Urgent: Trouble reinstalling OPA on IIS 7.5 (windows server 2008 R2).

All please see the Snapshots I have attached:
Beehive doesn't seem to be launching the .JPG files if you want to see the error I can email it.
ERROR 1:
Could not load file or assembly 'childkatDotNet' or one of its dependencies. An attempt was made to load a program with an incorrect format
ERROR 2:
Configuration Error Server Erro in '/web-determinations' Application
Follow the Link:
https://stbeehive.oracle.com/workspaces/library/OPA+-OraclePolicy+Automation/Documents?parentCid=334B:3BF0:afrh:38893C00F42F38A1E0404498C8A6612B00017C659B0B&cid_strs=334B:3BF0:adoc:38893C00F42F38A1E0404498C8A6612B00017C742725-334B:3BF0:adoc:38893C00F42F38A1E0404498C8A6612B00017C633D3D
Warm Regards,
Marc
702 324 7253
Edited by: DrManhattan on Mar 17, 2010 6:59 PM

Answered offline. The .NET runtime needs to be run in 32-bit mode to work correctly on a 64-bit operating system.
Edited by: davinfifield on 30/03/2010 18:13

Similar Messages

FTP logon issues on IIS 7 using Windows Server 2008 R2

Hi, I'm currently experiencing issues when trying to log on to an FTP server I created using Windows Server 2008 R2.
The FTP web site has Enabled both Anonymous and Basic Authentication.
On the Authotization Rules it has enabled Allow All Users and Anonymous Users with read permissions, and the local administrator with read and write.
Whenever I try to log on, either via IE or Command prompt, when asked for credentials, I get logon failures, either with anonymous or a username that has access permissions to the FTP root folder.
I tried changing the FTP application pool identity to Network Service, but still get the same error. I also have tried testing the connection from the basic settings section of the FTP Site, and when I test it using Application User (use pass-through authentication)
I get an error that says: ¨IIS Manager cannot verify whether the builtin account has access¨If I instead use a username and password, the test passes ok, however using this account to try to enter the FTP site I get logon failure, even when the account
I´m using is a local admin account.
The Server is part of an AD Domain.
I have read a few blogs and forums about problems with FTP validation but nothing related exactly to my issue.
Any ideas are deeply appreciated.
thanks
Eduardo Rojas

Hi, I would tend to ask on IIS forum (iis.net), as you might get more attention and help there.
For your issue, I would tend to think that you need to set the correct security on the FTP's home folder, but again it's only an advice, as I'am not an IIS's guru.
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

Reinstall WSUS 3.0 SP2 on Windows Server 2008 R2

Hi all,
I want to reinstall WSUS Server 3.0 SP2 but
I'm not able to do it due several issues. If I try to install WSUS with the WSUS30-KB972455-x64 .exe file, appears the following issue:
ParseCommandLine: Failed to read InstallType registry value (Error 0x80070002: The system cannot find the file specified.). DoInstall: ParseCommandLine failed (Error 0x80041453)
If I try to install WSUS with Server Manager, the issue is different:
The update could not be found. There may be a network connection issue
Also, if I try to install the Windows Internal Database feature, the issue is is different:
Attempt to install WID dailed with error code 0x80070666. Another version of this product is already installed.
I tried some fixes I've found, for example modifying registry keys, renaming folders, cmd commands, gpedit, services, etc. I have the prerequisites installed, and the server with the updates in date.
My ServerManager.log :
4160: 2014-03-11 15:44:02.547 [WindowsUpdateDownloader]   Search query: 'CategoryIDs contains '4e487029-f550-4c22-8b31-9173f3f95786''
4160: 2014-03-11 15:44:02.563 [WindowsUpdateDownloader]   Searching....
4160: 2014-03-11 15:44:06.785 [WindowsUpdateDownloader]   Initial search failed, try again on WU server.
4160: 2014-03-11 15:44:08.120 [WindowsUpdateDownloader]   Search returned: Succeeded, found 0 updates.
4160: 2014-03-11 15:44:08.135 [InstallationProgressPage] Search completed, result: Succeeded.
4160: 2014-03-11 15:44:08.135 [InstallationProgressPage] Downloading...
4160: 2014-03-11 15:44:08.151 [WindowsUpdateDownloader]   Sending failure DownloadComplete event.
4160: 2014-03-11 15:44:08.151 [InstallationProgressPage] Download completed, result: NotStarted.
4160: 2014-03-11 15:44:08.151 [InstallationProgressPage] Error (Id=0) Failure message: 'The update could not be found. There may be a network connection issue. <a href="WSUS.chm::/html/54a9eb1f-5dd1-42d8-ad00-dae55d7b9463.htm">Click here for
more information.</a>'
4160: 2014-03-11 15:44:08.151 [InstallationProgressPage] Invoking LoadFinishPage.
4160: 2014-03-11 15:44:08.151 [InstallationProgressPage] About to load finish page...
4160: 2014-03-11 15:44:08.151 [InstallationFinishPage]    Loading finish page
4160: 2014-03-11 15:44:08.228 [InstallationFinishPage]    Finish page loaded
4160: 2014-03-11 15:47:32.304 [CBS]                       IsCacheStillGood: True.
4160: 2014-03-11 15:47:32.460 [Provider]                  [STAT] DISCOVERY: ComponentInstaller.Initialize() took '164.6411' msec(s) total.
4160: 2014-03-11 15:49:39.402 [CBS]                       IsCacheStillGood: True.
4160: 2014-03-11 15:51:41.206 [CBS]                       IsCacheStillGood: True.
4160: 2014-03-11 15:53:43.435 [CBS]                       IsCacheStillGood: True.
4160: 2014-03-11 15:53:43.544 [Provider]                  [STAT] DISCOVERY: ComponentInstaller.Initialize() took '113.2189' msec(s) total.
4160: 2014-03-11 15:55:45.910 [CBS]                       IsCacheStillGood: True.
4160: 2014-03-11 15:57:47.936 [CBS]                       IsCacheStillGood: True.
4160: 2014-03-11 15:59:49.989 [CBS]                       IsCacheStillGood: True.
4160: 2014-03-11 16:01:52.089 [CBS]                       IsCacheStillGood: True.
4160: 2014-03-11 16:02:30.309 [Provider]                  System changed since last refresh: False
4160: 2014-03-11 16:02:37.841 [InstallationProgressPage] Loading progress page...
4160: 2014-03-11 16:02:37.919 [InstallationProgressPage] Creating WindowsUpdateDownloader.
4160: 2014-03-11 16:02:37.919 [InstallationProgressPage] Searching for Updates...
4160: 2014-03-11 16:02:37.934 [InstallationProgressPage] Starting asynchronous download.
4160: 2014-03-11 16:02:37.981 [WindowsUpdateDownloader]   Creating session.
4160: 2014-03-11 16:02:37.981 [WindowsUpdateDownloader]   Search query: 'CategoryIDs contains '4e487029-f550-4c22-8b31-9173f3f95786''
4160: 2014-03-11 16:02:37.981 [WindowsUpdateDownloader]   Searching....
4160: 2014-03-11 16:02:44.193 [WindowsUpdateDownloader]   Initial search failed, try again on WU server.
4160: 2014-03-11 16:02:45.529 [WindowsUpdateDownloader]   Search returned: Succeeded, found 0 updates.
4160: 2014-03-11 16:02:45.529 [InstallationProgressPage] Search completed, result: Succeeded.
4160: 2014-03-11 16:02:45.529 [InstallationProgressPage] Downloading...
4160: 2014-03-11 16:02:45.544 [WindowsUpdateDownloader]   Sending failure DownloadComplete event.
4160: 2014-03-11 16:02:45.544 [InstallationProgressPage] Download completed, result: NotStarted.
4160: 2014-03-11 16:02:45.544 [InstallationProgressPage] Error (Id=0) Failure message: 'The update could not be found. There may be a network connection issue. <a href="WSUS.chm::/html/54a9eb1f-5dd1-42d8-ad00-dae55d7b9463.htm">Click here for
more information.</a>'
4160: 2014-03-11 16:02:45.544 [InstallationProgressPage] Invoking LoadFinishPage.
4160: 2014-03-11 16:02:45.544 [InstallationProgressPage] About to load finish page...
4160: 2014-03-11 16:02:45.560 [InstallationFinishPage]    Loading finish page
4160: 2014-03-11 16:02:45.637 [InstallationFinishPage]    Finish page loaded
4160: 2014-03-11 16:03:33.195 [Provider]                  System changed since last refresh: False
4160: 2014-03-11 16:03:41.001 [InstallationProgressPage] Loading progress page...
4160: 2014-03-11 16:03:41.078 [InstallationProgressPage] Begining Sync operation...
4160: 2014-03-11 16:03:41.265 [Sync]
Sync Graph of changed nodes
==========
name     : Windows Internal Database
state    : Changed
rank     : 1
sync tech: MSI
ant.     : empty
pred.    : empty
provider : Provider
4160: 2014-03-11 16:03:41.265 [Sync]                      Calling sync provider of Windows Internal Database ...
4160: 2014-03-11 16:03:41.265 [Provider]                  Sync:: guest: 'Windows Internal Database', guest deleted?: False
4160: 2014-03-11 16:03:41.281 [Provider]                  Begin installation of 'Windows Internal Database'...
4160: 2014-03-11 16:03:41.281 [Provider]                  Install: Guest: 'Windows Internal Database', MSI-Id: 'WSSEE'
4160: 2014-03-11 16:03:41.327 [InstallationProgressPage] Installing...
4160: 2014-03-11 16:03:41.343 [OCSetup]                   Installing 'WSSEE' ...
4160: 2014-03-11 16:03:41.358 [OCSetup]                   About to run: 'ocsetup.exe "WSSEE" /quiet /norestart /x:" /lv* ...\AppData\Local\Temp\msi.log"'
4160: 2014-03-11 16:03:50.688 [OCSetup]                   ...done. Status: 1638, Message: 'Another version of this product is already installed. Installation of this version
cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel'
4160: 2014-03-11 16:03:50.704 [InstallationProgressPage] Verifying installation...
4160: 2014-03-11 16:03:50.751 [Provider]                  Skipped configuration of 'Windows Internal Database' because install operation failed.
4160: 2014-03-11 16:03:50.751 [Provider]
[STAT] For 'Windows Internal Database':
[STAT] Installation took '9.5095373' second(s) total.
[STAT] Configuration took '0' second(s) total.
[STAT] Total time: '9.5095373' second(s).
4160: 2014-03-11 16:03:50.766 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: False, Id: 51
4160: 2014-03-11 16:03:50.766 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147023258, Message: Attempt to install Windows Internal Database failed with error code 0x80070666., AdditionalMessage: Another version
of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel
4160: 2014-03-11 16:03:50.797 [InstallationProgressPage] Sync operation completed
4160: 2014-03-11 16:03:50.797 [InstallationProgressPage] Performing post install/uninstall discovery...
4160: 2014-03-11 16:03:50.813 [Provider]                  C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
4160: 2014-03-11 16:03:50.859 [CBS]                       IsCacheStillGood: False.
And my WSUSSetup.log:
2014-03-11 15:47:46 Error     MWUSSetup          ParseCommandLine: Failed to read InstallType registry value (Error 0x80070002: The system cannot find the file specified.)
2014-03-11 15:48:46 Error     MWUSSetup          DoInstall: ParseCommandLine failed (Error 0x80041453)
now I am a little lost, where I could start?

4160: 2014-03-11 16:03:50.688 [OCSetup]                   ...done. Status: 1638, Message: 'Another version of this product is already installed. Installation
of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel'
First step is to get the original installation of WSUS fully uninstalled.
How to Uninstall WSUS
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Installation of Client Access role fails on Windows Server 2008 R2 (Execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP")

Hello
I am trying to install Exchange Server 2010 beta 1 onto a Windows Server 2008 R2 (build 7000) machine which has also been set up as a domain controller.
However when attempting to install the Client Access role, setup fails with the error below.
Does anyone know of a way to get around this please?
I have already searched for this error and not found any similar threads.
Also every time I press the code button on this forum it crashes the browser and I keep losing the message! (IE8 from within Server R2). Also the message box is very small, will not expand and keeps jumping to the top.
Thanks
Robin
[code]
Summary: 4 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:01
Preparing Setup
Completed
Elapsed Time: 00:00:00
Client Access Role
Failed
Error:
The execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP" -DomainController $RoleDomainController", generated the following error: "Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.".
Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.
Access is denied.
Elapsed Time: 00:00:01
Mailbox Role
Cancelled
Finalizing Setup
Cancelled
[/code]
Robin Wilson

Hello
Thanks for all the replies.
I have since wiped the system and installed everything again and it all worked this time so not sure what was wrong last time. I did try to uninstall all Exchange components and then uninstall IIS and Application server, reboot and re-install but I received the same error still when it came to installing the client access role.
Walter: I just attempted the standard installation which should have used the default self-signed certificate. Everything was a fresh install done at the same time on a freshly formatted PC.
For info last time when it failed to work:
- Installed Windows Server 2008 R2
- Installed Domain Controller role using dcpromo. I set the forest and domain as Windows Server 2008 R2
- Added a forest trust between main domain and test Exchange domain (set up as ex2010.local)
- Installed IIS and Application Server role
- Installed Hyper-v role
- Installed Desktop Experience feature
- Installed Exchange and recieved the error
When it worked I set up the forest and domain in Windows Server 2008 mode (i.e. not R2), installed Exchange first and then set up the forest trust and then Hyper-v. It did say it failed to configure dns which was probably because it started trying to do automatic updates half way through the dcpromo! DNS seems to work ok though.
I did notice this time that Hyper-v gave a warning about the virtual network adapter not being set up correctly and the local network did not work correctly although I could access the internet. Not sure if this could have been related to the cause of the problem previously. For now I have disabled the virtual network until I get time to try and get it working and so the mail will work in the meantime.
I also noticed that Hyper-v added an extra 443 ssl binding to the default website so as it had 2 bindings on port 443 it refused to start. After deleting one it worked.
I decided to install Exchange onto a domain controller as it is only a test and I wouldn't do it in a live environment. I am also short of test machines! It didn't give me any warnings about this actually, I think previous versions warn you that it is not recommended.
Andreas and Chinthaka: I did not know about the requirement to run the domain at 2003 mode. The main domain is running in 2008 mode with Exchange 2007 so I assume this is just a temporary beta related requirement. It does seem to be working (second attempt) so far in a 2008 mode domain although I haven't had a chance to fully test it yet.
Thanks
Robin
P.S. Sorry it's taken me a while to reply!
Robin Wilson

Unable to reinstall WSUS on air-gapped Windows Server 2008 R2 SP1 server

A co-worker installed WSUS on an air-gapped (not connected to the Internet) server running Windows Server 2008 R2 SP1, but he wasn't sure he'd configured everything properly, and asked me to uninstall and reinstall it. The uninstallation went without
a hitch, but reinstalling through the Server Manager gives the error message "The update could not be found. There may be a network connection issue." The Server Manager log shows the following:
8632: 2014-04-25 15:30:22.578 [Provider]                  System changed since last refresh: False
8632: 2014-04-25 15:30:29.489 [InstallationProgressPage] Loading progress page...
8632: 2014-04-25 15:30:29.520 [InstallationProgressPage] Creating WindowsUpdateDownloader.
8632: 2014-04-25 15:30:29.535 [InstallationProgressPage] Searching for Updates...
8632: 2014-04-25 15:30:29.535 [InstallationProgressPage] Starting asynchronous download.
8632: 2014-04-25 15:30:29.535 [WindowsUpdateDownloader]   Creating session.
8632: 2014-04-25 15:30:29.535 [WindowsUpdateDownloader]   Search query: 'CategoryIDs contains '4e487029-f550-4c22-8b31-9173f3f95786''
8632: 2014-04-25 15:30:29.582 [WindowsUpdateDownloader]   Searching....
8632: 2014-04-25 15:33:07.906 [WindowsUpdateDownloader]   Search failed, HRESULT: -2145107924, message: Exception from HRESULT: 0x8024402C
8632: 2014-04-25 15:33:07.921 [InstallationProgressPage] Search completed, result: Failed.
8632: 2014-04-25 15:33:07.921 [WindowsUpdateDownloader]   Sending failure DownloadComplete event.
8632: 2014-04-25 15:33:07.921 [InstallationProgressPage] Download completed, result: NotStarted.
8632: 2014-04-25 15:33:07.921 [InstallationProgressPage] Error (Id=0) Failure message: 'The update could not be found. There may be a network connection issue. <a href="WSUS.chm::/html/54a9eb1f-5dd1-42d8-ad00-dae55d7b9463.htm">Click here for
more information.</a>'
8632: 2014-04-25 15:33:07.921 [InstallationProgressPage] Invoking LoadFinishPage.
8632: 2014-04-25 15:33:07.921 [InstallationProgressPage] About to load finish page...
8632: 2014-04-25 15:33:07.937 [InstallationFinishPage]    Loading finish page
8632: 2014-04-25 15:33:07.953 [InstallationFinishPage]    Finish page loaded
Any ideas?

Hi,
0x8024402C WU_E_PT_WINHTTP_NAME_NOT_RESOLVED
Winhttp SendRequest/ReceiveResponse failed with 0x2ee7 error. Either the proxy server or target server name cannot be resolved. Corresponding to ERROR_WINHTTP_NAME_NOT_RESOLVED.
Stop/Restart service or reboot the machine if you see this error frequently.
Since the server is not connect to the internet, at least it should have an available upstream server. Did you configure it correctly? The error message indicate that the
name could not resolved, make sure you can resolve the name of the upstream server. Run nslookup check the result.
If it is the only WSUS, then give it internet connection and test.
Hope this helps.

Indexing .cfm files using Indexing Service on windows server 2008 and IIS 7.0

Hi All,
Anyone knows why .cfm files would not get indexed by Indexing Service on windows server 2008 and IIS 7.0. This is a coldfusion website using Indexing Service for site search. There are a lot of cfm pages indexed as unknown files. Any clues on how this can be fixed?
Thanks!

You might try editing your registry so that *.cfm, *.cfc, and other ColdFusion related files are treated as text files by the Windows search feature. See link below.
http://www.dougknox.com/xp/tips/xp_bad_search.htm
Disclaimer: I am not a Windows system admin. You might try posting this question to a Windows specific forum.

CRVS2010 not display on Windows Server 2008 64bit - IIS 7

Hello every body !!
I'm use VS 2010 and Crystal Reports for Visual Studio 2010 Beta 2 to build a website.
When I build directly on the VS2010, report viewers shows very well.
But when I build up host Windows Server 2008 - IIS 7, then just get a blank aspx page and there are no error messages
Please help me ! ! !
Thank you ...
http://a.imageshack.us/img808/6750/reportinvs2010.jpg
Edited by: pumbanet on Sep 6, 2010 9:03 AM
Edited by: pumbanet on Sep 6, 2010 9:11 AM

What CR runtime did you deploy?
Are you working under default or custom web site?
BTW., the image link shows a pretty good report. Can you post an image of the blank aspx page?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Windows Server 2008 R2 Crystal Report XI Runtime hosted on IIS 7 32 bit

Hi all,
We have discovered that our software department installed Windows Server 2008 R2 in a production environment.
The production environment hosts asp .net applications on IIS 7 that enables 32 bit applicatons to run over it.
We still develope on Windows XP and Visual Studio 2005 using Crystal Report XI runtime.
Reports are compatible and run properly in production environment having enabled application pool of IIS 7 in 32 bit mode.
Is Crystal report XI runtime supported on windows server 2008 R2 hosted on IIS7 32 bit mode?
Regards.
Roberto.

Hello,
Where to start.... first thing to do is search, lots of posts on these exact questions...
First, CR XI R2 does not support 4.0 framework, although MS does say it's fully backward compatible but it is not supported on Windows 2008 R2 unless you upgrade to CR XI R2A
https://smpdl.sap-ag.de/~sapidp/012002523100009114712011E/crxir2sp4_fullbuild.exe
https://smpdl.sap-ag.de/~sapidp/012002523100009114412011E/crxir2sp6_incremental.exe
Or for a clean PC https://smpdl.sap-ag.de/~sapidp/012002523100009114712011E/crxir2sp4_fullbuild.exe
Redist is on our download page.
Second is CR XI R2 is not supported in VS 2010. Only one supported is CR for VS 2010 which you can download from here:
http://www.sdn.sap.com/irj/boc/crystalreports-dotnet
Bottom of the page has all of the download links for the 32 and 64 bit runtime for your WEB server.
App Pool must run in 32 mode, just in case you are using 64 bit OS.
Lastly, if you are using the SAP Integration Kit to connect to your BEX query then bad news, CR for VS 2010 doesn't have API's available to set the log on on info.
You may be able to use B1, it uses CR 2008 OEM Build and they may support this. Search that forum to see if they do:
/community [original link is broken]
Don

ColdFusion MX7 on Windows Server 2008 R2 / IIS 7.5

After configuration, have developed the ColdFusion MX7 installation to Windows Server 2008 R2 64 bits and System for the installation of Office 2000, but in running the following code segment, abnormal.
code:
<cftry>
    <cfobject type="COM" name="PPT"
class="PowerPoint.Application" action="CREATE">
   <cfset variables.stLocalTemp=StructNew()>
   <cfset Pres = PPT.Presentations.Open
("abcd.ppt", true, False, False)>
   <cfset resultjx=Pres.Close()>
   <cfset resultjx=PPT.Quit()>
   <cfset Pres = "">
   <cfset PPT = "">
<cfcatch>
    <cfoutput>Error in PPT2JPG CFC:
#cfcatch.message# #cfcatch.detail#</cfoutput>
   </cfcatch>
</cftry>
Exception:
An exception occurred when executing a Com method. The cause of this
exception was that: AutomationException: 0x80004005 - PowerPoint ??¨′
ò?a′???t?￡ in 'Microsoft PowerPoint 2000'.
Who knows the cause of abnormal, do me a favor.

Hi Peter,
Please check if the IPv4 Address and Domain Restrictions feature can help you to achieve target. For more details,
please refer to following article.
FTP IPv4 Address and Domain Restrictions
Page
In addition, I agree with SenneVL. This issue seems to be more related to IIS configuration. As SenneVL suggested,
you would post your question in IIS Forum. I believe we will get a better assistance there.
Hope this helps.
Best regards,
Justin Gu

Cold fusion 9 Installation on Windows server 2008 (IIS 7.0) - IIS websites not working ?

I am having a 64 bit machine on which windows server 2008 R2 is installed. IIS 7.0 is configured and running on it. on which I have my organisations main website. I have to install Cold fusion on this machine as some of my site pages are designed with CF.
I used all the default settings for installing cold fusion 9. It got completed succefully. But after I restarted my system and tried accesing my ASP.net website it was not loading the page. Text getting displayed was only as follows '<script> src="'. Later I unsistalled CF and my site was working fine.
Please can any one guide me to successfully install Cold fusion without disturbing my main site deployed on IIS ?

Sarfarajms, I don't recognize what about the CF install would conflict with ASP.NET, but I'll note this:
If you downloaded CF 9 recently, you are still running 9.0--which does NOT formally support IIS 7. If you followed the steps about enabling IIS 6 compatibility and such (in the install guide or some blog entry), perhaps that caused the conflict.
Instead, you will want to install 9.0.1 (CF 9 Updater 1, which is NOT provided in the current 9.0 install). THAT is the first release to formally support IIS 7. And if you read the updater installation guide (http://www.adobe.com/support/documentation/en/coldfusion/901/cf901install.pdf), it discusses how to deal with the upgrade depending on what you had done with respect to IIS, starting at the bottom of its page 8.
Hope that helps.
/charlie

URGENT! CF8 on Windows Server 2008 WEB

Hi,
Can anyone here please tell me if Coldfusion 8 will run on "Windows Server 2008 Web"?
It does not list it in ther system requirements? Better still has anyone here actually installed it on this version opersating system?
Thanks,
Aaron

Thanks for the prompt reply mate!
I have already had a look for some online help but have been unsuccessful thus far. There does not seem to be much with regard to the "WEB" edition. Do you know of any please?
I have already installed CF8 on our PC running Win Server 2008 Web. At the end of the install the only error I got was that it couldn't access the CF Admin setup page because the MIME types were not recognised. I then added those through IIS but when I went to the CF Admin page it is all in goobily ****....if you know what I mean?

TREX for ISA 7.0 installed on Windows Server 2008 R2 with IIS 7.0 issues

We have just finished upgrading our ERP dev system to EHP4. We have also upgraded our Portal with SAP E-Commerce to Netweaver 7.0 EHP1 and ISA 7.0. Both systems were on Windows Server 2003 and have been moved to Server 2008R2 through a System copy. TREX was installed on the same host as our Portal/ISA system.
After the move I reinstalled TREX 7.1 v44 on the same host as our Portal and ISA 7.0 system which is Server 2008R2 with IIS 7.0.
Everything on the TREX side is in status Green. I have tested the rfc and http connections. On the ERP side, I have deleted the catalogs from SRMO and re-ran "ISA_CATALOG_REPLICATION" many times.
B2B still will not connect and I have traced down an error on the TREX side that I am assuming is the cause:
- When I kick off a catalog replication job from our R3 system I get these errors in the TrexIndexServerAlert_<host>.trc file:
6752 2011-05-23 14:45:22.643 e trex_config IndexConfigMgr.cpp(00202) : IndexConfigMgr::save(e085739334d1aff1afc500155d1e1400<SAPSIDClient>$delta_1$en)failed
6752 2011-05-23 14:45:22.645 e indexmgr     IndexMgr.cpp(01602) : illegal transition in acquire (itsCurrentState finish_delta_merge currentState finish_delta_merge to delete)
6752 2011-05-23 14:45:22.645 e indexmgr     IndexMgr.cpp(01602) : index "e085739334d1aff1afc500155d1e1400<SAPSIDClient>"; finish_delta_merge 1/0/0; handles: thread 6752 (261865136) state finish_delta_merge acquired 2011-05-23 14:45:22.560
6752 2011-05-23 14:45:22.645 e indexmgr     IndexMgr.cpp(01836) : removeLocked failed currentState finish_delta_merge minState free maywait true
6752 2011-05-23 14:45:22.646 e indexmgr     IndexMgr.cpp(01836) : index "e085739334d1aff1afc500155d1e1400<SAPSIDClient>"; finish_delta_merge 1/0/0; handles: thread 6752 (261865136) state finish_delta_merge acquired 2011-05-23 14:45:22.560
6816 2011-05-23 14:45:30.692 e trex_config IndexConfigMgr.cpp(00202) : IndexConfigMgr::save(e0857395c48ffdf1afc500155d1e1400<SAPSIDClient>$delta_1$en)failed
6816 2011-05-23 14:45:30.694 e indexmgr     IndexMgr.cpp(01602) : illegal transition in acquire (itsCurrentState finish_delta_merge currentState finish_delta_merge to delete)
6816 2011-05-23 14:45:30.694 e indexmgr     IndexMgr.cpp(01602) : index "e0857395c48ffdf1afc500155d1e1400<SAPSIDClient>"; finish_delta_merge 1/0/0; handles: thread 6816 (310820528) state finish_delta_merge acquired 2011-05-23 14:45:30.646
6816 2011-05-23 14:45:30.695 e indexmgr     IndexMgr.cpp(01836) : removeLocked failed currentState finish_delta_merge minState free maywait true
6816 2011-05-23 14:45:30.695 e indexmgr     IndexMgr.cpp(01836) : index "e0857395c48ffdf1afc500155d1e1400<SAPSIDClient>"; finish_delta_merge 1/0/0; handles: thread 6816 (310820528) state finish_delta_merge acquired 2011-05-23 14:45:30.646
Any ideas?
Thank you,
Neil

Hi Neil,
We have exactly the same problem. We installed a new SAP E-Commerce system on Microsoft Windws 2008 R2 with TREX Version 7.10.43.00. The TREX connection is okay. Also the catalogue replication works without any problems. The SAP support means it is a permission problem on the IIS. The problem isnu2019t solved yet and the message to the SAP support is in process.
What is your effect with this link?
http://localhost:<TREXNAMESERVER>/TREXHttpServer/
Default:
http://localhost:<30305>/TREXHttpServer/
Kind regards,
Roland

PDF not opening in chrome IIS 8.5, windows server 2012 R2

Hi,
I am facing problem in opening pdf using chrome. problem is not will all pdf files but some of them.
Chrome default pdf viewer plugin is enable, but not loading/downloading pdf. if i disable default pdf viewer and enable adobe pdf viewer, pdf opens up.
i googled the problem found same problem in IIS 7.5 http://support.microsoft.com/default.aspx?scid=kb;EN-US;979543.
what could be the possible solution?
Thanks
Any help will be much appreciated.

This does not seem to be a Windows Server core issue, as you would not be running Chrome on Server core. Chrome requires a GUI. This is a Server Core forum.
You might be better served taking this query to a forum dedicated to Chrome.
.:|:.:|:. tim

WCF service application hosted in IIS for reading Windows server service bus topic/subscription

We have a WCF service application(not web application) which is deployed in IIS 8 pointing to the windows server service bus topic/subscription. We have configured the WCF service with applicationInitialization feature of IIS 8 to warm up.
But the WCF service is not reading any message from the topic/subscription.
configured in web.config file as below
<system.webServer>
<applicationInitialization>
<add initializationPage="/MyService.svc" />
</applicationInitialization>
</system.webServer>
When we run the same from visual studio its reading messages from topic/subscription.
any configuration/settings which we are missing?

You probably didn't initialize correctly the auto-start. Btw. I would recommend you to use AppFabric for this feature. It is more transparent in development and production.
Please take a look on following posts:
http://social.technet.microsoft.com/wiki/contents/articles/1284.host-wcf-services-with-service-bus-endpoints-in-iis-and-windows-server-appfabric.aspx
http://developers.de/blogs/damir_dobric/archive/2009/10/11/iis-7-5-and-always-running-web-applications.aspx
http://developers.de/blogs/damir_dobric/archive/2010/06/11/appfabric-issue-with-aoutostart.aspx
Damir Dobric
developers.de
daenet.de
daenet.eu
daenet.com

Trouble reinstalling Boot Camp 2.1 on Windows XP SP3

I started having problems getting BootCamp Manager to start, so this morning I decided to uninstall and attempted to reinstall without much luck.
First, I inserted my Leopard disk which has BootCamp Manager 2.0 on it, and I always get an error 2753 stating that the "installation has encountered an unexpected error".
So I pulled out my old BootCamp Manager v1.4 disk, and I get the same exact error.
Then, I went to the Apple website to download the latest version (2.1) but it throws an error at me stating that it's an upgrade and can't be installed without a prior version of BootCamp installed (which is frustrating because, as far as I understand, 2.1 is the only version that can be installed on top of SP3).
I've uninstalled AVG antivirus thinking that was the culprit but no dice.
What should my next move be? I REALLY don't want to have to reinstall Windows today. Is there a full 2.1 installation package out there that doesn't require a previous installation of BootCamp to run?
Thanks for your input!

Which model year do you have?
Leopard DVD version?
Boot Camp 2.1 is over a year old. It isn't required. And with Mac Pro, there is a lot you can do w/o Apple drivers. The ones you would be missing are:
OS Switcher - Boot Camp control panel startup disk
Apple Time Services - sync time between OS X and Windows
Once you have XP installed, backup though that can be slow.
Use NTFS instead of FAT32.
Ditch XP and while Windows 7 RC is still available for download, grab the 64-bit version.
Some people are fine installing Boot Camp 2.0.x and it is only when they attempt to install or after installing 2.1 that trouble ensues.
Definitely uninstall all the Apple programs in Programs control panel; disable any services and startup items still showing from Apple - type msconfig to get there. I don't need or want MobileMe and other things that get thrown in along the way, so I always uninstall and disable those.
BC 2.1 was suppose to do something for upgrading from SP2 to SP3, but I've yet to see or hear any evidence that it did anything.
Something is wrong though and you may need to start over. In the meantime, try uninstalling, try running chkdsk, and then run system file checker from cmd.exe
sfc /scannow
Assume you Google'd on '2753' and didn't get anywhere.

Urgent: Trouble reinstalling OPA on IIS 7.5 (windows server 2008 R2).

Similar Messages

Maybe you are looking for