[urgent] using a mask to put to pictures one other the other

Hi
I have two images: the first is the original, the second is blurred to remove the halos around the over-sharpened edges.
Having the following mask, I would like to put the two images ons over the other. The original picture should appear in the black area and the blurred picture should appear white (transparent) area. Please click on the picture, else the white areas aren't visible.
How to do this with photoshop CS4?
I tried this but I find now way to put the mask in the same layer as the second picture.. I can only add it in a third layer.
Thank you in advance for any advices.

This picture is part of a video indeed.. I would like to do the superposition for each frame of the video.. by scripting.

Similar Messages

  • Editing pictures from a file one after the other

    I am not sure pow to ask the question. I just upgraded to Photoshop 10 from 3.  Now, when I am editing a few days worth of pictures one after the other, I go to open the next file (picture) the computer takes me back to the top (first one listed) each time.  Many times I am editing over 100 pictures in the file, and now have to scroll down each time and that takes forever. I have to remember what number picture I was on.  In my earlier version, the compiter "held" the spot where I was so  it was easy to select trhe next picture to edit.  Any words of wisdom to make this work lije it did earlier?  THANKS.
    Dick [email protected]

    Hi ,
    If you are talking about the issue related to Opening File Browser of PSE Editor File menu >> Open.
    Please USE organizer.
    First import all your images of that particular folder to your catalog and then intiitalte your workflow from Organizer to edit them in the Editor.
    Organizer scolling bar will not move after editing by PSE Editor.

  • I use an iphone 3gs can i set one of the song as ring tone or i will only be able to use the inbuilt ringtones?

    i use an iphone 3gs can i set one of the song as ring tone or i will only be able to use the inbuilt ringtones?

    yes you can
    A. how to make a ringtone using iTunes
    First, open up iTunes in order to make a ringtone using iTunes. Find the song you want to turn into a ringtone by browsing through your music library.
    Next, find exactly what part of the song you want to make a ringtone using iTunes. For example, if you want to use a specific section of the song from 21 seconds to 40 seconds, make a note of where you want the ringtone to begin and end.
    Now, right click on the song you want to turn into a ringtone. Click "Get Info". Now, in order to make a ringtone using iTunes, click the "Options" tab.
    Check the "Start Time" check box. Type in the point in the song where you want the ringtone to start in the format "minute:seconds" (e.g. the second mark would be 0:20). You can also be more precise by adding a period and putting milliseconds in after that (e.g. 0:20.150, would be 20.150 seconds). Also, click the "Stop Time" check box and enter where you would like the ring tone to end. Keep in mind ringtones can only be around 39 seconds maximum. Press "Ok". We are almost done making a ringtone in iTunes
    Now, right click on the same song. Select "Convert AAC Version". If it is in another file format, you can go to "Edit" then "Preferences" and under the "General" tab click "Import Settings"; change the file format to AAC. After you select "Convert AAC Version" a new file will be created, but it will only be the segment of the song that you specified earlier.
    Now, you have to find the file you just created. Right click on the new, shorter song and select "Open in Windows Explorer". The file extension should be .m4a. Rename the extension to .m4r by right clicking the file and selecting "Rename".
    Now you can delete the shortened version of the song in your iTunes library. Then, double click the .m4r file and it will loaded into your iTunes Ringtone list. Now you can make a ringtone using iTunes!

  • Is it possible to use booleans to build a VI that uses buttons to switch between screens (3 only) while the other screens disappear?

    As a beginner, I need help figuring out how to build a simply VI that uses boolean logic to switch between three different screens. I need a "Home" screen, the next screen which has a button to go back "Home" and a third screen which has two buttons to go "Home" and "Previous Screen". Can someone help me with a simple block diagram?

    Hi,
    Or put the data in three tab controls. The tabs itself are hidden. The
    program switches between the tab sheet if one of the buttons is pressed.
    The buttons are best not copied, e.g. the same buttons are used in every tab
    sheet (buttons hover above the tab, a black shadow will apear). If the first
    sheet is shown, button 2 and 3 are hidden, sheet two: only button 3 is
    hidden, sheet three no button is hidden.
    Showing the tabs allows the user to choose the views directlly. The button
    logic is not needed anymore. But you'll have to live with a simple tab
    sheet, instead of a fancy button system!
    Regards,
    Wiebe.
    "Jason R" wrote in message
    news:[email protected]...
    > Another solution if you want to avoid property-node hell...
    >
    > Divide your screen into 1/4ths. That is, make your FP 4x larger than
    > your desktop.
    >
    > Place screen 1 on the upper left quadrant.
    > Place screen 2 on the upper right quadrant.
    > Place screen 3 on the lower left quadrant.
    > Screen 4 (lower right quadrant) is unused.
    >
    > Disable the ability to scroll at run time.
    >
    > As the user clicks buttons, use the properties of this vi to move what
    > the user can see on the front panel.
    >
    > Cheating? yep. Easier? yep.
    >
    > Hope this helps! =)
    >
    > btw - be sure not to update the FP controls when they are not visible,
    > or this will eat processor cycles.
    >
    > Sincerely,
    > Jason G Richmond
    > Project Engineer II and LVAAD Instructor
    > VI Engineering
    > [email protected] (domain should be vieng.com (no A's))
    >
    >
    > missileman wrote:
    > > Is it possible to use booleans to build a VI that uses buttons to
    > > switch between screens (3 only) while the other screens disappear?
    > >
    > > As a beginner, I need help figuring out how to build a simply VI that
    > > uses boolean logic to switch between three different screens. I need a
    > > "Home" screen, the next screen which has a button to go back "Home"
    > > and a third screen which has two buttons to go "Home" and "Previous
    > > Screen". Can someone help me with a simple block diagram?
    >
    >

  • HT4847 i have 5gb of icloud storage, used 2.5gb but it wont let me unlock the other 2.5gb of storage. How can i use the remainig 2.5gb of storage?

    i have 5gb of icloud storage, used 2.5gb but it wont let me unlock the other 2.5gb of storage. How can i use the remainig 2.5gb of storage?

    I got rid of AMDS, ASU ,QuickTime and iTunes from control ones I also found folder in Vista with D:\Users\Rick\Music\iTunes\Previous iTunes Library and there is one dated 2009-03012.itl. I moved this file up one folder and delted existing iTunes Library.itl. iTune still failed to identify my iPhone. There are other files iTunes Library Extras.itdb, iTunes Library Geniyes,itdn and iTunes Music Library,xml date dtd 06/18/2009 after upgrade except the latter which is date 06/23/2009. So something is not allowing me to pull or put everything back to when it worked.
    YES this is my only iPhone and only PC I have access to with iTunes.
    Here is what Apple gave to someone Sunday 28 June:
    http://discussions.apple.com/thread.jspa?threadID=2035950&start=75&tstart=0
    I checked these out too and they appear the same printed out nearly a week prior. I agree with Coach TO, if I had bad drivers or Vista errors it would not have shown up only when I updated to latest Version of 8.2.023. My Phone was identified on a PC with iTunes at the local AT&T store. He suggested I get phone into Recovery made while connected to iTunes and that resolves the problem 9 out of 10 time. Weak spot was he tried to get phone into Recovery without iTunes connection and thought I may have iPhone problem, then changed his mind when it worked while connected. He also stated it could take an hour. I have not tried to put my iPhone in Recovery lately, I think I did a while back and it failed to go into Recovery as error "iPhone detected by, not identified..."Has anyone tried forcing phone into Recovery? I understand you may lose all that is on phone. If iTunes still fails to identify would we not be in worse shape even if iTunes holds a recent backup which it does not for many of us? Will Apple take back or exchange phone if yours is not identitifed, AT&T today told me I had to go to Apple Store for this or anything to happen.

  • TS3367 Using FaceTime between 2 iPhone 4s I can hear the other person but we only see ourselves, how do we see the other person

    Using FaceTime between 2 iPhone 4s I can hear the other person but we only see ourselves, how do we see the other person

    Once the connection is made you should automatically see the other person full screen, with a small inset picture of yourself.  Normally you only see yourself full screen after you initiate the call prior to the other person accepting it.  Are you both connected to wi-fi and are you initiating the call by tapping the FaceTime button on the other person's contact?

  • Using multi-displays in Mavericks, when I switch workspace on one screen the others also switch

    I am a programmer and I use a lot of different workspaces and 1-2 extra displays. When I switch workspaces on one display the other also move, and if I put a program to fullscreen the other displays become blank and unuseable. It messes up my workflow and is extremely annoying.
    When Mavericks first came out it wasn't like this but after last update it changed again.
    Any suggestion is appreciated.

    Thanks a lot! The settings just reset after update, I feel really stupid right now but also relieved

  • How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.

    how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.  From systems Preferences I must select one or the other.  I want both to work all the time.

    Hi,
    I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
    1. DS: 0FI_AP_4  replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
    2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
    3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
    4. Load the same to a InfoCube (0FIAP_C03).
    Hope this helps.
    Thanks.
    Nazeer

  • HT5622 facetime not connecting to all devices that use the same apple id.  I have both an iphone and ipad.  Incomin facetime calls connect randomly to one or the other or both.  (should be coming to both)

    I have an iPad and an iPhone, both registered to same AppleID.  Incoming Face time calls ring randomly on one or the other or both (and sometimes none). They should ring on both.

    check the 'recieve at' addresses you set in settings, facetime.  you can have multiple addresses. 
    On mine, i have thre addresses set the same.  I am using both a phone # and my e mail address  (neither one is my apple ID, by the way).
    If somebody calls me to FT using the phone #, the phone rings first, followed by the pad, about 10 sec later.  If they call using the e mail address, they both ring at about the same time.  If one or the other answers, the other device stops ringing. 
    So next time a call comes, wait a bit before answering to see if the other device responds.  and check your receive at addresses.  
    You might want to test a little - have somebody call using one address, or the other, and see if you can track the behavior.

  • I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I assume these are POP accounts and all computers are set to remove from Server after downloading.
    So on the non dominant ones... Mail Preferences>Accounts, highlight an account, Advanced tab, uncheck remove from Server, just have the main dominant one remove from server.
    Or get/setup IMAP accounts.

  • I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same displa

    I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?

    More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed

  • Can i use a 2010 24 led screen with one of the new 2012 macs with thunderbolt technology?

    can i use a 2010 24 led screen with one of the new 2012 macs with thunderbolt technology?

    Yes. Any standalone display which can be connected to a Mini DisplayPort, with or without an adapter, can be plugged into a Thunderbolt port without any additional adapters.
    (65766)

  • I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is t

    I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is that done? The MacBook Pro could even be a center channel if configured in that order.

    See the following thread on the same topic:
    2 Thunderbolt displays   MBP = sound coming from both displays?

  • Gendata error when using MessageFromExtr rule on a field in one of the FAP

    This is the error:
    Error in RULLoadFASR(): Unable to locate Form Grouping identified by <;;;;>.
    Tip: At least one Group (GRP) in the BDF needs to reference a Group1;Group2;Group3 value of <;;;;>.
    There are also other errors. But this was the first.
    While Gentran runs very fine, gendata gives errors. To say this happens only while using MessageFromExtr rule on a field in one of the FAP. The same BDF file works good when I use Move_it or some other rule.
    The .FAP file looks like this for only the field maapings. Using Studio Version of Oracle Documaker Studio.
    A,F8," ",N,N,N,N,;;,"MESSAGEFROMEXTR","ABCD","",;;,50,0,0,30,581,0,15,0\TBLOFF,XYZYX
    Any Help??

    The Key1 and Key2 table are already updated. This happens when using MessageFromExtr rule.
    Also, in the extract file I am having some value in the tag "<J:L>TextMessage". As this rule supports <J:L> it should print teh text message on the field, but it gives error unable to retrieve record and other.

  • I am doing two calendars.  In one I am able to load 7 pictures, but in the other I can only load 5, my settings are set exactly the same for both.

    I am doing two calendars.  In one I am able to load 7 pictures, but in the other I am only aloud to load 5,  My settings are set exactly the same for both.
    Any ideas?

    What happens when you try to load the photos into the second calendar?  What iPhoto version?  What system version?
    OT

Maybe you are looking for