Urgent !!!!! Updating Inbound deliveries via Idoc type DELVRY05

Hi,
  Is there a way to update an existing inbound delivery through the Idoc type DELVRY05. I'm able to create an Inbound delivery using this Idoc type. But im not able to update the same. There is a field VBELN, in segment E1EDL20. But whenever i pass the Inbound delivery in this field, it takes this field as a reference and creates a new Inbound delivery. And then the referenced Delivery is updated in the field LIFEX in table LIKP.
Thanks for your help. This is a little urgent.
Thanks
Albina

Hi Ganesh,
Sorry, I was referring to BAdI /SAPSLL/ECC_INBOUND, but got the name slightly wrong.  As you say, the BAdI Method doesn't have a suitable parameter for making the updates - you would have to make the updates yourself in some asynchronous way (and I don't recommend it).
Yes, I understood your technical requirement, but you have not explained WHY you want to do it.  I wonder which Customs Authority you are dealing with?  I don't know of any that return additional document codes.  Normally the inbound iDoc is used to convey error messages or status changes from the authority to the GTS Declaration.  Here, it sounds like you are intending to use it for quite a different purpose.
Probably you should create your own Message Type, Process Code and Function Module to handle the updates.  You could copy much of the code from the standard /SAPSLL/IDOC_INPUT_CCECUS, but it would be a substantial development.
Regards,
Dave

Similar Messages

  • Processing Idoc type DELVRY05 whith  function module IDOC_OUTPUT_DESADV01

    Hi experts,
    I want to send automatically  an IDOC type DELVRY05 while saving the outbound delivery. i set the output message for shippement and the Outbound EDI parameters for the ship to party.
    When I'm processing the output message in VL02N, i'm having the following message:
    <<IDoc type DELVRY05 cannot be processed by  IDOC_OUTPUT_DESADV01
    Message no. E0029
    Diagnosis
    IDoc processing has been started for IDoc type DELVRY05. The selected process is of type  and called IDOC_OUTPUT_DESADV01.
    The selected process does not support processing of IDoc type DELVRY05.
    >>
    Is there any function module that i can use  in order to process an IDoc type DELVRY05?
    thanks for your help.
    regards,
    Hermann

    Hi Mohanaselvan
    thanks very much, It's now working !
    regards
    Hermann

  • Exit after updating master data of IDOC type FIDCCP02 in inbound isde

    Hi All,
    I am using FI_IDOC_CREATE_FIDCC2 fm in outbound side to create master record data and
    Fm IDOC_INPUT_FIDCC2 is used at inbound side to update the corresponding tables of IDOC type  FIDCCP02?
    Is the above process correctly update the tables related to idoc type  FIDCCP02 at inbound side?
    If so,Can anyone please tell me the exit or badi triggered after updating all the fields of IDOC type FIDCCP02 with the Fm IDOC_INPUT_FIDCC2?
    Thank you,
    Swetha. C

    Hi All,
    Can anyone please tell me the badi or exit triggered after the execution of fm IDOC_INPUT_FIDCC2 (used to post the IDOC type FIDDCP02)?
    I want the BADI or exit that is triggered after posting all the data to corresponding tables of IDOC type FIDCCP02 with the Function module   IDOC_INPUT_FIDCC2 in inbound side.
    Thank You,
    Swetha.C

  • Delivery date issue in the ASn inbound process via IDOC

    HI
    we want to start with ASN and we ´re already receiving IDOC´s
    DESADV Delvry03
    we are using Fm /SPE/IDOC_INPUT_DESADV1 and we have tried IDOC_INPUT_DESADV1 but teh reesult was the same.
    The segment E1EDT13 Qualifier 007/009/006  exist and we are able to create a inbound delivery. The problem we have is that we are not able to calculate the delivery date in the inbound delivery.
    The idea was that the vendors sends us the GI date (Qualifier 007) and our SAP calculates based on the plannend delivery time in the SA/PO the expected GR date 8what we see in MD04). But at the moment we only the creation date as delivery date.
    what do we miss?
    thanks for the help
    regards
    Alex

    Hi,
    Firstly, for DESADV processing delivery date field (LFDAT) is taken from qualifier '007' while goods issue is from '006'.
    As far as I understood you would like to get delivery date based on data from given delivery schedules. But note that inbound delivery items are not related specifically to delivery schedules. Instead, those are referenced to purchasing document items only. Therefore it is not exactly specified what delivery date should be selected for which inbound delivery.
    Alternative could be to perform scheduling for inbound deliveries based on route transit times etc.But in standard inbound delivery types are not available for SD scheduling and thus it is not directly available.
    If you need to get such functionality, you would need to use one of the DESADV processing u-exits available and include your own logic for lfdat calculations.
    Regards,
    Dominik Modrzejewski

  • Creation of  Inbound Deliveries through IDOC

    Hello All,
    I have a scenario wherein through SPRO the configuration has been set to throw an error message in case a new delivery is getting created through VL31N and the total quantity of the inbound deliveries created till now(including the one getting created now) exceeds the PO quantity , but the same is not applicable for deliveries created through IDOC.
    For example : I have a PO with order quantity of 2pc's
    I create 2 inbound deliveries each of quantity 1 . Now if i try to create a new inbound delivery through VL31N system throws a error message.
    But through an IDOC i am able to create any number of deliveries though the total of all the inbound deliveries exceeds the order quantity in PO.
    Is there any way that the same SPRO setting can be made active for Inbound deliveries created through IDOC also.
    Helpful answers would definitely be rewarded.
    Thanks in Advance,
    Sowmya.

    IDocs and BAPIs sometimes behave differently than transactions. You might need to add a user exit specifically for IDoc processing. Otherwise send a message to SAP and have them look at it.

  • Inbound Delivery via Idoc with more than 1 line fails

    Hi @ all,
    i try to replicate inbound deliveries from an external system to SAP EWM using Idocs (SHP_IBDLV_SAVE_REPLICA02 with MessageType SHP_IBDLV_SAVE_REPLICA).
    If there's only one position in inbound delivery it works, but if i try with two or more lines processing ends up with idoc-status 51 (WE02) and message 'Error inserting partner and location data at item level'  (SLG1).
    Any ideas to solve this problem?
    kind regards

    Hello Markus,
    "i try to replicate inbound deliveries from an external system to SAP EWM using Idocs".
    you are trying to send the information from non sap system?. Can you elaborate the scenario.
    Is the case you are sending ASN information directly to eWM system.
    Seems the process is more interesting. Can you please share details.
    regards
    Sastry

  • How to update freight charge via idoc DELVRY03

    Hi,
    We are using message type SHPCON for our inbound idoc, which will update the shipping info on the SAP delivery document.
    On the Idoc DELVRY03, i didnt find a place or segment where it will allow us to store/get the freight charge information from external system.
    Can someone help on this issue please.
    Thanks,
    -Naga

    Thank you Pankaj for your reply.
    I was hoping to know how the system handles this situation with standard idoc.
    Because i am new to the idoc world, i thought i am missing something.
    I will wait for some more responses, if i have no choice, then i will go with the enhancement.
    -Naga

  • Urgent: Updating Item Text  Via SAVE_TEXT

    HI Friends,
    I need to update the item text in me22n via some FM.
    Can somebody suggest some FM with eg..
    I have found SAVE_TEXT FM to update the item text.
    i am not sure about the parameters and value could any body help me with some code ..
    I have written a code like this
    I have got a error like the length of the header table passed is higher ...and goes to short dump.
    GW_THEAD-TDNAME   = 'Concatenated value of Ebeln and Ebelp".
    GW_THEAD-TDID     = ?F01?.
    GW_THEAD-TDSPRAS  = SY-LANGU.
    GW_THEAD-TDOBJECT = ?EKPO?.
      IT_LINE-TDFORMAT = ?*?.
      IT_LINE-TDLINE   = ?Test Create Text?.
      APPEND IT_LINE.
    CALL FUNCTION ?SAVE_TEXT?
        EXPORTING
        CLIENT                = SY-MANDT
          HEADER                = GW_THEAD
        INSERT                = ? ?
        SAVEMODE_DIRECT       = ? ?
        OWNER_SPECIFIED       = ? ?
        LOCAL_CAT             = ? ?
      IMPORTING
        FUNCTION              =
        NEWHEADER             =
        TABLES
          LINES                 = IT_LINE
        EXCEPTIONS
          ID                    = 1
          LANGUAGE              = 2
          NAME                  = 3
          OBJECT                = 4
          OTHERS                = 5
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Please help with some code /

    Hi
    thank you very much for your reply.
    Can you explain more about the inport parameters of the FM. lets say for example I need to update "item note" in the item of a outbound delivery with text " I am doind the testing". for this scenario what the are the parameters i need to send to the FM
    thanks
    sankar

  • Post Goods Receipt for Inbound Delivery via IDoc SHPCON (DELVRY03)

    hi all,
    I'm using IDoc SHPCON (Delvry03) for posing goods receipt for inbound delivry.
    Can anyone give a sample IDoc or tell which segments must be filled.
    Thanks!
    Regards,
    Hui

    Hi Uwe,
    Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
    The binary answer would be no. You should use WMMBXY or MBGMCR instead.
    But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
    We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
    I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
    Hope this helps. Let me know if you have more questions.
    Regards,
    Rudra

  • Creation of Inbound Deliveries via DESADV using EAN's

    Hi all,
    I've tried to get an answer/feedback on this in the SCM Logistics Execution, but didn't get a bite, so I'm trying this forum as the type of question seems more aligned to the content in it...
    I am trying to simulate an inbound delivery creation process using DELVRY06/DESADV for a PO. The issue I have is that the EDI provider will not be sending the material number in either the E1EDL24 (delivery line item) or E1EDL44 (HU item) segments - only the barcode (which causes a second issue).
    E1EDL24 has a field EAN11 which I have populated with the relevant EAN/UPC code and removed the MATNR and KDMAT values for the R/3 material. However I cannot get the inbound delivery to create without populating the material number.
    Also for the HU, we have the scenario of having multiple materials (E1EDL44) packed into a HU (E1EDL37). The DL44 segment only has material fields and no corresponding EAN field to identify the materials to be packed.
    If anyone has experience with this issue then I would love to hear what I can do. If there is something that is 'out of the box' i.e. SAP standard then that will be first prize for sure, but if I have to, then an enhancement may be required - hopefully not.
    Kind regards and many thanks,
    Paul...

    Hi Alex - I was hoping you wouldn't say that! It just seems a bit odd that an EAN being a universal product identifier isn't utilised within the inbound delivery process as they are supposed to unique.
    Thanks for the input. Much appreciated...

  • IBAN number not getting updated in ECC via IDOC CREMAS05

    Hi Experts
    We have a business scenario where the vendor is created in MDM and the data is sent to PI from where the IDOC posts vendor master details  to relevant tables in ECC.
    The IBAN information is provided in the IDoc in segment E1LFBKM-IBAN. However this IBAN datail is not getting updated in the Vendor master.All other bank data : Bank key, Account number, Bank Name, Country Key, Control Key are all getting updated except the IBAN number information.
    I have searched a lot in all the forums but could not find a solution to this. I have checked and dont seem to miss any configuration.Another strange thing is normally when doing XK02 the system proposes an IBAN number if the field is not updated on the basis of Bank Key, Country Key and account number - this is also not happening in my case.
    Please advise.
    Thanks in Advance
    Varun

    HI,
    regarding your missing IBAN proposal number, check SAPNET note 634191, maybe the proposed value is suppressed.
    Best regards, Christian

  • Inbound Delivery via IDoc DELVRY03

    Does anyone have a template of what fields to fill in for the DELVRY03 IDoc in order to create an inbound delivery in SAP? I am looking to create an inbound delivery document based on a DELVRY03 including packing info, tracking and serial numbers.
    Thanks
    Kevin

    Check out following link, it provides some sample mappings for delivery IDOC -
    http://www.sapgenie.com/sapedi/ansi.htm
    http://www.sapgenie.com/sapgenie/docs/o856v4010_template.xls
    Cheers,
    Sanjeev

  • Urgend! Create inbound shipment with IDOC

    Hello,
    Has anyone ever tried to create a inbound shipment ( VT01N; containing inbound deliveries) via Idoc? I have tried with message type SHPMNT and SHPADV, and Idoc type SHPMNT03. I only managed to create an outbound shipment.
    Propably sombody got a solution and can give me a hint?
    This would be very interesting for me!
    Thank you very much in advance!!

    Hello All,
    i have found : i use BAPI_CREATE_SHIPMENT with right parameters.
    MY

  • Delvry05 IDoc type

    We want to use Delvry05 IDoc type for our EDI 940 and 945. Can you please tell me what is the message type and function module for both inbound and outbound transfer of Delvry05 for 940 and 945? Thanks in advance.

    Hi,
    I don't think IDoc type DELVRY05 is avalaible in SAP 4.6C not even in ECC 5.0
    Please try DELVRY04 instead.
    Regards,
    Ferry Lianto

  • Idoc Type to add a new line item to existing Inbound delivery

    Hi Friends,
    we have one requirement.
    In the system Inbound delivery is created through Idoc. Once the inbound delivery is created, we need to change that inbound delivery by adding a new line item to that inbound delivery where the line item belongs to another PO. Means, I have an existing inbound delivery number for a PO having one line item. Now I want to add another line item into the inbound delivery for another PO. I have created the inbound delivery through Idoc using the idoc type DESADV. Now I want to change the inbound delivery for adding the line item. Can anybody please tell me which idoc type should I use for this above highlighted requirement?
    Thanks & Regards
    Satya

    Hi.
    I have one PO 4500000001 for which I have created the inbound delivery 180000001. This inbound delivery has been created through an IDOC. I have another PO 4500000002 having one line item. Now i want to add another line item into the inbound delivery 180000001 for the PO 4500000002 as second line item. To add a second line item to the existing inbound delivery, which IDOC type should I use.
    Hope it clarifies the requriement.
    Thanks & Regards
    Satya

Maybe you are looking for

  • [SOLVED] Hotkeys on Asus 1015 PEM

    Hey everyone, So i've been trying to install arch linux on my Asus netbook (ASUS 1015 PEM) and it's been working spectacularly well. Things have just been working that I wouldnt've expected, and it's really great. My only problem is that I'm currentl

  • This is a test of the emergency broadcast system

    In the event of a real Adobe emergency, you will be instructed as to where to go to get your Adobe unbroke.

  • N95 - "Already in use" Error Message

    Hi, I've only had my N95 for a bit over a week now, and up until a couple of days ago, it was all working great! Then I went to read a text message on my phone and it wouldn't let me open the messages tab (either on the menu OR from standby mode). I

  • Add new columns in result of Transaction ME2L

    Hello, My requirement is to add two fields from table EKPO (BEDNR and AFNAM) in the result of ME2L. Does anyone know how to proceed? Is there an exit which will enable me to do so? Thanks a lot for your help.

  • Nokia 6300 problem sms

    when im writing sms it shows  1000 characters when i  get to 890 it shows second messege being writed, shouldnt it be 160 characters per sms, what can i do, help