Urgent: Unable to capture from TV Capture Card

Hello,
I'm Ashish Shukla. I'm writing an application in JMF 2.1.1b using J2SE 1.4.0 on Win32 platform on Intel Celeron 1 GHz processor which captures from the capture device. It works fine on Intel Create & Share CS110 Web Camera. But now, I'm try to capture from the TV Capture Card Pinnacle Studio PCTV TV Capture Card (Composite Video).
But JMF Registry is not able to detect the TV Capture Card (connected alone) & my PC hangs. But, when WebCamera is plugged in, JMF Registry detects it.
When Both WebCamera (USB port) & TV Capture Card are plugged in, then JMF Registry detects only Web Camera.
If anyone can help me resolve the problem. I'm very thankful.
Yours sincerley,
Ashish Shukla
Wah Java!!

Dear friend
I have a similar problem, did you got the answer...
I m trying to get video from the video capture card first from video then for composite then for ..... each port ... but it looks not to be easy ...
c u
Thanks
[email protected]

Similar Messages

Unable to capture HD 1080 video from HDCAM deck using Decklink HD

I have an original decklink HD capture card with SDI I/O. I have a rented Sony HDCAM F500 deck for the weekend. I can not get FCP to digitize even a frame. All my QT, FCP, OSX and Decklink software is up to date and compatible with one another acording to Decklink's website.
The capture tool shows no video input. I am conecting via SDI from the HD output of the deck to the SDI input on the card, the capture settings are set to the HD format I need to work in, 23.98 PsF. I get the error mesage when I select the setting I want: Unable to locate the capture device Blackmagic HDTV 1080. Your system config may have changed or your deck/camera may be disconnected or turned off.
The system will work in SD using the downconvert output of the deck, but this does me no good on this job. I hope someone has experience with this problem and can help because I am out of ideas!

sorry mate, if I was in the office I would try to help troubleshoot this thing, but here at home its a bit pointless.
other than suggesting you check that you really do have an Declink HD card an not the Declink SD card, or th epossiblity the card may be faulty, the best I can offer is to point you to the Decklink forum at the Cow.
http://forums.creativecow.net/cgi-bin/newviewposts.cgi?forumid=124
have you tried to capture any other HD flavour with this card? how about capturing via the downcoverted SD and using the card to upconvert to HD? (this is not a suggested workflow, just trying to ascertain whether the card is working in HD at all)

Getting Input from Video Capture Card into Flash

Hi All,
I have started the Flash Communication R & D from my
Company. I am working as a flash developer and progarmmer for last
2 years
I want to Flash Live Video Streaming . I can do it with the
web camera attached to my Computer or server.
But i want to Stream a Live Video on the Net. The Input which
i will have is a Video Capturing card on my machine
My Application recognises the Camera or the Video Capture
Card Attached to my computer But it is not getting any videos or
the images from the Video Capturing Card
Any one have done Live Video Streaming with the help of Video
Capturing Card
Any One have knowledge Please Help ....
It is very Urgent
Abu ;)

Hi All,
I have started the Flash Communication R & D from my
Company. I am working as a flash developer and progarmmer for last
2 years
I want to Flash Live Video Streaming . I can do it with the
web camera attached to my Computer or server.
But i want to Stream a Live Video on the Net. The Input which
i will have is a Video Capturing card on my machine
My Application recognises the Camera or the Video Capture
Card Attached to my computer But it is not getting any videos or
the images from the Video Capturing Card
Any one have done Live Video Streaming with the help of Video
Capturing Card
Any One have knowledge Please Help ....
It is very Urgent
Abu ;)

Unable to capture from my Canon hv30

I just tried to capture some footage from my hv30, the first time I've tried, and it say's on the capture screen that the capture device is off line. I have the camera properly connected and its in the right setting, is there some setting in premiere that's i have wrong? I have another program that came with the camera, and it can't connect to the camera either, saying that its not connected. Not sure what to do at this point, so if anyone has any ideas that would be awesome.

This is the most weird camera I have ever seen, you have a miniDV tape camera appartently without a Firewire I/O connector. I just looked at this Canon specification http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=177&modelid=1620 6#ModelTechSpecsAct
and there is nothing about a Firewire/IEEE-1394/etc. Without a firewire interface Premiere is unable to capture video. apparently there is some software supplied with the camera, maybe it can capture the video via the USB interface to your computer and then (if it is the correct format) you can import it to Premiere.

Unable to capture the value of vbrk-vbeln value from VF02

Hi All,
am printing form from VF02 ,,,once i execute the VF02 , and select Billing Document -> Issue Output to option .., my printi program gets triggered ,......,
but in my print program am unable to capture the value of VBRK-VBELN which i have entered in the VF02 tcode..
any other table the value of VBELN is stored???
pls help me out with the alternatives...
thanks
john

Hi Dhiraj
One doubt how the value is populating in the NAST in the Print Program . While debugging i'm getting the Values from NAST but i want to know from where NAST is loading with these data.
Thanks
Bintu

Unable to capture data from drop down list in custom added field in migo tcode at item level

Hi guys,
need bit help in resolving query related to custom added field in Tcode migo.
i have added a field in migo at item level ,in this i have used drop down list
to get data but unable to capture data from drop down list.gown through
many blogs in scn but unable to resolve.
Please help me out in this.
Thanks,
Umakant.

Hi,
U can use following code to fill the list box
write this code in PBO
In layout editor please select listbox in dropdown attribute of input field and put some fctcode attribute
TYPE-POOLS vrm.
DATA values TYPE vrm_values WITH HEADER LINE.
TABLES: <ur custom Database table>.
clear values, values[].
SELECT * FROM <ur custom Database table>.
    values-text = <TABLE FIELD TO DISPLAY IN DROPDOWN> .
    values-key = <TABLE KEY FIELD TO DISPLAY IN DROPDOWN>.
    APPEND values.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = '<SCREEN INPUT FIELD NAME>'
      values          = values[]
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
Also please define the following before accessing the listbox value
data: <listbox input field name> type <table field name>,
        <inputfield name where text to display> type string in top include
In PAI, select the text from the table into <inputfield name where text to display> depending on value selected which will be called when enter key is pressed or any vale is selected

Unable to capture video from webcam in JMF in xlet

hi
I am unable to capture video from webcam in an Xlet. I am using Xletview to run Xlet. The method CaptureDeviceManager.getDeviceList(vidformat) returns empty array. Which videoformat should I use and why do I get empty array?
Thanks
Rajesh

MHP and OCAP only use JMF 1.0, which does not include support for capturing video. You will not be able to do this in any current MHP/OCAP imlementation that I know of.
Steve.

Unable to capture video from webcam in JMF

hi
I am unable to capture video from webcam in an Xlet. I am using Xletview to run Xlet. The method CaptureDeviceManager.getDeviceList(vidformat) returns empty array. Which videoformat should I use and why do I get empty array?

MHP and OCAP only use JMF 1.0, which does not include support for capturing video. You will not be able to do this in any current MHP/OCAP imlementation that I know of.
Steve.

Final Cut suddenly unable to capture from any source

I suddenly started having an inability to capture in Final Cut. I have always used Final Cut Express and a Sony handicam and a firewire port.
2 weeks ago when I went to capture I started getting “dropped frames” error messages. As you know, unchecking that feature in FCE or FCP simply results in video and audio that don’t match up. Anyway I tried that and it didn’t work.
I have used two other firewire cables
I am using OS 10.5.8
in trying to fix this problem, I upgraded to Final Cut Express 4 (from 2.0)
I trashed preferences.
I used disk repair and verify permissions
I booted up and down
then I gave up on the sony handicam and connected my G5 to a JVC editing deck I have, the JVC SR-DVM70.
When I connect my G5 to my JVC deck through the firewire In/Out port, I get the message, “VTR OK” so the connection is there.
When I hit “play” in Final Cut, it does control the deck and makes it play—but I do not see the video in Final Cut; I only see it on the JVC deck monitor.
When I hit “stop” it does not make the JVC deck stop. The only function it seems to control is simply “Play.”
Then when I go to capture, I get the message: "unable to capture because there is no video."
I have tried several different “Easy Setup” settings, including several firewire settings (including basic firewire) and several NTSC settings and a PAL setting.
Weird.
anybody out there a genius with this?

There is a separate forum for FCE.
Make sure you are using the correct HDV settings in FCE and that the camera is set to output HDV and not downconvert.

Windows Movie Maker - unable to capture from sony handycam

I am using Sony Handycam DCR-HC2 camcoder and my laptop is sony vaio vgn-nr160e. Before upgrading to windows 7, I was able to capture home made movie with Click to DVD program via i-link cable with vista home.
From the time I update to Windows 7, I am unable to capture home movies. Presently I am using windows movie maker 2.6. When I connect my handycam to laptop with i-link, it won't reconize.
Please some one guide me, we are planning a 2 week vacation and I am going crazy with this issued ( I am an avg tech guy, not a expt)

I have
Windows 7 RC
Sony handycam DCR-TRV19
Sony iLink cable
Full Windows Live package installed
and have had similar results.
With the Sony cable (verses a 4 pin to 4 pin cable) I do get DV IN on the camera when I connect.
But in device manager it does not show up under IEEE or as an Image Device :-(
That's as far as I have gotten. Hoping someone can find the little nugget to get this going.
Hi
Here are a couple of links that may help.
Sony eSupport - Digital Camcorders
Sony eSupport - DCR-TRV19 - Support
Hope this helps.
Thank You for testing Windows 7
Ronnie Vernon MVP

Panasonic HDC-SD100 media card unable to capture on Final Cut Express 4

No problems at all with transfer to i-movie but just purchased final cut express 4 and problems with capturing from the media card. Signal system on camera is 1080/50i. Have tried setting HD and 1080/50i in the easy set up but no joy. Have tried log and transfer and see clips but on transfer message states no data. Can anyone help with the settings please?
Many thanks in advance

Welcome to the forum!
There are many things that could cause this, and almost all have been discussed.
Some things to try:
• In the Log and Transfer window, click the preferences button (the gear in the upper right). Make sure audio is set to *Plain Stereo*
• Also in that preferences window, click the button to *Clear the Cache*
Also, what drive are you using to capture to (internal or external)? How is it formatted, and how much space is left on that drive?

What is the BEST cable connection from Canopus ADVC 300 to Black Magic Intensity Pro HDMI PCI Express Capture Card?

I must connect an ADVC 300 to a Black Magic Intensity Pro HDMI PCI Express Capture Card. For best quality, which cable should I use?
On the ADVC 300 there are outputs of firewire, S-VHS and RCA.
On BMPro it's a little confusing. On the breakout cable there are connectors that say:
-5 B-Y OUT
-4 Y OUT
-3-R-Y OUT
-7-R-Y IN
-8-Y IN
-9 B-Y IN
-15 AUDIO IN RIGHT
-10 AES/EBU OUT
-12 AUDIO LEFT OUT
-14 AUDIO LEFT OUT
-13 AUDIO RIGHT OUT
With the BMPro, there is also a separate, shorter cable. On one end it looks like S-VHS and on the other there are two connectors, one black and one blue.
On the actual BMPro Express card strip instead of using the breakout cable, there is HDMI IN (and HDMI OUT).
How should I connect this? Is there an adapter cable of FIREWIRE TO HDMI?
Any help is much appreciated.

Well, when I researched how best to digitize VHS (into Final Cut Pro 7), I learned two of the best devices to use are BMPro and Canopus ADVC 300. I’m using the ADVC 300 for the built-in time base corrector. I definitely want to use that to stabilize the video. I also read how well BMPro improves image quality. So, I thought to use the two together must produce outstanding quality (well, as good as VHS can be).
Perhaps I got confused into thinking I can use both. But the BMPro appears to have an S-VHS adapter.
I guess I’m wondering what is better quality:
Run the firewire from the Canopus ADVC 300 converter directly into the firewire port on the Mac Pro
Or, run an S-VHS cable from the Canopus ADVC 300 into the BMPro Capture card
(I should mention that I have purchased all these items and already have the BMPro Card installed so at this point it’s not a cost issue, but rather an issue of simply which works best?)

Can I capture the video from the TV card or video capture card to publish

Can I capture the video from the TV card or video capture card to publish?
I tried to use the USB camera, it's OK. But, will the TV card or video capture card also work?

Hi,
iChat will set up a Video chat window that takes in to account your Processor speed and Internet Speed and to some extent the Buddy's speed.
This then denotes the pixel content of each frame.
OS X 10.6.x tells me this is iChat 5 which in turn mean you have at least an Intel Core 2 Duo Processor.
This should be capable of 30 frames a sec at about 640 X 480 pixels (Check the Connection Doctor (Video Menu) and the Statistics tab during a Chat).
iChat 5 cannot do HD (Max of 4:3 ratio at the above figures)
After that it depends how you are recording the chat.
Quicktime X would do it.
iChat will do it itself (if the Buddy agrees)
10:14 PM Wednesday; February 1, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I am recording from my computer screen with an elgato game capture card. Why is the video blurry when I import it to Premiere elements?

I am recording my computer screen with an elgato game capture card. When I play the unedited footage on my own computer, it is clear and crisp. When I import the footage into premiere elements, it becomes blurry. It becomes even blurrier when I save the edited video. How do I keep the video clear? How do I fix it?

Betharoo
Thanks for the reply.
Please check out John T. Smith's information.
At this point, if you could tell us the file extension of the file involved, that would give us a start while you are
gathering the rest of the details.
You can easily get some information for us from Properties for your imported video that is blurry in the Editor.
1. Click on Expert to get into the Expert workspace of Premiere Elements 13
2. If you have not already, import your file into the program using Add Media/Files & Folder/Project Assets.
3. Open Project Assets to see a thumbnail for the video that you just imported. Right click that thumbnail,
and select and click on Properties from the menu that opens.
4. Tell us what is listed there is Properties - it should look something like this one which is specific for one of my wmv files.
Your information will be specific to the file that you right clicked in your Project Assets.
From what you have written so far, yours should show
Image Size 1920 x 1080
Frame Rate either 59.94 or 60
Also, please go to Edit Menu/Project Settings/General, and tell us what you see for
Editing Mode
Timebase
Frame Size
Pixel Aspect Ratio
even if the fields look grayed out.
Your project settings may be contributing your Edit area previewing problems.
All of the above will keep us moving forward in the troubleshooting.
Thanks.
ATR

Publishing H.264 from capture card

Hi,
I know the standard live publishing flow for DVR is:
Capture card (Raw video sample)>>>>>> FMLE >>>>>> FMS
The problem is, the capture card output the video sample as raw format, and the FMLE do the encoding job. It increases the load of the CPU.
What I am thinking is:
Some capture cards do not support DirectShow output filter but it provide a native interface to get the encoded H.264 from the card.
The capture card can encode the video into H.264 by the clips on the card and there is no cost on CPU
then if I can publish the encoded H.264 from card to FMS in my program. that will not increase the CPU load.
Capture card (H.264) >>>>>> my App >>>>>>> FMS
How to send the H.264 frames to FMS?
Open a video channel then send the H.264 frames one by one?
And what client / library should I use?
Adobe RTMP SDK, how much does the lisence cost? my project is just a tiny one and we can't pay much on it.
Then the only choice is Red5 RTMPClient?
THank you

Yes you need to push data to FMS via RTMP - so you would have to use RTMP SDK for it. I dont know much about Red5 client.
As far cost of RTMP SDK is concerned - again i don't have the data , but i can ask someone to get in touch with you if you are really intrested. In that case drop in mail to me at [email protected] with your contact details

Urgent: Unable to capture from TV Capture Card

Similar Messages

Maybe you are looking for