Urgent....work-center/cost center table...have ur point.s

Hi all,
I have work-center, I want to find the corresponding cost-center.
But on screen i m getting structure CRKEYK.
Please let me know the table...
Urgent.
<b>Help me ....n have ur points.</b>
regards,

Hi Pradeep,
AFRV is the table which will have both work center & cost center.
<b>Reward points if it helps,</b>
Satish

Similar Messages

Document change/display - Profit Center / Cost center name

Hi,
We have a requirement where client wants to display the profit center and cost center names (short or long) when displaying or changing a parked or a posted document. As we all know SAP shows only the profit center and cost center code and not the description during the document display. After all the deliberations, this seems to be an important piece of information while posting a parked document or even viewing it as a posted document.
What are our options?
Any help is much appreciated.
Regards,
Subodh

Thanks for your response Tamim.
Profit center / cost center naming is following a different convention and we are in a roll out phase, therefore we can't think of first item.
About match code, the requirement is not so much during the posting but primarily while releasing the parked document or viewing the parked / posted document - they want to see the description along side profit / cost center.
I was looking for clues on any utilities / enhancements / BTE that I may use to bring extra fields during document display.
Regards,
Subodh

Why time-dependent not work for cost center and profit center hierarchy

Has anybody been able to successfully turn on time-dependent for cost center hierarchy? Looks like the R/3 datasource 0COSTCENTER_0101_HIER is defaulted to be NOT time-dependent, and I dont know how to change the R/3 configuration to enable time-dependent for this datasource.
Here is what I found. If you go to RSA2 in R/3 and enter datasource 0COSTCENTER_0101_HIER, and then select "Hierarchy Info", you will see that all the time-dependent properties are unchecked by default. By comparison, Cons Unit datasource 0CS_UNIT_CSCU_HIER has Version Dependent Hierarchy as selected, and we are able to load Cons Unit hierarchy as time-dependent, but have no luck so far with the Cost Center hierarchy.
Can any BI guru tell me how I can make time-dependent work for the cost center hierarchy?
Thanks a bunch!

Check SETLEAF and SETNODE.
Basically CO Master data groups dont have seperate tables. They will be available in above tables. Choose proper Set class to filter the results

Work Order & Cost Center Commitment Management

We have a business requirement to be able to view our work order commitments (Reqs and POs) from the work order as well as from the cost center assigned to the work order via a settlement rule. Our business users do not like the work order collecting all of the costs instead of the cost center where they perform their cost controlling.
The actuals will settle to the cost center eventually but without the commitments they have no way of planning for future costs. Commitments management is activated for both the cost centers and work orders involved. I am open to any suggestions on how to achive this requirement. Thanks!

Any thoughts?

Substitution not working for Cost Center

Hi All,
We are using OBBH to make a substitution for Foreign Exchange valuation to meet one of requirement as cost center at line item level to be blank, we have made cost center field blank in substitution.
When we run the foreign exchange valuation system is updating the cost center from the source line item to the difference account. It is not considering the substitution value which is blank in cost center.But we have added some other fields in substitution those are working fine other than the cost center.
Do I need to make any settings for this to take cost center as blank at line item level.
Regards,
Shilpa

Hi Shilpa,
the substitution may be used for filling the cost center when it is empty, but not for clearing it when it is filled, because the substitution isn't called when the cost center is already filled.
Please read OSS note 1296568.
[https://websmp230.sap-ag.de/sap(bD1mciZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1296568]

Work Center & Cost Center

Hello,
If I make one cost center in SAP and I have four work centers. So can I assign all the Work Centers to the single Cost Center I created earlier
Or
I have to make Separate Cost Center for each of my work Centers???
Regards,
Piyush

Hi Piyush,
For Eg: There are three work center W1,W2 & W3.
There are two cost center 5250, 5350
In the costing tab page of the workcenter (CR01/CR02) we can assign the cost center.
i.e. cost center 5250 can be assigned to W1, W2 & W3.
But For one work center i.e. W1 cost centers 5250 & 5350 both cannot be assigned. i.e. One work center can be assigned only one cost center.
Hope this helps,
Regards,
Senthilkumar

What is Budjet, Profit, Work and Cost center means?

Hi Guys,
Can u explain Budjet center, Profit center, Work center and Cost center? Also if i miss any other center like these!
What is the functionality of each in business point of view?
If possible with an example:-)
Thanks,
Vinod.

Hi.
Please use a search enginge before aksing here. BTW: If you use a search engine perhaps it is advisable to write 'budget' instead of budjet.
And before I forget this I would like to point out that your question is not related to ABAP. Therefore this forum is not the right place to ask it anyway...
Thread will be locked.
Jan Stallkamp
Edited by: Jan Stallkamp on Jul 23, 2008 1:18 PM

Org Level, fund center/cost center level restriction for tcodes????

I am looking to see whether org level restriction and cost center/fund center level restriction is possible for certain set of transactions.
I am using USOBX table for this analysis. This table has a check flag field ( same as in SU24) which says whether the Tcode (program) does the authority check for certain auth objects. Example- X (checked but not maintained in USOBT). This table pulls up several authorization objects under the 'X' category. However, when I do the System trace for the same tcode, all the objects (marked as X) are not captured. Instead only a few are captured.
Can we rely on the USOBX data or should we do system Trace for every tcode. I am just pulling a report and not creating roles at this point. So trace is time consuming. But data reliability is equally important.
My objective is to verify whether org level and cost center/fund center level restriction is possible or not for some tcodes.
Do you have any suggestion to achieve this faster (through USOBX or any other means)?
Thanks in advance
Kee

I would suggest you to check USOBX_C and USOBT_C instead of USOBX and USOBT as it will have your customization as well and not just the standard ones given by SAP.
Also when check field is X ...it means the object is checked but not maintained for the t-code as you already said but I am not sure how much it will help you as the they will not be pulled by PFCG when you are creating the role until you change the object to Check / maintain . When you do that the check field will be Y and not X. So basically it is the Y one which you need to see.
Going for trace is time consuming for every t-code and I am not sure if it really needed. When your roles are in testing phase and are tested by the functional team or the team which needs it and if they are missing some object, you can run a trace and find the missing object....
I am not sure on what basis you want to change some field to Org level ...but typically it is done if you want to do segregation of roles based on these org level. There could be various other reasons and it is better to talk to your functional counterparts before changing a field to Org level.
for ex : If you want to segregate on company code, you will create co. code as Org level and create roles for different company code.

Profit Center - Cost Center link

Given the Profit Center, is there a table I can check to find which Cost Centers are linked to it?

since we assign the profit center in the cost center master data, go by the cost center.
use table CSKS for cost center > profit center link, then sort on profit center.

Profit Center / Cost Center Distribution

Hello,
I'm trying to send Profit Centers / Cost Centers via IDoc. I can create the master records with PRCMAS01 / COSMAS01, but I'm not sure how to do the assignment to a company code via IDoc. Can anyone shed some light?
Thanks,
Harrison

Update:
The cost center IDoc contains a field for company codes even though it's not mentioned in the IDoc documentation for COSMAS01. As cost centers are only assigned to one company code the field only supports one entry
Profit centers on the other hand do not support the assignment of company codes via IDoc. I believe this is because SAP by default assumes that you want to assign a profit center to all company codes, therefore it doesn't have a purpose for a structure to support this in the IDoc.

Help on fox used to one/all profit center/cost center of one company code

Hi experts,
I have a fox formula witch is to be applied in diferent situations:
1. To one cost center
2. To all cost centers of one company code
3. To one profit center
4. To all profit centers of one company code
I'm using the following variables:
ZIPROFCE (1st profit center selected in query)
ZIPROFC2 (number of profit centers selected in query)
ZICOSTCE (1st cost center selected in query)
ZICOSTC2 (number of profit centers selected in query)
The formula is actually like below, guess it is not worrking because I can't have an integer number accepted by chars 0profit_ctr and 0costcentr. I am thinking of adding another char in the infocube witch is integer (without master data), and it would do the job. Is there other way out, so I can mantain actual aggregation levels and filters?
DATA PERIOD TYPE 0FISCPER3.
DATA PER_P TYPE 0FISCPER3.
DATA PCENTER TYPE 0PROFIT_CTR.
DATA PCENTER1 TYPE 0PROFIT_CTR.
DATA PCENTER2 TYPE 0PROFIT_CTR.
DATA CCENTER TYPE 0COSTCENTER.
DATA CCENTER1 TYPE 0COSTCENTER.
DATA CCENTER2 TYPE 0COSTCENTER.
DATA PLANPER TYPE F.
PCENTER1 = VARV (ZIPROFCE).
PCENTER2 = VARV (ZIPROFC2).
CCENTER1 = VARV (ZICOSTCE).
CCENTER2 = VARV (ZICOSTC2).
PLANPER = VARV (ZEPLANPE).
PER_P = VARV (ZEPLAPER).
*IF CCENTER2 = 1.
CCENTER = CCENTER1.
*ENDIF.
IF PCENTER2 = 1.
CCENTER = #.
PCENTER = PCENTER1.
ELSEIF PCENTER2 > 1.
CCENTER = #.
ENDIF.
FOREACH CCENTER, PCENTER.
PERIOD = PER_P.
DO.
IF { ZCOMPROM, CCENTER, 013, PCENTER } <> 0.
{ 0AMOUNT, CCENTER, PERIOD, PCENTER} = { ZCOMPROM, CCENTER, 013, PCENTER } / PLANPER.
ENDIF.
PERIOD = PERIOD + 001.
IF PERIOD = 013.
EXIT.
ENDIF.
ENDDO.
ENDFOR.
Tanks in Advance,
João Anastácio

Hello João,
you are making it more complicated than it is:
Fields to be changed: Key figure, period
DATA PERIOD TYPE 0FISCPER3.
DATA PLANPER TYPE F.
PLANPER = VARV (ZEPLANPE).
PERIOD = VARV (ZEPLAPER).
IF { ZCOMPROM, 013 } > 0.
{ 0AMOUNT, PERIOD} = { ZCOMPROM, 013 } / PLANPER.
ENDIF.
Regards,
Marc
SAP NetWeaver RIG

Profit center & cost center

Hi,
i look for a transaction with which i can show the profit center correspond to each account.
i hope your help
regards
jehade

Hi,
i look for a transaction with which i can show the cost center correspond to each account.
i hope your help
regards
jehade

Trial Balance table Profit Center/Cost Center

Hi SAP Experts,
I want to download SAP trial balance as per profit centre,cost centre, I know there are lot of standard report but I am looking for tables where I can download these values?
Thanks,
Suyog

Hello Suyog ,
Long before I had worked on such a report.
Please try with any of the tables between FAGLFLEXA or FAGLFLEXT ( If I have recalled correctly )
FAGLFLEXT is for TOTALS so I think it will be appropriate.
Please check.

Urgent : Work process in WP table of MMC are getting status as ended

Hi,
By mistake we have ended work process from Task Manager and the MMC status we are getting is yellow only..
The entries in WP Table are changing from RUN to Ended but not reaching WAIT.. Please help me how can I recreate work process or how can I wake up those.
help will be appreciated..
Thanks..
Satya..

this answer was not very helpful!
he told us, that he stopped a work process in taskmanager (for Unix people: kill -9) and after that the instance gets yellow in MMC.
what has this todo with listener, Env variables or database character set? nothing? so why change something?
I assume that he stopped the dispatcher or multiple work processes. In this case the instance gets yellow status because only the gateway is remaining.
We are not able to start a single process in a startup group after it failed.
As I already told him, stop the instance and start it again. The easiest way is perhabs rebooting.
interesting sources for analysing the root of the problem:
1. Windows Eventviewer (application eventlog)
2. SAP Tracefiles \usr\sap\<sid>\dvebmgs<no>\work dev_disp, dev_w*
regards
Peter

Profit center cost center assignment

Dear All ,
1) i need the total list of cost centers assigned to which profit center ?
2) tcode to view the balance sheet
pl guide

Hi,
1) Check Assignment to Profit center
2) The T code to get into Balance sheet SA38 -> RFBILA00 or S_ALR_87012284.
Regards,
Akhila.

Urgent....work-center/cost center table...have ur point.s

Similar Messages

Maybe you are looking for