Urgent,voice card problem

. hi all,
my friend have bought iphone 5s 32 gb from london for me. but my phone is problem either screen or voice card. How can ı use international guaranty?
best regards
my phone
Model: ME437B/A
Serian Number: DNPLK8XYFFGG
IMEI:35 876105 156176 4
ICC ID: 8990 0112 0714 0004 864
Taner BADEM

If you lost your memory card password, it is not possible to recover data on it.
But atleast you can save your memory card by using a trick.
Just insert your memory card into a smartphone like Nokia E66 which i have tried.
Now try to format, and it works without need of your forgotten password.
You know what
these Smartphone won't ask for password
Please click on Kudo button if my post helped to save your memory card.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Similar Messages

Router 2911 with voice card VIC3-E/M VOIP Problem

hi All
I want to ask if any of you have any experience like this. I have deployed a new Cisco router (model 2911) in my client. The previous router they used is 2811. After deployement, the WAN & LAN connection work fine, but the VOIP connection does not work.
The previous router (2811) uses a voice card module VIC2-e/m. But the new router (2911) use voice card module VIC3-e/m. It is used to connect to the PABX Panasonic TD-1232.
Could this be a factor?
Can anyone help?

Hi,
In addition to what Terry has said, the only change is IOS 15.1 where Toll Fraud Prevention feature was introduced which says
The router will automatically add any destinations that are defined as an ipv4 target in a VoIP dial-peer to the trusted source list.You can run the command
show ip address trusted list
To overcome this behaviuor, you can follow the three ways as suggested in below link .The one has been already suggested by Terry.
https://supportforums.cisco.com/document/46566/understanding-toll-fraud-enhancements-1512t
your 28XX router has 12.4 IOS version
regds,
aman

Audigy 2 sound card problems

I am hoping that someone out there can help me in a crucial situation.
I am using an Audigy 2 sound card with creative 5. speakers.
I also use Adobe Audition to edit, record sessions for my voice-over jobs.
Recently, I attempted to hook up a web cam so that I could see my grand daughter on the west coast.
After hooking up the web cam, I noticed my home studio environment changed drastically. I began having trouble with recording using my microphone through my Macki mixer. I began hearing a continuous hiss that I had never experienced before.
In fact after uninstalling the web cam, and restarting my computer, I got that horrible blue screen on my computer indicating the world was about to end! Smile
Long story short, I was able to finally get my computer back up, but I continue to experience problems recording "clean' audio".
Three things, after reinstalling Creative from disc several times and restarting my computer I receive a window stating Creative Media Source Detector.....Unable to load needed components....Please reinstall the application"
Also, when trying to test my sound hardware I get a message stating...Direct play voice setup..."an error occurred during direct play voice setup....error code 0x80004005
Last but not least I cannot access the "Creative diagnostic feature on my computer. I only get a small window for this feature that will not open up fully and allow me to run a diagnostic test!
I know this is a lot to absorb, but I cannot get anyone from Creative to address my problems because I am out of warranty and therefore not getting any love from this company.
Need your advice and or guidance on this.
Please respond when time allows.
Vopro

Re: Audigy 2 sound card problems? use add/remove programs and remove all creative software and drivers, then do the same for your web cam and unplug it
restart your pc
download and install [url="http://downloads.guru3d.com/Guru3D---Driver-Sweeper-%28Setup%29-download-655.html" rel="nofollow">driver sweeper[/url] and use it to clean up any left over creative bits and bobs and restart your pc when it asks you to
now download and install the [url="http://support.creative.com/Products/product_list.aspx?catID=&CatName=Sound+Blaster" rel="nofollow">latest audigy drivers[/url]
once your back in to windows try recording something and see if everything's back to normal
now reinstalling your web cam but don't reinstall using the cd that came with it
find the manufacturer's website and get the latest drivers
install cd's best avoided simply because the software and drivers they contain are typically the initial release versions, and so potentially very old
and i think we can all agree that old, buggy drivers can be a real pain

MacBook Pro 15" video card problems (i think)

Can anyone tell me if this is indeed a video card problem?
MBP 15" info (Dec. 2011)
Processor 2.4 GHz Intel Core i7
Memory 4GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
OS X Lion 10.7.5
This is what happened:
I use my mbp heavily because I edit a lot of videos with Premiere. I also use lightroom / photoshop alot + games. I also installed Parallels desktop late 2013. I don't know if that is relevant but anyway. Everything started late 2013 (a little after installing parallels actually) when there are moments when the audio wouldn't work and I couldn't adjust the volume. It would come back anyway so i didn't mind it. Then the fans were on high speed for little activity. After that the keyboard backlight couldn't be adjusted and wouldnt work. I ignored all of these cuz i wasn't troubling me at the time. In January i left for france to study - I use bike all the time and once stupidly placed my laptop on the basket going to school (rough roads). I had a class with html so I had to open Parallels, my teacher pointed out the fans and how loud they were. That day, parallels desktop said i must upgrade to windows 9 or it will restart every 2hours. I didn't of course. I didn't have time to.
After that (a few days later i think) my laptop would randomly turn into a black screen but it's still on (the power LED is on) I tried turning it off by pressing down the power button and then turning it back on. It worked the first time. During the first week, the frequency of it happening grew. It would do it almost 3 times a day. during that same week I tried to do an SMC reset. It fixed the keyboard light, fans and audio but not the black screen thing. It just keeps on happening around 1-3 times a day. It only happens when I'm using it btw, never when I just leave it. ALSO, after a few days, it would take longer hours to open my mbp again. I mean, the screen would turn black. i would turn it off, then on again. I will ONLY hear the hard drive moving but no startup sound and no grey screen and apple logo. nothing.
The following weeks after that, I asked a friend to help me out. He suggested that I install gfxCardStatus because he said it might be my video card. He instructed that I keep it on intergrated only. So I installed that and did what he said I thought it worked for a while because the black screens stopped happening (even when gfx keeps on going back to dynamic) BUT NOW, MY LAPTOP WOULD FREEZE (not turn black). I'd shut it down using the power button but it still takes me hours to open it again. Sometimes, I'd wait for the battery to drain because it would startup when i charge it (sometimes)
I tried doing AHT as well to confirm the video card problem, but the results are no problems found. I really don't want to replace my logicboard here in france. everything is more expensive here. ;__;
Today I uninstalled parallels to see if that might have had anything to do with my problem now but i think that's just wishful thinking.
Can somebody tell me if this is really about the video card? Thank you

Your appointment at the genius Bar in an Apple Store (anywhere in the world) for an evaluation is FREE, in warranty or out. Those guys put their hands on these Macs all day every day, and they are especially good at Physical and Power problems.
Ask them.

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

Credit Card problem

Hi,
Due to to the Adobe securety problem, I requested a new credit card from my card provider and updated the payment details 24th of October.
The card was debited by Adobe the 25th, but still, I get a warning when I start a CC app stating that there is a problem with the payment and CC will stop wotking in 13 days. Adobe has recieved my money so please fix this asap.
I have been in contact with Chat-support two time, but no help from them
/Stefan

After many,many, many hours of trying I was finally not refused when trying to connect to your payment server (as a first time buyer). So I was asked for my credit card details for the purchase of an application - which I stated. But when I tried to confirm the purchase, my VISA card was refused twice due to "Credit card error". As I know there is nothing wrong with my credit card, please tell me what to do in order to purchase applications from the ovi store. I don't want to pay many times over for an application which I never downloaded from OviStore. But I anyhow also tried my AmEx-card for the purchase of another app, but same "Credit-card" problem. To say that "I am not amused" with my OviStore experience so far must be the understatement of the century.

Video card problem ?

I had this problem 4-5 times
http://img.skitch.com/20081219-e1t87if23rjbhf66gy2dj2aux4.jpg
can someone help me ? could it be a video card problem ? anyone had this problem ?
I have to force shut down and it's quite annoying
thanks

Restart your MacBook and hold down on the "d" key for "diagnostics". This will startup the MacBook into the Apple Hardware Test. Run the extended tests. Let's see if you don't get an error when it checks the video system.
-Doug

Is anyone still having discrete graphics card problems after replacement

Is anyone still having discrete graphics card problems after replacement?
Macbook Pro eligible for replacement through Apple program.
Submitted my computer 2 days before program came into effect.
They replaced card or logic board with same original model: AMD Radeon HD 6770M 1024 MB
Issued me a refund check for my repair.
Seems to have some noticeable issues, fan running more than usual again, and temporary graphic lines,
but disappear too fast before a screen dump...
Is anyone who has participated in the replacement program received a different graphic card for
Model Macbook Pro 17" (late 2011)
Thank you for the reply.

Unfortunately I have yet to call AppleCare because I am on a project for 3 weeks and cannot be without my laptop during that period....
Until that time I am trying to figure out what I can do to protect the Palm Rest/Mouse Pad area of my Macbook once they either fix it or give me a new one. Has anyone had any experience with either of these products that can provide some input as to whether they are good or bad?
http://www.marware.com/cgi-bin/WebObjects/Marware.woa/6/wa/selectedCategory?cata logCatID=224&wosid=djXnz6k0JQiXbGEX7Stos0
http://www.powersupportusa.com/products/macbook-wrtp.php?category=mb

I solved my credit card problem

..adobe couldn't charge my monthly payment today because of my credit card problem..and my membership changed to non-payment membership...my credit card problem solved now....how can i change my membership to payment membership again..

Hi erincertuggoktas,
I would just like to add Romit's reply that you can try this & check if it works,
1. Sign out & sign back in to CCapp (desktop).
2. Launch any product, it will throw a prompt to renew the subscription, at the bottom an option of "license this software" will be displayed.
3. Please click on this & it will ask you to sign in & the subscription should be activated.
Note:The process works when the subscription is active & payment transaction has been completed.
Regards,
Rajshree

MacPro Early 2008 Display/Video Card Problem

*Hello, I have a Dual Quad-Core 2.8Ghz MacPro (Early 2008) with the stock ATI Radeon HD 2600 XT 256MB Video Card. I believe I am having the exact same symptoms listed on the topic "Mac Pro 2008 Video Card Problem".*
*MacPro has been working fine. Until one day, I power it on and the display stays black. There is nothing you can do besides holding down the power button and rebooting the computer. I have tried to do this many times and the display will not come up. I have also tried resetting the VRAM and PRAM settings - still did not work. I have had my MacPro for about one year and a half. It is in very good condition (no damage/no liquid/no overheating). From time to time, you power on the computer and the display works! It is very random. I am scared to turn off the computer or put it to sleep as this can also trigger the problem.*
*I did not get the extended AppleCare (the MacPro itself already cost me about $3400!) I tested the Cinema Display and it is fine, therefore the problem is not coming from the display.*
*I went to the Apple Store and they kept my MacPro for one night. Called me the next day telling me it was going to cost me approximately $800 in order to fix this problem. They claimed that either my Bluetooth module or my Main Logic Board was causing the display not to show. I am out of warranty, and I think it is very expensive. I am doing my research online in order to try and find a cheaper solution. After reading the discussions and checking out some other websites. I have a few questions:*
*If I buy a NEW* ATI Radeon HD 2600 and install it in my MacPro - will it fix my problem?*
*OR - I also heard about the ATI Radeon HD 4870 - Is that graphic card compatible with my MacPro - will that resolve the problem?*
*Do you think I should give it a shot? Are there any other things I can try?*
*I am thinking that I should try to replace the graphic card first and see if that is causing the problem instead of replacing the Main Logic Board right away (which will cost me over $500)*
*Please let me know of any thoughts that come in mind. I really need some support. I am a college student studying Audio Engineering and I use my MacPro everyday on Pro Tools and Logic. This machine is my life.*
*Thank You,*
*Kevin C.*

Glad you solved your problem Gaunja. Here's an update on my own.
When last heard from I had diagnosed the failure of my displays to boot up to graphics card problem in my early 2008 Mac Pro with my stock ATI Radeon HD 2600 by swapping out the same card from my son's Mac Pro and seeing the displays boot up fine. Before heading off to the Apple store for a new card I reinstalled my suspect video card just to see what would happen. The displays booted up fine. Now, two weeks later, again no video display--black screens--no signal from the graphics card. I rebooted the computer several times to no avail and was, again, about to head off to the Apple store for a new card. This time "just to see what would happen" I moved the graphics card to another slot and bingo, the displays are up. What can be determined from my experience to date?
1. The graphics card is flirting with death. Like a patient unwilling to die, through a mysterious force, it rallies to live another day.
2. The slot the card came installed in is unreliable--it's dirty, there's a spec of dust in there, a contact has degraded after two years, or some other slot related fault. Note that, until the card failed for the first time, it had never been removed from it's slot, the computer was treated gently, and it operated in a very clean environment.
If anyone has another theory about what may be happening here please feel free. I fully expect the displays to go dark again at some point as my suspicions are that it's the card itself that is the problem. The two replacement cards I'm considering are the ATI Radeon HD 4870 or the Nividia Geo Force GT120. I've read that both work with the early Mac Pros. Some complain that the ATI card is noisy and expensive. Based of Gaunja's post and others I think the Nividia card will suit my needs, be quieter, and cost less. But, for now, my stock ATI Radeon 2600 lives!
Just one man's experience with the "Mac Pro display, black screen" problem.

Voice chat problem on gmail,skype and oovoo yahoo messanger works at time

Voice chat problem on gmail,skype and oovoo yahoo messanger works at times.
Pavilion dv6, i7, windows 7
at times it tells that your microphone is really quet.
Thanks,
Ranjith

Sounds like the network's firewall or other security feature is blocking the ports used for sending the emails.
What type of neworks do not work? A businees network?

Voice Dialing problems with Galaxy S3

One of the critical safety features of any phone is the ability to place a call by voice command while driving.
The Samsung Galaxy S III has two major failings in supporting this basic need. Problems with S Voice and problems placing calls from a locked phone using a bluetooth headset.
S Voice supports voice dialing, although rather poorly. S Voice is slow to process what I've said (unlike voice typing in every other app) and frequently fails due to "network error".
But worst of all, if I set S Voice to never auto-dial (because I want to confirm that it hasn't misrecognized who I am trying to call), rather than reading me the name it matched and asking me if I want to dial, it only displays the match on-screen, which is useless when driving.
Even if I am willing to trust S Voice to auto-dial, there is still a fatal flaw in voice dialing that I haven't found a way around.
In the phone app, under call settings, Accessory settings for call, Outgoing call conditions, you are able to set whether, when using a bluetooth headset, you are able to use the headset's call button to place a call when the phone is locked.
The problem is the phone's definition of "locked".
If the phone's security is set to only need to swipe the screen to unlock, this feature works as you would expect. However, anyone who is concerned about security of their data would never consider this setting as locked.
If you have your phone's security set to require anything other than a swipe, be it face recognition, PIN, pattern or password, you are unable to place a call using your bluetooth headset's call button.
In other words, there is no safe way to place a call while driving unless you leave your phone with no security.
Ignoring for the moment the significant shortcomings of S Voice for dialing, as delivered to the customer you can not safely use your Galaxy S3 to place a call while driving.
Has anyone found a way to place a call when the screen is locked with a PIN?
Better yet, has anyone found a voice dialing app that works on the Samsung Galaxy S3 as a replacement for S Voice?
Any suggestions on how to get the Galaxy S III to match the capabilities of every other phone I've ever owned will be greatly appreciated.

THANK GOODNESS, someone to feel my pain! LOL On some other forums, I have been attacked for complaining about S-Voice. All of you just described what I am going through. And like Adamant, I am probably going to take the phone back tomorrow. And, also, like Adamant, I don't want to! Dang it! I just want to use my phone HANDS FREE! I have contacted Verizon, Samsung and Jawbone and am more confused than before. Samsung said my phone was too smart for my bluetooth! And that there was nothing they could do about my phone not recognizing my sister's name. This is my favorite example: I say 'Call Rite Aid Pharmacy' simple enough. Phone says 'I can do an internet search for 'Call Rite Aid Pharmacy' !!!!!!!! About enough to make me want an iPhone! not really. But I am going to trade 'down' for a Razr Maxx, I think?
I had no problems with my MOTO Razr! oh yeah, one more thing...S VOICE <Comment deleted per the Verizon Wireless Terms of Service.> ...I could go on; but won't
Message was edited by: Verizon Moderator

Voice card not initializing

I have recently got a router - 1751v
and also a voice card - vip2-2fxs
The card is not getting initialized
error showing card not initializing, unknown hardware found in slot1.
is there any patch for the card to be initialized
pls reply

Hi Amit,
Thank you for ur response
here is the sh tech support details of the router
the card is vic-2fxs
------------------ show version ------------------
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SV8Y-M), Version 12.2(13)T16, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Thu 14-Apr-05 19:25 by yiyan
Image text-base: 0x80008120, data-base: 0x81190E44
ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
ROM: C1700 Software (C1700-SV8Y-M), Version 12.2(13)T16, RELEASE SOFTWARE (fc1)
yourname uptime is 4 minutes
System returned to ROM by power-on
System image file is "flash:c1700-sv8y-mz.122-13.T16.bin"
cisco 1751 (MPC860P) processor (revision 0x400) with 83979K/14325K bytes of memory.
Processor board ID FOC08310YEZ (1669471188), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
------------------ show diag ------------------
Slot 0:
C1751 1FE VE DV Mainboard Port adapter, 3 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 4.0
PCB Serial Number : FOC08310YEZ
Part Number : 73-7241-04
Board Revision : B0
Fab Version : 04
Product Number : Unknown
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 02 4D 41 04 00 C1 8B 46 4F 43 30 38 33
0x10: 31 30 59 45 5A 82 49 1C 49 04 42 42 30 02 04 FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Packet Voice DSP Module Slot 0:
Hardware Revision : 3.2
Part Number : 73-6726-01
Board Revision : A0
Deviation Number : 0-0
Fab Version : 03
PCB Serial Number : VIC09267FBE
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 02
Number of DSP's : 1
DSP memory size(in kwords): 256
Type of DSP : TMS320C549
Product Number : PVDM-256K-4=
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 02 AC 41 03 02 82 49 1A 46 01 42 41 30
0x10: 80 00 00 00 00 02 03 C1 8B 56 49 43 30 39 32 36
0x20: 37 46 42 45 03 00 81 00 00 00 00 04 00 09 02 FF
Packet Voice DSP Module Slot 1:
Not populated
WIC/VIC Slot 0:
Serial 2T (12in1)
Hardware revision 1.0 Board revision D0
Serial number 0024047013 Part number 800-03181-01
FRU Part Number WIC-2T=
Test history 0x00 RMA number 00-00-00
Connector type PCI
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 12 01 00 01 6E ED A5 50 0C 6D 01 00 00 00 00
0x30: 68 00 00 00 00 10 12 00 FF FF FF FF FF FF FF FF
can u pls help....

Differences betwin Cisco Voice Cards

Hi,
I have a Media Gateway that is certificated to work with Cisco 2650XM using NM-HDV-1E1-30E or NM-HDV-2E1-60 cards to make trunk TDM and cisco work as ARU (Automatic response Unit) using TCL 2.0.
Now, i have a cisco 2811 and seen VWIC-2MFT-E1 and VWIC-2MFT-G703 cards, that are more cheap than that the NM cards.
My question is if can I use this VWIC to replace that NM voice cards for applications of ARU (Automatic response Unit) using TCL 2.0.
Thanks.
Fred

Thanks,for your answer.
How i now if my router alredy gave a dsp module ??
Have a cli commando to check ???
using show voice dsp i get:
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABORT PACK COUNT
==== === == ======== ======= ===== ======= === == ========= == ===== ============
----------------------------FLEX VOICE CARD 0 ------------------------------
*DSP VOICE CHANNELS*
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT PACK COUNT
===== === == ======== ======= ===== ======= === == ========= == ==== ============
*DSP SIGNALING CHANNELS*
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT PACK COUNT
===== === == ======== ======= ===== ======= === == ========= == ==== ============
------------------------END OF FLEX VOICE CARD 0 ----------------------------
Thanks.

Credit card problem and wi fi problem

I have Iphone and ipad credit card problem!I cant use credit card hayday or another play???Another problem wifi iphone 5 and ipad 4

You should contact iTunes Support to get that sorted out: http://www.apple.com/support/itunes/contact/

Urgent,voice card problem

Similar Messages

Maybe you are looking for