URGENT!!!!Userinfo cannot display well on portal desktop using Win98 IE!!!!

Hello,
I browse portal which version is 2005Q1 in win98 chinese version, but the userinfo on the portal desktop left cannot display correctly. Here the userinfo should be chinese word with utf-8 code.
But in win2000 and XP, it display well.
The userinfo template is /etc/opt/SUNWps/desktop/ut_zh/UserInfo/html/content.template.
Please help me to solve it.

Do you use chinese version of Portal under chinese locale supported by 2005Q1 platforms? I'll assume your Window98 IE is supported chinese as well . Userinfo in one of channels under desktop. Do you have any other channel which display chinese characters? Look at userinfo channel configuration and select client=HTML to examine correct locale for this property. If you have more than one channel need to display localization character, please create different locale of desktop and apply them all together.
Look at the Portal customization manual for more detail. HTH, Jerry

Similar Messages

  • Cannot Delete CPTL file from Desktop using Vista

    Hi All,
    I cannot Delete CPTL file from Desktop using Vista. Explorer
    crashes. It is a Captivate 2 file.
    I have tried (with no luck):
    - logging in as a different user and deleting the file.
    - running explorer as an Administrator
    - uninstalling Captivate.
    Anyone got any ideas?
    Cheers,
    Raef

    Hi Raef,
    That is a strange issue. Here are a couple more ideas you
    could try:
    - Have you tried renaming the file (including suffix)?
    - Have you rebooted?
    - Do you get any error messages when trying to delete, such
    as "Acess Denied"?
    - Is your machine networked? Is it possible someone else has
    the file open?
    - Can the file be moved to another location or put in a
    folder (and then deleted)?
    - Have you tried using the Command Prompt / DOS mode to
    delete the file?
    It sounds like it could be a Vista issue so I would look at
    the Microsoft Vista forums too. Sorry I do not have an exact
    answer.
    IHTH,
    Aaron

  • Cannot display values in LOV when using oe_transaction_types in Web ADI Template in R12

    Hi,
    I use BNE_INTEGRATOR_UTILS.CREATE_TABLE_LOV to create a POPList by using the view oe_transaction_types, but there is no any data displayed in the order type column,  while can use table oe_transaction_types_tl to create the POP List and display value. Does the Web ADI LOV not support the MOAC? Here is the API:
      BNE_INTEGRATOR_UTILS.CREATE_TABLE_LOV(P_APPLICATION_ID     => 20009, --IN NUMBER,
                                            P_INTERFACE_CODE     => 'XXX_UPL_ORD_INTF', --IN VARCHAR2,
                                            P_INTERFACE_COL_NAME => 'P_ORDER_TYPE', --IN VARCHAR2,
                                            P_ID_COL             => 'NAME', --IN VARCHAR2,
                                            P_MEAN_COL           => 'NAME', --IN VARCHAR2,
                                            P_DESC_COL           => 'DESCRIPTION', --IN VARCHAR2,
                                            P_TABLE              => 'OE_TRANSACTION_TYPES', --IN VARCHAR2,
                                            P_ADDL_W_C           => 'TRANSACTION_TYPE_CODE = ''ORDER'' AND NVL(END_DATE_ACTIVE, SYSDATE) BETWEEN START_DATE_ACTIVE AND SYSDATE',
                                            P_WINDOW_CAPTION     => 'Order Type', --IN VARCHAR2,
                                            P_WINDOW_WIDTH       => 500, --IN NUMBER,
                                            P_WINDOW_HEIGHT      => 400, --IN NUMBER,
                                            P_TABLE_BLOCK_SIZE   => 10, --IN NUMBER,
                                            P_TABLE_SORT_ORDER   => 'NAME', --IN VARCHAR2,
                                            P_USER_ID            => -1, --IN NUMBER,
                                            P_TABLE_COLUMNS      => 'NAME,DESCRIPTION', --  IN VARCHAR2,
                                            --P_TABLE_SELECT_COLUMNS IN VARCHAR2,
                                            --P_TABLE_COLUMN_ALIAS   IN VARCHAR2,
                                            --P_TABLE_HEADERS        IN VARCHAR2,
                                            P_POPLIST_FLAG => 'Y');

    Duplicate post.
    How to restrict the display of Integrator in Web ADI
    How to restrict the display of Integrator in Web ADI

  • I cannot add shortcuts to my desktop using your suggested way!

    When I drag the icon to the desktop, it looks fine, but when I release the mouse button. there is no shortcut there

    I think the steps you are using might be out of date? In the old days, the site icon was immediately to the left of the address in the address bar. But now there is a different icon there: a globe, or lock, or warning triangle. You now drag ''that'' icon to the desktop to create the shortcut. Does that work?

  • Displaying Date and Time in portal desktop

    Hi
    I have been looking around for any info or guideline to display the <b>date and time</b> in the portal desktop. I could not find anything very helpfull. In visual admin you can swap lastname and firtsname and vice versa. Thou there is nothing about displaying date and time.
    Is it possible to display it and how?
    Thank you for any information
    Namira

    Where u need the time to be displayed.. If it has to be displayed in Masterhead you can programatically display it...
    import the par file for Masterhead, change it and replace it..
    Its a simple JSP page so that u can change it easliy..
    cheers
    gEorgE

  • Cannot display the Crystal Report from BW..very Urgent

    Hello Friends,
    We are executing the Crystal report XI report from BW 3.50 but cannot displaying andgiving the error messgae as follows....
    <b>Service cannot be Reached</b>
    <b>What has happened?
    URL http://sapprodbw.company.com:8112/sap/bw/sap/bw/ce_url call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system I12 with error code 404 and for the reason Not found.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:sapprodbw_I12_12-v:0-s:404-r:Notfound
    HTTP 404 - Not found
    Your SAP Internet Communication Framework Team</b>
    I'm getting the above error could plz help me .. its very urgent task for us..
    Thanks in advance for your valuable time...
    Sreedhar G.

    Hi Dinesh,
    I started all the services and i checked the Test service of ICF its giving the same above  error and service cannot be rezched...BASIS is also workin on the same issue but getting ...
    Any help...
    Message was edited by: sreedhar Gunda

  • Internet Explorer cannot display the webpage error urgent!

    Hi,
    I have created a OAF page. am displaying some report data in the page. The VO query is executing more thatn 20 min to get the records after tuning.
    Now my problem is, am getting the error "Internet Explorer cannot display the webpage" in 10 mins after the VO query execution started. However, the DB session for this query is still executing at the backend and I am unable to get the same OAF page until the DB session completes.
    Could you please help me in this?
    Thanks,
    Raja.

    Raja,
    There are two options here :
    1) The correct one is to go via concurrent program , because as per web standards a web page should not take max of 3-4 minutes to render.
    2) If you still wanna go via your present approach, you need to set profile ICX:Session Timeout which specifies Maximum idle time for the Oracle Applications user session(specified in minutes).
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Portal Desktop & Display Rules - Not able to see the changes made.

    Hi All,
    I had created a new theme for the portal. I had also created the rule for the new desktop with the IF & THEN condition.
    IF user = KT1137
    THEN portal desktop = pcd....(full path)
    after that, when I am logging into the portal with the above given id, I am not able to view the changes.
    what could be the possible reason? Thanks.
    Regards
    Chander Kararia

    Hi,
    Make sure that there are no
    if *
    then
    conditions above your if condition.
    so that, your rule should look like this:
    if user=your user
    then desktop=your desktop
    if user=*
    then desktop=...;
    Regards,
    Srinivas

  • Reporting IAC - Internet Explorer cannot display the webpage error

    Hello
    We are working on ECC 6, EHP 3, MSS Reports using LaunchPad.
    When we try to see the report results, it gives us following error at below URL:
    http://domain.com:50000/irj/servlet/prt/portal/prteventname/navigate/prtroot/pcd!3aportal_content!2fevery_user!2fgeneral!2fdefaultDesktop!2fframeworkPages!2fframeworkpage!2fcom.sap.portal.innerpage!2fcom.sap.portal.contentarea?NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fcom.sap.pct%2Fline_manager%2Fcom.sap.pct.erp.mss.bp_folder%2Fcom.sap.pct.erp.mss.roles%2Fcom.sap.pct.erp.mss.manager_self_service%2Fcom.sap.pct.mss.hcm.rpt.iac&ApplicationParameter=S%3DMSS0%26F%3D*HISRETQTA++5%26B%3D20100329%26E%3D20100329%26V%5B1%5D%3DMSS_RPT_SEL_PD1%26OV%3DMSS_RPT_SEL_PD%26R%3D4365AF4B40472508E10000000A000326&CurrentWindowId=WID1269788098656&NavMode=1 
    Internet Explorer cannot display the webpage
    Most likely causes:
    You are not connected to the Internet.
    The website is encountering problems.
    There might be a typing error in the address.
    - I am connected to Net very well.
    - Not sure abt website problems
    - address shown in the address bar is mentioned above
    Any idea what is wrong? We were earlier getting IAC exception, and added the permissions to overcome it.
    Reagrds
    Yash

    HI Yash,
    Please follow this link http://help.sap.com/saphelp_erp2004/helpdata/en/0c/c28c4024d26e1de10000000a1550b0/frameset.htm.
    It will solve your problem. Also make sure that you will give READ access to the end user on this folder.
    In case you are still facing with issue, do let us know.
    Cheers,
    AB

  • WRT300N v1 Internet Explorer cannot display the webpage

    An intermittent problem occurs where occasionally during browsing the web I'll get an Internet Explorer "cannot display the webpage" and then I reload the page and often it works on the reload.  The problem is very frequent and so nearly every webpage I try to open I have to reload in order to access it. 
    A temporary fix is unplugging the WRT300N v1 and plugging it back in.  For a while, it works fine, but eventually the problem creeps up again.
    I have firmware v 1.03.3
    I've got two laptops, one Mac running OS 10.x and one Dell running Vista.  I also have a desktop PC running XP.  The two laptops use the wireless connection.  The PC uses a wired connection.  All 3 computers experience this same problem browsing web pages.
    I've  read the forums and mostly I've seen people talking about problems with the WRT300N v1 as far as the wireless connection, but this time I'm having issues even with the wired connection, so I feel that this issue isn't addressed, or at least I haven't found where it was addressed.
    How do I fix this issue permanently?

    I too am having the same problem. I used another system with IE7 installed and found that many sites that were "unable to be displayed" were accessed with IE7 on a differant computer system running Windows XP.
    I realize it could be a router thing as well....but after i went through all the tech help i could find online it still did not solve the problem. I decided to work it out myself.
    I found my solution when trying to go to sites with mp3 files on them.  Thats when i discovered that with Windows Vista I had to manually select what program applications would be used to perform IE7 features (webpage content) in order for the pages to load properly.
    To do this in Windows Vista - just go to Start / Program Defaults / Set Program Access and defaults  From there you can select which programs to open if IE7 cant handle the file extention on its on.  That was my problem all along.
    You may have to go as far as setting your file associations in Windows Explorer.  Windows Vista had set the file extension .php to open with Windows Photo Gallery.
    I am still going through all the file types and finding file extentions that are configured wrong within Windows Vista.
    UPDATE:  I had problems opening webpages from links from online searches that were within various forums and also on websites that required a login but popup a separate window to login to.  I don't know if you have the same problem with these sites.
    I uninstalled a Windows Update (kb927143) and can now access those.  I know this could be risky but I still have my firewall and antivirus running. Until IE7 is fixed its the only choice I have.
    To do this in Vista....go to Control Panel ... Programs and Features...then click view installed updates.  You will find it there if you have it installed.  From there you can uninstall it.
    Hope this helps you to solve your problem.
    Message Edited by nannahawktx on 08-27-2007 09:02 PM

  • Change Portal desktop dynamically

    Hello Praveen,
    This message is reference to the thread "Change Portal Desktop Based on Role" . If you remeber initially I could not able to find the setRuntimeDesktop method.
    Now I am running my code in SP14 (different environment) its working fine.
    IVIEW preview is working fine and setRuntimeDesktop() also setting the desktop at runtime. Could you please tell me where should I place this IView and where to subscribe event to run this IVIEW
    that can change the desktop only at TLN event but not for sub nodes (detail navigation).
    Thanks

    Hi,
    Can I suggest you run http trace and inspect the logs as this will identify what code is fired when you fire events in the page.
    It is difficuilt for me to assist you because I cannot see the way the code is being executed.
    Further to the portal content area (com.sap.portal.contentarea). If you see the following docs try set the target to reference the content area defiend in your framework page (you may be using a custom framework page).  You should be in a position to query the object name defined for the content area defined in your framework page.
    Portal Content Area is not displaying.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d2aeb9-5f92-2d10-d38d-ded09c94330d?QuickLink=index&overridelayout=true
    Conceptually the principals are the same I believe.
    Let me know how it goes.
    Just another thought:
    Check if you need to "wait" for the content area to load before applying the event - the iView needs to serve the content within before the them is applied. Check the iview attributes too, if they are cached then the content area will not be updated till the next refresh potentially
    Edited by: Basis Team on Dec 23, 2010 7:40 AM

  • Error message "This program cannot display the webpage when uploading images to Cafe Press

    I have had a Café Press shop for five years and except for sometimes being slow, no problems uploading images. Now, suddenly for 3 days I get the message "This program cannot display the webpage
    Most likely causes:
    • You are not connected to the Internet.
    • The website is encountering problems.
    • There might be a typing error in the address.
    What you can try:
    Check your Internet connection. Try visiting another website to make sure you are connected.
    Retype the address."
    I got the messsage about half way through the uploading of an image. People suggested using "firefox" instead of IE so I now get a similar error message from Firefox. I signed in, clicked on the image I wanted to upload and hit "upload" and get message as follows:
    Server not found
    Firefox can't find the server at members.cafepress.com.
    * Check the address for typing errors such as
    ww.example.com instead of
    [url=http://www.example.com]www.example.com[/url]
    * If you are unable to load any pages, check your computer's network connection.
    * If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
    None of this makes sense because I WAS connected to the internet (obviously) or I wouldn't have been able to sign in, go to my media basket, browse for the image and click "upload" and watch as the progress bar showed percentage of upload such as 20%, etc. and even went to 100% at times before giving me the error message. Plus I couldn't make a typing error since I wasn't typing anything but uploading an image. Any suggestions?
    Whatever your suggestion, I need step by step instructions as I am totally computer illiterate. I don't even know what a "proxy" is and don't know if I have a "firewall" as the message suggests. I have "Comodo" security and am using Windows XP.
    I contacted CP which was no help at all. All they did was tell me to clear my cache which I do after every session. Thanks
    Nancy
    http://www.cafepress.com/calendarflr

    Sounds like your desktop application is in fact running from
    a server. CHMs were identified as a security risk by Microsoft and
    are best suited to the user's PC.
    Click
    here for more information.

  • Web Dynpro Java - Light Portal Desktop

    Hi Guys... I have a web dynpro java application that I want to display on a Light Portal Desktop, but when I display the iview... it gets cut. I mean I can see only part of my application and there is also a right scroll bar... It looks like the height size of the iview is set to "FIXED" but it's not. I Actually  modifed all values for size even on the Light Framework Page used...to FULL_SCREEN. I don't know what's wrong. If I display the same iview using a Default Framework Page it looks fine... I'm using SAP EP 7.00 SP 16.
    Is there any restriction for using Web Dynpro iviews for Light Porta Desktops?
    Thank you.
    David

    David,
    Webdynpro content is considered heavy and I dont think we can use it in LPD.
    Update:
    Note 916545 - Central Note for External-Facing Portal (NW 7.0)
    Check under application.
    Regards,
    Sandeep Tudumu
    Edited by: Sandeep Tudumu on Sep 17, 2008 8:56 PM

  • Runtime error while creating a Portal Desktop

    Hello *,
    I want to create a New Portal Desktop in System Administration > Portal display > Desktops & Display Rules (EP7 SP14).
    The Portal Content editor is correctly showed when I create de Desktop in the Portal Content folder, BUT, a run time error is showed when I try to do the same under a "New Folder" under the Portal Content Folder.
    I am working with Administrator user and the permissions have been defined as follows:
    Portal Content
    content_admin_role Full Control End User Role Assigner
    Everyone Read End User Role Assigner
    super_admin_role  Owner User Role Assigner
    system_admin_role Owner User Role Assigner
    New Folder
    content_admin_role Full Control End User Role Assigner
    Everyone None End User Role Assigner
    super_admin_role  Owner User Role Assigner
    system_admin_role Owner User Role Assigner
    Helpful answers will be rewarded
    Thanks
    Marta.

    What do you mean by a prefix here?
    For me the theme implementation is not working either way
    - I am not able to create a new desktop (some SAP Error)
    - Copying the default desktop into my folder and doing the required changes there.
                      changed the name/id/theme/default framework page
    but when i apply it to a user, doesnt show up.

  • Cannot display the screen of the macbook on TV. OS is Lion 10.7.2. Connection to the TV is over HDMI cable.  TV shows only the backgroud picture of Lion. Do you have any suggestions for help ?

    Cannot display the screen of my macbook on TV. OS is Lion 10.7.2. The Macbook is connected to the TV is over HDMI cable.  TV shows only the backgroud picture of the Lion OS and reacts even to mission control. Do you have any suggestions for help ?

    You have the display set in Extended Desktop mode. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
    Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.

Maybe you are looking for