Urgent: Why system allows the scrap confirmation more than PrdOrd Qty.

Dear All,
I am facing client sensitive problem regarding scrap confirmation at CO11N.
As I am having Production Order of 15 qty & having 3 Operation.
Now I have confirmed the first Operation with 15 qty as Yield.
for second operation I confirmed 10 qty yield & 5 as scrap.
for third operation system is allows me to confirmed the 15 qty as a yield.That's should not be allowed logically & practically as well.
& system is allowing to confirmed 'N' no of qty of scrap.i.e more than Production order qty.
Please give your valuble suggesting to clear this issue.
& exact terminology behind the scrap confirmation.
Your immediate reply is highly appreciated
Thanks & Regards,
Vijay Mankar

Hi vijay,
please try this
Quantity Calculation for Milestone/Progress Confirmation
Specifies that for milestone or progress confirmations, the quantities (yield, scrap) of automatically generated confirmations are calculated without taking into account the scrap percentage rate of each operation.
If you do not set this indicator, then the planned scrap percentage rate of each operation is taken into account when calculating the confirmed total quantity. In the generated confirmations, the proportional scrap is added to the yield.
If you set this indicator, then the automatic confirmations are posted with the same total quantities as the the milestone or progress confirmation. Scrap is posted as yield in the automatically generated confirmations.
Example
24 pieces of scrap are planned for an order of 124 pieces. The planned operation quantities are:
Operation 10 124 pieces, 10% scrap (13 pieces)
Operation 20 111 pieces, 5% scrap (6 pieces)
Operation 30 105 pieces, 4% scrap (5 pieces)
You enter a milestone confirmation for operation 30 with 48 pieces for the yield and 2 pieces of scrap. The quantities in the automatically generated confirmations are then calculated as follows:
Indicator is not set
Operation 10 59 pieces, 0 pieces scrap - automatic confirmation
Operation 20 53 pieces, 0 pieces scrap - automatic confirmation
Operation 30 48 pieces, 2 pieces scrap
Indicator is set
Operation 10 50 pieces, 0 scrap - automatic confirmation
Operation 20 50 pieces, 0 scrap - automatic confirmation
Operation 30 48 pieces, 2 pieces scrap
Regards'
Ramesh

Similar Messages

Dont want to allow user to confirm more hours than planned hours

Hi,
in the projects,
we dont want to allow user to confirm more hours than planned hours.
Pls suggest.
Thanks

txn OPST
set confirmation parameters with work and duration deviation = 0
set up std workflow for work/ duration deviation
if anyone does ignore the warning and continues with the confirmation at least you will get a message
this is std SAP no development is needed

HT204053 I want to be able to setup a generic corporate Apple ID to use with icloud and Find my Iphone, that will allow me to have more than 10 devices assigned to the ID. What do I do?

I want to be able to setup a generic corporate Apple ID to use with iCloud and Find my iPhone, that will allow me to have more than 10 devices assigned to the ID. How do I go about creating this account?

I'm not sure if I understand your question, but if you create a new iCloud account with a different ID your existing ID isn't effected by this. It will continue to work as it does now, you will just have an additional Apple ID. If you have an earthlink email address you can continue to use it as a separate account, and it can continue to be your default account if you set it to be (in Settings>Mail,Contacts,Calendars>Default Account). If I'm misunderstanding your question, please explain further.

I used scripting brigde to add a movie that has size bigger than 5GB, exactly after two minutes iTunes return a failed, but the processing of the file is actually added to iTunes Library successfully. The copying take more than 5 minutes to complete. Why?

I used scripting brigde to add a movie that has size bigger than 5GB, exactly after two minutes iTunes return a failed, but the processing of the file is actually added to iTunes Library successfully. The copying take more than 5 minutes to complete. Why the iTunes Scripting Brigde returned failed when it is actually success? It occurred exactly 2 minutes after submit the request to Scripting Brigde. Is this 2 minutes related to the Apple Event time out? if it does, how do I get around this problem? thx

I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account? I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

Why can't owa_text.vc_arr handle the string with more than 4000 characters?

I am using PL_SQL with Oracle8i and OAS 4.0 web server.I want to
use owa_text.vc_arr to pass the inputs in serval text areas in the form on a web application.
If the input string length is less than 4000 characters, everything works fine.However when the strings are longer than 4000 characters but less than the max length 32767 characters, I got this error message:
OWS-05101: Execution failed due to Oracle error 2005
ORA-02005: implicit (-1) length not valid for this bind or define datatype.
In the Oracle Application Server 4.0 documment, it says
about owa_text.vc_arr :Type vc_arr is table of varchar2(32767)
index by binary_integer. It means that owa_text.vc_arr can handle multiple strings and each string can have up to 32767 single byte characters, is it right?
Owa_text.vc_arr is supposed to handle the string with more
than 4000 characters, is it true? Could anyone tell me why? Any
help will be greatly appreciated!!!
Thanks very much.
Helena Wang
Here is the pl_sql procedure to create my form on the web:
PROCEDURE myform
IS
BEGIN
htp.p('
<form action="'||service_path||'helena_test.saveform3"
method=post>
<input type=hidden name=tdescription value="X">
Input1: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
Input2: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
<input type=submit name=WSave value="Save">
</form>
END;
/***** here is the pl_sql procedure which I use to save the
form***/
procedure saveform3(tdescription in owa_text.vc_arr,
WSave in varchar2 default 'No')
is
len pls_integer;
begin
for i in 2..tdescription.count loop
len := length(tdescription(i));
htp.p(len);
htp.p(tdescription(i));
end loop;
end;

The maximum size of a VARCHAR2 field in Oracle 8i is 4000 bytes.
you'll ned to use a LOB type (or LONG if you prefer the old way)

Why Apple allows the company to place ALLEGRO fakes in the website?

why Apple allows the company to place ALLEGRO fakes in the website?
http://allegro.pl/sluchawki-apple-earpods-iphone-5-z-mikrofonem-i3450310811.html
regards
Sebastian

Here:
Słuchawki są zamiennikami Earpodsów nie oryginalnym produktem Apple

Is there a datatype that allows me to store more than one item at a time

Hello Everyone,
Is there a datatype that allows me to store more than one item at a time , in a column in a row?
I have to prepare a monthly account purchase system. Basically in this system a customer purchases items in an entire month as and when required on credit and then pays at the end of the month to clear the dues. So, i need to search the item from the inventory and then add it to the customer. So that when i want to see all the items purchased by a customer in the current month i get to see them. Later i calculate the bill and then ask him to pay and flushout old items which customer has purchased.
I am having great difficulty in preparing the database.
Please can anyone guide me! i have to finish this project in a weeks time.
Item Database:
SQL> desc items;
Name Null? Type
ITEMID VARCHAR2(10)
ITEMCODE VARCHAR2(10)
ITEMPRICE NUMBER(10)
ITEMQUAN NUMBER(10)
Customer Database:
SQL> desc customerdb;
Name Null? Type
CUSTID VARCHAR2(10)
CUSTFNAME VARCHAR2(20)
CUSTLNAME VARCHAR2(20)
CUSTMOBNO NUMBER(10)
CUSTADD VARCHAR2(20)
I need to store for every customer the items he has purchased in a month. But if i add a items purchased by a customer to the customer table entries look this.
SQL> select * from customerdb;
CUSTID CUSTFNAME CUSTLNAME CUSTMOBNO CUSTADD ITEM ITEMPRICE ITEMQUANTITY
123 abc xyz 9988556677 a1/8,hill dales soap 10 1
123 abc xyz 9988556677 " toothbrush 18 1
I can create a itempurchase table similar to above table without columns custfname,csutlnamecustmobno,custadd
ItemPurchaseTable :
CUSTID ITEM ITEMPRICE ITEMQUANTITY
123 soap 10 1
123 toothbrush 18 1
ill just have it as follows. But still the CUSTID FK from CustomerDB repeats for every row. I dont know how to solve this issue. Please can anyone help me.
I need to map 1 customer to the many items he has purchased in a month.
Edited by: Yukta Lolap on Oct 8, 2012 10:58 PM
Edited by: Yukta Lolap on Oct 8, 2012 11:00 PM

You must seriously read and learn about Normalization of tables; It improves your database design (at times may increase or decrease performance, subjective cases) and eases the Understanding efforts for a new person.
See the below tables and compare to the tables you have created
create table customers
customer_id       number      primary key,
fname             varchar2(50) not null,
mname             varchar2(50),
lname             varchar2(50) not null,
join_date         date          default sysdate not null,
is_active         char(1)     default 'N',
constraint chk_active check (is_active in ('Y', 'N')) enable
create table customer_address
address_id        number      primary key,
customer_id       number      not null,
line_1            varchar2(100)   not null,
line_2            varchar2(100),
line_3            varchar2(100),
city              varchar2(100)   not null,
state             varchar2(100)   not null,
zip_code          number          not null,
is_active         char(1)         default 'N' not null,
constraint chk_add_active check (is_active in ('Y', 'N')),
constraint fk_cust_id foreign key (customer_id) references customers(customer_id)
create table customer_contact
contact_id        number      primary key,
address_id        number      not null,
area_code         number,
landline          number,
mobile            number,
is_active         char(1)   default 'N' not null,
constraint chk_cont_active check (is_active in ('Y', 'N'))
constraint fk_add_id foreign key (address_id) references customer_address(address_id)
create table inventory
inventory_id          number        primary key,
item_code             varchar2(25)    not null,
item_name             varchar2(100)   not null,
item_price            number(8, 2)    default 0,
item_quantity         number          default 0,
constraint chk_item_quant check (item_quantity >= 0)
);You may have to improvise and adapt these tables according to your data and design to add or remove Columns/Constraints/Foreign Keys etc. I created them according to my understanding.
--Edit:- Added Purchases table and sample data;
create table purchases
purchase_id           number        primary key,
purchase_lot          number        unique key not null,     --> Unique Key to map all the Purchases, at a time, for a customer
customer_id           number        not null,
item_code             number        not null,
item_price            number(8,2)   not null,
item_quantity         number        not null,
discount              number(3,1)   default 0,
purchase_date         date          default sysdate   not null,
payment_mode          varchar2(20),
constraint fk_cust_id foreign key (customer_id) references customers(customer_id)
insert into purchases values (1, 1001, 1, 'AZ123', 653, 10, 0, sysdate, 'Cash');
insert into purchases values (2, 1001, 1, 'AZ124', 225.5, 15, 2, sysdate, 'Cash');
insert into purchases values (3, 1001, 1, 'AZ125', 90, 20, 3.5, sysdate, 'Cash');
insert into purchases values (4, 1002, 2, 'AZ126', 111, 10, 0, sysdate, 'Cash');
insert into purchases values (5, 1002, 2, 'AZ127', 100, 10, 0, sysdate, 'Cash');
insert into purchases values (6, 1003, 1, 'AZ123', 101.25, 2, 0, sysdate, 'Cash');
insert into purchases values (7, 1003, 1, 'AZ121', 1000, 1, 0, sysdate, 'Cash');Edited by: Purvesh K on Oct 9, 2012 12:22 PM (Added Price Column and modified sample data.)

Light Switch 2011 "C#" How to allow filter which take more than one entry to take * and show all other entries?

Dear All,
I have created the following code which extended my filter functionality and allowed a to take more than one entry (Comma have to be inserted after
each entry).
For example:
"Country Filter" can take ----> Germany,Egypt,Holand<o:p></o:p>
"City Filter " can take ---------> Berlin,Münster
if (Country_PAR != null)
String[] Country_Array = Country_PAR.Split(new Char[] { ','});
query = from p in query where Country_Array.Contains(p.Hotel_Country) select p;
if (City_PAR != null)
String[] City_Array = City_PAR.Split(new Char[] {','});
query = from p in query where City_Array.Contains(p.Hotel_City) select p;
Now want to extend it more and say something like:
If * is included ---- > Give me all entries
ex. Ge* This will give me everything which starts with Ge
If <> is entred -----> Give me entries which are not equal to a certain entry
ex. Country Filter = <> Germany give me all other entries except Germany
Thanks alot,
Zayed

Thanks your reply. I mean no one know my feeling. except if the new car is your. If Geek Squad can't install it. Just let me know and go. right? I ask many time? Are you ok to finish? He said yes. First time fail after 5 hours long wait and tow my car to Toyota repair. Second time said only take 20 to 30 minutes to program the key. but fail again after about 4 hours 30 minutes long wait and head light is not automatic turn on at night. I have to take a day off drive to Toyota repair. My time is money. wait there more than 10 hours and done nothing. 5 days no car and take the subway Bus and long walk. How do I feel? I m the customer. if without the customer. How you get pay? Geek Squad use my remote start and alarm and I can't return it. I loss time and money. My new car has a repair record. That is what Bestbuy want to do for the customer. Geek Squad work for Bestbuy. right? You are not just loss one customer. You will loss more and more than the remote start alarm cost. Bestbuy will not know? How come just 200$ remote start alarm and the 50$ module. Bestbuy don't want to reimburse. I m not tell you to pay me 5 days for rental car. why don't just want a happy ending? Bestbuy is big company. I m very small. 250$ it cost Bestbuy nothing. You can't let the customer loss money because you. right?

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else on top of it.

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else over the top of it. Some pages will run text and pictures together, like a car rear-ending another or a train pile up. Other pages will cut an image or text short, i.e. it will display a portion of the top of the image or text but not the rest. This happens on Amazon for example, the section where it says "Customers who looked at this also looked at" will allow only a certain amount of the upper portion of the description immediately below the picture of the product but below that section everything is fine until I get to another section displaying more products and their descriptions and then it cuts the bottom portions off again. I've noticed this behavior mostly in the sections with product photos, the text sections seem okay. YouTube also displays this behavior. It's even doing it on this page right now. Below this box I can read "The more information you can provide the better chance your question will be answered " , but directly below that in the next sentence I can see the start of it with "Troublshootin" and the "Automatically Add" in a green field covering the "g". The next clear text is "A window will open in the top corner. Click Allow, and then click Install. If the automated way doesn't work, try these manual steps." I tried turning of pre-fetching, clearing history, cookies, and cache, scanning for malware with Avast and Windows Defender all to no avail. It began when I upgraded from dial up to DSL via AT&T Uverse. I have a Motorola NVG510 modem. The modem was replaced an hour ago along with new dedicated lines and DSL/Phone splitter from the box by an AT&T technician to make sure my incoming lines were up to par. He ran a connection test and verified everything is up to standards. IE does not display this behavior. I am running Firefox20.0.1 and all previous versions have acted the same way since I upgraded to DSL about 3 months ago.

If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Unable to view image if the size is more than 3KB using XML Publisher.

Hello,
We are printing PO approver signature using xml publisher (rtf) on a pdf.
If the size of the image is 3KB or less, the image gets printed.
But, if the size is more than 3KB the image does not get printed.
Additional Info:
1. The signature is stored as jpg image in fnd_lobs table.
2. On following code is mentioned in the rtf
<fo:instream-foreign-object content-type="image/jpg">
<xsl:value-of select="IMG_SIGNATURE"/>
</fo:instream-foreign-object>
3. We are using the following function that converts BLOB to CLOB.
CREATE OR REPLACE FUNCTION XX_BLOBTOBASE64
b IN BLOB
RETURN CLOB
IS
sizeb PLS_INTEGER := 4080 ;
buffer RAW(4080);
offset PLS_INTEGER DEFAULT 1;
RESULT CLOB;
BEGIN
-- dbms_lob.createtemporary
-- lob_loc => RESULT
-- , cache => FALSE
-- , dur => dbms_lob.CALL
-- LOOP
-- BEGIN
-- dbms_lob.READ
-- ( lob_loc => b
-- , amount => sizeb
-- , offset => offset
-- , buffer => buffer
-- EXCEPTION
-- WHEN no_data_found
-- THEN
-- EXIT;
-- END;
-- offset := offset + sizeb;
-- dbms_lob.append
-- ( dest_lob => RESULT
-- , src_lob => to_clob(utl_raw.cast_to_varchar2(utl_encode.base64_encode(buffer)))
-- END LOOP;
DBMS_LOB.createtemporary(lob_loc => RESULT, CACHE => FALSE, dur => 0);
Wf_Mail_Util.EncodeBLOB ( b, RESULT );
RETURN RESULT;
END;
Requesting any of you to let us know if there is any method to resolve this issue.
Thanks,
Angelica.

Hi,
Are you using Outlook.com to send/receive emails? Based on my research, we can only add an image/ picture in your e-mail signature that’s Web based (picture that is available in existing websites or stored in an online storage). See:
http://answers.microsoft.com/en-us/outlook_com/forum/osettings-oemailset/add-logo-to-outlookcom-signature/4455facf-0926-42a6-aad7-756de662a865
Since this forum is for general questions and feedback related to Outlook desktop application, if you are using Outlook.com, I'd recommend you post your question in the Outlook.com forum:
http://answers.microsoft.com/en-us/outlook_com/forum?tab=Threads
The reason why we recommend posting appropriately is you will get the most
qualified pool
of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Clear the line items more than 999 through F-28

Hi,
I have one issue,
senario is like below:
Step1:
F110 - Create the payment order for customer. if customer have more than 999 line items also payment order is updating
Step2:
Clear the invoices with referece to Payment order in F-28
here while clearing the customer line items using payment order referece if line items is more than 999 for customer it is not allowing to clear. error message is line items more than 999.
I have checked with tecnical people can we split the clearing if more than 999 line items. as per them is if it is not referece to payment order it is possible to write some code based on document type or posting date they can split.
here it is not possible. I tried with summrizaiton senario as specified in sap notes if line items more than 999. it is not also working.
i have one more question also while running f110 can we restrect the payment order to geneare upto 999 line items if it exceeds it should create other payment order of remaing line items so on.. is it possible?
can any body give a light to resove this issue.
BR:
Venkat.Gurram

Hi,
I have already checked that link .
I have implemented the note: 36353 for summrizaiton.
for payment order we can't do sumarization due to we can't the payment order while cleargin.
give me some other idea
BR:
Venkat.Gurram

ITunes will not allow me 2 add more than 3 songs at one time in2 my library

iTunes won't allow me to add more than 3 songs at one time into my library. I just want to select a number of songs in 'My Music' folder on my pc and then add them in one go. I used to be able to on older versions of iTunes, but now it will only let me add 3 songs (using the 'add file to library' option), and no more then one (using the 'import' option). It's just very annoying as it takes aaages to add songs into my library, when it shouldn't. if anyone knows how to overcome this, please let me know! Thanks
Message was edited by: 5Gmel

how did u do it i've being trying for a long itme now and it takes forever to add music please share

What causes my ipod touch 4g to become extremely hot when i play games or surf the web for more than 30 minutes?

my ipod touch 4g becomes very hot when play games or surf the web for more than 30 minutes. does any body know why?

Maybe the solution is that you iPod is slow is because you are not closing your apps after you use them. To do this you must:
1. Press the Home Button to get out of that app
2. You will return to the Home Screen
3. Click the Home Button twice, (do this quite fast, But not TOO fast)
4. A bar with all your apps that you have come out of will be on the bottom of the screen
5. Hold down one of those apps
6. They will start to "jiggle"
7. A little red circle will be beside all of the "jiggling" apps
8. Press that little red circle and those apps will close (NOTE: This is NOT deleting your apps)
9. Now you apps are closed NOT deleted
10. Your iPod will now speed up in: Browsing, downloading, syncing and much more
11. (Bonus) - To DELETE an application do the same thing ( But not clicking the Home Button twice) and all of your apps which you downloaded will "jiggle" and there will be an black circle with an X in it, click that X to DELETE that app and a dialog will pop up and say: "Do you really want to delete this app?" If you want to: Click yes.
And that is how to speed up your iPod
Bonus) - is how to DELETE an App
Thank You,
Apple 5

The report displays more than 3000 pages with same content.

Respected Sir
I have a report with form letter layout.
The report contains only one page,but while running the paper layout ,the report displays more than 3000 pages with same content.
please anyone give a solution to this problem

I think there is no bad joining. b'se when the querry is executed in sql, it is working properly(means returns only one record) . This problem is not for a particular report. Any report using the "form layout", the same problem occurs.
Why this problem occurs. How can we solve it.
Bye

Owa_text.vc_arr: can't handle the string with more than 4000 characters?

In the Oracel Web Application Server 4.0 documment, it says
about owa_text.vc_arr :Type vc_arr is table of varchar2(32767)
index by binary_integer.
I amusing PL_SQL with Oracle8i and OWA4.0 web server.I want to
use owa_text.vc_arr to pass the multple line texts in my form.
If the text length is less than 4000 characters, everything works
fine.However when the texts are longer than 4000 characters but
less than the max length 32767 characters, I got this error
message:
OWS-05101: Execution failed due to Oracle error 2005
ORA-02005: implicit (-1) length not valid for this bind or define
datatype.
Owa_text.vc_arr is supposed to handle the string with more
than 4000 characters, is it true? Could anyone tell me why? Any
help will be greatly appreciated!!!
Thanks very much.
Helena Wang
Here is the pl_sql procedure to create my form:
PROCEDURE myform
IS
BEGIN
htp.p('
<form action="'||service_path||'helena_test.saveform3"
method=post>
<input type=hidden name=tdescription value="X">
Input1: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
Input2: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
<input type=submit name=WSave value="Save">
</form>
END;
/***** here is the pl_sql procedure which I use to save the
form***/
procedure saveform3(tdescription in owa_text.vc_arr,
WSave in varchar2 default 'No')
is
len pls_integer;
begin
for i in 2..tdescription.count loop
len := length(tdescription(i));
htp.p(len);
htp.p(tdescription(i));
end loop;
end;

Helena, I think you might get a better response either from the SQL-PL/SQL forum, or perhaps the Portal Applications forum - both of these tend to have folks very familiar with PL/SQL and the OWA packages.
This forum is on Web services based on SOAP, WSDL and UDDI. These can be PL/SQL based but typically don't use the mod_psql or OWA web solution.
As a pointer, I suspect you may already be familiar with, but just in case, you can always take a look at chapter 3 of the OAS documentation, "Developer's Guide: PL/SQL and ODBC Applications" where they go through a number of examples using parameters. See:
http://technet.oracle.com/doc/appsrvr4082/guides/plsql.pdf
Hope this or folks from the other list can help.
Mike.

Urgent: Why system allows the scrap confirmation more than PrdOrd Qty.

Similar Messages

Maybe you are looking for