URGENT : why get_file_name does not work in forms 9i ?

Hi all
We use oracle 9i 9.2 Developer Suite in our organization ; and I am developing a forms 9i application which includes a get_file_name(save_file) built-in in a when-button-pressed trigger of a button.
The problem is that when I run the application, then the save_file dialog box does not appear when I click on the button which calls the get_file_name built-in ? We had already tested this application with R6i and it worked succesfully.
Why does it so ?
Thank you very much indeed.

Hello Andy!
I supossed that you are using Webutil 1.0.2 to do the operations in the client machine...In Webutil the get_file_name was changed by client_get_file_name.
If you aren't using Webutil download it from:
http://otn.oracle.com/software/products/forms/files/webutil/webutil_102.zip
When unzip the file you can read the "Familiarization Manual" (doc folder) and installa and configure Webutil to do the client-side operations that you require.
Hope its help
Beatriz.

Similar Messages

Why facetime does not working with any carrier in u.s expect att although the iphone is factory unlocked

why facetime does not working with any carrier in u.s expect att although the iphone is factory unlocked

Facetime only works via WiFi. Are you trying to set up Facetime with a T-Mobile account?

Why condition does not work.

Hi Pros,
in my bex query, there is a CKF OT hours, having a value 30.000, when I set a condition for 'OT hours = 30.000', but get no result out. could you please tell why condition does not work.

HI,
please check the "Characteristic Assignment" Tab in change condition window.
In that tab default selection as "All Characteristic in the drill down independently" change that selection as "Individual characteristic and Char. combinations" and choose the particular characteristic. for ex OT hours against employee means select employee alone.
Regards
Sureshkumar C

Why RSS does not work with my OS X 10.8.2?

Why RSS does not work with my OS X 10.8.2? There was no problem before the upgrade to the Mountain Lion.

By clicking on the RSS icon I'm getting a message:
"No RSS reader is installed. Safari can't open the feed because Safari can't display RSS feeds"
In Chrome I get xml file of the RSS site.
Should I buy something what I didn't need with the Snow Leopard?
Thanks for your help.
Message was edited by: PZA22

I don't understand why ePrint does not work on emailing photos - Discard - Looked like a spam/ virus

I don't understand why ePrint does not work on emailing photos - Discard - Looked like a spam/ virus

Thanks. The problem was solved when I inserted a word in the subject line. Previously I was keeping it blank.

MAXIMIZE WINDOW DOES NOT WORK IN FORMS 9i

Hi,
I am performing forms conversion and developing new forms in Forms 9i. The problem I am running into is that :
the SET_WINDOW_PROPERTY(FORMS_MDI_WINDOW, WINDOW_STATE, MAXIMIZE)
and SET_WINDOW_PROPERTY(ROOT_WINDOW, WINDOW_STATE, MAXIMIZE)
in the When_new_form_instance trigger don't work.
I've also tried adding a parameter to initiate the running mode as WEB as suggested in a response that I saw on this
forum, with that parameter I would set the ROOT_WINDOW State to NORMAL
then set WIDHT=800, HEIGHT=600, POSITION=0, 24.........
but it still does not work. When I run the form, the browser opens up as a full screen, but the form only fills up the gray rectangular
area when the Jiniator is running and loading the applet.
If I don't set the Maximize property of the main window to Yes then the vertical and horizontal scroll bars are automatically added,
if I do set so then no scroll bar is added and the form is cut off.
Is it a known problem ? and is there a solution to it?
Any response is greatly appreciated.
Thanks.
TLe

Thanks, it worked, and I've been playing with other parameters, such as replacing the lookandfeel (this works), but splashscreen and background don't when I specified the .GIF file name, it did not display the GIF image.
Thanks again.

Why it does not work as Hyperterminal?

I use Hyperterminal & setup:
COM3, Baudrate = 115200, 8 bit, 1 Stop Bit, Parity = None, Flow = None
When I type the "*debug" & hit 'Enter' key in the Hyperterminal, it received & showed a lot of Ascii text continously on the dialog (then I close the Hyperterminal)
But when I tried to the same with my vi (please see the attachment), when run the InQ & the Read String dialog box show nothing return!
- I did use the NI Measurement & Automation Explorer to config the COM3 with 115200 successfully (just make sure NI driver can see it)
- Even I change "*debug" or "*debug\r" or "*debug\n" or "*debug\r\n" it still does not work!
Can anyone know why?
Thank for any help
Attachments:
COM3 Serial Write and Read.vi ‏35 KB

Remember that if you are going to use '\' codes your text control must be in the right mode. Right click on the control and select '\' code display. If not you will only send \n as two normal ascii char. \n is most often the correct term char
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Why UDO does not work more in SAP B1 P16?

Someone of you has tried to use UDO in SAP B1 Patch 16?
It does not work more what worked in patch 14 created by code.
I have also created master and detail tables (from menu Options)
and the object by hand but I do not succeed to make to work it!
Can you help me?
Message was edited by:
        Andrea Scavazza
Message was edited by:
        Andrea Scavazza
Message was edited by:
        Andrea Scavazza

Hi everybody,
I am using SBO SP1 PL16 and I have problems with Update in Default Form.
1. I create a Master Data Table and a Lines Master Data Table
2. I create an UDO using Default Form
3. When I test it I get the following behavior:
a) When I add master data an lines at the same time, there is no problem.
b) When I update any data in master or lines, I press Update Button and the message "successfully" is displayed but automatically it gets the old information
c) I tried to find the right information in the table but it was not saved.
Anyone has the same problem?

Multi-select LOV does not work in forms

the multi select LOV does not work in the form.
the LOV works individually but in the form it does not work. it does not allow multiple selection from the list.
is there a workaround for this or is this a bug ...?
any ideas ...?
thanx a lot.
null

Right, we cannot store more than one value in a single column in a table :), we were getting a lot of requests to support multiple select LOVs but requirements were contradictory if not mutually exclusive.
The only sense it makes is when used together with user-defined object types (nested tables for example) but the current [application building]infrastructure we have does not support this. However, we are looking into this and this feature maybe implemented in a future release.

Ctrl+Z does not work in Forms 11g on Windows (undo function)

In Oracle Forms 11g on Windows, the undo function, ctrl+Z does not work as it did in Forms 6i.
The ctrl+C and ctrl+V (copy/paste) work fine.
I looked into the Forms key mapping resource file and no solution there.
Thanks

I'm not sure what functionality you believe you had previously, but UNDO does not have any automatic functionality built-in. This is clearly explained in the Builder Online Help. Here is some of that text. Notice carefully what it says about "Undo":
<blockquote>Magic Item Property
<blockquote>Description_
Specifies one of the the following predefined menu items for custom menus: Cut, Copy, Paste, Clear, Undo, About, Help, Quit, or Window. Magic menu items are automatically displayed in the native style for the platform on which the form is being executed, with the appropriate accelerator key assigned. Cut, Copy, Paste, Clear, Window, and Quit have Built-in functionality supplied by Oracle Forms, while the other magic menu items can have commands associated with them.
Usage Notes_
The following settings are valid for this property:
Cut, Copy, Paste, Clear
These items perform the usual text-manipulation operations. Oracle Forms supplies their functionality, so the designer may not enter a command for these items.
Undo, About
These items have no native functionality_, so the designer must enter a command for these items. Any type of command can be used for these items, except Menu.
...</blockquote>
</blockquote>

Why this does not works??? (I use jsp: include. to contain two jsp files)

I have a main.jsp, and in this main.jsp, I have two part, leftButton.jsp and view.jsp, I want to include the leftButton.jsp and view.jsp to main.jsp.
The code of main.jsp is like follows:
<%@ page language="java" contentType="text/html" %>
<html>
<head>
<title>JSP include element test</title>
</head>
<body>
<table>
<tr>
<td><jsp: include page="leftButton.jsp" flush="true"></jsp: include></td>
                         <td>     <jsp: include page="view.jsp" flush="true"></jsp: include></td>
                    </tr>
     </table>
</body>
</html>
Why the include does not works? by the way, I embeded a flash.swf file in view.jsp.

Hi Mellon,
You might be better off using a JSPF segment for leftButton.jsp & view.jsp and the <%@ include file="relativeURL" %>.
Be careful that the included file does not contain <html>, </html>, <body>, or </body> tags. Because the entire content of the included file is added to the including JSP page, these tags would conflict with the same tags in the including JSP page, causing an error.
Note: It is conventional to put JSP segements under the WEB-INF/jspf/ folder so the file cannot be accessed directly by a URL
Note: JSPF files end with .jspf, so your files would be leftButton.jspf and view.jspf.

Why Rpad does not work in non-English characters...????

Ηι ,
I have the classic table of emp in user scott....
When i insert another row containing non-English characters the rpad function does not work......
SQL> select ename , rpad(ename,12,'.') from emp;
ENAME                          RPAD(ENAME,12,'.')
SMITH                          SMITH.......
ALLEN                          ALLEN.......
WARD                           WARD........
JONES                          JONES.......
MARTIN                         MARTIN......
BLAKE                          BLAKE.......
CLARK                          CLARK.......
KING                           KING........
TURNER                         TURNER......
JAMES                          JAMES.......
FORD                           FORD........
MILLER                         MILLER......
SCOTT                          SCOTT.......
ADAMS                          ADAMS.......
ΠΑΝΑΓΙΩΤΟΥ ΠΑΝΑΓΙWhen i convert it to English characters then it works....
PANAGIOTOU PANAGIOTOU..
How can i make it to work....????
I use 10g v.2
Many thanks...
Sim

Hi ,
SQL> select length('ΠΑΝΑΓΙΩΤΟΥ') from dual;
LENGTH('ΠΑΝΑΓΙΩΤΟΥ')
                  10
SQL> select vsize('ΠΑΝΑΓΙΩΤΟΥ') from dual;
VSIZE('ΠΑΝΑΓΙΩΤΟΥ')
                 20When i issue the command
SQL> select ename , rpad(ename,25,'.') from emp;
ENAME                          RPAD(ENAME,25,'.')
SMITH                          SMITH....................
ALLEN                          ALLEN....................
WARD                           WARD.....................
JONES                          JONES....................
MARTIN                         MARTIN...................
BLAKE                          BLAKE....................
CLARK                          CLARK....................
KING                           KING.....................
TURNER                         TURNER...................
JAMES                          JAMES....................
FORD                           FORD.....................
MILLER                         MILLER...................
SCOTT                          SCOTT....................
ADAMS                          ADAMS....................
ΠΑΝΑΓΙΩΤΟΥ                     ΠΑΝΑΓΙΩΤΟΥ.....It worked.... setting as 25 characters for padding.....
Thanks....for the useful remark
Sim

Why "align" does not works in IE ?

I need to align my SWF file to right side. In HTML code I m
useing align=right ....
It works in Firefox, but not in IE 6 (7). I tried to load SWF
with java, but it also does not work.
IE 6 (7) does not know "ALIGN" ? How can I to align my SWF to
right side ?

Thank you for your help, but it is not what I need.
I dont need align SW to right, or left side of HTML page.
What I need is...
For example : When I use frames. Left frame is FLASH menu and
this SWF is bigger than frame - usualy SWF is displayed from left
side. But I need to align this MENU to the SWF right side.
This code works in Firefox, but not in IE :
<object classid="clsid:d42122....."
width="600"
height="580"
id="mySWF"
align="right">
<param name="movie" value="mySWF.swf" />
<param name="quality" value="high" />
<embed src="mySWF.swf" quality="high" wmode="transparent"
bgcolor="#ffffff" width="600" height="580" name="mySWF"
align="right" type="application/x-shockwave-flash" pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>

Why listeners does not work?

I have the problem with starting sqlplus session.
I have created database mybase.
When I start listener with command:
lsnrctl startand then I try to log into ma database with the command:
sqlplus SYSTEM/MYPASSWORD@mybaseit does not work, although the listeners claims it's OK.
BUT
if the listener the application 'dbca' is started and I choose in it to modify my database without any changes (I suppose it just raises the oracle engine up),
then every think works fine.
Could anyone help me with the problem? How to work without the calling 'dbca' each time?
Thank you.
Waldemar

It is an error! It should be added BEFORE:
...BUT
if BEFORE the listener the application 'dbca' is started ...
Waldemar

Why Skype does not work with the new OS for iphone

Since I downloaded the new OS, skype for iphone does not work at all. Nobody can hear...

Have you tried deleting the app then reinstalling it? If not, give that a try.

URGENT : why get_file_name does not work in forms 9i ?

Similar Messages

Maybe you are looking for