Urgent: Transport Connection Conversion: Wrong Setting : How to correct

Hi Friends In our BI Ssystem somebody have wrongly put the Settings in Transport Connect -- "Conversion Button" The entry as DS4CLNT200 (Development BI System ---QS4CLNT200 (Quality BI System))
Which should never be the case . It should always be DE4CLNT200 Development ECC System - QE4CLNT200 Quality ECC System.
Please help me how to resolve this I just want to delete it but when i try deleting it gives error that entry not found in DE4CLNT200 . I guess it is already assigned now.
please help me , will really appreciate it .how to delete this.
Thanks
Poonam

Hi Poonam,
Please take a look at this OSS note - 524554 (Storing destination in the BW environment), 325525 (Copying and renaming system in a BW environment).
Hope this helps,
Bye...

Similar Messages

  • I'm suddenly getting the kernel panic message and constant restarts when connected to the time machine wireless network. if is switch to the BT network, all fine. no help found so far as to what's wrong or how to correct, anyone have any thoughts...

    Recently upgraded to mountain lion in order to buy the new tall tower for time machine backups. had to get technical support to help with set up as it wouldn't play ball with two computers. all working fine up until last week when the iMac started getting backup error messages. then system restarts independently when using time machine on the time machine wireless network. only stops restarting when I switch the wireless network back to he bt one, which is a pain obviously as can't back up to time machine then.  it has to be a problem with airport utility or something wireless but all says all up to date with software etc. all still works fine backing up from laptop on the wireless network, just the iMac is not happy. any help or thoughts very much appreciated.

    Hi, many thanks Bob, what you say is not unthinkable at all, although it does answer the question
    "what could I do *instead* of ..." rather than the one I actually asked, but seriously ...
    Shutting down might be an answer, although it would clear out my tmp directory - which I might not want to have to sort through looking for things I want to save every time I go to work, and also, now that nvram doesn't seem to work for disabling the boot chime, it can get a bit embarassing booting up in a busy meeting if I have forgotten to mute before I shut down. There are all sorts of other issues, such as editing documents, loading web pages and so on that I would have to set up again.
    Your suggestion of letting Apple know is a good one - thank you for the link.
    Take care,
    Mark

  • Customer sent money to wrong bank, how to correct?

    My client has multiple LE and multiple banks. Their customers sometimes do business with many of these businesses. Occasionally that customer will send their payment to the wrong bank account. What is the best way to get this to the correct OU? My thought was to reverse the misc receipt in the wrong OU, and put it into the correct OU and do a bank transfer, or a journal entry. They want it tracked so that they can see it was in the wrong bank and moved to the correct one so that they can reconcile properly. Is there a more complete way of doing this?
    Regards,
    GP

    Last May 9, 2015, I have withdrawn my paypal money and sent it to my bank account. After weeks of waiting, I have check my bank accounts and surprised that one of my bank account was closed. And it happened to be the account that I sent my paypal money. I tried to email paypal many times and ask for help and all I received was just an automated response and never get my answer. I have tried to call paypal but I can't talk to a person. I am outside the US and I am desperate to know where is my money! It should be back to my paypal account but apparently not. Please, I need help and answer!  

  • GR qty wrong. How to correct it?

    Hi ,
    We have performed GR few months ago. We just realize that, the GR posted 1000kg in SAP system (it should be 999kg only).
    Since we are not possible to reverse the GR as it was consumed.
    Please guide me what is the correct way of doing? Any impact on my GRIR posting?
    Option 1. GR 1000kg, IR 1000kg, credit memo 1kg
    Option 2. GR 1000kg, IR 999kg
    Thank you very much

    Hi:
              Since goods have been consumed so there is nothing that can be done with your good receipt. However the possible way to treat this is to post invoice at full amount in MIRO and then post a subsequent credit to vendor of value equal to 1 Kg in MIRO.. There is an option given in MIRO for subsequent credit if you see on top. I hope it will help you.
    Regards

  • RE:Transport connection

    Hi SAP Guys...
    this is khaja...
    can any one explain me the following one...
    1.what is a Transport connection?.how do we collect the objects in Transport connection?.after collection how do keep into one request?.
    Regrds.
    khaja

    In SE09 & SE10, under "Elements of the Query Builder" node, u can see the query names something like below, which is same as the technical name (not description) in Transport Connection..
    4CXFEN58FRLEKDNDNG9AACM3I
    4CXFENCWYQ74306TTABMKEKTA
    In the Query Designer
    tech. name : ZDZAS_MP01_Q101
    Description : Number of Processes
    But when comes to Transport Connection
    Description : Number of Processes
    tech. name : 4APUSIVVA4NN3QZK65YRJVROE
    whatever tech.name in Transport Connection, that will apper in SE09 & SE10
    Edited by: Mr. V on Mar 20, 2009 5:24 PM

  • How to correct spelling and grammar mistakes in Pages?

    So I'm new to Mac's and the Pages wordprocessing software. Normally, in Microsoft Word, when something is misspelled or grammatically incorrect, the red or green line comes under it and you can right-click that to see options to correct the error. Pages also does the red or green line thing under incorrect words and stuff, but since you can't right click on a Macbook, how do find out what's wrong and how to correct it? Basically whats the Pages parallel of right-clicking to correct in Word?

    Launch Pages.
    Click "Pages" in the menu bar.
    From the dropdown select "Preferences".
    For additional info:
    http://support.apple.com/kb/PH10319
    https://discussions.apple.com/message/17227397#17227397
    Pages User Guide:
    Scroll up the page for contents.
    http://manuals.info.apple.com/en_US/Pages09_UserGuide.pdf
    Best.

  • How to transport InfoObject Conversion Routine

    Hi,
    I am using an existing coversion routine to my InfoObjects, this conversion routine is a custom object which already existed in Dev created by someone and i have just used it for my InfoObjects, now how can i transport this conversion routine to CONS, is it enough if i just transport the INPUT and OUTPUT function module.
    Thanks
    Akila. R

    hi Just go to the transport Connection, select the infoobjet automatically the conversion routines will be associated with it no need of collecting it seperately .
    for example
    ALPHA conversion is used in the BW system for each presetting for character characteristics. The ALPHA conversion routine is registered automatically when a characteristic is created. If you do not want to use this routine, you have to remove it manually.
    The ALPHA conversion routine is used, for example, with account numbers or document numbers.
    For conversions from an internal to an external format (function module CONVERSION_EXIT_ALPHA_OUTPUT) the process is reversed. Blank characters on the left-hand side are omitted from the output.
    CONVERSION_EXIT_ALPHA_OUTPUT ths functional module will be transorted automatically with out your notice
    hope this helps
    santosh
    Edited by: Santhosh Nagaraj on Sep 16, 2009 2:59 PM
    Edited by: Santhosh Nagaraj on Sep 16, 2009 3:00 PM

  • HT3728 My Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

    y Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

    Giancarlo Messalli wrote:
    1) are you sure a reset holding the reset button will not delete my data?
    Absolutely sure.. There is no connection at all.. reset is only the router side of the TC.
    For the hard disk to be erased you need to access the airport utility disk page.. request erase and confirm the operation.
    2) I can access to time capsule by ethernet but I am not able to input the corret setting by myself
    Thank you again
    I am uncertain why if you have access you cannot change settings.. but that is why you reset things so any of those problems should be fixed.
    Here is the Apple info on reset.
    http://support.apple.com/kb/ht3728
    And here is the quote from the horse's mouth so to speak.
    Factory default reset: Perform this reset if you wish to repurpose the AirPort Base Station or Time Capsule and want to remove all personal profiles and settings first. This reset resets the device to its state when you first purchased it. Data stored on internal or external hard drives connected to the device will not be erased. If you choose, you may manually erase the hard drive using AirPort Utility.

  • I was listening to music on my ipod shuffle when it went off.It hasn't turned on since then.When i connect it to the computer,the connection and disconection sounds play continuously without the ipod showing.What could be wrong or how can i get it to work

    I was listening to music on my ipod shuffle when it went off.It hasn't turned on since then.When i connect it to the computer,the connection and disconection sounds play continuously without the ipod showing.What could be wrong or how can i get it to work?

    Hello,
    I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch, so I will try to find a solution to your problem.
    Hold down the Sleep/Wake and Home buttons for at least 10sec. or until Apple logo appears (Nothing will be lost, this is just a "Hard Reset")
    Hope that helps!
    If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
    Cheers!
    Pizza98704

  • Help urgently needed, I have installed Logic Pro 9, since then my Final Cut Pro X keep freezing. Anyone what is wrong and how to solve it? I desperately need help on this. Thanks

    Help urgently needed, I have installed Logic Pro 9, since then my Final Cut Pro X keep freezing. Anyone what is wrong and how to solve it? I desperately need help on this. Apple support says I have to pay £85 for to help me. Thanks

    Just a word of advice. Never ever use the word "urgent" on this forum

  • How to test if connection pool is set up correctly in WL 7 SP 7

    Hi all,
    2 questions.
    1) how do i test if the connection pool i set is working? in the testing tab of the jdbc connection pool in the console page, there is a Test Table Name, i entered 'dual' in the text field. After i clicked apply, there is no indication if i set it up correctly.
    2)After i configure the connection pool, do i need to configure the data sources?

    Could you please try using a "Test_When" statement?
    Karthik

  • How to choose request in transport connection?

    Hi all,
    I need your help. How can I to choose in which request I will include objects in transport connection?
    Thanks,

    We have two types of requests for BW objects..
    1. Customizing Request
    2. Workbench Request
    and another One for Bex objects
    Depends on the object type the corresponding requests are assigned.
    ie During activation on prompting screen when you click creation buttion or assignment only corresponding request type will be created/displayed depends on object type.
    In other way if you do it from RSA1-> Transport connection, it will allow you to assign only in the right request type with respect to object type else system through you a error with analogous message.
    You can create request by different way.
    Type 1. During object creation/activation, in prompt you can create a new request else you can assign in existing request.
    If you are not getting the prompt during activation then reason is two..
    a) Object is in $TMP development class where transport is not possible.
    Here go to menupath Extras->Object directory entry->select object..(Assign in appropriate package/development class)
    b) Object is already in the request, from se09 you can find the request where object is locked
    Type 2. Creation of request from SEO9.
    Go to SE09, Select appropriate request type radio button and click ok.
    You can directly add the object inside the request if you know the object type and other required details.
    Even here you can move the objects from particular request to another request by clicking on option"Include object"
    Type 3. Creation and assignment of object from RSA1
    From RSA1-> Go to tab Transport connection.
    Collect all your required object similar to business content installation.
    Click on truck button you will get a prompt where depends on the situation you have to create/assigne development class and create/assign requests.

  • My iMessages and FaceTime are not shooting on my iPad 2 it says my network connection is wrong but I have full wifi how do I shoot them?

    My iMessages and FaceTime they won't let me set up them they say my network connection is wrong but I have full network connection iPad 2

    Check Settings>General>Date & Time>Set Automatically>On. Make sure that the time zone setting is also set correctly.
    If that didn't solve the problem, restart your iPad and try again. If that fails, reset your iPad and try again.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Was setting up my ipad, turned it off. Came back turned it on and after you select ur country step it came up with "connect to itunes" logo, how do i fix this? And i dont have a computer.?!

    Was setting up my ipad, turned it off. Came back turned it on and after you select ur country step it came up with "connect to itunes" logo, how do i fix this? And i dont have a computer.?!

    Reboot the computer then try placing the iPod in Recovery mode and then restoring via iTunes.
    Next try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • I'm selling my iPhone 3GS so I set it back to factory settings. I cannot unlock the phone, all it says is "connect to iTunes". How do I fix this?

    I'm selling my iPhone 3GS so I set it back to factory settings. I cannot unlock the phone, all it says is "connect to iTunes". How do I fix this?

    Once you get it going you need to make sure you do the following so that you can sell the phone.
    Turn off imessage in settings/messages
    Turn off Facetime in settings/Facetime
    Delete icloud account in settings/ilcoud
    Erase all data and settings in settings/general/reset
    Delete the phone from your profile in  https://supportprofile.apple.com

Maybe you are looking for