Urgent....Transported Update rules active version but still not active....

Hi Gurus,
i have changed a datasource and an ODSA
and this ODSA which also acts as a datamart to ODSB
so i have transported, transfer rules, transfer structure, infosource, update rules of ODSA and also the
update rules of ODSB as well
And before realsing the request into quality i have replicated the datasource from R/3 as well and then realsed this request to Quality everything is active like transfer rules, infosource, transfer structure
ODSA update rules
But the ODSB update rules are not active kindly tell how to make them active.
so again i have regenerated the export datasource and then again i transported only update rules of
ODSB.
but still the update rules are inactive, kindly someone guide me how to make them active
as i have to send this to production which is having 4 years of historical data so please kindly
help me.
thanks and regards
Harish

Hi A.H.P, vishvesh, anil, and buvanna
thankyou guys for your info and support i tried all that u have said
except activating them manually...as it is urgent i am going with manually activating
and vishvesh i could do check the update rules by basis help. thanks for that
A.H.P i have manually activated the update rules its working fine, so i am praying that everything should be fine in production as i have requested to have permissions to activate in prd as well
thankyou very much for all the support.
i am relieved that i have at last solved it
thanks and regards
harish

Similar Messages

No Crop tool in Adobe Camera Raw, have updated to 8.7 but still not there, how do I get full tool panel please?

Hi, I have the $9.99 Adobe CC package but in Camera Raw I do not have the full tool bar, went to Adobe site and downloaded Camera Raw 8.7 but still not there, I have Windows 7 on PC. Please can anyone help. Thanks.

Yes, in the camera-raw preferences you can set ACR to open as a plug-in when editing TIFs or JPGs. There are three settings -- paraphrasing: Don’t, Open all, and Open those with settings. You would want to set JPG’s setting to Open All at least temporarily.
Of course you can also use PS to crop, right?

I have downloaded new version, but still getting message "Urgent to Update". What do I do next?

I got the message that it was time to download the newest version of Firefox. I clicked, and followed the steps. It showed to be downloading, and it checked for viruses, etc. But the message is still showing that it is "urgent" that I download the newest version or I won't be protected. When I click the "Help" and "check for newest versions" it shows me there is nothing available. What should I do next??

Your user agent string (identifies the version of Firefox) is showing that you have Firefox 3.0.13.
If you have downloaded and installed Firefox 3.6.13, you may have an incorrect user agent string. Some add-ons modify the user agent string causing it to show an old version of Firefox even if you have the latest version installed. If this has happened you can reset the user agent string, for details of how to do that see https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
If the user agent string is correct, how did you install the new version? You mentioned downloading the new version but did not mention running the setup file that was downloaded to install the new version.

It's been a while that Im unable to copy music from itunes to my iphone. I updated my device to the latest version of IOS 5.1.1 and made sure no jailbreak is installed but still not working. please assist.

it's been a while that Im unable to copy music from itunes to my iphone. I updated my device to the latest version of IOS 5.1.1 and made sure no jailbreak is installed but still not working. please assist.

Assuming you are not manually managing your music, verify the following:
You are using the latest version of iTunes
On the summary tab of your iTunes sync settings you have checked "Sync only checked songs and videos"
In your music library you have checked all the songs you want to sync to your phone
There are no exclamation points next to any of the songs you want to sync to your phone
You have authorized your computer for all Apple IDs for purchased music you want to sync to your phone (in Store>Authorize this computer)
You have checked "Sync Music" on the Music tab of your iTunes sync settings
When everything looks correct, sync your phone.

HT4623 after updating my iphone 3gs from os 4 to os 5.1.1, it left with activating the phone but i've been trying since and is still not activating, the notification given is ''activition server temporarly unavilable". can somebody help me out?

after updating my iphone 3gs from os 4 to os 5.1.1, it left with activating the phone but i've been trying since and is still not activating, the notification given is ''activition server temporarly unavilable". can somebody help me out?

First use JPanel not Panel.
Panel panels[]=new Panel[4];becomes
JPanel panels[]=new JPanel[4];Then refactor your code so that you use arrays correctly:
panels=new Panel();
panels.setLayout(new FlowLayout(FlowLayout.LEFT));becomes
panels=new JPanel();
panels[i].setLayout(new FlowLayout(FlowLayout.LEFT));
I did the above changes to your code and it worked fine.
Dave

Transporting Update Rules

Hi,
I am transporting update rules for a Cube.
The InfoSource has been generated from a DSO and created update rules to the above said Cube.
In the transports I am getting the below error.
Start of the after-import method RS_UPDR_AFTER_IMPORT for object type(s) UPDR (Activation Mode)
Update rules 46H2HBH6BRHP9R29L0XREHQP3 read in version M
Update rules 46HK9D48LBRIH89ZBZVTZERTZ read in version M
Error when activating update rule 46H2HBH6BRHP9R29L0XREHQP3
Activation of the update rules for ZICUBE01 8ZDSO1
IC=ZICUBE01 IS=8ZDSO1 error when checking the update rules
Error when activating update rule 46HK9D48LBRIH89ZBZVTZERTZ
Activation of the update rules for ZICUBE04 8ZDSO04
IC=ZICUBE04 IS=8ZDSO04 error when checking the update rules
The InfoCube(It is already there in Q apd P) has been locked in a different user transport as he added a field to it and not yet transported.
Is this the problem?
Thans in advance..
Message was edited by:
        Indira SR

Hi indira,
make neccessary changes to the request if u created earlier i.e u can delete the original request or change the discrption to "Dont delete" and release it, if u unable to delete each task in that particular request.
Second step is activate all the infosources and cubes and Update rules.
Then create transport request individually i.e One for IS and One IC and another for Update rules..It would be easier to trace in case of any error.
Release the requests 4m DEV, and important thing is import these requests in Q or P in hierachiel manner i.e
1. IS
2. IC
and the Update rules request.

Transport update rules or ODS

Hi,
Do i need to transport update rules or ODS object first
Thanks

You can transport them both in the same transport. But if you have to separate them, then the ODS should go first.

After a notice of update, I was unable to use iTunes. It said I had a missing dll file and a Windows error 7. I removed iTunes and tried to reinstall. I selected the download items off the apple site. It says thank you but still not there.

Having problems downloading iTunes. After an update notice, I was unable to open iTunes. I de-installed and attempted to reinstall it and it still won't open.
The first error duirn the update was a dll file missing, then a Windows error 7. The screen on the Apple site say Thank you for downloading, but still not there.

A msi file is short for microsoft installer. It normally is for installation, removal, and maintenance for a program. So iTunes.msi would be used for the updating of the program. For some reason it isnt finding this so we can't update, install, or remove it.
From what I have seen windows installer cleanup utility solved related problems before.
I found this forum about removing and installing a new iTunes. It was about someone who was trying to isntall iTunes, and was looking for msi file and asked for help. Using this should allow you to be able to install iTunes. It won't give you the msi file but will allow you to isntall iTunes over again.
This was what was said.
Another option in case you can't get an msi. (Or even if you can ... the msi's mentioned in the messages may be damaged rather than missing.)
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Restart the PC, and try another iTunes install. Does it go through properly this time?

Since last update of Pages, my Pages app in iPad anda iPhone doesn't open, it closes suddenly. I already deleted it and reinstalled, but still not works.

Since last update of Pages, my Pages app in iPad anda iPhone doesn't open, it closes suddenly. I already deleted it and reinstalled, but still not works.
Can someone help? Do I need to wait for another update?
Thanks

This is my problem that has to originate from the update. So glad that I did not purchase a MacBook! Apple products/apps are appearing to be not different from Windows products.
I have deleted and reinstalled from the device and desktop, resets, etc. When I uninstalled and reinstalled while connected to my desktop, the older version of pages was installed. I was able to see all of my files that were saved to the cloud. I was forced to update again to access any of the saved files. Once updated again, I could no longer open pages. It began, to open and abruptly shut down.

I plug in my iPhone and this message showed. "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." I did this but still not working. Please advise

I have a problem with connecting my iPhone to iTunes. I uninstalled one of the computer program and restart my laptop. After restart my laptop and a message said that iTunes might not working because one of the component is missing and request to reinstall the iTunes. Hence I remove iTunes from my laptop and I reinstall iTunes to my laptop but still not working.
Before this the iTunes will automatically launch when I plug in my iPhone. But after I reinstall iTunes, it's not working. When I try to plug in my iPhone after iTunes launched and message "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." popped out. I did this twice but it's not working as well.
Please advise what should I do to fix this.

First make sue you are installing the 64 bit version of iTunes.
Second make sure it is iTunes 10.7 or later.
I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

TS4009 storage upgrade to iPod appears to be activated, but still not able to 'use' the extra capacity. Device will not allow extra downloads..?

storage upgrade to iPod appears to be activated, but still not able to 'use' the extra capacity. Device will not allow extra downloads..?

Welcome to the Apple Community.
Purchasing additional iCloud storage will not give you additional storage on your device.

I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!

I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!

Don't be afraid to bump this topic. There's also an App Store forum where you might repost this question, but give some of these details in your post. I'd rephrase the topic to something like "Can't use App Store to upgrade." (Instead of can't "open".) Then give the details.
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store

HT204406 I am not able to download my files from iCloud to my iPad using iTunes Match, my internet connection is alive as I tested with Safari, I have enabled iTunes Match on and off to be usre is active..but still cannot download....my music

I am not able to download my files from iCloud to my iPad using iTunes Match, my internet connection is alive as I tested with Safari, I have enabled iTunes Match on and off to be usre is active..but still cannot download....my music

I have the same problem on my Windows 7 computer. In the right-click menu for a song one option is DELETE. However when I click that option the next window is to HIDE instead of DELETE. Apple, please help us with this.

Update on all pages but still editable

I have a navigation bar that is slightly different for each page of the site. Based on the current page you are on, the corresponding navigation button is "pressed". The problem is that I need to change parts of the entire navigation bar a lot. For example, I may need to add a new button, or change the name on something. Is there any way to update all the pages, but still maintain the ability to edit them? It seems that when I try to use a template in order for it to update I cannot then customize it on specific pages.

A persistent page indicator on your site-wide menu would be a better option. That way you don't need to customize menus on each page.
http://alt-web.com/Articles/Persistent-Page-Indicator.shtml
DW Templates are OK for small sites -- under 50 pages. But you must re-publish every page that uses the Template.
Look at Server-Side Includes. With SSIs you open the file containing your menu HTML. Make changes. Save and upload to server. Done! A huge timesaver.
Server-Side Includes
http://www.smartwebby.com/web_site_design/server_side_includes.asp
More on Server-Side Includes
http://forums.adobe.com/message/2112460#2112460
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

HT4759 i'm trying to access my new icloud email acct from my mac. I have OS X 10.6.8 and have just completed a software update. But still not seeing how to install my icloud email...?

i'm trying to access my new icloud email acct from my mac. I have OS 10.6.8 and have just completed a software update. But still not seeing how to install my icloud acct...?

You must upgrade your OSX to Lion (10.7) minimum, Mavericks (10.9) preferably.

Urgent....Transported Update rules active version but still not active....

Similar Messages

Maybe you are looking for