Urgent: What ports should be required in DMZ zone?

Hi,
I am thinking the ports question might need to posted here. Please have a look on my posting in the following link:
Urgent: What ports should be required in DMZ zone?
Thanks and Regards,

Thanks, Ravi.
The environment I am working now won't allow me to guess and test. We are on the project and to submit a change request would take very long. So I need submit all neccessary ports correctly at one time.
Could anybody give me any suggestion? I read the TCP/IP ports for SAP documentation. But I don't think it can answer my questions above.

Similar Messages

What port should my email be set on?

What port should my Mac mail be set on? Mine says "995" but my email provider at Comcast states other settings such as "587" or "465".

I did --that is where they said "587" or "465" but they don't state whether they are incoming, outgoing or whatever. Do I change the number on the Mac Mail port to one of those numbers? Maybe I will just email Comcast & ask them. Thanks

What port should iCloud mail be on on my mac

what server port should iCloud mail be on on my mac and what should the incoming mail server address be?

All depends on your TV and what inputs it has available. You will need Mini Display to either HDMI, DVI, or VGA. You will also need an audio cable for sound.

HT5390 What port should i forward in the router if I'm to connect to the mac server behind NAT?

I am trying to remote administrate a Mac Mini running Mac 10.8 server but couldn't figure out which port to use.
Tried the following but still woudn't connect unless DMZ is opened.
Remote Login (SSH) - 22
Screen Sharing Service (VNC) - 5900
Web Service - 80, 443
VPN Service (L2TP) - 500, 1701, 4500
VPN Service (PPTP) - 1723
Any clue?

When you say administer, do you mean something like control your parent's Mac remotely, or do you mean officially adminster a classroom full of Macs? If a classroom full of Macs, then you are most likely taking about using the Apple Remote Desktop software which you pay for.
If, as I suspect, you just want to control your own or a family member's Mac remotely, then you do not need to pay for anything.
If you need Screen Sharing, you open port 5900 (the VNC port)
If you need File Sharing, you open port 548 (AFP)
If you need access to the Unix command line, or you want to use the ssh 'scp' or 'sftp' file transfer commands, then you need to open port 22.
Visit <http://PortForward.com>, they will provide port forwarding instructions for just about every home router out there.
I would also suggest you get a free dynamic DNS name so you can address the remote Mac by a constant name instead of having to know the current IP address assigned to the home router, which the ISP can change anytime they want. No-IP.com or DynDNS.org offer free dynamic DNS names. You run one of their dynamic DNS updating clients on the remote Mac to keep the dynamic DNS name updated with the current ISP assigned IP address.
Once you have the port forwarding working, you connect for screen sharing using
Finder -> Go -> Connect to Server -> vnc://address.of.remote.mac
and for file sharing
Finder -> Go -> Connect to Server -> afp://address.of.remote.mac
If you are going to use ssh, scp, or sftp, then from an Applications -> utilities -> Terminal session you would do something like:
ssh [email protected]
scp local.file [email protected]:/path/where/to/put/the/file
scp [email protected]:/path/of/file/to/get /local/place/to/put/the/file
There are also sftp GUI clients you can use to make this part easier.
If you really cannot get this working, then consider using something like TeamViewer.com which deals with all the messy home router NAT navigation.

What ports should be open for mac-pc chat?

So we've finally got our cams to work with cross-platforming (thanks to sandra and ralph). Now I still have a little bit of problems. I cannot hear him, tho he can hear me, and for some reason, sending/receiving files seem to be hard with most of my buddies. Can someone out there who can do all of these things tell me that optimal ports that they have open? That would be wonderful!

Whenever there is no audio at your end, but the PC user on the other end has a mic and can hear you, the PC user should try "tuning" the preferences for his camera and / or Mic. That may resolve the problem.
To find the setting, he must click on the Preferences menu option that becomes available after he clicks on the Setup icon near the bottom of the AIM 5.9 Buddy List Window.
Once he sees the Preferences, he needs to drop down the list, and click on "Live Video." In the new window that opens, click the button that says "Tuning Video and Audio." Follow the instructions in the wizard that opens.
Some PC users report that they need to reboot their PC after tuning to make the changes effective. Some also have reported that they must re-"Tune" whenever they make ANY camera or mic change, even as simple as unplugging and later plugging the same item back into their PC.
Can someone out there who can do all of these things tell me that optimal ports that they have open?
Your PC pal should see the AIM® Video IM - Frequently Asked Questions for info on setup and router configuration at his end.

SCCM 2012 What Ports Do I need to open so DMZ servers can communicate with my SCCM Server?

Hi,
What ports do I need to open in the firewall so my DMZ servers can talk to my SCCM server on the network?
Here are my steps before to make my DMZ servers talk to my SCCM server:
1. On my SCCM 2012 SP1 CU2 I have bounderies installed --> I install SCCM Client on my DMZ server with the appropriate switches --> I go back to my SCCM server to approve the server --> Works
But now my DMZ servers stops getting definition updates from my SCCM server and I was suggested that it is much easier to open ports in DMZ.
Now, could you please tell me what ports should we open to ensure two way communication among servers?
Thanks!

Yes and no. It's a bit muddy at times.
For Internet based clients, putting an Internet-enabled MP in the DMZ is perfectly acceptable because Internet clients will only choose MPs enabled for Internet communication.
For systems in the DMZ, that's where it really gets muddy. There's no perfect way to accomplish this. IMO, DMZ clients should be allowed to go back to the MP/DP in the Intranet with a targeted opening in the DMZ firewall rules that allows them to only go
to the internal MP. That's a security policy question though for your organization.
Another option is to treat the clients in the DMZ as Internet only clients. This way, they will only go to the Internet MP in the DMZ. You do lose some functionality though like Remote Control.
A final way is to actually put an MP/DP in the DMZ and deal with the timeout's that happen when clients try to talk to the MP in the Intranet. Clients will try 5 times to contact that MP before giving up. They try to find a new MP at the following times
(which are not configurable):
- Every 25 hours
- WHen the client detects a network change
- When the client agent starts
Jason | http://blog.configmgrftw.com

What ports does iTunes update podcasts over?

Hiho
Lately I never succed in updating podcasts while using my 3G data ISP. I suspect they block ports. What ports does iTunes require to download new podcasts?
/peter

Hi Jan,
I am sure the Apple Doc is right.
The Doc was originally written for iChat 2 when you could only chat 1-1
Obviously with an eye on the future, and of the potential for the data traffic to get busy in some locations, allows for the extra ports allocation.
If you are in a 4 way Video chat then that would be 16 ports.
Now in iChat 2 Audio chats used to make use of the same four ports. But as 10 way Audio chats are possible it seems likely this has been changed in multichats to use all twenty ports.
( I am also sure that 16384-16403 is 20 ports )
10:01 AM Saturday; September 1, 2007
Message was edited by: Ralph Johns (UK)

DMZ Zone

Hi ,
i am using Cisco Asa 5510 firewall in my Network with Inside and outside interfaces.
There is a Requirement for DMZ Zone for servers having Public ip addressess.All the users will access the servers seat in the Inside interface and from internet as well.
please advice the command.Enclosed the ASA Config.
Regards,
Saroj

I'd use the ASDM, create a new IF with security level 50, after that create the objects and firewall rules (incl. NAT), thats all.

What are the settings required to block a particular IP to make connection on particular port no running on another IP?

Problem:
-   What are the settings required to block a particular IP to make connection on particular port no running on another IP?
Environment:
Operating System            : - Windows XP Service
Pack 1
System type                     : - 32 – bit Operating System
Description: - We
have requirement to block Port access from particular IP. It is specific requirement for a machine.
We have service which is running on
Server with IP: - 10.14.15.116 on
Port Number 3366 and we need to
block Client Machine IP: - 10.14.15.114 to make
any connections with server on this port. Not even client machine
should be able to telnet on server on port 3366.
I
will be really thankful.
For any kind of input which can assist us to complete the requirement.

Does it allow in same way with firewall setting in Windows Server 2008?
I will read in details shared link, but as a matter of urgency; kindly let us know, if we can follow some concise instruction to do above activity.
I
will be really thankful

What are policy firewall port should be permit between meetingplace web external and internal

I deploy MeetingPlace Web Conferencing with SMA.
1. What are policy firewall port should be permit between meetingplace web external and internal (web external on DMZ zone and web internal on internal zone)?
2. Synchronized Globally Unique Identifiers (GUIDs) between internal and external Web Servers used firewall port?

Hi,
List of Firewall pots to be opened are mentioned in following document, you can refer your deployment type and open ports as mentioned.
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_Audio-Only_Deployments
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_WebEx-Scheduling_Deployments
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_MeetingPlace-Scheduling_Deployments
Regards
Ronak patel

What ports are required to be open on a firewall for UCCX ver7 Backups

I'm trying to setup a backup location on UCCX version 7.
The backup storage location and the UCCX server are seperated by a firewall.
What ports are required to be opened on the firewall to allow the backups through to the backup location.
Can't find any info online

Try it locally on the server itself.
You just need to create a shared directory backup oon the server on C:\ drive.
\\127.0.0.1\C$\backup
This should work.
Link to port utilization guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/configuration/guide/uccx70prtuti.pdf
Regards,
Chuck
Please rate helpful posts and identify correct answers.

What port type should i use?

I am using Seebeyond as middleware and it sending Vehicle IDoc VEHCLE01 to SAP System.
Please help me
what should port type I need to use? Should it be file port or t-rfc port?
What should partner type need to use? Can it be LS type?
Is it ALE or EDI Scenario?
Thanks in advance.

Hi,
Yes, the Port can be a File Port (IDocs will be saved in this folder) or t-rfc port. File port should be OK.
Partner Type can be LS.
Cheers,
Bhanu

What gotchas should we watch out for when porting code from the Adobe SDK to the Acrobat SDK?

What gotchas should we watch out for when porting code from the Adobe SDK to the Acrobat SDK?
... and the other way around?
I have found some evidence that the preprocessor variable PLUGIN seems to prevent macros from includes from being defined. The NPROC and SPROC constructs seem to be involved (partners in crime, if you will).
-Ramon
ps: Please see my related thread "What is the difference between xxProcs.h and xxCalls.h?"

Here's a gotcha that I bumped into:
extern "C" HINSTANCE gHINSTANCE;
I found it in a successfully developed code on the Windows/Plugin side. It is something that I had never used on the APDFL side AND my Windows linker is complaining about several gXXXX missing functions.
IOW: It sounds like the above statement is the solution to my linking problems. Somehow the APDFL seems to take care of the C vs. C++ details.
-Ramon

HT5312 i forgot the answer to my security question which was required by apple to purches an app.. i would appricate any advice on what i should do. thank you. Truong Thanh Cong

i forgot the answer to my security question which was required by apple to purches an app.. i would appricate any advice on what i should do.
thank you.
Truong Thanh Cong

I had this same problem.
Go to http://expresslane.apple.com.
hit iTunes
hit itunes store
hit account management
hit forgotten AppleID security questions.
hit continue and enter your phone number
apple support will call you and guide you through the reset process

HT5312 i forgot the answer to my security question which was required by apple to purches an app.. i would appricate any advice on what i should do.   thank you

i forgot the answer to my security question which was required by apple to purches an app.. i would appricate any advice on what i should do.
thank you.
Mosab azdein

Hi Mva,
If you set up a Rescue email address:
Go into Manage Your AppleID, https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/, select Password and Security, and click the first option (see below), and you will be able to proceed from there..... (I HOPE the first button is showing for you!)
Reset your password
You can change or reset the password for your Apple ID account by providing some information.
Select your authentication method.
Email authentication: To access your information, we will send an email to the rescue email address on file for you.
Answer security questions: To access your information, you will need to answer the security question(s) provided when you originally created your Apple ID.
If you did not set up a Rescue email address:
1. Go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
   Then select 'iTunes Store', and on the next screen select 'Account Management'
   Next choose 'Apple ID Account Security' and fill in that you'd like your security
   questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox)
2. Once your questions have been reset, and you set up new ones, also set up a RESCUE EMAIL ADDRESS, so if you forget them again, you won't have to go through all of this.....
Hope this helps!
Cheers,
GB

Urgent: What ports should be required in DMZ zone?

Similar Messages

Maybe you are looking for