Urgent - We are havinng a issue in XI

All the messages under adapter engine of production system is displaying wrong start and end time in runtime workbench after DST change .However. correct time is displayed in audit logs
Any ideas ??

ujval,
Look at sap note 1026188,
Your specific issue is addressed in sap note 983147
Symptom
As the J2EE Engine makes use of the time zone features of the JDK this will cause problems if the JDK does not contain the DST fix.
Hope that helps
Regards
Ravi Raman

Similar Messages

  • Urgent help needed; Database shutdown issues.

    Urgent help needed; Database shutdown issues.
    Hi all,
    I am trying to shutdown my SAP database and am facing the issues below, can someone please suggest how I can go about resolving this issue and restart the database?
    SQL> shutdown immediate
    ORA-24324: service handle not initialized
    ORA-24323: value not allowed
    ORA-01089: immediate shutdown in progress - no operations are permitted
    SQL> shutdown abort
    ORA-01031: insufficient privileges
    Thanks and regards,
    Iqbal

    Hi,
    check SAP Note 700548 - FAQ: Oracle authorizations
    also check Note 834917 - Oracle Database 10g: New database role SAPCONN
    regards,
    kaushal

  • Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

    Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

    Thanks Kelly,
    The answers would be the following:
    1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
    Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
    The cells will be numeric, free text, drop downs, and some calculated numeric.
    Are we reaching the limits for UI performance?
    Thanks

  • Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

    Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

    I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
    trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
    The problem was the separated System Reserved Partition. After I removed using this instructions:
    http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
    The upgrade ran ok, and now have my DC as Windows 2012 R2.
    Hope that helps!.

  • What are the major issues to consider in code review? Or performance analys

    What are the major issues to consider in code review? Or performance analysis?

    I would not recommend you to try to optimize performance by checking the coding.
    There is the code inspector which can do all which makes sense automatically.
    The above mentioned points are not the real issues.
    Instead of code review you should execute test cases and measure the exection time.
    1. With STAD if you want to get good time measurement
    2. With SE30 and ST05, if you want to have data for further anaylsis.
    Check total time (SE30), check whether DB part is large, then go to SQL trace. Do the check mentioned here
    /people/siegfried.boes/blog/2007/09/05/the-sql-trace-st05-150-quick-and-easy
    to find the SQL bottlenecks.
    The major point about SQL problems is index support, if there is no proper index support then the performance will be poor. Be aware, that problems are only visible, if you tables are filled.
    In a test system where you have very little data, you will never encounter performance problems.
    Check also the Top10 of the SQ30 hit list.
    Be aware that a proper performance analysis is not a 5 minutes job.
    Siegfried

  • Dear All,what are the major issues in implementation in sap hcm

    what are the major issues in implementation in SAP HCM project scope is PA ,OM,TIME, INDIA PAYROLL

    Hi Ramjan,
    Try to have a clear understanding of requirements and find the best solution in SAP. Keep as much as possible everything standard and based on SAP best practices.
    In PA look for a comprehensive enterprise structure. It's base for everything.
    DON"T do anything through development(ABAP code) as much as possible specially in PT and PY. Try to do claculation by PCRs and Schema.
    Regards,
    Omid

  • What are the major issues in implementation SAP CRM sales and CIC.

    Hi
    We are newly implanting the project to the mobile Manfaturing Company. Our Clint is going for are looking to implement the CIC interaction center win Clint and the Sales modules of CRM .
    We have some 3rd parry raw data with us with that raw data we are calling to the customers and we want create the opportunity in the CIC after that we will convert the opportunity as a sales with our other sales people. After  that  they will sale that product to that customers.
    We have the back end of the R/3 SD, MM modules implemented for Clint.
    Now 1) I want to know after implementation what are the major issues will come in the project normally for the conman  Sales and CIC Win Clint projects kindly give the some  issues normally come  and solutions  for the problems also.
    My motto is that if I know the issues I can make preparation  for that conman issues and I will make my project with good effective and smooth running ..
    with Regards,
    prakesh
    Edited by: prakesh on Dec 9, 2009 6:04 AM

    hi prakesh,
    firstly, cic winclient is an older version and obsolete so its better to implement the new crm version.
    secondly, in any case if you want to implement, then your 3rd party raw data has to be mapped with the SAP system which could be a problem. Middleware could be a lot of effort. Rest all depends on how much customization you need for your business requirement in cic and sales. In case you are implementing standard functionality mostly then no major complications are expected otherwise lot of development effort may be required.
    regards
    shikha

  • I absolutely hate the galaxy note 3!! I want to switch over back to iphone. There are so many issues with this phone!! There has got to be a way I can do this without spending crap ton of money. Its just ridiculous. I am livid

    Overheating
    Battery sucks
    Apps suck
    Phone freezes
    Phone cuts off
    Wall charger doesnt work
    Not good signal
    ^^ These are all the issues that I deal with this phone!! I HAVE HAD FOUR OF THE SAME PHONES. RIDICULOUS. They all suck the same!! I want to go back to iphone ASAP. But between the early termination fee and full retail price it is NOT WORTH IT. I am about to just terminate my service altogether. I am sick of being stuck and stressed out over a mobile device!

        Ambersikes17, we don't want you to cancel your service. Let's get your phone working properly. Are you using the original charger that came with the phone? If so, does it the phone respond to the charger if it is positioned in a different manner?
    Have you noticed if the freezing occurs with certain actions like messaging or using an application? Are these issues that you have had with all of the devices or just your current phone? Have you tried using your phone in Safe Mode? http://vz.to/1d0SZSq
    AndreaS_VZW
    Follow us on Twitter @VZWSupport

  • We are facing an issue in our COE SAP ECC 6.0 instance

    Hi,
    We are facing an issue in our COE SAP ECC 6.0 instance. The sequence of steps performed is as given below
    1. Start Vendor Creation using Create Vendor: Initial Screen
    2. Create Vendor : Address
    3. Create Vendor : Control
    4. Create Vendor: Payment Transactions
    5. Create Vendor: Accounting Information Accounting
    6. Create Vendor: Payment Transactions Accounting
    7. Create Vendor: Correspondence Accounting
    After the above steps are performed the system displays a message Vendor <V No.> was created in company code 1000
    If we try to use the above created Vendor in F-90 or FK02 ( Change Vendor details TCode) it throws an error as "Vendor has not been created".
    The table LFB1 doesnt have the Vendor associated with the Company Id 1000.
    Query: But does anyone WHY the Table is not being updated and WHAT needs to be done to make sure Updation happens in future.
    A quick response on this will be greatly appreciated!

    HI,
       Please chk in the config....
    SPRO>MM->Partner Deter->Partner setting in Rebate Arrangement->Define partner schemas for Rebate..
    Here please check the partner function "PI" is made mandatory...
    You can main the Partner function "PI" in the agreement itself...
    Goto-- txn.MEB2-- enter the agreement no... inside click the icon "Agreement Partner" or (Ctrl+F2) and maintain the partner function PI..
    Regards
    GK.

  • Running Mac 10.5.8 Updated to FF 8.0 - keeps crashing whenever FF opens - can not launch safe mode either - looks like many people here are having same issue - solutions all keep saying it ha.... see detail

    Running Mac 10.5.8 Updated to FF 8.0 - keeps crashing whenever FF opens - can not launch safe mode either - looks like many people here are having same issue - solutions all keep saying it has something to do with roboform 7.6.2 (which is for windows) or the profile. I have created new profile and updated the mac roboform - still no luck - have sent in MANY crash reports with no response ( one was Crash ID: bp-0eea6eb2-aba3-478a-bfb1-8f00d2111110 ) - anyone else find solution other than roboform or profile, or how do i get back to prior version?

    Any suggestions?
    My mail is still not functioning and crashes everytime I open it or check archived messages.

  • When I try to download Photoshop, I keep getting the message:  "We are experiencing some issues, please try again later, if the problem persists, contact Customer Support".  It's persisting.

    When I try to download Photoshop, I keep getting the message:  "We are experiencing some issues, please try again later, if the problem persists, contact Customer Support".  It's persisting.

    try now.  adobe.com just went through 24+hrs of website issues.

  • Are there any issues with using OS X Mavericks and Premiere CC?

    Are there any issues with using OS X Mavericks and Premiere CC?

    Official statement: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
    Peter Garaway
    Adobe
    Premiere Pro

  • New issue , when importing new paid app spreadsheet into Configurator iTunes attempts to download an ipa file for each redeem code .  If you have 100 codes 100 downloads will start. Call enterprise support if you are seeing this issue.

    New issue , when importing new paid app spreadsheet into Configurator iTunes attempts to download an ipa file for each redeem code .  If you have 100 codes 100 downloads will start. Call enterprise support if you are seeing this issue.

    New issue , when importing new paid app spreadsheet into Configurator iTunes attempts to download an ipa file for each redeem code .  If you have 100 codes 100 downloads will start. Call enterprise support if you are seeing this issue.

  • Are there known issues with App Store crashing on iPad?

    Are there known issues with App Store crashing when trying to update apps on iPad 2 with ios6?

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • I have a late 2009 iMac. I installed OSX 10.8.4 and want to go back to Snow Leopard. I have a 1.5TB external HD. Are there any issues I need to know about or tips I need to know before doing this? Thanks.

    I have a late 2009 iMac. I installed OSX 10.8.4 and want to go back to Snow Leopard. I have a 3TB external HD. Are there any issues I need to know about or tips I need to know before doing this? Thanks.

    Downgrade Lion/Mountain Lion to Snow Leopard
      1. Boot from your Snow Leopard Installer Disc. After the installer
          loads select your language and click on the Continue
          button. When the menu bar appears select Disk Utility from the
          Utilities menu.
      2. After DU loads select your hard drive (this is the entry with the
          mfgr.'s ID and size) from the left side list. Note the SMART status
          of the drive in DU's status area.  If it does not say "Verified" then
          the drive is failing or has failed and will need replacing.  SMART
          info will not be reported  on external drives. Otherwise, click on
          the Partition tab in the DU main window.
      3. Under the Volume Scheme heading set the number of partitions
          from the drop down menu to one. Set the format type to Mac OS
          Extended (Journaled.) Click on the Options button, set the
          partition scheme to GUID then click on the OK button. Click on
          the Partition button and wait until the process has completed.
      4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
    If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files.

Maybe you are looking for