Urgent - Updates no longer working after certificate renewal (production app)

Hi,
Updates pushed for our production AIR application are failing after a renewal of our expired code signing certificate, and performing the certificate migration procedure as outlined here:
http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS13ACB483-1711-43c0-9049-0A7251630A7D.htm l
The error message appears as: "This application cannot be installed because this installer has been mis-configured. "
The AIR app installer log indicates the source of the problem:
"The certificate of the installed app fails to match either the signature or migration signature of the AIR file"
However, the migration procedure has been executed exactly as described, using the correct certificates. The Adobe AIR 2.0.2 runtime (and adt) has been used.
We need to push an important update asap, and advising our end users to reinstall is not feasible.
I am willing to provide anything necessary to resolve this as quickly as possible. Please advise.

Happy to report that we found the source of the issue ourselves:
There is apparently a problem with ADT (at least in the AIR 2.0 SDK) where it will appear to perform a certificate migration succesfully, but in actual fact will silently fail and not update the .AIR file at all. This happens when the output filename is equal to the input filename, so this problem arises if you follow the example in the documentation:
http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS13ACB483-1711-43c0-9049-0A7251630A7D.htm l
A simple workaround is to choose a different output filename. In any case, be wary that ADT does not provide feedback whether a migration actually was performed. Check the file timestamp and size to be sure.

Similar Messages

Software update no longer works after 10.4.9 update

After I applied the 10.4.9 update, using the combo updater and fixing permissions both before and after, Software Update can no longer connect to the Internet. I also ran Onyx, but it didn't make a difference.
Any ideas? Could a network-end firewall make a difference?

I just came across an article on the Unsanity weblog, www.insanity.org/archives/macos_x/shock_andawe.php, entitled: "The Dangers of Updating: Don't Do Anything While Optimizing." It says there is a bug in 10.4.9, of which Apple is aware, that messes up "prebinding" if any other activity is done while the optimizating is going on. Using Mac Helpmate 1.1, I optimized "update prebinding." It characterized that process as "Reassociating applications with their dynamic libraries." It returned a log as long as King Kong's arm saying many times, "environment variable disabled use of prebinding in (file name)." An inability to Download Updates is not a result mentioned in the Unsanity weblog, but it may be a result nevertheless. I have frequently used other applications while downloading updates. If this is the cause of the problem, I still don't know what to do about it. John Nelms, [email protected]

T500 - Windows Update no longer works after using factory recovery disks.

I'm running Windows 7 32bit. I needed to restore my T-500 hard drive because of a fatal windows registry error caused by a 3rd party registry cleaner/tuner software... Windows 7 was DOA .
I used the factory recovery disks I created after I first fired up the laptop in April this year, all went well, Windows 7 booted up, and I went through the "Starting Widows for the first time" setup dialog, Windows 7 sucessfully activated... also verfifed it on the Microsoft website.
Went into control panel to have windows update pull down all of the critical updates released after I got my Thinkpad and I got a pop up saying "windows update cannot currently check for updates because the service is not running. You may need to restart your computer."
I checked... the windows update service is running, so is BITS. Following suggestions from Microsoft support, I have 1)deleted the softwaredistribution folder from C:\windows, 2) run their "fixit tool", 3) renamed the CatRoot2 folder in C:\windows'system32, all to no avail each time I tried to use windows update after each "fix".
I decided to check here if anyone here has gone down this path before and ask what fixed it?
I'm waiting for Microsoft support to reply to my last email informing them the last instructions to rename the CatRoot2 folder and retry windows update failed. They now have a copy of my windowsupdate.log file sent to them.
How about it... does this situation sound familiar to anyone?
Thanks.

I run into the same problem with fresh installation of W7 Pro on T530 with 1TB samsung disk.
This solution worked for me:
    Running check for updates will trigger this error message:
“Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer.”
Solution:
1.    Go to Administrative Tools/Services, and stop the Windows Update service.
2.    Then go to the folder c: /Windows/SoftwareDistribution and delete all of the files and folders.
3.    Then go back to Services and restart the Windows Update service which will recreate all of those folders again.
4.    Then manually run the Update Service and everything should work.

Windows Update no longer works after using Lenovo Enhanced Recovery

Using the system recovery backup disk I created when I first got my T500, I performed a recovery to a new larger HD that I'm upgrading to.
All went well, windows booted up and I got the "Starting Windows for the first time" message and then I went through the setup wizard... Did everything like I did when first got the T500. Windows 7 activation was successful
Now here's the rub, I tried to use Windows Update retrieve all of the updates released since April when my laptop was built. Windows Update flat out refuses to work. I keep getting a pop-up box saying "windows Update cannot currently check for updates, because the service is not running. You may need to start your computer".
I checked the Windows Update service, it's running. I've gone into the windows folder and deleted the software distribution folder as instructed by Microsoft support. They wanted me to also download and install a "CheckSUR" tool from their support website, but the install falls with a a pop-up from Windows Update Standalone Installer with an error: 0xc8000247.
Now this is all on the new HD, when I swap the older on back in there is no problem getting the updates.
I'm stuck, has anyone encountered this type of thing with Windows Update?

I executed the "fixit" in both modes at http://support.microsoft.com/kb/971058
Windows update still refuses to work. All pertinent services are running.
Since this is an attempt at installing a larger hd, I swapped back to the original drive and verified that windows update has no problems when running on the original HD.
I've now started again from scratch.
I put the new larger HD in a SATA/USB HD docking station that I just bought. I formatted the new HD clean, then instead of using the factory recovery disks like I did before, I used Acronis True Image, which I downloaded from the Western Digital support webpage, to clone the original HD over to the new one.
I powered off the laptop, pulled the original HD out and put the new HD in , unplugged the now empty SATA/USB HD docking station, booted up, windows starts and comes up with all looking fine, except... again, windows update still refuses to work.
I went back to the Microsoft website above, ran the fixit action in aggressive mode, and windows updates still gets the same result... When I open windows update in control panel, Windows Update is in red. When I check for updates, I get the pop-up saying "Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer".
A check of services shows that Windows Update, Cryptographic Service and Background Intelligent Transfer Service are all started.
This is really frustrating... this should be a simple HD upgrade. It appears that with whatever means that is used to copy or place an image of the original HD on the new HD, Windows 7 is not going to let me use update on the new drive.

Many Apps are no longer working after webOS 1.4 update! - please help!

Hi,
Many of my previously working Palm Pre Apps are no longer working after the webOS 1.4 update.
Here are the ones that just return a blank/white screen after launching so far:
SplashID
Daily Devo
Daily Light (Love)
Absolute Fitness (some options no longer work correctly & are returning a white screen and some options are working)
These are just a few of the Apps that I am having problems with and there are probably many others. I have also sent emails/posted to forums on the developer sites to advise. Hopefully I will hear something back soon.
Anyone else experiencing this issue as well with any Apps?
Thanks in advance for any help that you can provide.

SplashID on my Sprint Pre is showing just a blank screen after starting it and entering my password. I see no update for it in the App Catalog.
EDIT: Never mind. It appears that it only did that on the first launch. I closed it and restarted it, and now the screen in SplashID is correct.

HT1947 The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1. This seem to happen after the update. Any suggestions?

The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1.
This seem to happen after the update. Any suggestions?

Dear Apple friends,
I have the exact same problem with some apps.
Even when I try some websites in Safari and Chrome that require loading big chunks of data they crash.
Today it crashed in two new places. In the notification center and when I opened newstand app I no longer was able to return to the main window and the dock disappeared.
I have my ipad retina for about three months now but latelly this issue has became more frequent. What should I do?
Should I update to the latest firmware and do what raymond73 said?
Is there a fix for this issue?
Has Apple said anything about this? Because I see that this issue is happening to a lot of people.
Is it possible to downgrade to iOS 6?
Is it a firmware problem? That can be fixed in future releases? Or an hardware issue?
Should I wait or go to the place I bought it and try to get the money back?

Canon iP2700 is no longer working after update

My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2 from https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
tail -n 100 -f /var/log/cups/error_log
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
The CUPS ownership of the USB device file seems OK:
ls -l /dev/bus/usb/001/006
crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
EDIT
I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
Last edited by otx (2012-03-09 14:21:27)

See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

Mac Yosemite 10.10.2 -- System Pref. Java pane/ctrl-panel, Update-tab-function no-longer works, after updting to Java 8v40

Under the Mac Yosemite 10.10.2 O.S. -- the System Preferences: Java pane/ctrl-panel: Update-tab-function no-longer works, after updting to Java 8v40 JRE & SDK -- says that the internet connection is not valid !

A few questions....I assume your network is connected to the Internet? Do you use a proxy? If so, is it set in the browser or in the Java Control Panel?
-Roger

Md5 reborned hasher 0.9.0 no longer works after firefox update to version 20 ,redesigned download box doesn't give option

md5 reborned hasher which has worked previously no longer works after update to FF version 20 . the redesigned download box doesn't give the option to use the hasher.

If you use this add-on a lot, you might want to switch back to the old style download manager until the add-on's author can bring it up to date. This thread describes how to make the switch: [https://support.mozilla.org/en-US/questions/955204 Got new version, want to go back to previous download box, the new one has no history and doesn't show speed of download, how do I go back?]

Internet sharing no longer works after Lion 10.7.4 update

Internet sharing no longer works after Lion 10.7.4 update. Hopefully Apple will fix this shortly. Little excuse for this kind of screw-up.

so here is da answer
1. go to finder>(computer name)>macintosh HD>library>preferences
2. copy the entire systemconfiguration folder and systemconfiguration.old folder to your desktop
3. restart mac and device which you share intenet to
then you have internet that is about 3x slower than the da 10.7.3 intenet sharing, but works
then, just wait for apple to release da 10.7.4 fixed
please use da steps!

Apps no longer work after installing ipad2 update 4.3.5

Apps no longer work after installing IPad 2 update 4.3.5

i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

Drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

Zap the PRAM and Reset the SMC, then try again.

BlackBerry Classic front camera no longer works after update

The front camera on my BlackBerry Classic no longer works after the 10.3 update. The BBM video chat does not work either - error message, another application is using the camera. I tried rebooting and a factory reset and the problem still persists. Please help.

Hi,
the Classic was shipped already with 10.3
What 10.3 version do you mean exactly?
Alex
Please feel free to hit "Like" if my post was helpful :-) Thank You!

Epson printer driver no longer working after 10.4.11 update

It seems that my original Epson driver for my Stylus Photo 750 is no longer working after my latest Tiger update. The system does recognise it but shows an exclamation mark behind it and refuses to print with it (the document stays in the waiting line forever). Reinstalling as well as repairing permissions didn´t help. Fortunately the Gimp Epson driver is still working but I have no access to my coloursync profiles with this driver.
I know that many printer drivers need to be rewritten for Leopard (one of the reasons I didn´t update yet) but it is not understandable why problems happen with a Tiger update.
Does anyone know a workaround?
Thanks very much
Wolfgang

I just discovered a similar problem. I have an old Epson SC3000 and under 10.4.11 my computer doesn't communicate with the printer. It's an AppleTalk printer, connected via Ethernet. I tried bypassing my network switch and connected it directly to the Mac-- no go. I then rebooted into 10.3.9 and printing works fine.
I downloaded the driver from Epson and installed it in 10.4.11. When I try to add the printer in the Printer Setup Utility, the machine just hangs-- can't force quit the utility and eventually the Finder even stops responding. It takes a hard reboot to clear up.
I can't say whether or not printing worked in earlier versions of 10.4. I haven't been using 10.4 for very long, and I rarely use the SC3000.

Urgent - Updates no longer working after certificate renewal (production app)

Similar Messages

Maybe you are looking for