Urgent-- User Exit- FB01. Changing field BSEG-XREF3
Hi,
I need a user exit for FB01. I need to give vendor name in field BSEG-XREF3.
Please specify exact user exit for this purpose as I already have list of exits being used by FB01.
Points will be awarded for best answers.
Regards,
Navin
hi
use this steps to find all the exits of fb01
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Similar Messages
-
User exit to change Field labels( text) in VT01N
Dear all,
I have a requirement to change the Screen name of External ID1 ans External ID2 in identification tab to Seal and Trail. Is ther a user-exit to do this.
useful answers will be rewarded
Thanks
JHi
Find the available exits with the following program:::
*& Report ZFINDUSEREXIT
report zfinduserexit.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
Execute the report, give the transaction you want to find user exit, and query( press f8 ).
If no appropriate exit is available you can go for badi's.
To search for a badi, go to se 24 display <b>class cl_exithandler.</b>
double click on method get_instance, get a break point on case statement.
execute and start the required transaction in new session.
look for variable <b>exit_name.</b> It would show the available badi's.
Hope this helps
<b>if it helped, you can acknowledge the same by rewarding</b>
Regards
Dinesh -
Is there any user exit for changing V1 field value?
Hello Expert,
Is there any user exit for changing V1 update value?
For example, sales order number will populate 2LIS_11_VAHDR-VBELN. If other value need to populate 2LIS_11_VAHDR-VBELN, can we use any user exit to customize the V1 routine?
Please forget the enhancement for 2LIS_11_VAHDR. Just populate the system field VBELN.
Thanks
F-B-IHi,
Use the 'usual' user-exit for transactional data in R/3 EXIT_SAPLRSAP_001 (CMOD). Here your can overwrite VBELN for each extracted record with the value you want.
Hope this helps.
Grtx
Marco -
User-Exit for changing Sales Document Number - Urgent
Hi Experts ,
Please suggest me the <b>User Exit for changing Sales Document Number.</b>
thanks,
Jayesh<b></b>hi jayesh,
chech this exit-----EXIT_SAPFV45S_002.
this exit's description says " Change Sales Document Using Configuration".
Other available exits are
SDAPO001 Activating Sourcing Subitem Quantity Propagation
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Enter these exits name in SMOD transaction and select components. u can find all the user exits available for this exit name.
Reward me if useful..........
Harimanjesh AN -
User exit to change account assignments
Hi gurus!
Can anyone tell me a user exit to change some fields in Logistics Invoice (MIRO), when a an fixe asset PO is made:
BSEG-BSCHL - Posting Key
BSEG-UMSKZ - Special G/L Indicator
BSEG-UMSKS - Special G/L Transaction Type
BSEG-HKONT - General Ledger Account
I apreciate any help, expecially because we already achieved GO LIVE.
Thanks in advance, Pedro MarianoHello Pedro,
We have the same requirement, how did you solve it?
I would really apreciate your help.
Thank you,
Elisa -
User exit MM06E005 - Customer fields in purchasing document
Hi,
I am using user exit MM06E005 - Customer fields in purchasing document to validate the line items in PO and display the value at header level.
My requirement is when the user enters the line items and press enter the validated value should get populated at header level.I had included a tab (customer tab) in that the value should get displayed.
likewise for each and every line items the value should keep on changing.
And
I the field that i had added at header shows the value during the save but once we come out and enter again,it is not displaying the same.
Regards
ManojHi,
Indeed the exit which you have specified MM06E005 comprises the enhancement for customizing fields and screens associated with it. may be you might not have activated the screen associated with the exit. the screen might have been created but missed while activating.
Regards,
Jagath -
User exit to change item level data in purchase order
Hi,
Can anyone let me know the user exit to change item level data in purchase order . there is a badi ME_PROCESS_PO_CUST for this but the issue is its method process_item gets triggered only when the item is changed. My requirment is
For purchase order document types u201CZSOu201D and u201CZCOu201D, where the purchase order is a u201CLimits Orderu201D only i.e. no materials or services on the purchase order, the print price indicator field should be set to u201Cblanku201D (unchecked). now i cant use ME_PROCESS_PO_CUST because process_item wont get triggered if there is no change in itemlevel data.
Regards,
RahulHi Rahul,
Probably EXIT_SAPLMEKO_002.
hope it helps,
Edgar -
Help - User exit to change item level data in Purchase Order
Hi,
Can anyone let me know the user exit to change item level data in purchase order . there is a badi ME_PROCESS_PO_CUST for this but the issue is its method process_item gets triggered only when the item is changed. My requirement is For purchase order document types u201CZSOu201D and u201CZCOu201D, where the purchase order is a u201CLimits Orderu201D only i.e. no materials or services on the purchase order, the print price indicator field should be set to u201Cblanku201D (unchecked). now i cant use ME_PROCESS_PO_CUST because process_item wont get triggered if there is no change in item level data.
Thanks,
RahulHi Rahul,
Probably EXIT_SAPLMEKO_002.
hope it helps,
Edgar -
User Exit for Changing G/L account in Accounting Document
hi all,
This one is urgent for me. If you guys can help.
Iam looking for a user-exit to change the G/L account while posting the accounting document.
If someone has worked on a similar user-exit Kindly help.
Thanks and Regards
VarunHi Experts,
The requirement is to change the GL account when PGI is done for a delivery.
I have coded in the above user exit for changing the GL account. I am facing the issue here.
I am changing the GL account through a user exit, but even before the user exit is called the standard SAP is throwing a error.
the Error is GL account is blocked for posting in the company code. This check is happening for the GL account what standard SAP proposes from the customization. The GL account that is getting picked is blocked in SPRO for posting in the mentioned company code. Because of the error message, our z code is not getting executed.
Kindly suggest if some user exits that can be used even before this error message. or let me know if you have any suggestions to over come this.
I have coded this in the enhancement point. Include MM07MFK0_KONTIERUNG_PRUEFEN and subroutine kontierung_pruefen.
Thanks, -
User exit for changing Sales order lines.
Hello experts ,
I want to delete the field "ROUTE" from all of the orders lines in sales orders, I have been using "USEREXIT_SAVE_DOCUMENT_PREPARE" but it does not seems to do the job.
What is the name of user exit that i have to use for this task and which structure should be used, is it xvbap ? is it vbap ?
Thanks for the help.
Avi.Hi,
find the user exit u required.
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
Best regards,
venkatawamy.y -
User exit for changing operation scap in PP order
Hi,
I want to know user exits for changing operation scrap in PP production order. Please help
Regards
ShaliniI could found only one at the moment...
QEVA0002 - Calculation of share of scrap in inspection lot
check if it is helpful.....else u can go on
CMOD - Utilities - SAP Enhancements - (Remove Maximum No of fields) - Execute (F8)
You will get all user exits.
Now i need points.... :)...My score is not gettin increased... lolz
kapil -
Need to know the user exit to change unlimited check box in delivery tag
Need to know the user exit,
To change the <b>unlimited check box(</b>EKPO-UEBTK) in <b>delivery tag</b> of <b>item details</b> for tcode <b>ME21N/ME22N</b> on <b>SAVE</b>.
Thanks in Advance.
BaburajHI Baburaj,
Use the BADI ME_PROCESS_PO_CUST to change the unlimited check box(EKPO-UEBTK)
Implement the BADI and insert the code in the method PROCESS_ITEM
Example code :
*Data Declarations
DATA: ls_mepoitem TYPE mepoitem,
ls_mepoitemx type mepoitemx,
ls_customer TYPE mepo_badi_exampl,
ls_tbsg TYPE tbsg.
INCLUDE mm_messages_mac. "useful macros for message handling
*here we get item data
ls_mepoitem = im_item->get_data( ).
*work area for price value
data : begin of it_eban,
banfn type mepoitem-banfn,
bnfpo type mepoitem-BNFPO,
pries type mepoitem-NETPR,
end of it_eban.
*Get the Purchase requisition price from EBAN table
select single banfn bnfpo preis from eban into it_eban
where
banfn = ls_mepoitem-banfn
and bnfpo = ls_mepoitem-bnfpo.
*if entry is available.
if sy-subrc eq 0.
*check if price is zero
if it_eban-pries EQ 0.
*if zero, set FREE field of PO to 'X'.
ls_mepoitem-uebtk = 'X'.
endif.
endif.
*Set updated fields
CALL METHOD im_item->set_data
EXPORTING
im_data = ls_mepoitem
Reward if Helpful***** -
User exit to change the storage section indicator (MLVS-LGBKZ)
Hi.
I'm looking for a user exit which be able to change the storage section indicator (field MLVS-LGBKZ) proposed by the material master data in the process of creating a TO (transaction LT06). I haven't found any user exit for this. Do you know any user exit to change this value?
Thanks in advancehi,
thank you for your response.
whatever the exit which you have been provided, not calling when i creating PR through MD50.
i need an exit which will trigger when we create PR through MD50.
Many thanks,
Regards,
kiran -
User exit to change sort on ME57 t-code in SAP MM
Do we have any user exit to change the sort on ME57 output screen, I have to sort ME57 by Storage bin, we dont have storage bin on ME57 output, so i have add storage bin and sort.
Can any body help me to solve this problem?
thanks,Hi Rohini ,
I have used BTE 1120 (Business Transaction Event) to change the value date for line items (BSEG-VALUT) for F110.
May be this can help u ..... try once ....
Regards,
AKS -
User exit to change material availability date
Hi Gurus,
my requirement is like I need to change the material availability date based on some conditions.
Is there any User Exit to change the availability date so that I can dump my code in the user exit .
If not is there any alternative process to get the solution.
Thanks,
Sudhaa.............Hi Sudha,
Can you tell me your requirement clearly please.
Regards,
Dhanunjaya Reddy
Maybe you are looking for
-
Anyone experience incorrect modification dates with 10.4 server?
Maybe this is a bug, maybe not, but I have received numerous reports from coworkers of a problem with the finder's 'modification' date for files hosted on 10.4 servers (running 10.4.3 now) in two separate locations. This behavior was not occurring pr
-
OEM edition of Crystal Reports for Simply Accounting - help w/invoice look
I updated our Simply Accounting from 2008 to 2010 and now our invoices print out differently: the address does not look the same, and so it doesn't fit properly ... how can I fix this? Thanks.
-
Partner function AG (Sold-to-party) - read the partner code
Hi All! I tried to write an ABAP code to get the alphanumeric key, which clearly identifies the partner with partner function AG (Sold-to-party) and RE (Bill-to-party) for the Outbound delivery. I want to compare this two values and output an message
-
Transfer itunes info from WIN to MAC
hi everyone, i just bought a new macbook last week, but I am wondering how do I transfer my old itunes information like my applicaions and playlist to my newly installed itunes in my macbook. Pls help.
-
Java incompatible with Mac's new Yosemite OS for Creative Suite Products
I own a MacBook Pro My serial number is: C1MHCBV5DV13 I updated to Yosemite this weekend. When I tried to open my InDesign CS5.5 and Photoshop CS5.5 I was told I needed to download a new version of Java. I was sent to Apple's website and I downloaded