URGENT yahoo download attachment name is being changed by Safari

Every time I download an attachment from yahoo mail (PDF or Jpg, word, etc.) , my computer automatically changes the name of the document to "securedownload#_". It further loses any attachment extension associated with the attachment which at times makes the attachment unreadable. This problem just began 10 days ago. I am experience this on both my new mac laptop (OS X 10.4) as well as my iMac (OS X 10.3) . How can I remedy this?

Yahoo probably made a change to their web mail page that conflicts with Safari. Check your Safari preferences in the Security area. Next to Web Content, are Enable Java and Enable JavaScript checked?
Have you tried using FireFox or Camino, to see if the problem exists in another browser?

Similar Messages

MacBook Pro name is being changed by adding ()

MacBook Pro name is being changed by adding () after the name and incrementally increasing the number in (). I am using Yosemite. I cannot determine what causes the number to be increased, but I am at 13 after resetting it this morning. This prevents my iOS devices from syncing wirelessly as they are looking for a different name. I have reset the name several times and this continues to occur.
I first noticed this issue during the Yosemite beta and reported it as an issue.
Has anyone else experienced this issue and found a solution?

I had this happen also. I reset my router and the problem stopped.
regards

Downloading attached zip file from emails using safari

How to download, and where will be the downloaded attached zip file in email be stored using safari? How to open and save the zip file attached to the email? Do you need an app to open and store the zip file?

The app GoodReader (I don't know if there are any free apps that can also do it) can be used to zip and unzip email attachments
press and hold the zip file in your email - after a couple of seconds you should get a popup, with one option being 'Open in GoodReader' which you should select
GoodReader should then open with the zip file listed under My Documents
select Manage Files on the right-hand side of GoodReader, select the zip file, and touch the Unzip button that appears on the right
You should also be able to download zip files directly into GoodReader by typing the URL in its Wed Downloads sectio.

ICloud email name not being changed

Every time I send an email from my computer or iCloud.com it goes out with my old name in the "from" box. I updated my name associated with my apple id a couple years ago but iCloud has never made the change and it is becoming a bother. Any suggestions?

Mail Preferences > Accounts, select the account then the Account Information tab and change the alias to whatever you want to use.

HT5616 my friend give me his apple id that i use to download apps and then i change the email add and name but i cant change the password. now i update my ios now its asking for the id and password for icloud... i cant open the yahoo id coz its deleted

my friend give me his apple id that i use to download apps and then i change its email add name and address.. now i update my iphone ios then now its asking for i cloud id and password but when i open the email add for that account its been dissabled because its been long time not used... what can i do to activate my iphone???

Please only post one time per issue. Answered in your other post.

Change attachment name using mail adapter

Hi All,
I have a problem changing the attachment name in my scenario. I use Mail scenario to send a pdf Attachment from R/3 to email address. Everything working fine except the attachment name that becoming untitled.pdf and untitled.txt.
Communication Channel setting :
message protocol : xipayload
transport protocol : smtp
checked use mail package
checked keep attachment
I have use MessageTransformBean in my receiver adapter, but no luck. It was produce an error.
anyone have an idea to solve my problem?
thx,
Robby

Hi,
You need to go to the Module tab of the Mail adapter receiver communcation channel and give the parameter as Transform.contentDisposition and its value as attachment ( since you needed the output to be sent as an attachment) and give the name of the attachment as you required.
Please see the help page : [http://help.sap.com/saphelp_nw04/helpdata/en/57/0b2c4142aef623e10000000a155106/frameset.htm] for more details and more options of the parameters.
Regards,
Kalpana.

Problem: Original Attachment Name from SOAP Sender changes to attachment-1

Hi everybody,
we have a scenario where a SOAP sender receives a xml message describing several documents. Each document has a mime type and a file name, size, md5 checksums etc as attributes.
The documents are send as attachments with the same Web service in SWA(SOAP with attachment style).
The web service calls an ABAP proxy provider class in a R/3 backend.
The ABAP proxy class will save the attached documents for further processing and must use the original document names.
At the soap communication channel monitoring(Java Stack) we still see the original attachment names in the message content tab.
At the Integration Server(sxmb_moni) the attachment name changes to attachment-1, attachment-2 and so on.
Using the method
IF_AI_ATTACHMENT ->GET_DOCUMENT_NAME
in the provider ABAP proxy class returns the name attachment-1.
We can see that there is a mapping of the new attachment-1 name to the old, original name in the manifest section of this message on the Integration server.
Is there a way to access the manifest section at a provider ABAP proxy class? Or otherwise a PI configuration setting to preserve the original attachment names.
Thanks a lot,
Heiko
=> PI 7.1 SP9

Hi Stefan,
(I was hoping you would find that thread ...)
I see a good reason why the attachment names are changed as the PI message protocol sends the main document as an attachment as well. So no problem with that because the information of the mapping old to new names still exists in the manifest part and is visible at the sxmb_moni.
We see a manifest part like this (Sorry cant post the whole xml doc as the formatting for longer messages isn't working in the forum)
<SAP:Payload xlink:href="cid:4cc43edd-839f-423f-b7c6-7e44294d663a_sig.p7m">
<SAP:Name>attachment-1</SAP:Name>
<SAP:Description>attachment</SAP:Description>
<SAP:Type>ApplicationAttachment</SAP:Type>
</SAP:Payload>
The (red) cid entry is the original file name. This manifest is from the sxmb_moni in the r/3 backend. So all the information is there.. The question is how to retrieve this information .. Any idea?
Best Regards,
Heiko Bergmann

Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

*Ralph Johns* writes:
"Your options are:
Get a trial account form @mac which will work as an iChat name after the 60 days run out but not be a email account that is valid (And is free)"
Do you mean a trial account from .Mac? (DotMac)
"Get an AIM Screen name and set it to Display what you want as you set it up.
The Screen name can be whatever yu want but you can also set it to display something else as well."
I had thought about this, but it seems other people have already chosen the screen name "pinksharkmark" and virtually every variation of it I can think of. So that isn't an option for me. As for getting it to display something else as well, do you mean that if I were to get an AIM screen name like "CromulentCat" I could somehow log in to iChat under the AIM account "CromulentCat" yet get iChat to represent me to my Buddies as "PinkSharkMark"? Because I have to admit I don't see how that can be done. It appears as if iChat displays to anyone chatting with you precisely the account name you logged in under and nothing else. So if you logged in using a .Mac account, then you are displayed as "[email protected]" while if you logged in under an AIM account, you are displayed as "CromulentCat". But that's it that's all... there is no way to change CromulentCat to PinkSharkMark.
Thanks very much for taking the time to reply, though.

Me32K - Need to change the mail subject line, attachment name

Hi,
can u please throw light on the below three points which needs to be achieved.
1. Subject line of the mail needs to be modified from standard to "PO# XXXXXXXXXX".
2. Attachment name should be updated from stanadrd to "PO_XXXXXXXXXX".
3. Also by default mail will be delivered to the default id, but it should be delivered to multiple mail ids maintained in the vendor master.
I should achieve the above by user exits or by Zprogram copying from th standard.
Please advise me.
Thanks a lot.
Regards,
Kiran

check in Tcode: NACE, what is the current driver program and form against your document type.
and then change accordingly

Change the attachment name while sending PO as mail..

Hi,
I’m able to send PO Form through mail using NACE, configuration for output type.
But my Attachment name is always showing as ‘Print Data‘.
My requirement is to change the attachment name as below.
Program: SAPFM06P
Script: Z_SD_PORDER
Please help on this issue.
Thanks in advance.
Regards,
Kumar

I didn't find any field with PACKING_LIST in program 'SAPFM06P'.
If we create the copy of 'SAPFM06P' kindly let me know where I need to change the same..
in form entry_neu using ent_retco ent_screen.
the below is the code.
*   INCLUDE FM06PE02                                                   *
form entry_neu using ent_retco ent_screen.
   data: l_druvo like t166k-druvo,
         l_nast like nast,
         l_from_memory,
         l_doc   type meein_purchase_doc_print.
   clear ent_retco.
   if nast-aende eq space.
     l_druvo = '1'.
   else.
     l_druvo = '2'.
   endif.
   call function 'ME_READ_PO_FOR_PRINTING'
        exporting
             ix_nast        = nast
             ix_screen      = ent_screen
        importing
             ex_retco       = ent_retco
             ex_nast        = l_nast
             doc            = l_doc
        changing
             cx_druvo       = l_druvo
             cx_from_memory = l_from_memory.
   check ent_retco eq 0.
   call function 'ME_PRINT_PO'
        exporting
             ix_nast        = l_nast
             ix_druvo       = l_druvo
             doc            = l_doc
             ix_screen      = ent_screen
             ix_from_memory = l_from_memory
             ix_toa_dara    = toa_dara
             ix_arc_params = arc_params
             ix_fonam       = tnapr-fonam          "HW 214570
        importing
             ex_retco       = ent_retco.
endform.
Kindly give the clear view.

Change e-mail attachment name dynamic in Broadcaster

Hi,
I want to send an e-mail to multiple recipient by the setting "e-mail bursting" in broadcaster. Each e-mail has an attachment (pdf-document).
Is it possible, to change the name of the attachment dynamic, when sending the mail to the different recipients (example:
recipient 1: recipient1.pdf,
recipient 2: recipient2.pdf,
and so on)
I tried a solution with text variables, but it didn't work.
Regards,
Tim Jaschik

Hi,
thanks for your fast answer. But my problem is to change the attachment name of the e-mail, not to schedule the e-mail.
So, is there no possibility to control the process which creates the attachment name?
Regards,
Tim

E-mail Attachment Name Changes

I have a following problem with mail attachments: When I drag the attachment from my mail window onto my desktop, the attachment name changes to "unknown". So for example, "cat.jpg" would become "unknown.jpg". To make this a bit more complicated, the problem is a bit random and from this it follows that sometimes the file keeps the original and correct file name and sometimes it changes it. Also, this problem occurs only when I drag the attachment (which normally is image) from email window, but if I pull the attachment from above the message window, where it has a little arrow and it shows all the attachment icons, this problem does not happen. I am running Tiger and Mail 2.1. It would we really great if you could take a sec to answer this if you have any idea at all what this problem might to be. Thanks!
Best, Rauno

Hi Rauno, and a warm welcome to the forums!
Hmmm, since it's random, might try this...
Quit Mail, then In your home folder, try moving this +folder & file+ to the Desktop then reboot...
First, Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these files to the Desktop.
/Users/YourUserName/Library/Caches/Mail
Move to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
You can always move them back if it doesn't help.

Change PO Email Attachment Name

Hi Guys,
I've implemented SAP Note 191470 to change the subject line and the attachment name to contain the PO number. I was successful in changing the subject line but not the attachment name. Currently, the attachment name is defaulted by SAP to 'Print data'.
In the note, it states:
Note that the values from the mail title are used to create the description for the attachment.
I've maintained the mail title in the condition record for the output type on the 'Communication method' tab page in the 'Cover Page Text' field but to no avail. I'm probably missing a step.
I did my due diligence by searching the internet but I haven't found any solution.
Any help would definitely be appreciated. <removed by moderator>
Thanks in advance,
Derick
Message was edited by: Jürgen L

Have a look into this KBA it is listed under FI, but you can try if the same solution would work for you too: 1702035 - How to change the attachment name in the mail for correspondence

Urgent - download attachment like hotmail does?!

in javamail how to download a attachment?
i plan to
first: get the multipart from the message, and get the inputstream instance of it
sencond: make a new file,get the outputstream of it then wirte to the new file.
but i think in most mail services, people can rename the attachment file and then save it in the local disk as hotmail does.
how to implement that: a link which show the attachment's name( i can do this) then click to the link, a file dialog will pop up and user can save the file by whatever name.( i have no idea about it) then make the new file and save it( i can do this)
so any suggestion will be welcome. and thanks your help first.
best regards

How to download attachment file from server to the user's client ?
I mean what i want to do is -
i show file name as hyperlink . Now when user clicks on the filename's link , the save file dialog should open and when user clicks on save button in file-dialog, the file should be saved on local disk.
Thank you.
chirag0A
Thank you.
chirag

Quicken data file names are mysteriously being change on my iDisk

within the last couple of days my Quicken data file names are mysteriously being change on my iDisk which seem to make them inaccesable. Not sure why this is happening

within the last couple of days my Quicken data file names are mysteriously being change on my iDisk which seem to make them inaccesable. Not sure why this is happening

URGENT yahoo download attachment name is being changed by Safari

Similar Messages

Maybe you are looking for