URGENT !!! Two physical network interface with two completely different subnets - No bridges - cannot connect both

This is my urgent problem:
I have a physical machine with two physical network interfaces. I have a VMWARE player installed and a virtual machine that must use both cards on two different subnets, one directly public on the router and one intranet inside the company.
How can I just tell one net card to go on that sub and the other on the public sub ? Going crazy. Please help.
Thanks,
P.

Using VMware Player Virtual Network Editor, create a additional bridged VMnet and bind each bridged VMnet to a different physical network adapter... on virtual machine, create a virtual network adapter to each subnet, and bind each virtual network adapter to a different bridged VMnet.
For additional help with virtual network editor, check this KB: VMware KB: Using the Virtual Network Editor in VMware Workstation

Similar Messages

How to create one soap interface with two soap action?

Hi,
I need to create one SOAP Interface with two or more webmethods (soap action), for example:
Interface: MI_Outb_User
Webmethods: createUser, searchUser, deleteUser.
Can anybody helpe me?

Hi Santos,
I assume you will use one action at a time and depending upon certain condition you want to invoke the webservice and the corresponding action. If this is yes, then please check michaels reply in this thread:
How can I handle serveral soap actions
or see stefans reply:
Re: Is SOAP Adapter Action field can contain 2 or more "SOAP Actions"
If this is not, then please ignore it.
Regards,
---Satish

I have two iPhones and synchronize with the same macbook. How I do segregate both applications and data?

I have two iPhones and synchronize with the same macbook. How do I segregate both applications and all the data?

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

I can't connect to I tunes with my I pad 3, it say cannot connect to I tune store, any tips on how to overcome this issue, thanks.

I can't connect to I tunes with my I pad 3, it say cannot connect to I tune store, any tips on how to overcome this issue, thanks.

Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

SCVMM 2012 R2 – two iSCSI network interfaces connected to the same subnet

I would like to configure two networks in SCVMM 2012 R2 which will be used by VMs to connect to iSCSI SAN. Both of these networks should be connected to the same subnet (192.168.100.0/24) because they will connect VMs to Dell EqualLogic using iSCSI MPIO.
Those networks should be available on all Windows Server 2012 R2 Hyper-V cluster nodes.
When I try to create two logical networks in SCVMM with the same subnet, I receive error (Unable to assign the subnet 192.168.100.0/24 because it overlaps with an existing subnet)
How should I configure networking in SCVMM to allow one virtual machine to connect to the same subnet using two network interfaces?

"How should I configure networking in SCVMM to allow one virtual machine to connect to the same subnet using two network interfaces?"
You can achieve this by simply adding multiple vNICs to a VM - connected to the same VM Network.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Very Strange Network Issue With Two Guests on 2012 R2 Hyper-V Failover Cluster

Hi all. We're having a odd issue with two guests on our 2012 R2 failover cluster.
In a nutshell, if we shutdown a particular server (I'll call it Server A) another totally different server (Server B) on the same node loses it's network connectivity to the domain. If we start server A back up, network connectivity returns on server B.
At first I thought server A might be running a service that was somehow linked to server B, so I decided to disable server A's NIC. Interestingly, that had no affect on server B's connectivity.
The next step I tried was pausing server A and again, no adverse affect on server B's connectivity.
Next step was to live migrate server A to another node. This action did
cause server B to lose its network connection.
One other clue is that if I ping server B from either of the Hyper-V hosts in the cluster, I never lose network connection to server B.
So I would suspect this is some network issue on the cluster, but I'm kind of at a loss where to go from here.
Has anyone seen this behavior before or does anyone have any troubleshooting suggestions I can try?
Thanks!
George Moore

Hi Sir,
I'v never seen this before .
>>Next step was to live migrate server A to another node. This action did
cause server B to lose its network connection.
They are connecting to same virtual switch ?
First please run cluster validation to check if there is any error .
If it is ok , please try the following items for troubleshooting :
1. shutdown serverA serverB
2. then add another virtual NIC for serverB
3. start server B check if the issue happens to both "old" and "new" virtual NIC .
In addition , you can live migrate both A and B to another node , then try to live migrate A to the original node .
If the issue persists , I would suggest you to remove that virtual switch on both nodes then re-create them .
Best Regards,
Elton Ji
If it is not the answer please unmark it to continue
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Can I use one GBIP-Interface with two programs at the same time?

Hi, I have one PCI-GBIP-controller with multiple instruments installed. Now I want to use these instruments with two differents programs at the same time.
E.g.: program 1 uses GPIB0::1 and GPIB0::3
and program 2 uses GPIB0::4 and GPIB0::7
Is this possible??
When I have tried to do this, I always got timeout errors..
Thanx in advance.
Philipp

Hi,
You shouldn't have any problems accessing different devices from different programs using the same interface. I even used the two VIs to communicate with the same device. Although not the best approach, VISA didn't return any errors.
DiegoF.

Message interface with two types of message types

Hi experts,
I am having problem that a proxy cannot be generated because of the (mixed) types of the message types that the interface is using.
The first message type is defined in the repository and another is defined as an external definition, imported in from an outside source.
Here is the SAP message I received when I tried to generate the proxy for this interface.
+++++++++++++++++++++++++++++++++++++++++++++
Interface uses external and internal message definitions
Message no. SPRX122
Diagnosis
In a message interface you can use messages from different sources:
1. Message types and fault message types edited in the Integration Repository
2. Messages imported into the Integration Repository (external definitions, RFC, IDoc)
In the current message interface, message types from different sources have been used.
Since messages from these different sources must be handled differently during proxy generation, such a mixture of messages within a message interface is not possible.
System Response
The interface cannot be generated.
Procedure
Change the interface definition accordingly in the Integration Repository.
++++++++++++++++++++++++++++++++++++++++++
The imported xsd is quite large and also contain many large includes. I don't have the option of creating the message type manually.
Any suggestions?
Thank you,
-michelle

Hi all,
I tried several things and the problem is still not resolved. This is what I learned.
First of all, I believed the SAP message about mixing of internal and external message is misleading or even wrong. I tried with both message types being external but I still get the same message that the interface has one internal and the other external message type.
Secondly, since Arvind suggested that I might have used an xml element that is not currently supported by ABAP proxy, I then change to another definition with the most simplest elements. I then attached this other definition to the interface and tried generating the proxy again. I still get the same system message that I am using mixing of message types in one interface.
My conclusion is XI still is not capable of generating ABAP proxy from external definition.
Does anyone have any comments/suggestion/experience on this issue?
Best regards,
-michelle

How should I add a new physical network interface to the system?

Hello:
I am about to test my own NIC driver.
I have used add_drv to add my driver.
I have assigned an IP address to the sytem in the /etc/hosts file and corresponding network mask in the /etc/netmasks file, too.
But when I tried to ping this IP address, it reported an error message saying"ICMP Host Unreachable from gateway localhost .....".
I wonder if the system knows this physical network address.
Does this have something to do with the /etc/hostname.* file?
If this is the case, what should I name the "*" part of this file?
Any advice will be appreciated.
Steven

Hello Shridhar:
Thanks for your kindly reply.
I just noticed that the system would try to plumb the interface during the booting process but failed with a error saying "ifconfig:plumb:XXXX:Bad file number", where XXXX is the * part of /etc/hostname.*
Does not mean I have assigned a illegal interface name to this interface?
It seems that man page doesn't contain any information about error messages.
I use the form XXX0, where XXX is the name of the NIC driver.
Any advice will be appreciated.
Steven
You should plumb the interface and bring it up with
the ifconfig command. Do a man on ifconfig for more
details. What was the add_drv command used ? Based on
your driver's name, you can setup the hostname.*
file's name to automatically setup and initialize the
NIC inetrface everytime the system boots up.
HTH
shridhar

Share calendar on two Ipads (one Imac with two users)

Hi community,
I'm looking for some help and where to look for if not here. Let me quickly describe my setup at home and what I try to achieve.
My partner and I have both their own iPad and iPhone. There is one iMac where we live. We are using it together but each of us has it's own user account on it and therefore it's own Itunes library. Both of us are using the iCal calendar on the iMac which we sync with our iPad and iPhone.
So there is one iMac with two users on it. Each user syncs his iCal with his iPad and his iPhone. What we would like to achieve though is that we can cross-share our iCal calendar. So that my partner can see my calendar items on her iPad and iPhone and vice versa.
We do not have a google mail (calendar) account nor are we using iCloud.
Every help is very much appreciated.
Legerea

Dear Dah,
I now have two iPads, which I also (need to) have separate AppleID's for. I understand I can share apps between them if I authorize iTunes on my iMac with both ID's, but I am not quite sure about the correct way to do that. I already have the iMac authorized for AppleID#1. If I go into iTunes and click on Store/Authorize this Computer... and enter my AppleID#2 information into Account name and Password boxes, does this authorize my iMac's iTunes for BOTH ID's or does it just change the authorization from ID#1 to ID#2?
If the former is correct, I understand the way to proceed is to xync up both iPads to iTunes and then I can drag and drop apps from one iPad's library listings to the other, right?
If this is not the correct way to get dual authorizations, what is?
Thanks!
pax / Ctein

Query Network interface with C#

Hello,
I'm developing a C# winforms application under Windows server 2008 (64bit)
Is there a way to query all network interfaces installed in the PC and check their IP address and if there is an ethernet connection (connected \ not connected) ?
I want to do it with Microsoft C# classes.
Best regards,
Z.V

Hi,
Solution 1:>
Step1:>
UdpClient u = new UdpClient(remoteAddress, 1);
IPAddress localAddr = ((IPEndPoint)u.Client.LocalEndPoint).Address;
Step2:>
foreach (NetworkInterface nic in NetworkInterface.GetAllNetworkInterfaces())
IPInterfaceProperties ipProps = nic.GetIPProperties();
// check if localAddr is in ipProps.UnicastAddresses
Solution 2:>
foreach(NetworkInterface ni in NetworkInterface.GetAllNetworkInterfaces())
if(ni.NetworkInterfaceType == NetworkInterfaceType.Wireless80211 || ni.NetworkInterfaceType == NetworkInterfaceType.Ethernet)
Console.WriteLine(ni.Name);
foreach (UnicastIPAddressInformation ip in ni.GetIPProperties().UnicastAddresses)
if (ip.Address.AddressFamily == System.Net.Sockets.AddressFamily.InterNetwork)
Console.WriteLine(ip.Address.ToString());
Documentation:>
NetworkInterface.GetAllNetworkInterfaces Method
Good Tutorial:>
http://www.codeproject.com/Articles/64975/Detect-Internet-Network-Availability
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

Need to combine two accounts I opened with two different email addresses

How do I combine two of my accounts that I have different email addresses for?I can open both separately but can't sych my I pod with all my music.

This an outline of what i did.
(i did the screenshots using a much smaller version of the image than you posted)
1. First you want to put both images into the same documents as layers.
     You could open both photos and then drag one into the other from the Photo Bin.
2. With the layer that just has the scoreboard selected, use the Quick Selection Tool to select just the scoreboard.
      Then right click inside the selection and press Layer via Copy, which puts just the scoreboard on a layer.
         (named sign in the screenshot)
3. Move the sign layer below the picture with you in it by dragging in the layers panel.
       Then use the Quick Selection Tool to select the over exposed scoreboard, go to
       Select>Inverse and then press the Add Layer Mask button at the bottom of the layers panel.
       The layer mask hides the overexposed scoreboard.
4. Select the layer with just the scoreboard and using the Move Tool, position the scoreboard
      so you can see it through the hole the layer mask made.
      Go to Image>Transform>Distort and move the corner handles of the bounding box to fit the new scoreboard
      in position.
Optional stuff:
Use the Clone Stamp Tool to clone around the cutout scroreboard to get rid of some of the highlights
Apply an Inner Shadow layer style to the scoreboard (sign) layer
If your going to send the photo by email or other means to someone else and resize the photo smaller, add some sharpening by selecting the top layer, pressing Shift+Ctrl+Alt+E to merge everthing into a new layer, select you,
add a layer mask and use one of the sharpening filters under Enhance>Unsharp Mask or Adjust Sharpness

HT201210 I have loaded IOS 6 but when it says I have just a few more steps to complete and asks me to sign in with my apple id, it says it cannot connect to server.   Now my ipad won't function at all and it is completely stuck even after turning it off a

I was having trouble purchasing candy crush updates (for no apparent reason, as it has been fine previously).   I thought perhpas I needed to download some new software and promptly started the IOS 6 update.   It installed and then asked me to complete the final few steps by signing in with my apple id.   When I try to do that it says "it cannot connect to the server".   I have tried turing it off and on and over riding it, but it won't let me do anything at all now on my ipad mini.
Can anyone help?   I literally can't function!!!!

You can't override it no matter what you do. The device has to connect to the server to complete the iOS update. You could try rebooting the iPad and see if that lets you connect to the server after it starts up.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that will not work, you can try connecting to iTunes on your computer and see if the activation will complete. Sometimes when thes activation issues arise, you end up having to restore the device again, but first things first. Reboot and see what happens.

HT1341 I have a new mac pro with Mountain Lion 10.8.1 but cannot connect to my Canon 6000B printer and can't find a driver download on the net - can anyone help on this?

I have a new mac powerbook pro OS X 10.8.1 and cannot connect to my canon 6000B printer - the printer appears in the printer list but will not install and I can't find a driver on the net - does anyone know what the solution is?

dino1335 wrote:
Thanks for getting back. I need help here
1 What do you mean by System Information? Is that System Preferences?
System Information is located in Applications > Utilities. It shows lots of information about your Mac, including information about the printer queues.
dino1335 wrote:
2 When I go to System Preferences and click on the printer LBP6000/LBP6018 there is no information in that window about the URI if I click Open Print Queue there is no information other than the ID of the printer
In previous versions of OS X you did see this information via the Options & Supplies pane for the selected printer in Print & Scan. But with 10.8 this information was removed so know you need to use System Information > Printers to see information about an installed printer.
dino1335 wrote:
3 If I print a document it just goes to print (it goes through the printer but no information is printed on the paper) there is no print cue so I don't know where to find the information on the URI or what I am supposed to copy
I believe that the document does not print because the print queue has not been created correctly. The CAPT driver requires a specific queue name and if the queue name is wrong then you will not be able to print.
dino1335 wrote:
FYI I also have a MacBook Pro (old) with Leopard which I also print to the same printer on and there isn't a problem with that just with this new MacPro which has Lion installed
Not surprised to read that. Mtn Lion has caused some issues for owners of CAPT printers, especially if they upgraded to 10.8 from 10.7 or 10.6.
Since you mention the ability to print on 10.5, I just want to check that you are physically moving the USB cable connected to the LBP from the 10.5 Mac to the 10.8 Mac, rather than sharing the printer from one Mac to the other. Because if you are sharing the printer from the 10.5 to the 10.8 Mac then this can be a cause of your current issue. The CAPT driver does not work when it is being shared to other Mac's.

HT203163 I cannot update various games/apps. When I attempt with my correct password, I get message "cannot connect to Itune store".what to do?

I cannot update various games/apps on my ipad. When I attempt to update using my correct Apple ID and password, I get message "cannot connect to Itune store".
How to fix?

Hello, Olliegirl1.
Thank you for visiting Apple Support Communities.
When experiencing issues connecting to the iTunes store on an iOS device, here are the troubleshooting steps that I would recommend going through.
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H.

URGENT !!! Two physical network interface with two completely different subnets - No bridges - cannot connect both

Similar Messages

Maybe you are looking for