Urgent Transport Question

I have already transported a few cubes, DSO's and info objects from dev to QA system in finance. I have to do the transports for HR. I have a few infoobjects in HR which are there in finance too (like 0country, etc) and which have already been transported during FI transports. What should i do, shud i deselect these info objects when i create request in transport connect or can i transport them too. If i transport them, will there be a conflict.
Thanks,
Neha.

Hi Neha,
Don't panic first, There is no need of deselect infoobjects when creating request in RSA1. And if you transport them also there will be no conflict, just remind you that there are Five grouping options are available while transport
Only necessary objects
In data flow before
In data flow afterwards
In data flow before and afterwards
Save for system copy
Example:
If you choose collection mode In data flow before and
afterward, you probably will collect at the InfoProvider level
(Cube or ODS)
If you choose Only necessary objects, you probably will
collect at an InfoObject level
Its always best to choose In data flow before and
afterward,
Hope this help, if it help you pls assign point.
Atul

Similar Messages

Transport Questions and Questionnaires from Dev to QAS or to PRD

Question
How do we transport questions and questionnaires from dev to QAS or to PRD. Do you type all them again or there is process no. What is best process others do
Answer
As you must be aware, Questionnaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
At least Iu2019m not aware of any other way to move the Questionnaire details across clients.
I know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment
Any body has soloution ?
Thanks.
Saquib
http://aspirehr.com/HCM_solutions/hcm_solutions.asp

Hi Vishal,
As you must be aware, Questionaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
Atleast i'm not aware of any other way to move the Questionnnaire details across clients.
i know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment.
So if you are a part of the Implementation Consulting team, it is your responsibility to train the core team in doing the activity in live environment. Hope this information helps.
Best regards
G Raj

Urgent SQL question : how to flip vertical row values to horizontal ?

Hello, Oracle people !
I have an urgent SQL question : (simple for you)
using SELECT statement, how to convert vertical row values to horizontal ?
For example :
(Given result-set)
MANAGER COLUMN1 COLUMN2 COLUMN3
K. Smith ......1
K. Smith ...............1
K. Smith ........................1
(Needed result-set)
MANAGER COLUMN1 COLUMN2 COLUMN3
K. Smith ......1 .......1 .......1
I know you can, just don't remeber how and can't find exactly answer I'm looking for. Probably using some analytic SQL function (CAST OVER, PARTITION BY, etc.)
Please Help !!!
Thanx !
Steve.

scott@ORA92> column vice_president format a30
scott@ORA92> SELECT f.VICE_PRESIDENT, A.DAYS_5, B.DAYS_10, C.DAYS_20, D.DAYS_30, E.DAYS_40
2 FROM   (select t2.*,
3               row_number () over
4                 (partition by vice_president
5                  order by days_5, days_10, days_20, days_30, days_40) rn
6           from   t2) f,
7          (SELECT T2.*,
8               row_number () over (partition by vice_president order by days_5) RN
9           FROM   T2 WHERE DAYS_5 IS NOT NULL) A,
10          (SELECT T2.*,
11               row_number () over (partition by vice_president order by days_10) RN
12           FROM   T2 WHERE DAYS_10 IS NOT NULL) B,
13          (SELECT T2.*,
14               row_number () over (partition by vice_president order by days_20) RN
15           FROM   T2 WHERE DAYS_20 IS NOT NULL) C,
16          (SELECT T2.*,
17               row_number () over (partition by vice_president order by days_30) RN
18           FROM   T2 WHERE DAYS_30 IS NOT NULL) D,
19          (SELECT T2.*,
20               row_number () over (partition by vice_president order by days_40) RN
21           FROM   T2 WHERE DAYS_40 IS NOT NULL) E
22 WHERE f.VICE_PRESIDENT = A.VICE_PRESIDENT (+)
23 AND    f.VICE_PRESIDENT = B.VICE_PRESIDENT (+)
24 AND    f.VICE_PRESIDENT = C.VICE_PRESIDENT (+)
25 AND    f.VICE_PRESIDENT = D.VICE_PRESIDENT (+)
26 AND    f.VICE_PRESIDENT = E.VICE_PRESIDENT (+)
27 AND    f.RN = A.RN (+)
28 AND    f.RN = B.RN (+)
29 AND    f.RN = C.RN (+)
30 AND    f.RN = D.RN (+)
31 AND    f.RN = E.RN (+)
32 and    (a.days_5 is not null
33           or b.days_10 is not null
34           or c.days_20 is not null
35           or d.days_30 is not null
36           or e.days_40 is not null)
37 /
VICE_PRESIDENT                     DAYS_5    DAYS_10    DAYS_20    DAYS_30    DAYS_40
Fedele Mark                                                          35473      35209
Fedele Mark                                                          35479      35258
Schultz Christine                              35700
South John                                                                      35253
Stack Kevin                                    35701      35604      35402      35115
Stack Kevin                                    35705      35635      35415      35156
Stack Kevin                                    35706      35642      35472      35295
Stack Kevin                                    35707      35666      35477
Stack Kevin                                               35667      35480
Stack Kevin                                               35686
Unknown                             35817      35698      35596      35363      35006
Unknown                                        35702      35597      35365      35149
Unknown                                        35724      35599      35370      35155
Unknown                                                   35600      35413      35344
Unknown                                                   35601      35451      35345
Unknown                                                   35602      35467
Unknown                                                   35603      35468
Unknown                                                   35607      35475
Unknown                                                   35643      35508
Unknown                                                   35644
Unknown                                                   35669
Unknown                                                   35684
Walmsley Brian                                 35725      35598
23 rows selected.

Urgent BWD-BWQ transport question

Hi Guys,
Unfortunate i delete the info object from C/S, T/S,T/R,U/R,ODS and I/Cube.. now i want to transport the same above the Structures from BWD-BWQ is't posible for this, If posible then what is procedure for transport help me guys....
If not what are the steps i have take .........
Thank you
DST

Hi DST,
If you have the same oject available in BWD the u can create a new CTS , include the object in question and retransport or if u know the request u used to transport this object previously to BWQ then u can re import the same request again to BWQ ....need not worry abt other objects in the request.
Hope this helps
Anand Raj

Extremely Urgent : Transport of KM Content through ICE Protocol

Hello Friends,
This is really urgent.
I have been transporting XML content in KM folders through ICE protocol.
But of late the problem is that I am able to download the KM foledrs in .zip format in my Desktop but of late when I am trying to upload it in the TEST Server through Content Exchange it gives me a Page cannot be dispalyed error in the Content Exchange Window.
Please help me out. Initially I had problems in downloading contents but now there is problem with uploading.
I need to transport the KM contents to TEST and PRODUCTION servers immediately. If there are any other methods of doing the same do tell me.
Wating for ur reply.
Sweta.

Hi sweta,
u cn refer to these links....its useful to u........
How to Export KM Contents by ICE protocol using Offline Channel :
How to Export KM Contents by ICE protocol using Offline Channel
How ToDistribute KM content using the ICE protocol(both online & offline scenario):
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/38effdbf-0d01-0010-c3ad-9d9547a492af
Getting started with ICE:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0883c3b-ca84-2910-c0ad-80f8e8756275
Regards
Bhargava
award if it helps

Urgent 508 Question!

The only thing i need to do is add a title or label attribute to some of the controls.
One of the ones to begin with that i am fixing is the ADF tag af:selectBooleanRadio. When i add some text to the shortDesc field of the control, the html is produces doesn't have the title attribute.
So i tried to use the corresponding trinidad control tr:selectBooleanRadio, and add some text to the same shortDesc field for the control, and in this case it does add a title attribute in the html that it produces.
Everything else in the code works fine as well when i add the trinidad control, except for one thing. I have a ValueChangeListener that gets called when you click on another tr:selectBooleanRadio. Within that valueChangeListener event handler function, i have a bunch of code which in the end displays a af:popup. The problem i am having when using the trinidad control is that it somehow is not allowing the display of the popup even though it is going through the code that executes display of the popup. When i click on another link or button that is supposed to display a different popup as well, then the popup associated with the tr:selectBooleanRadio also displays at that time, but not originally when the value changed by selecting a different tr:selectBooleanRadio.
So, my question is, are there any other successful ways of adding a title attribute to the these controls. If its the af:selectBooleanRadio how do we make it so that the html it generates has the title attribute, or if its the tr:selectBooleanRadio, what might be happening during the event handling that it is not allowing the af:popup to display?
A quick response to this appreciated since this is very urgent! Thanks very much for your help!

JDev version is 11.1.1.5
ok, i will go one step at a time so that it is easy to understand. So i will only mention the first thing right now and then we can try other things later.
i have a af:selectBooleanRadio. After running the page/application, when the user does View Source in the browser for the page that has the radio button, it is in the form of an HTML tag <input> of type for radio button. What i want to do is to have a "title" attribute for the <input> tag for this radio button. I can use the tr:selectRadioButton trinidad control to do that, but then i have other issues with that, and we can talk about those later.
Let me know if it is still not clear.
Thanks very much for your help!

URGENT : Challenge questions query: Oracle Access Manager 10g

Hi all,
This is a query regarding password challenge questions in Oracle Access Manager 10g. We have created password policies for a specific container in OID (say cn=xxx,cn=users,dc=oracle,dc=com) and it is working fine.
In order to exclude certain set of users (say user ABC ) for password policies, we have set the obpasswordchangeflag to false for those users which are in same container for which password policy is created.
When we try to login to the application with the user say ABC, I am not seeing any reset password page - I am happy till this point. However it is showing Configure Challenge questions page. Is there any way to bypass this page? Or is this the expected behavior?
This is very urgent and prompt reply is very much appreciated.
-Mahendra

Hi Mahendra,
This is expected behaviour. In order to exclude the password policy management for some certains user for particular domain/container. please add the below configuration parameter to your OAM10g password policy.
Password Policy Filter Field (!(|(cn=xxx)(cn=abc)))
----Ajay

URGENT: TRANSPORTING APPRAISAL TEMPLATE

Dear Friends,
I had created an appraisal template in my SandBox development client.
I then downloaded it and then uploaded it in the Golden Masters Client.
I also created a transport request at the time of saving the template in Golden Masters.
In my Testing client, I used SCC1 to transport the template and other appraisal settings from Golden Masters to the testing client.
Now, when I execute Tcode: APPCREATE in my testing client, the systems returns a message "No template found".
What might be the problem?
How can I solve it?
Please help, its urgent!!!
Regards
AXE

Hi axe
For transporting from one server to another server dont use scc1 use se09,se10 for using transport request and then try yaar definetely you will get i think so you are mirroring from one client to one client you are not transporting.
bye
naveen

PSA Deletion Process in Process Chains Transport Question

BI Guru's
I am working on investigating a method of deleting PSA Requests this will be a stand alone process so no loads will be done in this process chain. My question I cannot use the Object Type of InfoPackage or DTP since these objects wont be in the Process Chain leaving me PSA Table option but since I will be developing this in Dev and transporting through environment into prod how will this be handled since PSA tables change from system to system? Does the system automatically translate it for me or will the value stay the same?

Hi Alex,
System will automatically identifies the table in quality and then in Production system. You do not have to worry. I had same question and I tested it with transporting the Process chain from developement to quality. In quality system automatically identified the table corresponding to data target/Master data.
Regards,
Kams

Urgent constructor question..

I'm trying to call this Flower class in another class called Garden, in which I created a new Flower by using a statement
private Flower lastflower;
and it's saying it cannot find the symbol - constructor Flower.
Can anyone tell me why and help correct this problem?
Below is the code for my Flower class.
Any help is really appreciated, it's for my Java class!
import objectdraw.*;
import java.awt.*;
* Write a description of class Flower here.
* @author (your name)
* @version (a version number or a date)
public class Flower
    protected FilledOval dot;
    protected FilledRect stem;
    protected FilledOval petal1;
    protected FilledOval petal2;
    protected static final int boundary = 100;
    protected RandomIntGenerator colorGen =
            new RandomIntGenerator(0,255);
    protected Color petalColor;
    protected Boolean flowerContains=false;
    private DrawingCanvas canvas;
    public void changeColor(){
    dot = new FilledOval(150,150,15,15, canvas);
    dot.setColor(Color.YELLOW);
    petalColor = new Color(colorGen.nextValue(),
                                colorGen.nextValue(),
                                colorGen.nextValue());
    petal1.setColor(petalColor);
    petal2.setColor(petalColor);
    public void grow(Location point){
    stem = new FilledRect (dot.getX()+3, dot.getY()+10, 10, 10, canvas);
    stem.setColor(Color.GREEN);
    if (dot.getY()>boundary){
        dot.move(0,-4);
    else{
     petal1 = new FilledOval(dot.getX()-12, dot.getY()-25, 40,70,canvas);
     petal2 = new FilledOval(dot.getX()-25, dot.getY()-10, 70,40,canvas);
     dot.sendToFront();
     stem.sendToBack();
     petal1.setColor(petalColor);
     petal2.setColor(petalColor);
    public Boolean flowerContains(Location point){
        if (petal1.contains(point)){
            return true;
        else if (petal2.contains(point)){
            return true;
        else if (dot.contains(point)){
            return true;
        else{
            return false;
}

I don't care how fucking urgent you think it is, it isn't to us. We will answer your question when and how we feel llike it. Have some manners and if you must, then bump your original post. Don't create another time wasting piece of crap!

Edge Transport Questions

Existing Exchange 2013 SP1 install with 1 DAG and 2 members. We are thinking about deploying an edge server but have some questions as to the current setup and benefits of edge in current setup. Our current setup:
2 servers with all roles
1 DAG
McAfee Security for Microsoft Exchange (AV/spam product)
Our Sonicwall does NAT load balancing between the 2 servers. So with an edge transport server, would that negate the existing load balancing?
Our active copy server has a reverse pointer with our ISP. With an edge transport server, we would have to let our ISP know of the new edge server, so it will resolve to the edge server?
Our current servers have McAfee product installed for AV/spam etc. How much does this negate the need for an edge transport server? If we do go with edge transport server, we will need to uninstall McAfee on the current servers and install on the edge server?

Hi forgiven,
Thank you for your question.
1.Our Sonicwall does NAT load balancing between the 2 servers. So with an edge transport server, would that negate the existing load balancing?
A:Exchange Edge could negate the existing load balancing.
2.Our current servers have McAfee product installed for AV/spam etc. How much does this negate the need for an edge transport server? If we do go with edge transport server, we will need to uninstall McAfee on the current
servers and install on the edge server?
A: we suggest A/V install on Edge server when Exchange edge deploy, then we could disable A/V on internal Exchange server.
3.How are logs handled on the edge server? Will we have to search multiple servers for logs are can we consolidate the logs?
A: we could backup it.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

Copy Function Group to New Name: Transport Question

When I did this I only see in the transport Function Group with the Function Group Name under it. I would have expected to see all of the objects but I guess not?
I suppose everything will go under thge Function Group name? ie. Includes, Function Modules, etc.?
Thank-You.

When I see a thread title like this, the first question I think is "Why copy the function group".
Copying a complete function group leaves your system very open to future data corruption and other problems as patches etc change the code in the original group but do not get reflected in your copy. A repair or enhancement to the original object has the advantage that SPAU will highlight any new versions from SAP allowing you to confirm that your change is still needed.
Another option is to create a custom function that calls the standard code with customer specific pre and post processing. If both the standard and custom function are needed, then including logic based on transaction code, calling report, etc can handle this.
It is interesting to work on the upgrade of a system where there has been significant copying of SAP code - you compare the "Z" version with the original SAP code in the pre-upgrade system and nearly always find differences due to OSS notes etc that were applied without thinking of the customer copy.
Andrew

[Urgent] Some questions about Oracle Portal 10g - 11g upgrade

Dear friends,
We are under doing upgrading assessment of Oracle Portal from 10g to 11g. After reviewed the 'upgrading guide', we still have some questions as below:
1. Whether the 'Instant Portal' feature remain in Oracle Portal 11g? If yes, how to migrate the Instant Portal 10g sites? If no, any workaround?
2. Whether the old 10g Page Group and Pages will be still available after 11g upgrade? Also can customer import the old 10g transportset into Portal 11g?
3. How about the customized Portal 10g objects (such as customized template, style, attributes) after 11g upgrade? Still be usable?
4. Customer use PDK to develop many portlets in 10g. Can they use JDeveloper 11g to migrate their old project to 11g automatically?
Thank you in advance and any comment are welcome.

1. Whether the 'Instant Portal' feature remain in Oracle Portal 11g? If yes, how to migrate the Instant Portal 10g sites? If no, any workaround?Instant Portal is not available anymore in Oracle Portal 11g. The Instant Portal page groups will be migrated to standard Portal page groups. Maintenance of the Instant Portal can be done with the standard Portal tools. The Instant Portal tools are not available anymore.
Whether the old 10g Page Group and Pages will be still available after 11g upgrade? Also can customer import the old 10g transportset into Portal 11g?Old 10g Page Groups are migrated to Portal 11g. They will still be available after the upgrade.
Export/Import through transports sets has always been limited to instances of the same version. It is not supported between versions as documented in the Administration Guide :
[11.2.1|http://download.oracle.com/docs/cd/E14571_01/portal.1111/e10239/cg_imex.htm#CCJBCCGD] System Requirements
Before exporting and importing content, ensure that your system meets the minimum system requirements, as described in this section.
Notes:
* Export and import functions only within the same release of Oracle Portal and the same patch release, for example, release 10.1.4 to release 10.1.4 or release 11.1.1 to release 11.1.1. You cannot export and import between two different releases, such as release 10.1.2 to release 10.1.4 or release 10.1.4 to release 11.1.1.
How about the customized Portal 10g objects (such as customized template, style, attributes) after 11g upgrade? Still be usable?Customized objects get migrated as well. Certain types (e.g. PL/SQL item types) need to be checked after upgrade as the behavior of the PL/SQL code may differ between database versions. This is particularly of concern when the 10.1.4.x Portal uses a 10.1 database. A database upgrade to either 10.2, 11.1 or 11.2 is necessary as Portal 11g is not supported with RDBMS 10.1.
Customer use PDK to develop many portlets in 10g. Can they use JDeveloper 11g to migrate their old project to 11g automatically?Never done this, but the Portal framework is able to consume JPDK providers which are running in older versions of the toolkit. If the providers are running in standalone OC4J containers, you would be able to upgrade the framework and keep the providers in their OC4J containers. This will allow you to focus on the framework first and worry about your providers later.
Thanks,
EJ

Simple Transport Question

Hi,
Let's say I made changes to a table and released from Dev client to Unit testing client for testing and then used scc1 to pick it up there. I realize that i have to make some further changes to table in dev client, so i repeat the process and save under a new transport. This happens a few times. Now I have 7 transports for same table. My question is do i need to release ALL 7 to QA server once i am done with unit testing? Or does the very last transport contain all the previous changes. I am confused please help.
Thanks

Ok I see what you are saying.
Here is how I did it.
Added Rows X and Y in transport 1 and released to unit testing client.
Deleted row X and added Z in transport 2 and released to unit testing client.
Added A and B in transport 3 and released to unit testing client.
So what you are saying is I will end up losing Y, X will still display and Z would not be added?
See the reason I keep saving to new transport is because once I release a transport I cannot see where I can add/modify to that transport again. Am I not looking at the right place? This is why I end up having so many transports. Is there way around this? I mean the only way I can unit test is if I transport and then I find inconsistencies I have to change my data again. I think everyone faces this issue. But does everyone have dozens of transports in the end? Is my process wrong.
Thanks!
Sana

Urgent: Transport Failure

Hi ,
In SE10 i have sucessfully transported the Workbench task. but while transporting the Workbench request i am getting this error " Test call of transport control program (tp) ended with return code 0212" .
   I have done the check also for the request and it shows no error
   Kindly help on solving this issue
   Suitable answers will be rewarded
Regards,
Kasi S

Hi,
The sapnotes 216703 seems to solve your problem.
Solution
Use a newer R3trans. The following versions are available on the service
machines. What is common to all of them is that they are registered with a date
as of 21.04.00 (or later).
1. 45B: This is R3trans version 6.05 (release 45B - 21.04.00 - 23:53:00).
2. 46B: This is R3trans version 6.05 (release 46B - 21.04.00 - 23:53:00).
Hopes it will help you.
Thanks,
Sriram Ponna.

Urgent Transport Question

Similar Messages

Maybe you are looking for