Urgent - Upgraded Form doesn't works well with values saved by previous ver

Hi all,
Form i m working on has changed many times due to change in requirments.
Everytime i do addition in old form, it doesn't works well be data saved by older versions.
e.g.
Current Version that i have upgraded fetchs the data well from database on query. But when i save it, clear or exit the form and then re-query that data, it doesn't show up instead meassage comes that query caused no records to be fetched.
i checked at database level, data is there.
and when i tried to call data from old form, it also refused to show it (data that was previously entered by itself but then saved by new form).
what could be the problem and i can i resolve it.
plz note that in all of this process, there are no database level changes, only form level changes.
regards,
yasir

sounds like spaces are being padded at the end of the data
check the length of the values you've changed in sqlplus and see if they are indeed right padded

Similar Messages

Sun one server 6.0 doesn't work well with explorer

We've sun one server 6.0 sp4 running in a sparc server as SSL server and too as common server on port 80. The most our clients , 95%, are explorer browser users.
The server has known bugs with SSL3 , interoperatibility with MSIE problem 532427. The solutions suggested in the server documentation don't work. We tryed the solutions suggested many times and in few time we got complaints from clients, people get "this page can't be displayed". I had to set the server to work with SSL2 only , althought security's reports tell that this protocol is not safe.
The second bug is concern the latencies loading pages with explorer. I apply the solution suggested, KeepAliveQueryMeanTime 1, it doesn't work well too. We don't feel the latencies on new machines or light browsers as avant , but we still feel these latencies with old machines or if the users uses modem. A lot of people still see very strong latencies.
I feel the server wasn't tested enough with explorer browser , it has so many compatibility problems with this browser.I think for the most webmasters the perfect compatibility with explorer is very important.
We payed for this server and it is worst than apache ,apache group fixed the SSL problem long time ago. Only one thing we need doesn't work well in apache then we contenue to use sun one server. But this diference is not enough to justify the use of this server if sun don't fix these problems. I'm talking about problems they exist more than 1 year, they were when i installed the server then i contenue to work with iplanet 4.1 and SSL2. I read the new version server characteristics, version 6.1 , i didn't find anything telling that these problems were fixed.
Yair Lapin
Hebrew University Webmaster

Yair -
Unfortunately this is a little vague. Can you tell us specifically what problem(s) you're having (unfortunately your current message does not go into adequate detail for us to understand the problems you see, or to make recommendations about how to remedy them).
Thanks
Joe

Am I Understanding Correctly That iPhoto Doesn't Work Well With Others?

After reading all the previous posts and topics on iPhoto vs. LR2 and such with RAW/NEF file formats, they simply don't work well with each other, right?
Basically, what I am trying to understand like a lot of others is that the way they read/write file info is dramatically different.
I just started using LR2 in the trial period and maybe I'm just not used to it yet but I still like using iPhoto for organizing my library of photos; it seems a lot easier with the folders and albums and such.
I also started using Nikon's RAW format NEF and working with them in iPhoto is a loser it seems.
Other than the obvious increase and control and options availabe for editing in LR, is iPhoto all that bad with working with NEF or RAW files? What is the downside to it?
Thanks for reading.
John

The problem is that Lightroom and iPhoto are essentially the type of application.
They are both Photo Managers, they both want to own and control the pics, to be your central “go to” app for whenever you want to get a photo. Obviously only one can be the primary application.
Lightroom - a rather more expensive application - is a professional app, aimed at the Pro Photographer. It’s a rather more powerful app in pretty much every way. For a point of comparison, Lightroom is closer to Apple’s Aperture rather than iPhoto.
On top of that, earlier versions of Lightroom had a bug in the way that it wrote metadata to the file and iPhoto was unable to import these files - tho’ I believe that’s been fixed since.
As to the RAW/NEF issue, There’s no point dealing in filetypes. Each model of camer produces a different RAW file, so what you need to tell us is the Model of Nikon you use. For instance iPhoto imports the NEFs from my D40 with no problems.
As to “working well with others” iPhoto integrates with just abou every app on your mac, make the pics available in every ‘Open...’ dialogue in the OS, with Mail app and an any image editor you care to mention.
Regards
TD

Track pad doesn't work well with photoshop

Hi,
While using photoshop home, sometimes I don't conect my tablet, as far as I'm good using the trackpad. Lately it doesn't work anymore as a brush, samp, eraser or whatever uses a brush size.
Reboot everything is the only way it works but not for long, after some operations in photoshop back to the problem...
Any help?,
Thanks

Nobody did offer any solution

Extreme w/static IP doesn't work well with iPhone

At our school I've installed a new Extreme Base Station, but we're having trouble with a couple of iPhones not automatically picking it up. Sometimes using the web browser or email makes it connect, but not always.
Our school district requires that the Base Station have a static IP address, and it's just bridging our wired network, not doing DHCP. With my older Airport at home the iPhone picks it up even before I can get out of my car in the garage - but it's not a static IP and there is another router on my network doing DHCP.
Does the static IP and no DHCP make the Airport connection not as automatic at school? I got this because one of our principals and I both have iPhones - and he's not real happy so far with it.
Any ideas welcome.

If your base station has a static IP address, what about any computers that are connecting to it? If there are any such, what are they using for IP addresses?
Everything in the entire school district (80+ schools, 50,000+ students) has a static IP.
Do you know why your school district has that policy? Would they be willing to allocate a set of IP addresses to your base station, so that you could configure it to "Distribute a range of IP addresses"?
I think they perceive the static IP approach to be more secure. No, we're not allowed to do any DHCP anywhere in the entire district - I've asked
It seems to be working fairly well now, it's just odd. If I stand near the base station with my iPhone:
-sometimes it automatically switches to the wifi icon
-sometimes it doesn't, but then does when you use Mail or Safari
-sometimes it uses 3G instead of wifi at first
It's like it takes 30-90 seconds for the iPhone to really recognize and use the wifi. I have never seen that before and the only difference is that this base station and the iPhone are static IPs and no DHCP.

Itunes doesn't work well with icloud - will Match make it perfect?

I was quite excited by the security and convenience possibilities of icloud and music. I am very disappointed that I have to buy a yearly subscription service to get if to work properly.
I am about to go through the six steps to get match for itunes working. And *that* requires a computer that I don't have.
Background: When I heard about icloud I thought 'What a great concept! I can backup everything - I lose my phone, my music - no problem.'
Not quite. Aside from other problems with icloud (another post coming) itunes is NOT integrated with icloud. NEW USERS BE WARNED. Weird thing is that icloud works for everything else, even my 1800 videos and photographs.
I did a restore from icloud and about 30% of my songs did not show up, 25% of my playlists were greyed out (empty) and 15% had disappeared. Songs showed up in some lists (purchased) but not others (albums?) What the heck? I observed that going to my account at itunes store showed everything and there was a cloud symbol with a downwards arrow, i.e. download. I have slow wifi at home and no data service on my phone so this was a headache downloading all my songs one by one and reorganizing/creating playlists manually. Imagine if I had 50000 songs! This hassle was even though *all* songs were purchased from itunes. Nit a single ripped CD or torrented song.
Based on multiple previous disappointments and different stories depending on who I talk to at Apple I am skeptical of whether Itunes Match will truly make my iphone5 musical experience seamless and problem-free. I have 5000 songs from various sources (mostly ripped CDs from public libraries but also some internet sources) on a hard drive overseas and the concept of replacing them with superior bit rates and album art is appealing. But I am cautious. His do I know Apple doesn't change the rules 5 years from now - technically or legally? And if I miss a yearly payment will my songs self-destruct?

iCloud is not iTunes Match. The two services are seperate and distinct and one service does not require the other. iTunes Match does not use iCloud storage, nor is it a backup service.
iTunes Match only scans, matches and uploads tracks in an iTunes library. It does not not do this on an iOS device. You cannot even purchase iTunes Match except through iTunes on a computer.
You should take a look at this page to get a better idea of what iTunes Match is and does: http://www.apple.com/itunes/itunes-match/

Yosemite doesn't work well with Autocad and the trackpad. The trackpad looses some function

The trackpad looses some functions with the Autocad. I can't use the PAN command with the trackpad, I used to work with that command in trackpad when I had the IOS Maverick. Pleas, check out the problem.
Regards.

Do you have this problem with Firefox or Chrome?
I think all you can do is let Apple know about this problem that needs fixing
http://www.apple.com/feedback

Is it true that Thunderbird does no longer works well with POP mail servers and only works well with IMAP servers?

Our email host is telling us that our outdated POP mail server doesn't work well with Thunderbird and it the reason we're having sporadic difficulty sending out emails with attachments when using Thunderbird (no problems when sending emails directly from the email host's web portal and bypassing Thunderbird). We'll often get notification when using Thunderbird and trying to attach PDF'd documents to an email that "Sending of message failed. The message could not be sent because the connection to SMTP server timed out." The email host company is advising that this problem will be solved if we upgrade from the free POP email to the not free IMAP email. True? Or are they just using this Thunderbird problem as an excuse to sign us up for unnecessary services?

I think they are using this as an excuse.
Messages are sent via SMTP. Both, POP and IMAP are protocols to receive mail.
In any case, it would be '''their''' 'outdated POP mail server', not yours.
Check this article for troubleshooting the problem.
https://support.mozilla.org/en-US/kb/cannot-send-messages

Why some contact forms doesn't work on some websites? We don't receive the submission form with the information?

Why some contact forms doesn't work on some websites? We don't receive the submission form with the information?

Hi Aish
I wanted to check the following, but the URL is not found, you have another one?
thanks
Nicole
4. Visit http://my-site.com/scripts/form_check.php in a web browser and make sure you see all green checkmarks. If some items do not display green checkmarks that means that the hosting server is not configured correctly to allow the Form widgets to send email messages to the address you've specified.
Contact your web-hosting provider about the server configuration problem. Describe the items that are not marked as green in the form check page, so that they can help you set up the servers to use the correct settings.
Il giorno 9-set-2014, alle ore 16:11, Aishvarya Raj Rastogi <[email protected]> ha scritto:
Why some contact forms doesn't work on some websites? We don't receive the submission form with the information?
created by Aishvarya Raj Rastogi in Help with using Adobe Muse CC - View the full discussion
Hi Nicole,
What is the "From" email address in your form?
Also, have you checked the spam folder?
Please check the following posts as well :
https://forums.adobe.com/docs/DOC-3581
Re: PHP mail may be disabled or incorrectly configured on the web server.
Regards,
Aish
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6714281#6714281
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesen't wor at all.

I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesn't wor at all. Is there any solution for this problem?

Hi!
I restarted the computer, but the same issue happens again. When I move my mouse over some object or tool, it doesn’t come active at all (only some of the tools works) When I try to change “site properties”, I can’t choose tablet or phone mode or even I can’t select the checkboxes, only thing what I can do is change the numbers (high and width) . After all the main problem is that I can’t select some of the items or functions by mouse, but only by the keyboard.

I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films.

I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

TS3367 facetime doesn't work well after upgrading to ios8. I need to make a call several times to connect.

Facetime doesn't work well after upgrading to ios8.
When I make a facetime call, it doesn't sound some times on the other side.
When it rings on the other side and is answered, it says (connecting), but it is still ringing on my side and never connected.
After that, I disconnect and make a second call, it sometimes connects, but not everytime.
I need to call several times to connect. It is really hard to connect through facetime after upgrading to ios8.
I purchased three iPad so far because of this good feature (facetime).
Please fix this issue as soon as possible.
Thanks.

Hi,
There are two easy fixes to this.
One, you can set up Family Sharing, in which you can have two different iCloud Accounts, yet still share the same apps, music, media etc.
Two, go to Settings and turn-off "Handoff". This can be found under the General page.
Hope this helps!

Word 2008 doesn't work correctly with Exposé ... !

Hi, this is more a bother than anything else, but somehow Word 2008 doesn't work well at all with Exposé, as the windows aren't "recognized" by Exposé and incorrectly delimited ... Anyone having the same problem ? Cheers !

Thanks for your answer. No special circumstances, just that when there's a window in Word 08 and I activate Exposé, the Word window doesn't get highlighted when I hover over it, or the highlight is not aligned on the window ... I don't know if I'm being crystal clear. What's sure is that it's quite hard to select a Word window in Exposé on my computer !

New FocusTraversalPolicy Mechanism Does Not Work Well With OO Designs

I would like to complain about the new focus traversal mechanism not working well with object-oriented GUI designs.
Specifically, we have many reusable panel classes that can be swapped in and out of reusable dialog classes. On some of these panels, the default focus traversal is not what is desirable, perhaps because one component on the right side of the window is just slightly higher than a component on the left side, maybe due to the component on the right having a label on top, and so the default focus goes to the component on the right instead of the left. So we have a need to be able to explicitly define the order of components in some panels.
If I try to define a focus traversal policy in the panel's constructor, a NullPointerException is thrown because the panel's focus cycle root is null (the panel has not been added to any dialog or frame yet).
If I try to associate a focus traversal policy at the dialog level, it would have to explicitly reference its child panels' inner components, which would break the encapsulation of the panels. It would also make it hard to have generic dialog classes into which various reusable panel objects can be swapped.
Someone suggested making each panel a focus cycle root. This makes it hard to "break out" of one panel to move on to the next panel in the dialog. Special keys would have to be assigned to try to cycle out, and these keys would have to be different than the normal traversal keys, making them inconsistent and nonintuitive to the user. Also, the focus policy would have to know if the dialog had more than one panel, what order the panels were in to know whether to cycle to the next panel or not, etc. This is a mess.
Does anyone have any idea how to get around these problems? I have tried using a global focus policy with a global hash map of prev/next component key-value pairs, but we are still running into trouble with some deeply nested tabbed dialogs. It's just not possible to always have the focus cycle root in existence at the point where you want to explicitly define traversal between two components, or when you are trying to establish the default component for a panel in a tabbed pane.
Has anyone else run into similar issues?
Robbie Gilbert
[email protected]

I agree completely. One of the popular consultants on this forum stated that the new focus mechanism was more versatile and only a little more complex. I would say it's more than a little complex given the trouble average programmers are having understanding how it works...at least at first...and after understanding it realizing that they are going to have type their fingers off to update their code. Oh, and the dread of maintaining this awful mess.
I'm currently having the same problem as you Robbie. Some of my reusable panels need special tab ordering...that's not usually a problem, in most programming environments, till now. Now I have to go around the world and back just to get my stupid cursor to be in the right place when I hit the tab key??!!! and special key mappings just to get out of a focus cycle...lame.
And how is an IDE graphical designer going to work with this? It's not, that's how...ok maybe if some kind person or company creates a custom focus traversal policy editor of some kind, I don't know.
Good grief Sun! We need something to help us meet our deadlines, not solutions that force us to spend 80% of our time customizing every stinking bit of UI functionality we need!!!
JTables are even worse. I've mastered most of the garbage that is JTable after many months of pain and I don't know how I'm going to help my peers understand them in any short amount of time. Most of them were Oracle Forms programmers, not that that is any great solution either. But they will likely have problems.
In conclusion, I wish I had chosen another UI technology for our new product client, and may yet.

HT5037 The iPhoto Library Upgrader tool doesn't work. I've downloaded it, and follow the directions, but iPhoto still won't open.

The iPhoto Library Upgrader tool doesn't work. I've downloaded it, and follow the directions, but iPhoto still won't open.

Your Library is damaged.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
As for goign back: do you have an undamaged library?
Regards
TD

Urgent - Upgraded Form doesn't works well with values saved by previous ver

Similar Messages

Maybe you are looking for