "0", and pair type "2" if the day type is "1".
All clock times are decimalized beforehand. If there is a substitution
with cost distribution on the day being evaluated, the appropriate split
indicator is set.
Hopefully this helps,
Regi

CATS viz Time Recording in Time events IT 2011

Hi Experts
Need some urgent guidance. We are using punch cards to record timing. I understand that time recording machine will upload the records in Time event IT 2011.
On the other hand we have requirement where the real time should be there in CATS for employees so that PS can use for project planning and posting.
Presently we have time admin those manually key in time recording data in Cats but going forward we use time cards to record time.
How we can go ahead where we can use time machine to record also plus it uploads the time entries in cats.
Will appreciate your response on this.
Regards

Hi,
Time recorded from the external systems can be obtained as a text file and will be uploaded to CATS using a customized program designed by ABAPers.

Logical time in deleted time events - RPUAUD00

Dear All,
We are using standard report RPUAUD00 to read deleted time events (Infotype 2011) from system. In certain cases, deletion entries are displayed without any entry for field LTIME (Logical Time). Can any one throw some light, as of why and how this LTIME entry is not logged in change log?
Thank you.
Regards,
Kartik

Dear All,
We tried replicating this behaviour, but unable to. Any thoughts on this behaviour please..
Regards,
Kartik

To transfer time events from external time recording system to sap r/3

hi all,
I have a task to make an interface program between external time recording and sap r/3, and then to transfer the time events from that external system to sap system with the help of an rfc, i have got some information like the data first has to be transferred to the table CC1TEV and then from this table the data will be uploaded to 2011 infotype with the help of a standard program, but i am unable to find a solution for making the interface program and the RFC or BAPI which will transfer the records from external system.
if anybody has any information on this plz help me out to solve this problem.

Which recorgding terminals using to capture time events? They should have give some guidelines about this?
Regards
niranjan

Looping through inbox items on timer event is really slow...?

Hi,
I have an issue with a email sync event that I am running. Essentially, I am given a date (the received date of the last email synced) via another process and then need to return all the emails in the user's inbox the where receivedDate > this given
date.
I have a timer object than triggers my sync event every 15 mins. I also have a button that allows the user to manually activate the sync - this basically changes the timer to 3 secs and so it fires the sync event.
If the sync event is fired manually as per above, it loops through everything quite quickly (~12,000 emails in 30 secs) and I can stored the sender/recipient and received time data I require from these in a list of objects, which I sync later on in a background
process. During this loop the main UI freezes up, which is fine since I show a progress bar so the user knows how long they need to wait, and a large sync like this should only occur on their first sync theoretically. If the first sync event is
fired without the manual input - so still called from the same timer event, but just on the normal 15 min event, not the shortened 3 sec one - then it runs differently. The sync takes a lot lot longer, and the UI doesn't freeze up.
I presume this might be because it is fired slightly differently and does not hog up the main thread, but rather shares it with normal Outlook operations. Maybe the operations are being run on a background thread and then keep having to jump into the
main thread to access the email items...? Either way, I'm not quite sure how this is happening since the only difference is the user pressing a button that changes the timer.interval. The code that is run is the same, and the button press doesn't
trigger the actual sync itself.
Is there a way I can force this first sync to always run solely in the main thread, it can freeze up Outlook and show the progress bar until it is done? Ideally any subsequent syncs would then be run with no progress bar and no freezing up of the UI.
Many thanks,
Tom

Hello Tom,
> Maybe the operations are being run on a background thread and then keep having to jump into the main thread to access the email items...?
You shouldn't use another threads when dealing with the Outlook object model. Office applications use the single threaded apartment (STA) model and don't support multithreading. All calls made from another threads are marshalled by Outlook to the main
thread. However, you can use a low-level code (Extended MAPI) to access the data from secondary threads. For example, you can use Redemption which is based on Extended MAPI.
> it loops through everything quite quickly (~12,000 emails in 30 secs)
Instead of looping over all items in the folder I'd recommend using the
Find/FindNext
or
Restrict methods of the Items class. You can read more about them in the following articles:
How To: Use Find and FindNext methods to retrieve Outlook mail items from a folder (C#, VB.NET)
How To: Use Restrict method to retrieve Outlook mail items from a folder
You can use the System.Windows.Forms.Timer class which uses the main thread for invoking the Tick event. The .NET
Framework Class Library provides three different timer classes: System.Windows.Forms.Timer, System.Timers.Timer, and System.Threading.Timer. Each of these classes has been designed and optimized for use in different situations. The Comparing
the Timer Classes in the .NET Framework Class Library article examines the three timer classes and helps you gain an understanding of how and when each class should be used.
Also you may find the
AdvancedSearch method of the Application class helpful. Pay special attention to the fact that the search is performed in another thread. You don’t need to run another thread manually since the
AdvancedSearch method runs it automatically in the background. See
Advanced search in Outlook programmatically: C#, VB.NET for more information.

Multiple entries in TEVEN for one time event created by HR-PDC

Hi experts,
we have a SAP certified time attendance system connected to our ERP 6.0 system by HR-PDC interface.
Now it happens from time to time that exactly one time event causes multiple entries in SAP table TEVEN and therefore is shown in the check report PT40.
The number of duplicate records is always different - up to about 140 entries for one and the same time event in the worst case.
Except the field PDSNR all the other fields contain exactly the same values.
I have checkt many of the problematic bookings and I have always just one correct time event in the source application and there is only one data record in the corresponding IDOC too.
Also the number of transferred records shown in the protocol spool of the report SAPCDT45 is correct and identical to the number of records in the IDOC.
The first place where I can identify the problem with the duplicate records is the table TEVEN.
No records are left in the interface table CC1TEV.
I have seen that within one block of identical time bookings in TEVEN the field PDSNR ist not numbered in one sequence but there are gaps in between that are used for any other entries.
As I can see in historical entries of TEVEN the problem exists already for years so it does not seem to be in direct connection with the latest support pack or something like that.
The relevant jobs run every 15 minutes whereby SAPCDT45 is started 5 minutes after RPTCC106.
Has anyone else experienced this strange behaviour or knows what I could further investigate?
Many thanks for your replies in advance and best regards
Günter

Hi Carlos,
thanks for your fast reply.
It seems that an entry for Status A00 or A05 would solve my problems and of course I will try to handle it by this view.
But do you know whether there is any possibility to find out how it comes to these repeated postings?
I do not know whether the repeated postings happen in the same package (IDOC) or in an earlier package and to be honest I do not think that the record comes from the source application a second time because there I could find only one record that seems to be correct.
I also cannot understand how it comes that I have even 140 "identical" entries for one time event.
Could you please let me know your thoughts about that?
Anyway I thank you for offering a solution - even if I do not understand the reason for the pborlem.
Thanks and best regards
Günter

Timer Event Generator.

Hi there
I'm running WL Platform 8.1 SP4. I am using the timer event generator to fire requests to a channel/process. The timer is simply used to start a given process, there is no notion of message sent to it.
Issues
1) When defining a channel,
e.g
<channel name ="XToY" messageType="xml"
qualifiedMetadataType="eg:TimerEventGenerator" />
It seems I must define messageType="xml", if i define it as 'none' then it does not appear in the channel list when defining the timer event generator, therefore i cannot bind to it. So if I leave the messageType as xml, it appears. For the configuration of the timer, the message element is optional. Problem is when the timer now fires it throws the following error:
<08-May-2006 10:25:25 o'clock BST> <Error> <WLI-Core> <BEA-489030> <Error publishing Timer Event message for XToYTimerEG : com.bea.wli.mbconnector.MBConnMDBBase$MBConnectorException: Can't create proc
ess variable: com.bea.wli.mbconnector.MBConnMDBBase$MBConnectorException: Can't read XML (no root element)>
Any ideas?
2) Can someone direct me to any wlst scripts that allow the creation of a timer event generator in a cluster? ?I cannot find anything on dev2dev ?
TIA
Arvinder

Ok, you can basically leave the messageType as XML
and for the Timer EG configuration, for the optional message you can add <dummy/> this will fire the request and start a workflow or whatever is bound to the channel.

Cannot Deploy JPD with Timer Event Subscription in WLI 9.2 MP1 cluster

Has anyone had any luck deploying a JPD with a timer event subscription to a 9.2 MP1 WLI cluster? I am able to deploy Synchronous Client Request JPDs without any trouble but the ones that rely on internal WLI queues for invocation will not deploy in production. I am able to deploy the problematic JPDs to a non-clustered development environment without any issues but when I try to deploy the same artifact to a 9.2 MP1 cluster I see the following error:
Throwable: java.security.PrivilegedActionException: java.security.PrivilegedActionException: java.security.PrivilegedActionException: javax.management.InstanceNotFoundException: tosipDomain_phase2:Name=cgJMSServer,Type=JMSServer
Stack Trace:
java.security.PrivilegedActionException: java.security.PrivilegedActionException: java.security.PrivilegedActionException: javax.management.InstanceNotFoundException: tosipDomain_phase2:Name=cgJMSServer,Type=JMSServer
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:373)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at com.bea.wli.knex.runtime.core.bean.EJBGenerator.deployWorkshopQueues(EJBGenerator.java:178)
     at com.bea.wli.knex.runtime.core.dispatcher.DispResources.deployQueues(DispResources.java:727)
     at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnit(DispCache.java:667)
     at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnitForURI(DispCache.java:1025)
     at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnitForURI(DispCache.java:946)
     at com.bea.wli.management.adminhelper.AdminHelperBean.getDispFile(AdminHelperBean.java:348)
     at com.bea.wli.management.adminhelper.AdminHelperBean.getProcessMetadata(AdminHelperBean.java:94)
     at com.bea.wli.management.adminhelper.AdminHelperSSB_wivmoo_EOImpl.getProcessMetadata(AdminHelperSSB_wivmoo_EOImpl.java:70)
     at com.bea.wli.management.adminhelper.AdminHelperSSB_wivmoo_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:548)
     at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:438)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:434)
     at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:57)
     at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:965)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
I am suprised about this error, b/c we are running out of a vanilla WLI domain created with the Configuration Wizard and the error message has to do with an internal JMS server that we have left with the default configuration. Has anyone else had success with this?
On a side note, I have to complain about the lack of 9.2 WLI documentation about deploying applications to production. The links on e-docs.bea.com actually redirect you to 8.5 documentation?!? I can't believe that this is the documentation we are left to use for 9.2 because there are so many changes between WLS 8 and 9.

Hey buddies,
I have a very similar error on WLI 9.2 MP2 on development mode with a cluster of managed servers on the same machine. I'm afraid that the automatic resource creation feature of dev mode is creating the error.
The ...processes.UnlockService is jpd called by a JMS Broker thru a channel, and I considering it as the first suspect point.
Any help is welcome.
LOG CONTENT:
<May 15, 2008 8:04:57 PM GMT-03:00> <Notice> <Stdout> <000000> <2008-05-15 20:04:57,575 [PERFO] localServer 10.10.10.10 xMDA [iid=15899 prd=TC DATA act=INSTALL otp=I onb=00011552111 cid=12345189 mrt=] END Designar_TCDATA OK>
<May 15, 2008 8:04:57 PM GMT-03:00> <Error> <WLI> <000000> <Exception processing com.oi.integra.provisioning.lockManager.processes.UnlockService
java.security.PrivilegedActionException: java.security.PrivilegedActionException: java.security.PrivilegedActionException: javax.management.InstanceNotFoundException: granite_wli_dev:Name=cgJMSServer,Type=JMSServer
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:373)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at com.bea.wli.knex.runtime.core.bean.EJBGenerator.deployWorkshopQueues(EJBGenerator.java:178)
     at com.bea.wli.knex.runtime.core.dispatcher.DispResources.deployQueues(DispResources.java:727)
     at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnit(DispCache.java:671)
     Truncated. see log file for complete stacktrace
java.security.PrivilegedActionException: java.security.PrivilegedActionException: javax.management.InstanceNotFoundException: granite_wli_dev:Name=cgJMSServer,Type=JMSServer
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:373)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at com.bea.wli.knex.runtime.core.bean.EJBGenerator.ensureQueue(EJBGenerator.java:442)
     at com.bea.wli.knex.runtime.core.bean.EJBGenerator.ensureWorkshopQueues(EJBGenerator.java:412)
     at com.bea.wli.knex.runtime.core.bean.EJBGenerator$3.run(EJBGenerator.java:194)
     Truncated. see log file for complete stacktrace
java.security.PrivilegedActionException: javax.management.InstanceNotFoundException: granite_wli_dev:Name=cgJMSServer,Type=JMSServer
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:373)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at com.bea.wli.knex.runtime.core.bean.EJBGenerator.doesQueueExist(EJBGenerator.java:359)
     at com.bea.wli.knex.runtime.core.bean.EJBGenerator$6.run(EJBGenerator.java:449)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     Truncated. see log file for complete stacktrace
javax.management.InstanceNotFoundException: granite_wli_dev:Name=cgJMSServer,Type=JMSServer
     at weblogic.management.mbeanservers.compatibility.internal.MBeanHomeImpl.getProxy(MBeanHomeImpl.java:68)
     at weblogic.management.mbeanservers.compatibility.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.java:88)
     at weblogic.management.mbeanservers.compatibility.internal.MBeanHomeImpl.getAdminMBean(MBeanHomeImpl.java:265)
     at com.bea.wli.knex.runtime.core.bean.WLSUtil.getWorkshopJMSServer(WLSUtil.java:713)
     at com.bea.wli.knex.runtime.core.bean.EJBGenerator$5.run(EJBGenerator.java:372)
     Truncated. see log file for complete stacktrace
>
java.security.PrivilegedActionException: java.security.PrivilegedActionException: java.security.PrivilegedActionException: javax.management.InstanceNotFoundException: granite_wli_dev:Name=cgJMSServer,Type=JMSServer
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:373)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)

Report for time events

Hi Experts
i facing a problem which is i want a report for the time events which out time evaluation
how i can get this report please advice

Hi
this transaction is working in case a will run Time evaluation if am right or not please advice
really i facing a big problem
thank you for your cooperation
Edited by: Haseeb Nagieb on Aug 28, 2008 11:02 PM

Upload time events using PA61?

Hello friends,
I have written code to upload time events using BDC for transaction PA61.
But when i try to upload data,in the LIST ENTRY part there's a field ORIGF that is automatically getting filled with 'M" (indicating a manual entry).
The requirement is that i need to change the content of ORIGF to SPACE.
I tried updating table TEVEN but there's no change.
Can anybody please suggest me as to whet i must do.
Thanks in advance.
Sanghamitra.

Hello friends,
Yeah thats right.
Its always a good gesture to write down the way we solved.
I faced problem in two areas :
1) uploading more than three rows in the time events part of transaction PA61.
2) updating ORIGF field of TEVEN.
Solution:
1) have set the a counter while looping through the time events and also set field DEFSIZE of CTUEVENTS.
2) i observed the records getting uploaded in foreground mode so i could not notice the difference in the contenets of the field ORIGF but when i had done the same in background i could.
I hope the reason is understood.
Regards,
Sanghamitra.
2)

JButton event listening if timer event already exists

I would like to detect an event on a button, which is easy enough. But I already have a timer event happening and when I click a button nothing happens.
I would like to store what button was pressed so that within the timer event I can check if a button and which button has been clicked and act on this.
Code I have is below, taken out most of what isn't needed to explain what I have.
int DELAY = 75;
private Timer movingTimer;
public BackgroundLayered(int inWidth, int inHeight)
          //loading images
          animation = new totalAnimation();
          animation.............................
          //displaying the images
          ImageIcon image = new ImageIcon("background2.jpg");
          JLabel background =.............................
          JPanel panel = new JPanel();
          //setting up labels
          cow1Image = animation.cow1Right();
          cow1 = new JLabel(cow1Image);
          cow1.setBounds(cow1startX, cow1startY, 20, 20);
          //adding buttons
          block = new JButton("Block");
          eat = new JButton("Eat");
                //setting bounds
          block.setBounds(3, 305,70,30);
          eat.setBounds(76, 305,70,30);
          //start timer
          movingTimer = new Timer(DELAY,new TimerHandler());
          movingTimer.start();
          //adding components to display
               // Labels added to Palette layer and buttons to default layer
          getLayeredPane().add(cow0, JLayeredPane.PALETTE_LAYER);
          getLayeredPane().add(cow1, JLayeredPane.PALETTE_LAYER);
          getLayeredPane().add(block, JLayeredPane.DEFAULT_LAYER);
          panel.setOpaque(false);
          setContentPane(panel);
       //this event handler doesnt get invoked when buttons are pressed
        public void actionPerformed(ActionEvent event)
                            System.out.println("button pressed");
private class TimerHandler implements ActionListener
          public void actionPerformed(ActionEvent actionEvent)
               //moving the cows
               cow0.setLocation(cow0startX, cow0startY);
               cow1.setLocation(cow1startX, cow1startY);
               //check for collisions
               collisionCow0 = obstacle.checkCol1Cow0();
               collisionCow1 = obstacle.checkCol1Cow1();
               cowBack = obstacle.cowob1Collided();
          }

Please ignore this topic! I have now resolved the problem.
Having only done event handling in applets, I didnt realise you had to add the actionlistener to each button when doing it on desktop also!

How to create a time event without having user interface freeze

Hi,
I am new to labwindows and i am trying to create a time event where every hour for 24 hours i want my program to write somethign in excel.
I tried using function Delay and SyncWait and those functions freezes up the user interface.
Any tips/help will be appreciated.
Thank You
Solved!
Go to Solution.

Many, if not most, CVI developers wind up implementing a delay function for themselves that periodically, during the delay, wakes up and processes events so that the GUI isn't frozen.
The idea is to break the wait or delay up into pieces, and process system events in between each piece.
A timer works too, you can try the async timer that Wolfgang mentioned, it runs a bit better and on a separate thread, so it lets you do what you normally would with the main thread and the GUI, yet still get timer function. If you use a smart delay, you still wind up doing nothing a great deal of the time, and events are only processed periodically.

Upload Time Events to SAP System

Our client is not using any standard SAP approved time swap in-out machine, they have a locally manufactured machine installed at the factories. Client need to implement Positive time management. On daily basis a text file will be generated from Time machine that need to upload into SAP system. This file contains all the In-Out timings of employees at work, this may also contain the error data like double In or double out, only In, only out etc.
We tried to confess them to check the data before uploading to SAP, client is not ready for that, since data is heavy.
Our understanding:
Using Report RPTCC106 we can upload the time events data from non-sap to SAP through logical systems using IDoc then post the time data using report SAPCDT45. We can check all incorrect time data from Time management Pool, then all corrected data will be posted to table TEVEN and IT 2011.
But we are unable to process these steps.
Can you please recommend us the best practices for implement the positive Time management in these scenarios.
Thanks in Advance
Imran Yoosuf
[email protected]

Hello Imran,
I'm facing a similar situation here. Have you resolved this issue? If so, please could you post it here?
Thanks and regards,
Vivek Thomas

Time Evaluation with multiple time events

Dear Friends,
I have an issue in our current project. Kindly try to help me with a solution.
We are working on Time Management module with Positive Time Recording method and evaluation- India. (Payroll module is not implemented)
My issue is:
Evaluation with multiple time events in a day: In our project, we have a scenario like the employees record multiple clock in and clock out times for one day and are uploaded into infotype 2011. But during time evaluation, only first Time event that is P10 (Clock In) and the last Time event P20 (Clock-out) in a day should be considered for evaluation, ignoring any multiple time entries in between duration in the table TEVEN (Infotype 2011).
Pls let me know how this requirement can be met. Do we need to define any new PCRs or create any functions? If yes, pls tell me the process in detail as I am new and implementing Time management (Positive Time recording with Evaluation) for first time. Try to help me as soon as possible.
Thanks & Regards,
Chiranjeevi
Edited by: chiran reddy on Feb 15, 2008 2:20 PM

is it not possible to enter only the first p10 and last p20 from the time systems into 2011.

Urgent: Timer Event

Similar Messages

Maybe you are looking for