Urgent!!Virtual Char & KF using customer exit!!

Hi
Anyone explain me in easier way the steps for Virtual char & KF & where we use it??H to use it with the help of customer exit & why??
Pls xplain me .
thnx
raj.

Hi,
A virtual characteristic / key figure can be used to derive values at
query run time
The virtual characteristic / key figure must be added to the cube as a
characteristic or key figure but not filled in update rules or transfer
rules
Useful for determining values that are not known or determined until
query runtime
You will find the Doumentation and Example in SMOD for Virtual Characterstics and Keyfigures.
for Documentation and Example.
Goto Tcode SMOD -> Enter Enhancement as RSR00002 ,Select the Radio button Documentation -> Click on Display
check the thread for more info...
what are Virtual Chars & KFs
virtual char and keyfig

Similar Messages

How to get data for current week and previous week using customer exit in Bex.

Hi everyone,
I have a scenario in which I need to display data for current week and previous week (based on "sy_datum" the program has to calculate current week and previous week) in Bex using Customer exit. I have created one variable in Bex Query Designer and I have written code for the variable in CMOD. But it is not working fine, (I know that we can do the same by using offset value in Bex). Can some one guide me how to achieve my requirement using customer exit.
Thanks in Advance,
G S Ramanjaneyulu.

Hi krishna,
Thanks for your quick reply, can you have a look at my code,
case i_vnam.
WHEN 'ZPWK_CWK'.
ranges : pre_week for sy-datum.
data : start_date type DATS,
       end_date TYPE dats .
************FM TO GET FIRST DATE OF CURRENT WEEK ************************
CALL FUNCTION 'BWSO_DATE_GET_FIRST_WEEKDAY'
EXPORTING
    DATE_IN = sy-datum
IMPORTING
    DATE_OUT = start_date.   " WEEK FIRST DATE
end_date = START_DATE + 6.   " WEEK LAST DATE
END_DATE   = START_DATE - 1.   " PREVIOUS WEEK END DATE
START_DATE = START_DATE - 7.   " PREVIOUS WEEK START DATE
**********PREVIOUS WEEK DATES IN PRE_WEEK******************
pre_week-SIGN   = 'I'.
pre_week-option = 'BT'.
pre_week-LOW    = START_DATE.
pre_week-HIGH   = END_DATE.
APPEND pre_week.
CLEAR : START_DATE,END_DATE.
endcase.
Regards,
G S Ramanjaneyulu.

Count the number of days in the selected range using Customer exit

Hi Experts,
we have requirment where user is asking to add a column to report, which will have 'count of days for which key figure is having values' for each of the months and the Header would be 'Day Count'
Please let me know if its possible using Customer exit?

Hi,
In our report we have two characteristics site no. and product and we have 6 key figures of type quantity and Input for the report is Fiscal year/period
So in the report Key figures are populated with values for respective site no. and product combination
Now the user wants new column in report which will have header u2018Day countu2019 and it should Simply count the number of days in the selected range that have a volume different than 0 for key figure
Please let me know if more details are required

Crystal Reports with BEx Query using Custom Exit Variable

Hi,
We have BW BEx Query using Customer User Exit variable to derive the Fiscal Week for Last Year (called it VAR2) based on another user input variable Current Fiscal Week (called it VAR1).
VAR2 is derived from VAR1 in CMOD via some codings and thus it DOES NOT have the "Variable is Ready for Input" flag ticked in the BEx. VAR1 is user input variable, so it has "Variable is Ready for Input" flag ticked in the BEx.
When we create a Crystal Reports with the BEx Query using variable VAR2, and when we run it we got an error message saying "Failed to execute query; '[]<java.lang.UnsupportedOperationException: No Selection State Support!ZP_MI_LYPUBWEEK>'. Redesign your query or contact the data source maintainer to solve the problem". (note: ZP_MI_LYPUBWEEK is VAR2 in this case).
Could anyone please assist? Surely, CR supports BEx customer user exit variables like the above, right?. I also refer to the forum below as it seems to have a similar issue (except mine with an error message), but it does not provide a solution in it.
Crystal Reports with BEx Query using Custom Exit Variable
Thanks,
Andy

Hi Vibhav,
We have the SAP Crystal Reports for Enterprise XI4.0 Version 14.0.0. Not sure if SP0 or other SP, got to check with Basis Team later.
We tried that "mandatory" option and did not work either.
Anyway, SAP has now come back again saying it is something they will fix it in next release/version. We got a phone call from them and a reply below to our OSS.
23.08.2011 - 08:20:49 CET - Info for Customer by SAP
I have raised this issue on the Idea#s Place as an enhancement request
on the below link:
https://cw.sdn.sap.com/cw/ideas/5586
This ER contains the information of including the customer exit
variables in the report without checking the #input for ready# option.
This ER can be considered for being implemented in the future
versions. You can refer to SAP Note: 1515837 - How To: Enhancement
Request Process - "Idea Place" for more information regarding the Idea
Place.
Cheers,
Andy

Bex Formula using customer Exit

Dear Friends,
I am trying to resolve the below problem. Require your help.
In one of the bex reports, the requirement is to provide a variable on Bill date. From the given bill date, the report should display data for 7 consecutive days.
But the condition is that the from date should always be a saturday?
What i have done is : In ROWS, i selected the required key figure columns
and then, created a structure in which i created Seven New Selections and used offsets.
so, if the user enters a specific date, the report displays seven days of the data from the given date. However, how do i restrict the user's choice to only saturdays.
I suppose the solution lies in using customer Exit.. but could some one help me with the ABAP coding.
I am also available on [email protected]
Thanks for the anticipated support.

Hi,
You can get the Day from the current system date and put a case statement to substract 1 for sunday to get saturday
2 for monday
3 for tuesday
etc
Fuction Module : DATE_TO_DAY
Can check this link : FM: DATE_TO_DAY

Text Variable using Customer Exit .

Hello Friends. I have a requirement to create Text Variable using Customer Exit . So I created the Text Variable as "ZVRBMS" and assigned that with YTD &ZVRBMS& in the Structure of Query Desigener . so that Out put will YTD AUTO
OR YTD RETAIL
Now this Auto And Retail comes from Version that user choose via variable ZFIBMSVER IN User Promt. if ZFIBMSVER = 10
then ZVRBMS = auto . and if ZFIBMSVER = 20
then ZVRBMS = RETAIL
Please correct my ABAP code in customer exit and let me know to make this work
when 'ZVRBMS'.
    if I_STEP = 2.
      clear LOC_VAR_RANGE.
      loop at I_T_VAR_RANGE into LOC_VAR_RANGE.
        if LOC_VAR_RANGE-VNAM = 'ZFIBMSVER'.
      if SY-SUBRC = 0 OR LOC_VAR_RANGE-LOW = '10'.
        L_S_RANGE-LOW = 'AUTO'.
      elseif LOC_VAR_RANGE-LOW = '20'.
        L_S_RANGE-LOW = 'RETAIL'.
      L_S_RANGE-SIGN ='I'.
      L_S_RANGE-OPT = 'EQ'.
      append L_S_RANGE to E_T_RANGE.
endif.
endif.
exit.
      endloop.
endif.
Thanks
Soniya

The code should be:
when 'ZVRBMS'.
if I_STEP = 2.
clear LOC_VAR_RANGE.
loop at I_T_VAR_RANGE into LOC_VAR_RANGE.
if LOC_VAR_RANGE-VNAM = 'ZFIBMSVER'.
if LOC_VAR_RANGE-LOW = '10'.
L_S_RANGE-LOW = 'AUTO'.
elseif LOC_VAR_RANGE-LOW = '20'.
L_S_RANGE-LOW = 'RETAIL'.
endif.
L_S_RANGE-SIGN ='I'.
L_S_RANGE-OPT = 'EQ'.
append L_S_RANGE to E_T_RANGE.
endif.
exit.
endloop.
endif.

BW reporting authorisation using customer exit

Hi,
We are planning to implement BW reporting authorisations using customer exit, so that authorisations can be filled at the run time, this is to avoid maintaining huge number of authorisations.
If any one has implemented this before, Please send me some documentation for the same. We have BW 3.50 environmnet.
Regd,

Hi Anil,
What kind of authorization do you need for your BPS layout? Please explain this requirement further and I will try to help.
Your second question is quite good, where do I find the values to fill the user exit too do authorization correctly for each user, right?
I think this depends heavily on your source system, but a good approach (if possible) is to compare the master data available in the BW system to the logged on user in the system. If not, you will have to maintain data, i.e. in an ODS (like you suggest) in order to have something to work with in the CMOD exit.
For instance, consider this simple scenario (we can discuss it further if you give more details on your scenario and requirements):
User ABC belongs to plant 10. User DEF belongs to plant 20. You have an ODS with mapping between usernames and plants.
<pseudo code>
In CMOD:
data: lv_user(8) type c.
data: lv_plant(10) type i.
lv_user = sy-uname. "this will give you user's login id
select single plant into lv_plant from <your ODS>
where ods_userid eq lv_user.
L_S_RANGE-LOW = lv_plant.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
User ABC will see plant 10 and user DEF will see plant 20.
Do you have any master data (i.e. 0username) available to map between username and an user number (such as business partner)?
Hope this helps,
Petter

What are the commonly used customer exits ?

what are the commonly used customer exits in realtime with regard to the modules MM, SD, PP?

SD - MV45AFZZ

Can u please help in getting this report "using customer exit."....

Hi friends.
can any body pls suggest how this report lay out could be formed.
when you enter in selection as 0CALMONTH = Nov 2007.
The report should give the values of a K.F (return rate), in the following manner .
july july-aug july - sep july - oct july - nov.
i.e it should always give the values of that K.F starting from july , then july -aug , then july-sep , july-oct and july -nov ..(it shld show the cumulated values starting from july )
The fiscal year always starts from july and ends with june .
say if you give 0calmonth = FEB 2007, THEN THE TREPORT SHOULD FETCH TE VALUES
july2006 july -aug july-sep july -oct jul- nov july- dec jul - jan2007 july2006 - feb 2007
can you plesae tell me in detail how to this . if we have to use CUSTOMER EXIT ,pls give me the code how to do this. your answers will be suitably rewarded.

Hi,
Try using offset varaiable of calmonth.
Regards
siva

How to use customer exit variable in the report

Dear All,
i want to use a standard customer exit variable in the report properties.
In the Bex Query Designer right hand bottom you will find two buttons "Properties" and "Task". Click on task you will get different option. Choose properties from there and then select "variable sequence tab".
I need to add a standard variable there. How can i achieve it?
Appreciate your early help.

You need to add variable to corresponding charctertic then you can get that varaible for sorting the sequence....
If 0CUST is the varaible then you need to assign it 0CUSTOMER then 0CUST will be available for the sequence.
Edited by: shanthi bhaskar on Apr 2, 2009 5:41 PM

Issue with Variables using Customer Exit.

Dear All,
I have the following scenario,
I the Variable Screen I have 4 variables, lets say for eg: Plant, Material, Material Group, Calendar Day.
Then I have 4 Customer Exit Variables in the report, 2 of type Char Value Variables and 2 of type Text Variables.
I have written the customer exit code and all the 4 customer exit variables derive their values from the Calendar Day Variable from Variable Screen.
In the Variable screen if i give the values only for the variable calendar the report executes fine.
But along with Calendar Day If I enter values for any other variable the report gives the following error message - "No value could be determined for variable VAR_CALDAY_CEXIT_1." VAR_CALDAY_CEXIT_1 is the name of my one of the Customer Exit Variables.
Please let me know how to solve this problem.
Cheers,
Neel.

IF i_step = 2.
CASE i_vnam.
       WHEN 'VAR_CALDAY_CEXIT_1'.
       LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'VAR_CALDAY_MULSIN_MAN'.
         CLEAR L_S_RANGE.
         IF SY-TABIX = 1.
         L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
         L_S_RANGE-SIGN = 'I'.
         L_S_RANGE-OPT = 'EQ'.
       APPEND L_S_RANGE TO E_T_RANGE.
       ENDIF.
       ENDLOOP.
       WHEN 'VAR_CALDAY_TEXT_CEXIT_1'.
       LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'VAR_CALDAY_MULSIN_MAN'.
         CLEAR L_S_RANGE.
         IF SY-TABIX = 1.
         L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
         L_S_RANGE-SIGN = 'I'.
         L_S_RANGE-OPT = 'EQ'.
       APPEND L_S_RANGE TO E_T_RANGE.
       ENDIF.
       ENDLOOP.
        WHEN 'VAR_CALDAY_CEXIT_2'.
        LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'VAR_CALDAY_MULSIN_MAN'.
         CLEAR L_S_RANGE.
         IF SY-TABIX = 2.
         L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
         L_S_RANGE-SIGN = 'I'.
         L_S_RANGE-OPT = 'EQ'.
       APPEND L_S_RANGE TO E_T_RANGE.
       ENDIF.
       ENDLOOP.
       WHEN 'VAR_CALDAY_TEXT_CEXIT_2'.
       LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'VAR_CALDAY_MULSIN_MAN'.
         CLEAR L_S_RANGE.
         IF SY-TABIX = 2.
         L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
         L_S_RANGE-SIGN = 'I'.
         L_S_RANGE-OPT = 'EQ'.
       APPEND L_S_RANGE TO E_T_RANGE.
       ENDIF.
       ENDLOOP.
ENDCASE.
ENDIF.
'VAR_CALDAY_MULSIN_MAN' is the Calenday Day Variable from the Variable Screen.
It is of type multiple single values.
The User enters two dates and then the code is utilized to pass these 2 dates to 2 Char Value Variables and 2 Text Variables.
Once again, if i do not enter the values for any other variable then the report executes fine.
Cheers,
Neel.

Query row structure to restrict on multiple ranges of Calendar Year /Month using Custom exit

Hi All,
I have written 2 queries in Bex 7.x which have similar requirement. One uses 0CALMONTH and other 0FISCPER. I will describe scenario with Calendar Year month query.
Query to have user entry screen for 0CALMONTH. Added 0CALMONTH in Filters section and restricted on mandatory user entry variable.
Key figures restricted in four ways by creating a row structure with four selections
Current Month User entered value on selection screen (Restricted on User entry variable)
Previous Month / Period (Above value offset -1)
YTD value Range from Previous July / 07.YYYY to current user entered month value (Custom exit)
LYTD value - Above value for previous year (Above value offset -12)
For YTD value wrote a custom exit code which uses the user entry variable on 0CALMONTH to retrieve the current month value and then give output range value for YTD.
The custom exit code when debugged seems to calculate the correct range. However the query output is not working and gives out the same data for Current month and YTD range. Also LYTD value and Previous month value don't show up with any data at all.
Any tips on where we are going wrong would be helpful.
Thanks!
Custom Exit code:
WHEN 'ZGB_FP_AYTD_PTNR'.
     IF i_step EQ '2'.
       READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'ZFP_AYTD_PRTNR'
                                                            iobjnm = '0CALMONTH'.
       IF sy-subrc EQ 0.
         CLEAR: l_month_curr, l_month_low, l_year_curr, l_year_low,
                l_calmonth_low, l_calmonth_high.
         l_month_curr = loc_var_range-low+4(3).
         l_year_curr = loc_var_range-low+0(4).
         l_month_low = 001.
         l_year_low = l_year_curr.
         CONCATENATE l_year_low l_month_low INTO l_calmonth_low.
         CONCATENATE l_year_curr l_month_curr INTO l_calmonth_high.
         l_s_range-low = l_calmonth_low.
         l_s_range-high = l_calmonth_high.
         l_s_range-sign = 'I'.
         l_s_range-opt = 'BT'.
         APPEND l_s_range TO e_t_range.
       ENDIF.
     ENDIF.

Hi
try this code
WHEN '0CALMONTH'.
CLEAR: l_month_curr, l_month_low, l_year_curr, l_year_low,
                l_calmonth_low, l_calmonth_high.
     IF i_step EQ '2'.
loop at i_t_var_range INTO loc_var_range where vnam = 'ZFP_AYTD_PRTNR'.
         l_month_curr = loc_var_range-low+4(2).
         l_year_curr = loc_var_range-low+0(4).
         concatinate '0' l_month_curr into l_month_low.
         CONCATENATE l_year_low '001' INTO l_calmonth_low.
         CONCATENATE l_year_curr l_month_low INTO l_calmonth_high.
         l_s_range-low = l_calmonth_low.
         l_s_range-high = l_calmonth_high.
         l_s_range-sign = 'I'.
         l_s_range-opt = 'BT'.
         APPEND l_s_range TO e_t_range.
       endloop.
     ENDIF.
This code used for calculate fiscal period interval from your input month.
For Ex
user input is 05.2014
customer exit result as 001.2014 - 005.2014.
Note: Fiscal year period is Jan - Dec otherwise need to convert the input month details.
Regards
Sureshkumar

Authorisation variable using customer exit

Hi,
how to populate a authorisation object at runtime? is it possible to have a variable etc that can be populated a runtime?
I have a object zsales_off which has different values for different users. i need to create separate roles just to have different values for sales office for different users. i would like to avoid this by having a single role with the zsales_off getting populated at runtime.
please give details steps with code if possible?
i have created the authorisation variable and am using it in the query. if i manually assign values for sales office in the role, it is working fine.
i want to assign values at run time. i am confused with the process as such.
few specific doubts like:
1> the variable should be of "authorisation" processing type or "customer exit" processing type.
2>what to use I_step=0 or I_step =1? how to use? where to use?
3>to write a abap code or use a func module, which one? how to use.
4> what(value) to assign for the zsales_off object in the authorisation profile?
thank u in advance..

Hi torsten,
thank you. but i am afraid it doesn't give me an idea as to how to move ahead?
i have variable with processing type "authorisation" used in many queries.
can i use the customer exit rsr0001 for this variable? what value should be assigned in the authorisatio profile for this object?
please give the detail process and a abap code if possible.
thank u

Restricting Charecterstic using customer Exit variable

Hi Experts,
Please adivise how can I restrict values of a charectersitc Infoobject using a customer exit variable.
I have a InfoProvider which has a authorisation values from which I have to retrieve the authorisation values.
Regards,
Koka.

Thanks for the reply Bhawani, I have a function module to fill the Customer exit variable with the values retrieved from DSO.
Can you please explain me the second step mentioned or can I direclty call my FM in the Include ZXRSRU01..
WHEN 'XXXX '. ( customer Exit varaiable)
      CALL FUNCTION 'ZBI_LOAD_AUTH'
        EXPORTING
          I_AUTHVALTYPE = 'auth value'
        TABLES
          E_T_RANGE     = E_T_RANGE.
Regards,
Koka.

Using Customer Exit of an iView

Hi
I want to pass a dynamic custom parameter to my webdynpro ABAP component
which is shown in portal as com.sap.appintegrator.sap iView.
I have created a portal service which implements ICustomerParameterProvider interface.
i have overridden the method getParameter(IPortalComponentRequest req, String id){}
in this method i returned the value (hard code)to that parameter, My WebDynpro ABAP Applicaiton gets that value, working fine...
Now..my question
1. IPortalComponentRequest is the same object for all the iViews of a single browser instance?
if Yes, i have created a JspDynPage where i have put a value using
IPortalComponentRequest.getNode().putValue( "param","value");
Now can i get this value in my getParameter methods argument IPortalComponentRequest?
I have tried this not working.. so what is the use of the passed argument IPortalComponentRequest.
Hope the thing is clear...
correct answer get rewarded
Thanks & Regards
Abhimanyu L

Hi,
Check this to know about Data Storing & Retrieving in the Portal:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a0/3b7f41009d020de10000000a1550b0/frameset.htm
Both approches to store datas in IPortalComponentSession and Node will not pass the data to other Components in the same request.
EP7 cannot depricate ServletRequest and HTTPSession as they are part of standard J2EE API on which EP7 builds.
So use, either:
request.getServletRequest().getAttribute()
request.getServletRequest().setAttribute()
or
session.getHttpSession().getValue()
session.getHttpSession().putValue()
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

Urgent!!Virtual Char & KF using customer exit!!

Similar Messages

Maybe you are looking for