Urgent : Workflow with two steps

Hi All,
i am doin a workflow in which i am using a activity step first to display the PO/SO and then a user decision step for either approving or rejecting it.
bt once the activity step (work item in SAP inbox) is executed, the workflow is terminated.
the user decision step is not executed.
can anyone assist how can i make both step work synchronously?
Thanks in advance.

it is difficult to understand the issue. I request you to just do Business Business Object binding from Wflow to task in the decsion step. By doing that you will get the link of the PO/SO and you can use the decision also.
By the way are the present task in sequential fashion. I dont think so. It appears they are in a fork of 2 parallel branch and 1 necessary branch wich should not be the case change it 2 necessary branch
Thanks
Arghadip

Similar Messages

One job with two steps - how to create one single spool?

Hello experts,
I have created two queries in SQVI. One is based on the table BSIK, the other on on BSAK.
The report layout is the same in both queries.
Now I schedule one job in SM36/SM37 with two steps corresponding to my queries.
I want my second step to append the spool created in the first step. Is that possible?
In order to do this I unchecked "New spool request" in the request attributes for the second step of the job.
I use the same printer, the same format (X_65_80), but it doesnt work.
The help on the field says
".... name, output device, number of prints and the format must match..." - What "name" do they mean?
"In addition, the existent spool order must not already be competed. This can occur if a spool is released for output...." - I use "send to SAP spooler only" option, is that what thay mean? How cen you have an "uncompleted spool" in the job.
If anybody knows ho to do this (without development!), please advise
Best regards,
Fatima

Hi,
Please do following steps :
1. Go to transaction code SM36
2. Do as per below screen shots
You can see Job steps is empty
Click on (Check and Save)
Next Screen
You can see one step created
Click on Create
You can see above it is showing as Step 2
Give again program name and variant
Click on (Check and Save)
You can see two steps are created
Go back (green arrow)
You can see know SAP is showing 2 Step(s) successfully defined which was earlier blank
Click on
Next Screen
Now schedule job as per your requirement.
Prerequisite create variants for both the programs as we need to mention the same .
Hope, this solves your issue else revert.
Regards,
Tejas

Gmail won't work in Mail with two step verification.

I have been hacked several times with google's email service by people in China and I decided to try their two step verification to add some security. But when I try to add the account on my mac mail list it says that it is offline and the app specific password doesn't work. I have changed the app specific password three times and all of them don't work. Please help!

Eliminate Mail by testing in Postbox and MailMate. Both have demos.
http://www.postbox-inc.com/
http://freron.com
If you cannot set an app specific password for these apps then the problem is with your account. It's difficult to actually get Gmail support so your best option might be to delete this account. Set up a new account with two step authentication immediately.
You also have other options for getting a free email account. Set up an Apple iCloud email or get an Outlook.com (previously Hotmail.com, Live.com, MSM.com).
Whatever you do you need to do the two step authentication.

Approval WorkFlow with custom steps

Hi guys,
I need to create, using SPD, a simple workflows with this Outcome step
Accepted e Approved so, for example If I have these users in My WF
UserA, UserB
I want that UserA change the WF step to Accepted and then UserB close the WF with Approved.... is it possible?
thanks!
Sergio

Hi Brampurnot,
I have created supplier via create Supplier via workflow from a custom supplier type which has workflow attached to a custom phase. After creating the Supplier and when it was in Created phase I found supplier in My supplier workflow Activities
under For manual Phase change. Then when I changed phase to the Approval attached phase, I found the supplier in the channel for the approver attached at that phase.Then after when the Approver approved the supplier , the supplier was visible in the "search supplier" to me!.. Hope it helps regarding the Supplier workflow..
And coming to registering through Form I thought you might be mentioning Supplier registration at Buy Side! .
Supplier Self registration seems not to be enabled yet on my application , so I dint have idea that it exists. Would let you know if I can try that scenario.
Regards,
Uday

Workflow with two machines

Just wondering how people out there manage working from two machines. I have an MBA that I take on the road and use when I'm sick of my office and want a change of scenery. And, I work on an iMac at my home office.
I'm new to Aperture, and am wondering how people work between a laptop and desktop. How do you sync up files? My MBA hard drive is obviously small, so I'd like to just just keep some core photos on it or maybe even just my most recent photos to work with along with a few older albums.
Any suggestions or techniques for workflow and syncing between machines?

Although various user workarounds exist, the issue of synching your laptop Library with your desktop Library has not (yet) been addressed by Apple. IMO Apple's failure (still) to address this key issue is a travesty; Apple's single-user Filemaker has had that capability since the 1980's.
I suggest going to "Provide Aperture Feedback" under the Aperture menu and requesting that Apple provide single-user synch capabilities for two Libraries (such as the laptop/desktop setups that you and I both have). Note that it is important to specify single-user, two-Libraries, because multi-user scenarios are entirely different solutions that - unlike single user solutions - are usually very complex and expensive.
Laptop drives are now available with up to 500 GB capacity, so you may want to consider upgrading the size of your internal laptop drive and using the removed stock drive for backup in an external case. In addition to added speed, the extra internal drive space can allow temporary internal storage of Referenced Masters while in the field if that is desired; or for help with whatever workaround Library-synch methodology is chosen.
Some workarounds include
• Exporting total projects that include Masters from your laptop Aperture for usage on your desktop Aperture.
• Keeping a single Aperture Library on a large external hard drive, and moving the external hard drive among computers. Obviously not ideal for portability, and substantial slowdown usually occurs because in most cases connection is by some method much slower than SATA. New Macbooks with their limitation to only USB are the worst.
I ask that Aperture users with two Macs go to "Provide Aperture Feedback" under the Aperture menu and advise Apple of our need for single-user synch of two Libraries.
Thanks!
-Allen Wicks

HT5577 Devices and Recovery ID stolen. Unable to access account with two-step verification. Apple does not care. What can I do?

Last year, my backpack containing my laptop and phone were stolen. My Recovery Key was saved as a screenshot on the laptop and on the phone and I have no other copy. I remotely wiped both devices. I had no insurance for such circumstances and replaced them at my own expense but I cannot access my AppleID account because Two-Step Verification is active and my old telephone number was replaced and I no longer have access to it. I can live with losing the devices as a result of my own stupidity, but Apple claims they are unable to restore my access to my old account in spite of the special circumstances. Apple can confirm my identity via my bank details and my email address but they do not seem to care. I've lost access to my music, software, calendars etc. I have a new AppleID - I had no other option but to set one up - but it irks me that Apple is unwilling to transfer purchases made on my old AppleID to my new one. I am considering taking legal action to regain my purchases and wonder if anybody else has found themselves in a similar situation.

If apple tracked deviced they sold they would be violating a great number of privicy laws and would face class action and criminal lawsuits in most of the western countries

Ios8 upgrade with two step verification

I have and iPhone 5 and two step verification in place. When I first upgraded to iOS 8 the upgrade process asked for my verification number. I first chose iPhone, but I did not get a code. I then went back and selected SMS to the phone number that I was upgrading. Then the upgrade went though without me entering anything. I'm assuming that iOS 8 just read my SMS message and went through with the upgrade. I'm about to do the same with my daughter's (she has her own Apple ID and two step verification) iPhone 4s and I assume that it will work the same way?
I could not find any detailed information on Apple's web site pertaining to this.

Hi Les,
If you've been asked to wait, I would try going back through the process to start two-step verification as described here:
Apple ID: Frequently asked questions about two-step verification for Apple ID
http://support.apple.com/kb/HT5570
Set up two-step verification at My Apple ID (appleid.apple.com):
Select "Manage your Apple ID" and sign in.
Select "Password and Security."
Under Two-Step Verification, select Get Started and follow the onscreen instructions.
That article also explains why you had to wait, in case you were at all curious:
Why was I asked to wait before setting up two-step verification?
As a basic security measure, Apple does not allow two-step verification setup to proceed if any significant changes have recently been made to your account information. Significant changes can include a password reset or new security questions. This waiting period helps Apple ensure that you are the only person accessing or modifying your account. While you are in this waiting period, you can continue using your account as usual with all Apple services and stores.
Apple will send an email to all the addresses you have on file notifying you of the waiting period and encouraging you to contact Apple Support if you think that someone else has unauthorized access to your account. You will be able to return to set up two-step verification after the date listed on your Apple ID account page and in the email that you receive.
Note: When your waiting period is over, you will have 30 days to complete two-step verification setup. If you attempt to complete setup after 30 days have passed or if you have made significant changes to your account during that time, another waiting period may be triggered.
Take care, Les!
- Ari

Is there a flaw with two step verification?

hello all,
apologies if if this is posted in the wrong community. I couldn't see a community associated with security.
So, am I going mad?
i have setup 2 step verification/authentication with my apple id. I have nominated 2 mobile phones and my iPad. If I am using my ipad, and I for instance sign into icloud.com, I am asked to choose a device to send a verification code to. If I choose my iPad, then the code is popped up on screen in front of the icloud login. I then continue to login by entering the verification code.
mmmh. Does this not feel strange? I feel this is a little flawed..
lets say someone manages to get my iPad and successfully unlocks it. They could open safari, navigate to icloud.com, Safari automatically enters the credentials - my email and appleid password, and then asks me to choose my iPad for the verification code. Oh Deary me.
Yes, I understand they need to go through all these steps, successfully unlock the ipad, etc., etc.. But my point being, the registered device I am using to access the apple service (e.g. My iPad), should not be listed as a valid device to receive the verification code even if it's listed as a registered device. What should happen is only the 2 mobile phones I have registered are eligible to receive the verification code (When I am using my iPad), and are the only 2 available options.
IF I were to use my iPhone for instance to access apple services, then this iPhone is omitted from the available registered devices to receive the verification code and then my iPad and the other mobile phone are listed.
hope this makes sense.. Grateful for a discussion. Am I correct in saying this shouldn't be possible?
thanks
paul. Aka Aminuts

Closing thread as posted on iPhone discussion.
https://discussions.apple.com/message/26750074#26750074

Mail app and google account with two step verification fail

Hi,
I try to add my gmail account to Mail app, but it says that login or password is incorrect. I'm using google 2 step verification, that means that I should generate an app-special password each time I use a new application with this google account. I've generated the password for gmail app and logged in successfully, but it doesn't work for Mail app (each application has it's own password).
iOS 5.1.1 (9B206).
Gmail app v. 1.2.7182
Thank you in advance.

Аnonym wrote:
I've read every discussion about that problem, though I found no solution there. So I started another one.
I'm sorry. You misunderstood what I was saying - or perhaps I should say that I said it wrong. I meant that I was unfamiliar with this problem - that's all that I meant.
The link for 4.0 is simply for iPads that are running iOS 4.0 or higher. That is what the link refers to. This is copied from the website
Note: These setup instructions are for Apple devices running software version 4.0.
View instructions for older software.
It does not state it specifically, but it means 4.0 or higher. Google hasn't updated anything further for higher than iOS 5 that's all.
But if you checked it out already or don't want to check it out because you think it doesn't apply - that's your prerogative.
EDIT - your problem was solved as soon as I posted. Glad you got it all worked out!

BOM Workflow with two levels of approval

Hi All,
I am working on BOM workflow. my requirement is, when ever a BOM has changed before updating the database it should be approved by 2 approvers. The changes should be updated to the database whenever the final approver approves the changes.
I found the BO type BUS1080 but I dont find any related events here.
Is this requirement is feasibel or not?
If so can anybody please help me how to complete it?
Thank you.
Regards.
Ranganadh

answered

[solved] Google online account with two-step verification

After upgrade, I can no longer log in to my gtalk account on empathy. The Online Account dialogue box gives the error "Expired credentials. Please log in again". But repeated log in comes back to the same message. Anyone experiencing similar problem?
Last edited by mathfeel (2012-11-15 19:42:38)

I realize this is marked as solved, but as none of the fixes worked for me, I figured I would put what I did to solve the problem.
https://bugzilla.gnome.org/show_bug.cgi?id=688364#c2
In this thread, comment 10 gives instructions for using an application specific password instear of the regular google password that seahorse is storing. I did this, logged in, and everything started working, with no errors. Hopefully this will help someone else looking for an answer.
Ivan [reporter] 2012-11-15 16:39:40 UTC
However I found a way to fix, thanks @Ionut showing a path
In my GOA_ entry I edited 'password' field
So I removed my generic google password and inserted google application
password, I got in my 2-factor authentication page. So it's working fine now,
but it should be fixed I think ti work out of box
Ivan [reporter] 2012-11-20 03:20:38 UTC
(In reply to comment #20)
> Use Seahorse to look at your keyring and try to locate the entry associated
> with your Google account. (Hint: You can put "GOA" in the search bar to filter
> the view to show only things stored by GOA.)
>
> You will see that it has a dictionary. Locate the key called "password".
> Replace the value associated with that key with your application specific
> password.
Yes. Check the show password, you'll see a long GOA_ string. At the end you'll
see your google password. If you enable 2-factor auth and reproduces a bug, you
should make an application password in google account and replace your google
password in seahorse with it. Logoff and login again after solves the
"expiration" problem

TS1702 The keyboard layout is critically wrong, that does not allow quick writing. Users reach the numbers with two step keyboard hits (forward and back). It is really vital to have number 0-9 keys in the default keyboard window. Develop these changes ple

I want to open a discussion about keyboard layout on iPAD´s, including the best one iPAD4. How one can design such sofisticated technical item for diverse work/activity, includes mainly for note writings and meetings, but the writing procedure is so slow becuase of the keyboard layout. It is really crucial to solve this problem in order to avoid developing additional keyboard from third-party developers. This function has to be integrated, namely: TO HAVE A COMPLETE SEETING OF LETTERS AND NUMBERS IN THE DEFAULT KEYBOARD LAYOUT, FOR EFFICIENT WRITINGS.
WHAT YOU THINK ???

This is an iPad user to user forum. Apple doesn't read or respond. You can make a suggestion.
Send feedback to Apple.
http://www.apple.com/feedback/ipad.html
I bought a case with a bluetooth connected keyboard. Much easier to use than the on-screen keyboard if you do a lot of typing. You can use many/most computer wireless keyboards with the iPad.
 Cheers, Tom

Sharepoint Designer - Two step List Workflow task item is not changing the status from not started to Complete

Hi
Using SPD i am creating list workflow.
Scenario: Employee submits a request . Task assign to manager. Manager can either approve/ reject. If approve then change the state column to "done". If rejected the state column to "Rejected".
Problem is "Assign a to do item" is assigning the task to manager. But after manager approves the status in the task list not changed to "Completed". Still it is showing "Not started". I dont want to manually complete the task.
Please help me for automatic process.
What i should do to change the status to "Complete" automatically after manager approval
Regards
Jhanani
Janani.R

Hi Janani,
From your description, you would like to create an approval workflow for a list. When an employee submit a request to the list, an approval task should be assigned to manager, then manager could approve or reject the request. From the request list,
we should be able to see the Approval task’s status.
Not understand the reason of designing the workflow to two steps, an approval action should be enough from my understanding. For producing, I create a list named Request list, then customize it in InfoPath form to add a Request field for stating request
content. Then add a workflow to list named Approval task, add the action of Start an approval process with administrator and make the workflow automatically start when item is added.
The image below shows the status of Adding items, Approving and Rejecting. Please check if it could meet your requirement.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

How do you get the two step security to work with virtual machines running under parallels?

I use Quickbooks running on a virtual PC under Parallels. I have always have Quickbooks interface with Thunderbird on the PC side to email invoices to customers using my apple email account.
Once I switched to two-step verification security, Apple doesn't recognize the "new" computer trying to access my mail account, but it also doesn't send any kind of code to a second device to authorize the access.
For now, I've had to switch back to the traditional security and the above process immediately works again 9without asking me any security questions).
Is there a way to have Apple recognize the virtual PC (or any other non-Mac computer) with two-step verification security?

You have to go to your Apple ID and generate application specific passwords.
Apple ID - Manage

Workflow with images,file names and full captions.

I am working on my mother's memoirs, which will include a block of photo pages. Those pages will be laid out by a friend. I would like to use a contct sheet of some kind as a reference to what is to be included with what caption but am discovering just how difficult PE8 Organizer is to work with.
First I tried the obvious print contact sheet and discoverd that captions are truncated if they run wider than the image itself.
Secondly I tried a photo book and found that large images do not automatically resize to fit the picture placeholders. Seemed to pick up full caption but I have too many pictures to manually fit.
Third I tried a web page output but then captions can't be copy and pasted for inclusion into group caption panels!
Then it occurred to me that even just a list of file names and captions would be sufficient ... but even that is too much for an Adobe catalog to give up!
All I want is a reference to images and captions, ideally grouped 4 at a time per page as they will be shown in those picture pages.
Any suggestions would be welcomed.

I can see two ways to do what you want.
The first one is to divide you workflow in two steps. Install the free software FastStone image resizer, which can do a batch to resize and put your caption where you want. Batch process the files in a new folder while renaming them with something like 'old name'+ 'resized'. This is to avoid duplicate names. Import them into the organizer. Create an album with all those files, and put them in the correct printing order. Select all and export 'as new files' renaming them with 'common base name', in original format. That should keep the custom order of your project.
There are also batch renaming and resizing with the affordable Elements+ add-on, but I suppose the first solution will be easier.

Urgent : Workflow with two steps

Similar Messages

Maybe you are looking for