Urgent:Tnsname host has been changed for informatica

Hi All,
I am new to informatica,
my tnsname host has been changed in tnsnames.ora file. i wnt to makes the changes for the informatica where it uses the same host. kindly let me know the places where i have to change the host name in informatica.
Thanks,
rajitha.

Hi ,
In workflow manager Connections-->Relational path create new connection with new DSN name related to your new TNS entry and assign this connection to your workflow connections.
Thanks

Similar Messages

RSA1 error Logical system name has been changed for this system

Hello All,
Earlier the RSA1 was activated for client 300 on our crm 5.2. after that we changed the client to 500 using SE16 -> Type table RSADMINA / Check Colum BWMANDT -> 500.
But now when we login to client 500 and execute RSA1 it is showing
Logical system name has been changed for this system"
In scc4 we have not made any changes. Can you tell what should be done ? in the pop up it is showing following steps
Change the name of the logical system (table T000) for client back to SIDCLNT300. This enables you to continue working with the system.
If you really want to change the logical name, than you can, if and when you:
change the system name back to SIDCLNT300,
delete all existing connections between this system and other systems,
delete all transfer structures that still exist, and
do not use ALE or Workflow.
Guys do you know how to fix this ? .
Also do you know Assignment of Source System to Source System ID (table RSSOURSYSTEM) using RSA1 ?
Edited by: Sahad K on Mar 17, 2008 10:55 AM

Hello Hari,
Both the options you said cannot be used
since the logical system SIDCLNT300 is used by client 300 and it cannot be given to client 500. Also there already exist a logical system SIDCLNT500 which is assigned to client 500.
I found out the issue. In the table RSBASIDOC the logical system name that can use rsa1( bw client )is set as SIDCLNT300). Only if we delete that entry and set it to SIDCLNT500 ( 500) we can use it on client 500.
The solution is specified in /message/3284842#3284842 [original link is broken]
Let me try the solution 2 and inform you.
Solution 2:
You cannot delete the source system. Two cases have to be distinguished:
The source system still exists.
Switch to Transaction SM59. Find the destination which has the same name as the logical system of the source system from field SLOGSYS in table RSBASIDOC (see above).
Such a destination does not exist in Transaction SM59. In this case, you have to create the destination to the source system. Name the destination equal the entry in SLOGSYS from above. Then return to the Administrator Workbench and repeat the deletion.
The entry exists but a remote login is not possible. Correct the communication parameters.
Everything works. Change to Transaction SE37, function module RSAR_LOGICAL_SYSTEM_DELETE, Sngl. test. Parameter I_LOGSYS = <log. name of the source system>, I_FORCE_DELETE = 'X'.
The source system no longer exists or was replaced with another source system with the same IP address.
Proceed as described in the first case but make sure, that the field 'Target host' contains a not existing server in the maintenance screen of the destination (Transaction SM59). If necessary, change an existing entry. Later when you delete, the system asks you whether you want to delete, although the source system is not available. Select 'Ignore'.
Incase you have any idea other than this please let me know how to edit the RSBASIDOC table and change the entry to client 500.
Edited by: Sahad K on Mar 18, 2008 5:07 AM

BI Error Logical system name has been changed for this system

Hello All,
I have installed the BI system and did a client copy from 000 to 200 client with profile SAP_ALL.
Now I have loged into the system with client 200 and wen I run RSA1, I am getting the following error
message: "Logical system name has been changed for this system"
Thanks
Sekhar..

Hi,
Goto tcode SCC4.
Switch to change mode. (System will prompt that this table is cross client. Continue)
Select your client (in this case 200). Click on details button (next to change mode button)
Enter the proper logical system name in Logical system field.
Click on Save button.
Then try RSA1.
Hope it helps
regards,
Pruthvi R

BI:Logical system name has been changed for This System

Hi, Gurus,
I want to Use my IDES SAP ERP 7.0 as my BI system for training purposes,when iam executing the transaction RSA1 in the system it is giving message
"Logical system name has been changed for
system"
I Have changed the entries in table "RSADMINA" and maintained the Client no as 100 (My base client for BI) which i have copied from 001.
When iam executing the Transaction RSA1 in 100 it is giving above mentioned error ,whereas in 001 it is working fine.
Please Help . ..
I tried to change the system logical name by "bdls" but it doesnt worked........

Hi Deepak,
Check the entries in table RSLOGSYSMAP (this is meant for correct conversion of logical system names for tansports).
You can easily maintain the entries using tcode RSLGMP.
Hope it helps.
Grtx
Marco
PS I'm not a basis guy but do you have a correct BI installation yet?

Logical system name has been changed for this system

Hi gurus,
I am fasing problem in BI7 system. we created a new client in the system & want to set it for BI development.
System Response
The transaction is canceled.
Procedure
Change the name of the logical system (table T000) for client back to BID500. This enables you to continue working with the system.
If you really want to change the logical name, than you can, if and when you:
change the system name back to BID500,
delete all existing connections between this system and other systems,
delete all transfer structures that still exist, and
do not use ALE or Workflow.
Regards,
Darshan..

Sorry, BI is a one client system. You cannot have a prod client and a dev client within one SAP system.
But...
...NO, you can't!
Best regards
Michael
EDIT: just to add, there is an exception if you have a SCM/APO type system [522569 - BW: Working in several clients (especially APO 4.x/SCM 4.x)|https://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm=522569]

Tds rate has been changed for the year 2009-10

Hi experts,
Now my user wants to change TDS rate as per section 194J and 194I.Please advise where i can make change in configuration.
Regards,
Samar

Hi,
Create new tax codes for the new rates.
Regards

Java.sql.SQLException: ORA-04062: timestamp of function has been changed

Hi,
Environment:
We host our java 1.5 , j2ee application on multi-clustered environment connecting 2 app servers to 1 node of oracle RAC cluster.
We have batch jobs running daily in the morning, that does a new data upload to the production DB. (Load to a Tmp table, Drop the production table, rename Tmp table to production table and re-create indexes.)
Recent Change:
We recently migrated from Oracle 10.0 version to 10.1...
Issue:
With the recent change, we started facing the error, 'ORA-04062: timestamp of function has been changed' for the STORED PROCEDURES that we use in the application. And I am sure that this is because of the job that runs in the morning, as it re-creates the tables that are used by the stored-procedures. So the stored-procedures become invalid and requires recompile. And we did recompile as well, but still the same error. And then changed the mode from 'TIMESTAMP' to 'SIGNATURE', but still the same error(ORA-04062: TIMESTAMP (and not SIGNATURE) of function has been changed)...
We are stuck here not knowing what to do. It would be helpful if you can assist me here with any idea on why this is happening? The only solution we found right now is to restart the tomcat on application servers. This resolves the issue to 100%. Would this mean there is a problem with my database connection in the application?
Thank you,
Pradeep.

The only solution we found right now is to restart the tomcat on application servers. This sounds to me as though TomCat is caching information about procedures & functions & does not know they have changed.
04062, 00000, "%s of %s has been changed"
// *Cause: Attempt to execute a stored procedure to serve
// an RPC stub which specifies a timestamp or signature that is
// different from the current timestamp/signature of the procedure.
// *Action: Recompile the caller in order to pick up the new timestamp.

I forgot my iCloud password and now i can't change it , because my Apple ID has been disabled for security reasons .. so what could i do now ??

Today i tried to download one application ande when i typed my apple id pasword somthig was wrong "Your account is disabled. This Apple ID has been disabled for security reasons . Tap reset to reset our account. " When i tried to reset my accout there was this messege that my password wasn't correcr . But there was no way .. i'm sure that this was my password . So i made a new Apple id but now there is another problem i can't change my iCloud id because i forgot my old password and there is this application "Find my iphone " which i can't delete .. so what could i do ??

Hi 25091996,
Thanks for visiting Apple Support Communities.
If your Apple ID is disabled for security reasons, try resetting your password via the web using the steps in this article:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
You may not be able to change your iCloud email address, but once your password is reset you can remove your iPhone from Find My iPhone using the steps in this article:
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/ph2702
If you're not sure why your Apple ID was disabled, you may want to contact Apple support for more information:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Best Regards,
Jeremy

Here's a fix for "This item cannot be updated because it has been changed by another user or process"

https://gallery.technet.microsoft.com/System-Center-Service-fca7af29
A few months ago on the Technet Gallery, I submitted this custom control to be used on SCSM console forms. The purpose of the control is to eliminate the "This item cannot be updated because it has been changed by another user or process" error
message that we all have seen at least once (a day :) ).
The details are in the gallery description (along with installation instructions for existing forms and your own custom forms).
Here's a "short" description (nothing I ever post here is short :) ): This is a custom control that can be applied to an SCSM form like the Service Request form or Windows Computer form or your own custom form built with the authoring tool or Visual
Studio. When you click "OK" or "Apply" on the form, this control scans the form and Service Manager's database for any changes to the object you have open. If a property that _you_ have changed on the form was _also_ changed in the CMDB
(by a workflow or another user), this control will present a dialog box letting you know what happened. It will also let you choose which value to keep (yours, theirs, or the original value).
Just as importantly (and important in a greater percentage of cases), if a workflow changes a "background" property (like FirstAssignedDate) while you have the form open and you click OK, the control will detect the change and allow the form submission
to go through while keeping your changes and the FirstAssignedDate change that the workflow made. You won't get an error message or even a warning. And most importantly, you won't lose your changes.
That's where the "optimistic" part of the control's name comes from. It applies optimistic concurrency control to SCSM forms, while also providing an anti-collision interface for you to use so you no longer lose any of your changes.
Furthermore, this control will work on related items that are opened in memory; for example, the activities on a Service Request. So if you change an activity's title while the workflow engine sets it in progress, you won't get an error. The activity will
be in progress and will get your new title when you click OK or Apply.
Lastly, (and I admit this part is getting into the deep inner workings of console forms) if your form loads a sub projection at run time (to the root object) this control will detect the load and treat that sub projection as if it were apart of the original
form all along.
I've gotten a little feedback about this control, but I'd like to get more since it's a work in progress. So, I'm announcing it here on the forums. Please give it a try and let me know if you have any questions. I'll be happy to answer them here. Thanks,
folks!
Oh, and to answer the most common question right away: It's free. There is no paid version or anything like that. This is something I built for the SCSM community.

Great job!
Will definitely try it out.
Best regards,
Marcus

My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

Read and follow Apple Support Communities contributor Niel's User Tip: kmosx: I accidentally set a disk's permissions to No Access

When using tethered capture I often get this notification "The metadata for this photo has been changed by both Lightroom and another application". This slows or stalls the loading of incoming photos. How do I find out which other application is changing

When using tethered capture I often get this notification "The metadata for this photo has been changed by both Lightroom and another application". This slows or stalls the loading of incoming photos. How do I find out which other application is changing the metadata and stop it?

Thanks Sean,
I've had a look at the TC settings dialog and tried to keep it as simple as possible. I also had a copy of LR 4 on the hard drive so have trashed that also incase of any conflicts. LR seems to be running ok now but as said it's an intermittent problem.
I also have a copy of Capture One on the hard drive so am going to uninstall that also in case it is trying to launch.

Message regarding Metadata for this photo has been changed

We recently transferred from PC to Mac. We now get, over each image, an icon that when you hover over it the message says, "The metadata for this photo has been changed by both Lightroom and another application. Should Lightroom import settings from disk or overwrite disk settings with those from the catalog?" What should our action be please?

Normally, that message indicates that another program has changed the photo's metadata on disk after it was imported into the LR catalog. But sometimes LR generates that message spuriously, i.e. it's a false alarm. In this case, I think it is likely a false alarm, and you should choose Overwrite Settings. However, before you do so, make sure you have a good backup of your catalog, just in case. See Lightroom Help | Back up a catalog for how to make a manual backup of your catalog when LR exits.

My AOL login for iTunes has been changed to an inaccessible e-mail address

I was using my AOL account for iTunes (lets call it [email protected]) but as of April 1st it no longer works. Previously I would login with SCREENNAME + my password, now it's saying my ID has been changed to [email protected] I don't have an AIM account because I had AOL and could access AIM (AOL Instant Messenger) by logging in to my AOL account. Now when I attempt to login it says it's been changed to [email protected], but when I try to access it the old password doesn't work. When attempting a password recovery Apple sends the e-mail to [email protected] instead of [email protected] How do I change this?
Also none of the above is my Apple ID, let's say it's [email protected] When I login to iTunes with [email protected] it shows that I have no App purchases.

3 days later and I finally get a response. The response was basically writing what my question was in a statement then asking if that solved my problem. I am absolutely disgusted by not only the delay in response but the complete lack of attempting to read what my problem is, my iTunes customer support agent simply copied and pasted the information listed here: AOL Usernames can no longer be used with the iTunes Store - Apple Support.
OH, and the issue of apps trying to update themselves is back again for no apparent reason.

There were no results for Hi there, I have been using gmail Id and that has been changed by someone into a hotmail apple id whenever I wanted to sign into my account. I am really really troubled a lot. I have also successfully created another apple ID and

I have been using gmail Id and that has been changed by someone into a hotmail apple id whenever I wanted to sign into my account. I am really really troubled a lot. I have also successfully created another apple ID and password after a lengthy process and tried to go and get downloads, I was asked for my apple id and again the same problem came back and I couldn't be able to use my new account and use apple downloads from iTunes , etc. please, help me as soon as possible. Yimenu

Apss are forever tied to the Apple ID under which they were originally purchased. If you forgot the password to your original Apple ID, you can retrive it here:
https://iforgot.apple.com

TS2446 im trying to change my password for my apple id but its says that my account has been disabled for security reasons, how can i solve this problem?

im trying to change my password for my apple id but its says that my account has been disabled for security reasons, how can i solve this problem?

Depending on why it's been disabled you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
If it then works on your computer's iTunes but not your phone/iPad then try logging out of your account on the phone/iPad by tapping on your id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on it

Urgent:Tnsname host has been changed for informatica

Similar Messages

Maybe you are looking for