Urgent - workflow - drawing in release state

hi friends..
I have one issue.
The drawing is in release status howewer it is stuck in workflow because
in the background it is trying to go from IW to IR.The workflow does not state
how or when the drawing was released...
so at the movement what can i do..
just restart an workflow or anyother else..
plz reply immediatly..iam new to wf.

Hi ,
Pls let me know more details about the drawings process.
Are we talking about Engineering Drawing release using CV01N / CV02N transaction ???
Regards
Ajay

Similar Messages

  • How to reverse service order which is in released state

    Hi,
    Please guide me how can we reverse a service order which is in released state.
    Is it possible to reverse a service order with released state?
    Please guide it is very urgent.
    Thanks and Regards
    Edited by: MPVash Vash on Dec 5, 2008 10:04 AM
    Edited by: MPVash Vash on Dec 5, 2008 10:06 AM

    Hi,
    a delivery suspension due to non-payment can just be released via an incoming payment.
    You could also manually do this be setting the end date of the suspension, but I would not advise that. As I currently do not have system to check I'm not sure whether you could use ISM_SALES_ORDER_CHANGE, but you can try via the where-used list of structure JKSI_SUSPEND which needs to be used in this case.
    Tim

  • Workflow error in release Purchase requisition

    Hi All,
    I configured the settings for workflow in Purchase Requisition.(both purchsing & task specific )
    Now, my workflow is started but its status is Error.
    actually it is not able to find the recepient in role 20000026.As i already mark relevent release code as 1 & also assign US user id in the PR release settings & also put the User ID in task specific customization.
    Still i am facing this error.One thing i want to mention is i am not aware of the settings required in the Edit Qrganizational Plan tab in SPRO.
    If some more clarification is required ,i will prode the same..
    Plz suggest some solution in this regard with T codes & bit detail.
    Thanks & Regards,
    Sandeep Sharma

    Sandeep,
    Okay here's some details which will help you out. I presume that you have done customizing for PR release strategy.
    If not then follow this procedure:
    http://help.sap.com/saphelp_47x200/helpdata/en/04/92761846f311d189470000e829fbbd/frameset.htm
    Once you establish release strategy , event releasestepcreated will automatically created by system based on release codes.
    so say for a standard pr type you have defined two release codes I1 and I2 (based on certain amount- you can see this in class characterisitic using tcode CL02) and class type -032 and class PR_RELEASE most probably, check Char. tab).
    Once you define char. in CL02, you gotta run tcode CT04, give the name of char. and fill all tab.
    inside tab Addl data, you have to define CEKKO table and field too
    this is where we have referenced the event releasestepcreated implicitly.
    FOR all customizing of release strategy check this link , this is really great blog
    http://www.sap123.com/forumdisplay.php?s=cced678eca43fe7a7e3bb9b83dc94022&f=2
    then search for "setting up simple release procedure" thread in it.
    It is for PR.
    So if I1 release take place event will triggered, say A has approved I1 level and for whole PO release I2 is also required then one more time event releasestepcreated event would be triggered.
    You can create workflow for PO release. Approver are determined based on rule AC20000026 (check in PFAC) based on FM  which has user exit EXIT_SAPLEBNF_001 where you can write down your own code for approver determination.
    I think that you gotta put 9 (in release code settting in SPRO). If you are inserting 1 then you have to define US and user name (which I think you have done).
    Hope it will clear your doubts
    Cheers
    Jai

  • Workflow in the releasing of Credit blocked sales orders.

    Hi All,
    My Client requirement is that they need workflow in the releasing of credit blocked sales orders.
    If once sales order is blocked then it should be approved at 3 levels, then only it should be released.
    Suggestions are highly appreciated 
    Regards,
    Kumar

    Hi Kumar,
    I think you can achieve this by using Authorization Concept.
    Please find the below link
    http://help.sap.com/saphelp_nw04/helpdata/en/52/671285439b11d1896f0000e8322d00/content.htm
    Authorization levels for Credit Rep Groups
    Thanks
    Dasaradha
    Edited by: dasaradha ramireddy on Nov 28, 2011 12:53 PM

  • Error in event receiver in workflow for PO release strategy

    Hi Expert,
    I am trying to trigger an email through workflow for PO release. I have setup following
    In SWETYPV,I have check marked on Type linkage active and Enable event queue. Status no error.
    In PFTC, under Triggering events, Object type BUS2012 is green light
    When i create the PO in my SAP inbox, i get notification, however, i getting this error u201CERROR IN EVENT RECEIVER".
    Also, how can i send the notification to the user's outlook inbox? Your help will be appreciated.

    laurarice wrote:
    Hi Expert,
    >
    > I am trying to trigger an email through workflow for PO release. I have setup following
    >
    > In SWETYPV,I have check marked on Type linkage active and Enable event queue. Status no error.
    > In PFTC, under Triggering events, Object type BUS2012 is green light
    > When i create the PO in my SAP inbox, i get notification, however, i getting this error u201CERROR IN EVENT RECEIVER".
    > Also, how can i send the notification to the user's outlook inbox? Your help will be appreciated.
    I suppose, you are using the workflow WS20000075. Add sending email as an additional task to the same workflow in SWDD.

  • Jobs are going to released state after the PC triggers with user event.

    HI BI experts,
    We are facing issue with event scheduler using user event in the process chains. Some Jobs are not starting immediately with the event and reaching release state. These released jobs are never starts in near future. Also cannot start manually due to event periodic jobs.
    No log is availble in SM61 due to settings.
    Please let me know your suggestions and this issue.
    Regards,
    Mohan.

    HI BI experts,
    We are facing issue with event scheduler using user event in the process chains. Some Jobs are not starting immediately with the event and reaching release state. These released jobs are never starts in near future. Also cannot start manually due to event periodic jobs.
    No log is availble in SM61 due to settings.
    Please let me know your suggestions and this issue.
    Regards,
    Mohan.

  • Scheduled jobs are in released state only

    Dear Experts,
    we shedule jobs in background periodically. But for a particular time, all scheduled jobs are in released state only. Please suggest what might be the issue. Even some SAP std jobs have have not started.

    Hi Raghavendra,
    Have you checked enough BTC work process available in your SAP system.
    Use SM65 transaction,goto =>Additional Tests ;check mark "Determine work process status" and "Determine no of jobs in queue"
    and see the test results for any problems.
    Best Regards,
    Shyam Dontamsetty

  • Business Workflow for PR Release...

    Hi Experts,
    Can anybody please tell me how to work with BUSINESS WORKFLOW for PR Release from scratch.
    I am new in Workflow and i had tried with myself but not getting exactly.
    Please reply me with step-by-step process from scratch to release PR.
    thanks in advance..

    Where did you get stuck? All the steps needed could be found in the customizing and the customizing documentation explains them. Also make sure you have done the workflow configuration in SWU3.
    Regards,
    Martin

  • Workflow in PR Release

    Hi All,
    is it Possible to have both standard workflows ( item wise Release, Overall release ) For Puchase Requistion?
    Since already we are working with Overall release PR and Again we need item wise Release For Certain Items .Please
    Suggest Me ........
    Regards
    Mike.

    Thanks Every body !
    I ll work on the Same Procedure...........
    Regards
    mike.

  • Workflows stuck in "Starting" state.

    Workflows have been running fine for awhile.  All workflows are currently stuck in a "Starting" state.  Was finally able to capture this in ULS
    03/20/2014 11:58:23.46  w3wp.exe (0x15AC)                        0x2A98 SharePoint Foundation        
     Workflow Infrastructure        72fv Unexpected AutoStart Workflow: System.ArgumentException: Value does not fall within the expected range.     at Microsoft.SharePoint.Workflow.SPWorkflowActivationProperties..ctor(SPWorkflow
    workflow, String initiationData, Object context)     at Microsoft.SharePoint.Workflow.SPWorkflowManager.StartWorkflowElev(Object context, SPWorkflowAssociation association, DateTime elevationTimeUtc, SPWorkflowEvent startEvent, SPWorkflowRunOptions
    runOptions)     at Microsoft.SharePoint.Workflow.SPWorkflowAutostartEventReceiver.<>c__DisplayClass1.<AutoStartWorkflow>b__0(SPSite superUserSite, SPWeb superUserWeb) 
    Any ideas?
    TIA

    Hi Milo,
    Please check whether you have installed any CUs for SharePoint 2010.
    Please install June 2013 CU or higher for SharePoint 2010, compare the result.
    Here are some similar posts for you to take a look at:
    http://blogs.msdn.com/b/chaun/archive/2013/05/16/if-your-sp2010-workflows-are-stuck-in-the-starting-state.aspx
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/5a6e6e83-b59f-4099-a86f-a07723ff2b98/workflow-stuck-in-starting-state-after-applying-sharepoint-2010-cu-december-2012?forum=sharepointadminprevious
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Can we test and use ES from workplace with release state : "Restricted"

    Hi folks,
         I need a ES for my Composite Application, I have previously tested few ES from ES workplace.
    But I need to access another ES (for canceling a SO) :-
          http://esoadocu.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE04284687BEBDF19515001A64D3F462&id=BCF1F938AC4F11DB2B24000F20DAC9EF
    But the release state of this ES is : Restricted.
    Please let me know the authorizations I have on this ES, if I can access/test it from ESWorkPlace.
    Currently I get the message stating that the ES is not released.
    Cheers
    --- Brian

    961469 wrote:
    rjamya wrote:
    I am suspecting this is a tkprof issue, analyzing the same trace file via orasrp doesnt show this behavior. Also the high physical reads shown are missing in the raw trace file.Im not so sure, I can see it in the raw trace file.
    do you see it in raw trace file? if so can you post the STAT line showing high disk read (pr=nnnnnnnn) values ? I dont see it in the trace file that i generated.
    Raj

  • How to retrigger workflow after complete release

    Hi All
    I have configured workflow for PO release.My query is that suppose I complete the PO release through workflow and then through ME22N I change the Quantity/Value such that a new release strategy is captured by the same PO.Now how do I retrigger the worflow for the same PO according to new release strategy.

    Hi,
    Using the T.code SWUE you can re-trigger.
    Follow the steps to trigger the workflow via Event.
    1) Goto the T.code SWUE.
    2) Object category = BO BOR Object Type
    3) Object Type = Business Object (e.g. BUS2089,..).
    4) Object Event = which event you want to trigger (e.g CREATED,..)
    5) Click on Object Key button & enter the key field value(s)
    6) There is a button 'Event Parametersu2019. Click on that to enter the event parameter values, if any
    7) Then you have to click 'Event Receiver' button, and you can see which Workflow is linked to this event
    8) Now click on 'Create Event' to trigger the event.
    9) Then  Go to SWEL and see the Event.
    Regards,
    Surjith

  • Problem in Workflow on Budget Release

    Hi Experts,
    I have created Workflow on Budget Release . in which as soon as Budget is Released for Respective WBS Element Workflow Will Trigger . My Problem is that if Budget Gets more than 1 crore then in Mail it only shows first Digit , it is not showing whole value . So what Changes should i do so that it can display full Value if it is more than 1 crore .
    Please Help me on this issue .

    Hi- Are you able to see exact value (1 crore +) in WF log. If yes, then check the content of the email body where exactly you are using this container and try to align for test purpose. Also check the binding from WF to task (in mail step) and check for the data types in both the container
    If WF log shows only first digit, then check where this value is getting populated and check for data types
    Are you using Send mail step or FM or class approach for sending mail?
    Vinoth

  • Retrigger Workflow if PO Release Strategy changes

    Hi All
    I have configured workflow for PO release.Now through work item if I am deleting a line item of the PO such that PO is capturing new release strategy due to change in PO value then workflow does not gets re-triggered again as per new release strategy.How can I achieve this?
    Edited by: satish kumar on Apr 18, 2009 9:13 AM

    Hi,
    For Creation it working fine right, i.e. Event triggering fine
    1) After Changing the PO, save it
    2) And tell functional consultant, whether they configure for the settings for PO change in SPRO
    Regards,
    Surjith

  • Workflows remain in starting state

    There is a production sharepoint site and qa sharepoint site. The workflows were made and tested in the qa site. I then made templates of all the list associated and added them to the production sharepoint site. After that I recreated all the workflows because
    they were list workflows, and set them to go off when an item is created. However when ever an item is created all the workflows remain in a starting state and no amount of time changes it, for I still have a workflow starting from 2 days ago. What do I do
    to resolve this problem? As well this will all made using SPD 2010 and sharepoint 2010

    Hi,
    see whether these links helps you -
    http://blogs.msdn.com/b/chaun/archive/2013/05/16/if-your-sp2010-workflows-are-stuck-in-the-starting-state.aspx
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/5a6e6e83-b59f-4099-a86f-a07723ff2b98/workflow-stuck-in-starting-state-after-applying-sharepoint-2010-cu-december-2012?forum=sharepointadminprevious
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

Maybe you are looking for