Urgent :Upgrade issue

Hi All,
Your prompt reply will appreciated .I have been asked to answer following by tomorrow.I am working for an upgrade 4.6c to 6.0 for a US client.Need clarification on:
What do we mean by"Checking whether the code breaks can be replaced by standard functionality in the newer version"?
Does it mean that we need to check if client had some customizations in previous version that became standard functionality in 6.0 version?
we have obtained a list of custom Programs, tables and user exits and I have been asked if there are any potential issues with all the custom programs, tables or user exits.What should I do for this?
Thanks in Advance.
Kriti

Hello Kriti,
You need to ask the person for clarification about these questions. There is always a risk when upgrading that standard functions may have changed between releases. Basically the programs and other components need to be tested to see if they still have the same behavior.
Regards,
Manny

Similar Messages

  • R12 upgrade issue:Not able to login using forms:Please help****urgent

    We have recently upgraded our instance from 11.5.9 to 12.0.4 in Windows 2003 server.
    We are unable to login to forms after upgrade, however we are able access self service responsibilities without any issues.
    We are getting APP-FND-01496 when we access any forms responsibility. We have tried all possible metalink notes with no luck.
    Any help to resolve this issue will be appreciated.

    Duplicate thread ...
    R12 upgrade issue:Not able to login to forms**please help
    Re: R12 upgrade issue:Not able to login to forms**please help

  • Upgrade issues OBIEE 10g to 11g along with OBIA upgrade

    Hi,
    I have to upgrade OBIEE 10.1.3.4.1 to OBIEE 11.1.1.5 along with OBIA 7.9.6.1 to 7.9.6.5(Informatica 8.6.1 to 9.0.1) at my client location and I have very little knowledge on it. and want to know/have help documents for upgrade.
    And if anyone in the forums involved in upgrade please list the errors/issues occured during upgrade and after upgrade.
    1. OBIEE 10g to 11g upgrade issues??
    2. OBIA OBIA 7.9.6.1 to 7.9.6.5 upgrade issues along with 10g to 11g??
    3. Informatica 8.6.1 to 9.0.1 upgrade issues??
    4. DAC upgrade issues??
    any response for my questions is appreciated.
    Thanks
    Jay.
    Edited by: Jay on Apr 11, 2012 9:11 AM

    HI Jay,
    We cannot explained thread list here, If you get any errors plz post me,will try to help out.
    This is oracle document link - This document has given step by step with screen shots upgration for 10g to 11g ,Please refer the below link.
    http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm
    http://obieemanu.blogspot.in/2011/05/rpd-upgration-from-10g-to-11g.html
    http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm#ASMAS149
    Award points it is useful.
    Thanks,
    satya

  • Report generation toolkit upgrade issues

    I have created multiple vi's in that utilize the previous report generation toolkits specifically using the Generate Report Get Data to Modify.vi and the Generate Report Set Modified Data.vi.  Obviously the report reference has now changed in 8.6's version of the report generation toolkit and these vi's do not exist in the 8.6 library anymore.  What vi's do I need to replace these functions with to make this code work.  Can anyone tell me what the work around is to solving this problem.  This is a picture of the code.
    BJD1613
    Lead Test Tools Development Engineer
    Philips Respironics
    Certified LV Architect / Instructor
    Attachments:
    code.JPG ‏92 KB

    Hi BJD1613,
    The Report Generation VIs on the LabVIEW Palettes mutate properly. However, you may run into upgrade issues if VIs distributed with LabVIEW, but not available in the Palettes are used in the code. Hence, I would caution against using them for the same reason.
    In this case, the specific references do exist in the report generation classes; however, since they are private, they cannot be accessed by VIs outside the respective classes. A temporary workaround for now is mentioned in the following KB 4OOCSJ4M Getting References in Report Generation Toolkit 1.1.3 with LabVIEW 8.6.  
    This was reported to R&D (CAR# 123064) for further investigation

  • EHP Upgrade Issue - Java Stack

    Hi,
    Our Source System at NW 7.0 SP13 and we are upgrading the system to EHP1 SP03.
    Upgrade failed at Downtime > DEPLOY_ONLINE_DEPL phase.
    Error log:
    Sep 9, 2009 10:11:51 PM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
    Sep 9, 2009 10:11:51 PM [Error]:             com.sap.sdt.jspm.unattended.RequestController.addContextInfo(RequestController.java:178) [Thread[main,5,main]]: Deployment of queue sapjup-queue completed with error
    JSPM version is 7.01.3.0.15. Current JSPM log directory is /usr/sap/XPD/JC00/j2ee/JSPM/log/log_2009_09_09_16_09_42.
    Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.createAndLogRapiException(SAPJupJSPMRapiAdapter.java:698) [Thread[main,5,main]]: The deployment of the queue failed.
    Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.deploy.SAPJupJSPMDeployer.deployList(SAPJupJSPMDeployer.java:68) [Thread[main,5,main]]: Could not execute deployment of stack file /usr/sap/trans/EPS/in/XPD.xml.
    Sep 9, 2009 10:11:51 PM [Error]:      com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.execute(PhaseTypeDeploymentManager.java:519) [Thread[main,5,main]]: Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase UPGRADE/DEPLOYMENT_BASED_UPGRADE/DEPLOY_ONLINE_DEPL has been completed.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2009/09/09 22:09:42.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2009/09/09 22:11:51.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:02:08.248.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
    I went through the following link , proceeded with option 2, But still getting same error.  
    Portal Upgrade Issue
    Please advise the resolution for the issue I have.
    Thanks in advance
    Regards
    Srinivas
    Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM
    Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM

    Issue resolved

  • Upgrade issues list needed

    Hi,
    We're currently on 4.6b and going to upgrade to ECC6 with unicode I'm trying to compile a list point taken care converting to unicode from ABAP technical point of view. Does anyone have such a list?
    Some points i shortlisted are :
    1) Use GUI_UPLOAD and GUI_DOWNLOAD rather than WS_UPLOAD and WS_DOWNLOAD.
    2) Structures or table headers that contain non-character data need to be identical when moving, comparing, selecting into, updating from, etc.
    3) OPEN DATASET filename IN TEXT MODE FOR INPUT ENCODING DEFAULT.
    I know there are others. Any help would be appreciated.
    aRs

    Check the below links
    http://www.sapfans.com/forums/viewtopic.php?t=268386&highlight=upgrade+issues
    http://www.sapfans.com/forums/viewtopic.php?t=263434&highlight=upgrade+issues
    http://www.sapfans.com/forums/viewtopic.php?t=261051&highlight=upgrade+issues
    http://www.sapfans.com/forums/viewtopic.php?t=253316&highlight=upgrade+issues

  • Errors in Forte 3.5 -Upgrade issue

    hello ,
    We are having a frequent disruption in the communication SO which has an
    externalConnection Class. Did anything change in 3.5? We did not have
    these errors in 3L!
    After these erros, we have a mutex locking problem which leaves our
    application hanging.
    Any help will be greatly appreciated!
    thanks
    suma
    Here is an Excerpt of the log file
    Task 9: extConn4030a808.Write: 194 bytes written to 10
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Error #: [501, 152]
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Thu May 24 09:16:29
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    "MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
    INFORMATION: Error parameters for Set:0 Msg:0:
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Thu May 24 09:16:29
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
    Task 9: extConn4030a808.Write: 233 bytes written to 10
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Error #: [501, 152]
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Thu May 24 09:16:47
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    "MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
    INFORMATION: Error parameters for Set:0 Msg:0:
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Thu May 24 09:16:47
    regards,
    Suma Venkatesh

    -----Original Message-----
    From: Venkatesh, Suma
    Sent: Thursday, May 24, 2001 2:39 PM
    To: '[email protected]'
    Subject: Errors in Forte 3.5 -Upgrade issue
    hello ,
    We are having a frequent disruption in the communication SO which has an
    externalConnection Class. Did anything change in 3.5? We did not have
    these errors in 3L!
    After these erros, we have a mutex locking problem which leaves our
    application hanging.
    Any help will be greatly appreciated!
    thanks
    suma
    Here is an Excerpt of the log file
    Task 9: extConn4030a808.Write: 194 bytes written to 10
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Error #: [501, 152]
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Thu May 24 09:16:29
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    "MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
    laxrc2.
    INFORMATION: Error parameters for Set:0 Msg:0:
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Thu May 24 09:16:29
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
    Task 9: extConn4030a808.Write: 233 bytes written to 10
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Error #: [501, 152]
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Thu May 24 09:16:47
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    "MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
    laxrc2.
    INFORMATION: Error parameters for Set:0 Msg:0:
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Thu May 24 09:16:47
    regards,
    Suma Venkatesh

  • A very urgent deployment issue about DBAdapter

    Hello All,
    I have a very urgent deployment issue about DBAdapter.
    That DBAdapter is connect to DB2 AS400 Database. I have a developing database (jdbc:as400://server01/TEST) and a production database (jdbc:as400://server01/PROD).
    During developing, I used DBAdapter wizard to create it, and import some tables, and set the Adapter to use jabc/DB2DS as connection information for easily deployment later.
    Then I deploy to Production. I configured Data-source.xml and oc4j-ra.xml rightly; I set DB connection point to production database. But the DBAdapter still write into developing Database.
    I checked the DBAdapter, the imported tables are something like this, TEST.table1, TEST.table2. And there are a lot "TEST" located in DB2Writer_toplink_mapping.xml, DB2Writer.xml, TEST.schema, DB2Writer.table1.ClassDescriptor.xml.
    This TEST is refrer to the TEST in connect String jdbc:as400://server01/TEST.
    I think this might be the reason cause the problem. As to production database, "TEST" should replaced by "PROD". If I changed it manually, I have to change every time when switch between TEST and PROD. And I also don't know if it is safe to do it? (I tried, and bring some toplink mapping problem)
    By the way, for Oracle Database, because we use 2 instances for testing and production with same schema name, and do not have this issue.
    Anyone could help and many thanks.
    Kerr
    Message was edited by:
    Kerr

    Hi Kerr,
    The idea is to set up all connections in the BPEL or ESB services with logical names, e.g. typically of the form eis/DB/MyFinancialSystem or eis/DB/MyLogisticsSystem. This way, you do not have to modify code when deploying it onto different environments that serve different purposes.
    When moving your services through their lifecyle, on every environment you deploy these to you will have the same logical connections configured on each instance, e.g. for DEV, QA, SIT, UAT and PROD. Only, in case of QA the actual physical connection is configured to point to the QA instance of the systems that your services interact with whereas in case of UAT it points to the UAT instance of the same system.
    Maybe your problem is caused by connecting as user "SomeUser" when running the DB Adapter wizard during development and actually selecting objects from a different schema than you used to connect with, e.g. "Test" in your case.
    Hth,
    Sjoerd

  • ECC 6.0 EHP-4 upgrade Issue in phase MAIN SHDRUN/ALTNTAB FILL were negative

    Hi Basis Expert,
    while doing ECC 6.0 EHP-4 Upgrade in MAIN_SHDRUN/ALTNTAB_FILL phase we are getting the following issue please help us.
    Checks after phase MAIN_SHDRUN/ALTNTAB_FILL were negative!
    Last error code set: BATCH JOB RDDNT2MT FAILED: Error(s) found in the log(s), accumulated in "ALTNTFI.ELG".
    We check the shadow instance is up and we can log in to the system. Check ST22 and SM21 notice no error.
    Check the JOB RDDNT2MT (SM37) successfully running and all the job finish without any error.
    Hope anybody can share a bit your experience on this issue. we try search the note and  find the forum but no luck.
    Thanks

    Hi,
    > 2EETG011 "No shadow system""(environment parameter)""auth_shadow_upgrade"
    > 2EETG011 "No shadow system""DB-connect not against shadow tables !"
    >
    It looks from your log that shadow system is not able to connect to database. Please check your shadow system. Check below link as well:
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/ecc-6-upgrade-issue-in-phase-altntab_fill-1556272
    Thanks
    Sunny
    Edited by: Sunny Pahuja on Oct 15, 2010 1:27 PM

  • Upgrade issues list

    Hi All,
    I was wondering if anyone had a list of Upgrade issues (most likely, from ticketting system) to the 5.0 system.
    Thanks

    Hi mark,
    Can u please send me the  upgrade issue list to this email address
    [email protected]

  • IDSM-2 - upgrade issue - 5.x to 6.x

    Hello All,
    I have an issue upgrading the IDSM-2 module I'm playing with.
    It is currently running version 5.0(2).
    The thing is when I try to upgrade the image to the latest 6.x version using the .bin.gz file, I get the follwing error message :
    The filename IPS-IDSM2-K9-sys-1.1-a-6.1-2-E3.bin.gz is not a valid upgrade file type.
    Continue with upgrade? []:
    There is no image file that is not .bin.gz on the download section of the website. Only recovery images have the .pkg extension.
    Does anybody how to troubleshoot this simple(I guess) upgrade issue?
    Regards,
    Thibault.

    You are trying to "upgrade" using a "System Image" (-sys-) file instead of an Upgrade file.
    The upgrade file for the IDSM-2 is the standard upgrade file used across almost all IPS/IDS models:
    IPS-K9-6.1-2-E3.pkg
    It can be downloaded here:
    http://www.cisco.com/cgi-bin/tablebuild.pl/ips6

  • Frustrating Phone Upgrade issue

    We need help with phone upgrade issue we encounter when BestBuy associate process our upgrade. Associate is saying we are not eligible but we have not done any phone upgrade since Jan 2011. Our ATT mobile service was established with BB in 2009 and we only upgraded 2 phones in Jan 2011 thru BB. The only recent change in January 2013 was a change of responsibility between my spouse and me since my company has a better employer discount thru ATT. No change and per ATT, no contract and we should be able to upgrade in any retail store. But BB keeps telling us we have issue with ATT and can do our upgrade only with ATT Corporate Store. Our mobile account is a regular family plan account as originally established with BB and just like any BB customer, have employer's discount attached. I don't understand how BB system communicates with ATT system so it is hard for me to explain to ATT what "error message" BB associate is receiving. It has become so frustrating with BestBuy telling us to check with ATT and then for ATT to tell us that there is no issue at their end. We have been a loyal BB customer with all major appliances bought from them including protection plan. The least they can do is work with their ATT representative to figure out between themselves what the issue is. Here we are willing to give both companies our business with new phones and new contracts and no one can help us out.

    LTGee -
    I am very sorry to hear about this. I am going to send you a Private Message to collect some information from you to see if we can get to the bottom of this. To check your private messages, ensure you are logged into the forum and click on the envelope on the upper right hand side of the forum.
    Thanks!
    Jesus|Senior Social Media Specialist | Best Buy® Corporate
     Private Message

  • FCS2  "Something Happened" message at load, other upgrade issues URGENT

    Final cut studio has been giving me a "Something Happened" message every time I load it since after I upgraded it. What is this?? It seemed at the time that the upgrade to FCP Studio 2 installation went well...no weird messages or anything.
    I did the upgrade at the end of last year and Ive been using the software OK with three exceptions:
    1.- The FCP "Something Happened" message always appears when the OS loads...
    2.- The new COMPRESSOR wont load at all....ever! (I installed ALL upgrades frpom the web and ALSO downloaded the compressor upgrade (from Nov 07) and installed it "by hand", but to no avail.
    4.- FCP cannot render exotic effects (For example the ones that work in Motion)Final Cut pro asks me to upgrade my graphics card from the old 60 mb NVIDIA GEFORCE that came with the first system to a larger one.
    I just bought it through the net and it should be here in a couple of weeks. (I am in Nicaragua, Central America).
    I dont know what to do about the compressor (I need it urgently but dont know how to uninstall and reinstall ONLY compressor).
    My machine specs are
    Model POWER MAC 7.2
    CPU Power PC 970 (2.2)
    2 CPU Units
    Level 2 cache 512 KB
    Memory 4 GB
    Bus speed 1 GHZ
    Start ROM version 5.1.5 F0
    Serial G8429CVLPXD

    Dear Jerry
    Im very afraid of doing a full reinstall for a couple of reasons:
    1.-We dont have a reliable and FCP-savy MAC techie in Nicaragua.
    2.-I am not 100% sure I have ALL of the disks for all of the previous versions of the software
    3.- There are a lot of other things on that drive that I am afraid of losing.
    Do you have any other ideas??
    Do you think issues will be resolved when the new video card comes??
    Is there any way of installing (In the meantime) only the previous version of COMPRESSOR??
    Thanks for any help-
    Carlos
    Tanks

  • URGENT:upgrade to 3.0.8 issue Call to WPG_SESSION API Failed.Error-Code:6550

    I ran upgrade scripts to 3.0.8 from 3.0.6 and completed with no errors.
    csh diag.csh reports no errors.
    sqlplus to connect string works fine
    DAD connect string is correct.
    err text:
    Call to WPG_SESSION API Failed.
    Error-Code:6550
    Error TimeStamp:Tue, 5 Jun 2001 03:36:50 GMT
    Database Log In Failed
    TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
    Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
    DIAG.CSH output
    oracle(dba)@ws12:/export/home/upgrade:$csh diag.csh -s portal30 -p portal30 ->
    Begining Portal Diagnostics
    ...portal_schema: portal30
    ...portal_password: *************
    ...connect_string: iforce
    Loading java class for Portal Diagnostics ...SQL*Plus: Release 8.1.6.0.0 - Production on Mon Jun 4 20:48:59 2001
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    Connected to:
    Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
    With the Partitioning option
    JServer Release 8.1.6.0.0 - Production
    SQL> SQL> Creating Table 'wwsec_diagnostic$'
    Creating Sequence 'wwsec_diagnostic_seq'
    Diagnostics Report v 1.0: Oracle Portal v 3.0.8.9.8
    As of 04-Jun-2001 20:49:02 Schema Name: PORTAL30 SSO Schema Name: portal30_sso
    PORTAL30.wwsec_enabler_config_info$
    Login Server URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30_sso/portal30_sso.wwsso_app_admin.ls_login
    DAD : portal30_sso
    Host connection : successful.
    mod_plsql : working.
    JServ : working.
    Schema name : portal30_sso
    Connect string : iforce
    Authentication mode : Single Sign-On
    portal30_sso.wwsec_enabler_config_info$
    Login Server URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30_sso/portal30_sso.wwsso_app_admin.ls_login
    DAD : portal30_sso
    Host connection : successful.
    mod_plsql : working.
    JServ : working.
    Schema name : portal30_sso
    Connect string : iforce
    Authentication mode : Single Sign-On
    Partner Application Information
    **** Oracle Portal (portal30) ****
    Home URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30/portal30.home
    Success URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30/portal30.wwsec_app_priv.process_signon
    DAD : portal30
    Host connection : successful.
    mod_plsql : working.
    JServ : working.
    Schema name : portal30
    Connect string : iforce
    Authentication mode : Single Sign-On
    **** The Login Server (portal30_sso) ****
    Home URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30_sso/portal30_sso.home
    Success URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30_sso/portal30_sso.wwsso_home.process_signon
    DAD : portal30_sso
    Host connection : successful.
    mod_plsql : working.
    JServ : working.
    Schema name : portal30_sso
    Connect string : iforce
    Authentication mode : Single Sign-On
    Diagnostics completed successfully!
    Disconnected from Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
    With the Partitioning option
    JServer Release 8.1.6.0.0 - Production
    null

    Venu
    Have you also upgraded your 9iAS instance to 1.0.2.2? The WPG_SESSION API error commonly appears when you are not using the lastest version of mod_plsql contained in 1.0.2.2.
    See: Migration Guide for Oracle9iAS Solaris or NT/2000.

  • SSIS Oracle 11g 64 bit client upgrade Issue

    After the oracle client upgrade from 10g to 11g, the ssis jobs are getting failed for the BadImageFormatException. Attempt to load Oracle client libraries threw This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
    But the same package with same system requirements and same sql agent configuration is wroking fine in DIT. Please find below the system configuration in both environment.
    DIT
    Oracle Client - Oracle 11g 64 bit , Microsoft SQL Server - 32 and 64bit, Windows machine - 64 bt SP4, In job there is no configuration in command line to run in 32 bit mode since we are using the are using the .Net Provider/OracleClient Data Provider connection manager to the database .
    UAT :
    Oracle Client - Oracle 11g 64 bit , Microsoft SQL Server - 32 and 64bit, Windows machine - 64 bt SP4, In job there is no configuration in command line to run in 32 bit mode
    In UAT, Everything looks as DIT but the job is not working fine in DIT.
    I have gone through all the thread related to 32 64 bit, .Net Oracle client provide but i haven't found any solution for this problem.
    Can you please tell me the missed out configuration in DIT and UAT? the exact problem for this issue ? what is the oracle components required for this connection? Its urgent.
    What is missing in the oracle end?
    Thanks
    Satheesh

    32 bit apps will need 32 bit Oracle client software installed.
    Hope it helps,
    Greg

Maybe you are looking for