Urgent - Workflow (WF14000133)
Hello
We use SRM Server5.5(Classic scenario)
We implemented BBP_WFL_APPROV_BADI for WF14000133
But agent is not assgined. When i check the workflow log using swi1, there is no agent. System show the message " all users can process this task", when i click the agent button.
And all users received the work item, even if they are not correct approver.
I found a lot of notes to solve this problem.
923463 BAdI n-step approval - Container inconsistent for 1st step
901068 BAdI Workflows: Enhancement of Note 896556
898768 BADI Workflow: Determining current approvers
909871 Error in BAdI workflow without approval
903015 BAdI Workflows: Events and parallel steps
894978 APPROVERLIST container element has incorrect approver status
870391 Programming for the BAdI workflow
910612
784408 Item approval: Rejected items in BADI
We have SRM server 5.5 and SP07.
Should i apply these notes? Or is there any solution?
Next week, we will take the 1st integration test.
Could you give me a solution or tip?
Thank you
Best Regards
SH
Hi So Hee Lee,
If the shoe fits! I'd most certainly apply the notes to the test system if they are applicable and match the problem description. I'd also test with the standard BADI before i go editing it. As your on such a high prod/support pack level, shouldnt these notes already be in the system??
Just make sure that your rules are correct. Check with help.sap.com
Hope this helps,
w
Similar Messages
-
Urgent : Workflow with two steps
Hi All,
i am doin a workflow in which i am using a activity step first to display the PO/SO and then a user decision step for either approving or rejecting it.
bt once the activity step (work item in SAP inbox) is executed, the workflow is terminated.
the user decision step is not executed.
can anyone assist how can i make both step work synchronously?
Thanks in advance.it is difficult to understand the issue. I request you to just do Business Business Object binding from Wflow to task in the decsion step. By doing that you will get the link of the PO/SO and you can use the decision also.
By the way are the present task in sequential fashion. I dont think so. It appears they are in a fork of 2 parallel branch and 1 necessary branch wich should not be the case change it 2 necessary branch
Thanks
Arghadip -
Urgent : Workflows for Purchase Order
hi,
My requirement is to make workflows for creation of Purchase Order.i,e Whenever a PO is made in the system,one mail should be sent to the concerned person for approval.I came across object type BUS2012 which is for Purchase Order but it's event list does not contain for "creation".How to approach for the same or any other solution.
Thanks and Regards,
GauravHi,
Standard Workflow for Purchase Order is WS20000075(Access it via PFTC_DIS Tcode). The business Object for Purchase order is BUS2012(access it via SWO1 Tcode).
http://help.sap.com/saphelp_47x200/helpdata/en/75/ee153f55c811d189900000e8322d00/frameset.htm
Regards
Kiran Sure -
URGENT : Workflow for Vendor Bid
Hi all,
Hope everyone is doin fine out there..
We are having a workflow issue for the Vendor Bid...
We have activated the event linkage for the Vendor Bid..
WS79000010 (No approval required) and deleted all the start conditions for this bus. obj (BUS2202)..
The vendor as a bidder is able to submit his bid.. and once this bid is accepted the status is alwayz awaiting approval...
is there any way we can inactivate the awaiting approval...bcoz in BBP_PD i see for this vendor bid the awaiting approval is not marked inactive....
or do we have to maintain anything in the org structure..
Thankz in advance
Regards
Manoj A.Hi Yann,
SRM_SERVER 500 0008 SAPKIBKS08
we are in testing now.. we did not run into such problems on the dev system..
and in my inbox we get an error..
Workflow WS79000010 not activated
Not activated due to:
9999999999 E Workflow definition '' not in version ''
Further results of syntax check:
9999999999 I The container element Initiator is written, but not read or exported
0000000104 W Data may be lost in assignment between type 'CHAR255' and 'WFSYST-ACT_AGENT'
Correct the error either here in the local system or in source system
and then transport it again
appreciate someone looking into this..
not sure if this is a config issue..
Regards
Manoj -
Urgent: Workflow for travel plan approval
Hi all, can anyone tell me is there any standard workflow for travel plan approval??
also let me is there any standard workflow for plant maintenance??
thanks in advance
with regards,
RajCheck this out....
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d5/202038541ec006e10000009b38f8cf/frameset.htm
-Pinkle -
Urgent : Workflow Query...
Hi,
I have created one workflow by using the BOR BUS2021.
here the Request id is Key field .
i have created the 5 methods for this object with the customer name space(Y).
when i am binding the from workflow to step.the request id is not appearing in the workflow container. is there any work need to be done before the binding .
my workflow should start after executing the transaction(FIBLFFP).how can i achieve this.?Hi manjunatha,
You need to create a Container element in the workflow container of object type BUS2021 and also make sure that Task container has the same element of object type BUS2021...
Note: A container element is already created with the same object you used in the Task
Let me know if this helps.
Thanks & regards
Srinivas -
URGENT: Workflow Journal Batch is cancelled ,but record is in "IN PROCESS"
Hi Gurus,
I am facing issue with "Journal Batch" workflow notification with Find apprrover node. I just cancelled the workflow and trying with another journal entry, even workflow status is cancelled ,but journal record at journal form still showing "IN Process" status. I need this record as cancelled at form also, Am I missing some steps or I have to delete this record by API? Please help.
Thanks,
ShishirHello,
I am also facing the same issue. But i was wondering why was the journal in canceled status in the first place. Is it being done automatically by the workflow or does the user go and cancel it?
We do a datafix on those records to fix it. We change the status to 'R' as stated above and then the user can open the journal, unreserve the funds and then delete it. -
Urgent - workflow - drawing in release state
hi friends..
I have one issue.
The drawing is in release status howewer it is stuck in workflow because
in the background it is trying to go from IW to IR.The workflow does not state
how or when the drawing was released...
so at the movement what can i do..
just restart an workflow or anyother else..
plz reply immediatly..iam new to wf.Hi ,
Pls let me know more details about the drawings process.
Are we talking about Engineering Drawing release using CV01N / CV02N transaction ???
Regards
Ajay -
Hi,
In workflow administrator responsibility -> developer studio, I am trying to run the workflow process but I am not getting the run option. Where has I was getting the same previously.
Can anyone tell me what might be the reason and how to resolve it?
Thanks in advance for any help.Hey
Instead of
it_container-element = 'PH.PRODUCTHI'.
it_container-value = vtext-prodh.
it_container-TAB_INDEX = '001'.
it_container-ELEMLENGTH = '018'.
it_container-type = 'C'.
append it_container.
clear it_container.
try
it_container-element = 'PH'.
it_container-value = vtext-prodh.
it_container-TAB_INDEX = '001'.
it_container-ELEMLENGTH = '018'.
it_container-type = 'C'.
append it_container.
clear it_container.
I cannot check it by myself as this is not a standard SAP object.
The other way is to pass the value into the "simple" variable. The same as you pass value to the VTEXT variable. Then you can pass this value as a parameter to the method PH->Display. In this scenario you should do this method Instance-independent - this way you won't need an instance of the PH object.
I assume that in the Display method you will be able to show this Product Hierarchy using the Product Hierarchy key given in the parameter.
Rgds
Mat -
Urgent - workflow stopped today
Hi guys,
We are using WS20000077 and WS20000075, both have been working fine until today. All of a sudden, when users create PR and/or PO, they can't see them in their Outbox, there's no notification to the approvers. I checked SWDD, the latest version are still both active, in SWEL, all events are triggered, event linkages are still active. What could be the problem here?
Many thanks,
KathrynIs the customizing still correct - SWU3
What happened to the workflows by viewing the log SWI1
Check if the system log shows what caused this, somthing like tablespaces are full
Check ST22 for shortdumps
Check if someone changed the org structure or authorizations
If you´ve done the above and the problem still persists, you can create an oss message with prio High (if this is in a production environment)
Kind regards, Rob Dielemans -
Hi everyone,
I have landed a job this Saturday however it is different to what i am use to, i will explain my requirements and hopefully someone here will have the best solution.
On Saturday I am going to a cheerleading comp and both myself and another photographer will be required to do the following -
1. One person takes shots, comes back to the stand and gives the other the memory card and goes back out shooting
2. The person at the desk then has to get look at the photos on the memory card, discard the crap shots and then import them with specific numbered titles (example first batch will be photo 1 - photo 80) From there one of us will then export the photos into a folder on the desktop
3. Those photos will then be placed through iwatermark to be marked and saved onto an external HDD.
4. The external HDD will then have the contents transferred onto one of two computers set up on plasma screens that will run a slideshow with that file name under them so on the day people can order the photos
My question is how do i do this efficiently through aperture at the start and number them as I import the photos remembering that there will be multiple imports through the day and they all need labeling?
Any help or advise is welcomed.
Thank you
JoshuaIf it was me, I would create a folder in Aperture that will be used for all of the photos from the event. Then inside the folder, create a Project for each card you import. Do not worry about editing or renaming before you import. Get the photos into Aperture and then use Aperture's tools to edit out the bad shots. Then starting with the first Project, do this:
*A. RENAME THE FILES*
1. Select all of the photos in the Project.
2. From the menu, go to METADATA > BATCH RENAME
3. From the "Version Name Format" dropdown menu, select "Edit"
4. Now select "Custom Name With Counter"
5. Enter something like "Cheerleading" in the subject area and the number 1 in the increment counter. If you think you will have over 1000 photos for the event, I would use 4 for the number of digits.
6. Click OK for the File Naming dialog box and OK for the Batch Change dialog box.
7. All of the photos in the Project will be renamed like this: Cheerleader0001, Cheerleader0002 and so on.
*B. EXPORT PHOTOS*
If not selected, select all of the photos in the Project and export them to your designated location by going to FILE > EXPORT > VERSIONS and using "Version Name" as the name format.
*C. NEXT PROJECT*
For the next Project (which you created for the next card imported), go through the same process: import all photos, edit out bad ones, select all remaining in that Project, rename them and export. This time when renaming, be sure the increment counter starts where you left off in the previous project.
Clicking on each Project will show you just the photos in that Project. Clicking on the folder containing all of the Projects will show you all of the photos for the entire shoot. When doing that, select the sort order to be based on "Version Name" and you will see all of your photos in order.
Good luck with the event!
Dan -
Hi All,
I have activated "WS79000010"- No approval required for vendor bid and maintained the required start conditions for this workflow, but when the vendor submits the bids the system throws an error that " No approval workflow found. Inform system administrator".
We are using SRM 5.0 with SP09
Any inputs on this issue are highly appreciated.Hi,
Please check your starting conditions.There seems to be some problem with that as the system is unable to identify the workflow to be triggered.
Also see teh foll note and related threads for more pointers;
Note 865269 - Bid: Incorrect workflows, incorrect approval preview
Re: Err "No workflow found" while creating bid
Re: URGENT : Workflow for Vendor Bid
Re: Urgent: Quotation Workflow: Message Approval WF is ambiguou
BR,
Disha.
<b>Pls reward points for useful answers.</b> -
Urgent help needed in inserting data into a custom table in oracle WorkFlow
Hi
I am trying to get data from the WF and insert into a custom table..
I read that workflow procedures WONT allow commits...
Oracle Workflow will not support autonomous commits in any procedure it calls directly. If you need to perform commits, then embed your SQL in a subprocedure and declare it as an autonomous block. This subprocedure must be capable of being rerun. Additionally, note that Oracle Workflow handles errors by rolling back the entire procedure and setting its status to ERROR. Database updates performed by autonomous commits cannot be rolled back, so you will need to write your own compensatory logic for error handling
Have anyone did this..
Please give me some idea ...It is urgent
I am getting data using getitemattribute..and try to insert it into a custom table
thanks
kpPl do not post duplicate threads - insert dont work in Workflow
Srini -
Urgent Help needed in loggin to Workflow designer
Hi there,
I have a written a program from which a workflow get triggered automatically. The programs runs file in my machine. When i deploy it in my server machine it doesn't work. The server machine has a sandbox installed. But my machine doesn't have a sandbox. I have installed all tools separately in my machine.
When i run my application in the server machine the following error comes:
java.lang.reflect.UndeclaredThrowableException
at $Proxy1.login(Unknown Source)
at com.adobe.workflow.client.QLCSessionImpl.login(QLCSessionImpl.java:11
6)
at TriggerWorkflow.main(TriggerWorkflow.java:50)
Caused by: java.io.InvalidObjectException: inauthentic principal assertion
at com.adobe.idp.Context.getValidatedAuthResultFromAssertion(Unknown Sou
rce)
at com.adobe.idp.Context.readResolve(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at java.io.ObjectStreamClass.invokeReadResolve(ObjectStreamClass.java:92
5)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1
655)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:324)
at java.rmi.MarshalledObject.get(MarshalledObject.java:135)
at org.jboss.invocation.jrmp.interfaces.JRMPInvokerProxy.invoke(JRMPInvo
kerProxy.java:136)
at org.jboss.invocation.MarshallingInvokerInterceptor.invoke(Marshalling
InvokerInterceptor.java:67)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.
java:46)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:5
3)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessi
onInterceptor.java:100)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:85)
... 3 more
com.adobe.workflow.client.QLCException: Login failed, or you do not have permiss
ions to login to this application
at com.adobe.workflow.client.QLCSessionImpl.login(QLCSessionImpl.java:12
6)
at TriggerWorkflow.main(TriggerWorkflow.java:50)
I am seriously bugged by this error. I am giving the correct user name and password but still the error comes. I dont know how to solve this. This might be some small settings change. But i am not sure. Also when i try to connect the workflow designer through Eclispe in that server machine, even there the login failure message still comes.
Can anyone please advise on this as it is very urgent.
SurajHi Suraj
Since you're getting this with Workflow Designer as well as your code, it doesn't look like it's anything with your code.
It looks very much to me like you're specifying an invalid username and/or password.
- Can you log into fm or adminui using the same username and password?
- Can you log in to either Workflow Designer or your custom application using a different username and password?
- Does your username or password contain non-USAscii characters?
One thing I have seen is where there is a user in LDAP whose login name is "administrator". This can conflict with the LiveCycle local "administrator" account, and prevent you from logging in.
I hope this is of some help...
Howard
http://www.avoka.com -
Urgent: Issue in Automatic workflow Customizing.
hi,
Can someone please help me with this issue in Automatic workflow customizing ( SWU3)
When I try to execute the step
Maintain Runtime Environment > Schedule Background Jobs with missed deadlines
I get the error message saying
"Output Device "" not known"
Can someone help me how to resolve this? This is very urgent for me.
Regards,
Sam KThe guidelines tell you not use the word urgent in your message title, so please don't. Personally I try to not answer such questions until at least one day has passed, giving you some time to cool off and perhaps solve the problem on your own.
I can't recall seing this message myself, but my guess is that either your user or the user WF-BATCH (if the job is being scheduled with that user) has a default printer (output device) that is not defined in the system.
Maybe you are looking for
-
Virtual cube with services after copy system from PRD to SBox
Hi I have problem. The Virtual cube 0FIGL_VC1 with FM "RS_BCT_FIGL_DATA_GET_VC1" works well on PRD but not on SBox. I think, i did everything on SBox in t-code SM59, WExx. Infopackages load data from connected (not R3-PRD but R3-SBox) system perfectl
-
how can I restore a back up of an old iphone to a new iphone (after I accidentally started a "new" iphone name?
-
What is the reasons when the traplog messages occur
i have configed two css11506 act as active-backup mode. and there are three real servers supplying web service are through one vip address for clients.when one server is down ,the clients complain that the webpage is opening very slow even not opened
-
Installation of Config: All in one best practice
Hi, I have download the Config: All in one doc from SAP service market place. After extracting what I see is the *.SAR files. can anybody guide how to use and install. DP
-
I think I have a virus on my iphone 4S. I received a text from an "Unknown" number and now my phone is going crazy! I will touch a number and it will take me to my contacts and doing all sorty of crazy things like that. What shoudl I do?