Urgently need help for parsing IP header

Hi, could anyone tell which class I should use to parsing the IP header of a packet?
Thanks many many times!

> Hi, could anyone tell which class I should use to
parsing the IP header of a packet?
DatagramPacket?
> Urgently need help for parsing IP header
Don't flag your question as urgent, even if it is for you.
* We all answer questions here voluntarily, in our leisure time. We do that because doing so is fun for us, because we enjoy helping people and having interesting discussions. Guess what, it is much less fun if it gets stressful. So the last thing you want to do to get us to answer your question is to pass your stress over to us.
* People who are stressed and want a fast answer often don't even find the time to do the necessary research or to formulate their question in an easy to comprehend way. That's even less fun to work with. So you really don't want us to feel your stress. Instead you want to take your time to write a well formulated post that is fun to answer. The less likely it is for us to know that your question is urgent, the more likely you are to get a fast answer!
* The simple notion that you want your post to be answered faster than those of the other members might feel rather unfair to some of us. Doubly so because often "urgent" questions actually are homework questions. Yours might be different, but someone who had bad experiences with this type of question might not read far enough to notice.

Similar Messages

Urgent : Need help in parsing XML from Sharepoint and save it into DB

Hi ,
I am Sharepoint guy and a newbie in Oracle . PL/SQL
I am using UTL_DBWS Package to call a Sharepoint WebService " and was sucessfull , Now the xml has to be parsed and stored into a Table. I am facing the issue as the XML has a different namesoace and normal XPATH query is not working
Below is the XML and need help in parsing it
declare
responsexml sys.XMLTYPE;
testparsexml sys.XMLTYPE;
begin
responsexml := sys.XMLTYPE('<GetListItemsResponse xmlns="http://schemas.microsoft.com/sharepoint/soap/">
<GetListItemsResult>
<listitems xmlns:s="uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882" xmlns:dt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882" xmlns:rs="urn:schemas-microsoft-com:rowset" xmlns:z="#RowsetSchema">
<rs:data ItemCount="2">
<z:row ows_MetaInfo="1;#" ows__ModerationStatus="0" ows__Level="1" ows_Title="Test Title 1" ows_ID="1" ows_owshiddenversion="1" ows_UniqueId="1;#{9C45D54E-150E-4509-B59A-DB5A1B97E034}" ows_FSObjType="1;#0" ows_Created="2009-09-12 17:13:16" ows_FileRef="1;#Lists/Tasks/1_.000"/>
<z:row ows_MetaInfo="2;#" ows__ModerationStatus="0" ows__Level="1" ows_Title="Testing Tasks" ows_ID="2" ows_owshiddenversion="1" ows_UniqueId="2;#{8942E211-460B-422A-B1AD-1347F062114A}" ows_FSObjType="2;#0" ows_Created="2010-02-14 16:44:40" ows_FileRef="2;#Lists/Tasks/2_.000"/>
</rs:data>
</listitems>
</GetListItemsResult>
</GetListItemsResponse>');
testparsexml := responsexml.extract('/GetListItemsResponse/GetListItemsResult/listitems/rs:data/z:row/@ows_Title');
DBMS_OUTPUT.PUT_LINE(testparsexml.extract('/').getstringval());
end;
The issue is with rs:data , z:row nodes.... please suggest how to handle these kind of namespaces in Oracle
I need the parse the attribute "ows_Title" and save it into a DB
this script would generate "Error occured in XML Parsing"
Help is appriciated, thanks for looking

SQL> SELECT *
FROM XMLTABLE (
          xmlnamespaces ('http://schemas.microsoft.com/sharepoint/soap/' as "soap",
                         '#RowsetSchema' AS "z"
          'for $i in //soap:*//z:row return $i'
          PASSING xmltype (
                     '<GetListItemsResponse xmlns="http://schemas.microsoft.com/sharepoint/soap/">
<GetListItemsResult>
<listitems xmlns:s="uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882" xmlns:dt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882" xmlns:rs="urn:schemas-microsoft-com:rowset" xmlns:z="#RowsetSchema">
<rs:data ItemCount="2">
<z:row ows_MetaInfo="1;#" ows__ModerationStatus="0" ows__Level="1" ows_Title="Test Title 1" ows_ID="1" ows_owshiddenversion="1" ows_UniqueId="1;#{9C45D54E-150E-4509-B59A-DB5A1B97E034}" ows_FSObjType="1;#0" ows_Created="2009-09-12 17:13:16" ows_FileRef="1;#Lists/Tasks/1_.000"/>
<z:row ows_MetaInfo="2;#" ows__ModerationStatus="0" ows__Level="1" ows_Title="Testing Tasks" ows_ID="2" ows_owshiddenversion="1" ows_UniqueId="2;#{8942E211-460B-422A-B1AD-1347F062114A}" ows_FSObjType="2;#0" ows_Created="2010-02-14 16:44:40" ows_FileRef="2;#Lists/Tasks/2_.000"/>
</rs:data>
</listitems>
</GetListItemsResult>
</GetListItemsResponse>')
columns ows_MetaInfo varchar2(20) path '@ows_MetaInfo',
         ows_Title varchar2(20) path '@ows_Title',
         ows__ModerationStatus varchar2(20) path '@ows__ModerationStatus'
OWS_METAINFO         OWS_TITLE            OWS__MODERATIONSTATUS
1;#                  Test Title 1         0
2;#                  Testing Tasks        0
2 rows selected.

URGENT **** Need help for JAX-RPC Web Service Proxy deploy to OC4J 10.1.3.5

Hi everyone!
I’m really new to web services.
I’m getting a *500 internal server error* while deploying my JAX-RPC web service Proxy to an Oracle AS, in an OC4J, v. 10.1.3.5.0.
Running my client from my development environment (*jdeveloper 10g, 10.1.3.5.0*) everything functions correctly: from jdeveloper I can contact and use the web service defined by the following endpoint: https://www.medialibrary.it/services/federaMLOL.asmx?WSDL
I created a "try_ws_client.jsp" file that runs correctly from my local development environment jdeveloper (that uses an embedded oc4j, v. 10.1.3.5.0) but fails when run from the test server (Oracle AS, in an OC4J, v. 10.1.3.5.0), getting, as I mentioned a 500 internal server error, a white page in IE but with FF the message says: The’s an error in the servlet .....
Here's how I created the ws proxy and how I’m using it to consume the ws I mentioned.
1. I used the jdeveloper “Create Web Service Proxy” wizard (File > New > Business Tier > Web Services > Web Service Prox) and in the WSDL document URL I put: https://www.medialibrary.it/services/federaMLOL.asmx?WSDL
2. The operation ended without adding nothing to the web.xml file and creating the proxy files. One of them is: FederaMLOLSoapClient.java that have the WS exposed methods (es: public boolean createUser(String) ) + a “main” method with the example how to use this client to consume the WS.
public static void main(String[] args) {
try {
it.reggiocity.provincia.mlol.proxy.FederaMLOLSoapClient myPort = new it.reggiocity.provincia.mlol.proxy.FederaMLOLSoapClient();
System.out.println("calling " + myPort.getEndpoint());
// Add your own code here
} catch (Exception ex) {
ex.printStackTrace();
3. In FederaMLOLSoapClient.java I’ve create the method "tyIt":
public String tryIt(String username) {
try {
it.reggiocity.provincia.mlol.proxy.FederaMLOLSoapClient myPort = new it.reggiocity.provincia.mlol.proxy.FederaMLOLSoapClient();
if(myPort.createUser(String username)) {
return “O.K”;
} else {
return “K.O”;
} catch (Exception ex) {
// logs error
4. I created my try_ws_client.jsp file that creates FederaMLOLSoapClient object and calls the tryIt method, printing the “OK” or “KO” message.
<%@ page import="it.reggiocity.provincia.biblioreggiane.*"%>
<%
String message = "";
FederaMLOLSoapClient obj= new FederaMLOLSoapClient( );
message = obj.tryIt(“AAAAAA70R10H226H”);
%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<%@ page contentType="text/html;charset=windows-1252"%>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252"/>
<title>prova</title>
</head>
<body><%=message%></body>
</html>
The situation is:
My try_ws_client.jsp runs correctly from my jdeveloper and the user is created while creating app.ear and deploying it to my Oracle AS/OC4J as mentioned above, I get a 500 Internal Server Error.
Any idea to find a solution to this problem?
Please help.
Take care.
John M.

Hi,
you want to build the Web Service, or you want to consume the Service as a client? If the latter, Web client (ADF?) or Java client?
Frank

Urgently need help with this

Hi!!
I urgently need help with this:
When I compile this in Flex Builder 3 it says: The element type 'mx:Application' must be terminated by the matching end-tag '</mx:Application>'.
but I have this end tag in my file, but when I try to switch from source view to desgin view it says, that: >/mx:Script> expected to terminate element at line 71, this is right at the end of the .mxml file. I have actionscript(.as) file for scripting data.
This is the mxml code to terminate apllication tag which I did as you can see:
MXML code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundGradientAlphas="[1.0, 1.0]" backgroundGradientColors="[#007200, #000200]" width="1024" height="768" applicationComplete="popolni_vse()">
<mx:HTTPService id="bazaMME" url="lokalnabaza/baza_MME_svn.xml" showBusyCursor="true" resultFormat="e4x"/>
<mx:Script source="dajzaj.as"/>
<mx:states>
<mx:State name="Galerije">
    <mx:SetProperty target="{panel1}" name="title" value="Galerije MME"/>
    <mx:SetProperty target="{panel2}" name="title" value="opis slik"/>
    <mx:SetProperty target="{panel3}" name="title" value="Opis Galerije"/>
    <mx:AddChild relativeTo="{panel1}" position="lastChild">
    <mx:HorizontalList x="0" y="22" width="713.09863" height="157.39436" id="ListaslikGalerije"></mx:HorizontalList>
            </mx:AddChild>
            <mx:SetProperty target="{text1}" name="text" value="MME opisi galerij "/>
            <mx:AddChild relativeTo="{panel1}" position="lastChild">
                <mx:Label x="217" y="346" text="labela za test" id="izbr"/>
            </mx:AddChild>
            <mx:SetProperty target="{label1}" name="text" value="26. November 2009@08:06"/>
            <mx:SetProperty target="{label1}" name="x" value="845"/>
            <mx:SetProperty target="{label1}" name="width" value="169"/>
            <mx:SetProperty target="{Gale}" name="text" value="plac za Galerije"/>
        </mx:State>
        <mx:State name="Projekti"/>
    </mx:states>
<mx:MenuBar id="MMEMenu" labelField="@label" showRoot="true" fillAlphas="[1.0, 1.0]" fillColors="[#043D01, #000000]" color="#9EE499" x="8" y="24"
         itemClick="dajVsebino(event)" width="1006.1268" height="21.90141">
       <mx:XMLList id="MMEmenuModel">
             <menuitem label="O nas">
                 <menuitem label="reference podjetja" name="refMME" type="check" groupName="one"/>
                 <menuitem label="reference direktor" name="refdir" type="check" groupName="one"/>
              <menuitem label="Kontakt" name="podatMME" groupName="one" />
              <menuitem label="Kje smo" name="lokaMME" type="check" groupName="one" />
             </menuitem>
             <menuitem type="separator"/>
             <menuitem label="Galerija">
                 <menuitem label="Slovenija" name="galSvn" type="check" groupName="one"/>
                 <menuitem label="Nemčija" name="galDeu" type="check" groupName="one" />
             </menuitem>
             <menuitem type="separator"/>
             <menuitem label="projekti">
                 <menuitem label="Slovenija" name="projSvn" type="check" groupName="one"/>
                 <menuitem label="Nemčija" name="projDeu" type="check" groupName="one" />
                 <menuitem label="Madžarska" name="projHun" type="check" groupName="one"/>
             </menuitem>
         </mx:XMLList>
         </mx:MenuBar>
    <mx:Label x="845" y="10" text="25. November 2009@08:21" color="#FFFFFF" width="169" height="18.02817" id="label1"/>
    <mx:Label x="746" y="10" text="zadnja posodobitev:" color="#FFFFFF"/>
    <mx:Panel x="9" y="57" width="743.02814" height="688.4507" layout="absolute" title="Plac za Vsebino" id="panel1">
        <mx:Text x="0" y="-0.1" text="MME vsebina" width="722.95776" height="648.4507" id="Gale"/>
    </mx:Panel>
    <mx:Label x="197.25" y="748.45" color="#FFFFFF" text="Copyright © 2009 MME d.o.o." fontSize="12" width="228.73239" height="20"/>
    <mx:Label x="463.35" y="748.45" text="izdelava spletnih strani: FACTUM d.o.o." color="#FBFDFD" fontSize="12" width="287.60565" height="20"/>
    <mx:Panel x="759" y="53" width="250" height="705.07043" layout="absolute" title="Plac za hitre novice" id="panel3">
        <mx:Text x="0" y="0" text="MME novice" width="230" height="665.07043" id="text1"/>
        <mx:Panel x="-10" y="325.35" width="250" height="336.61972" layout="absolute" title="začasna panela" color="#000203" themeColor="#4BA247" cornerRadius="10" backgroundColor="#4B9539" id="panel2">
            <mx:Label x="145" y="53" text="vrednost" id="spremmen"/>
            <mx:Label x="125" y="78" text="Label"/>
            <mx:Label x="125" y="103" text="Label"/>
            <mx:Label x="0" y="53" text="spremenljivka iz Menuja:"/>
            <mx:Label x="45" y="78" text="Label"/>
            <mx:Label x="45" y="103" text="Label"/>
        </mx:Panel>
    </mx:Panel>
    <mx:Label x="9.9" y="10" text="plac za naslov MME vsebine" id="MMEnaslov" color="#040000"/>
     </mx:states></mx:Application>

I know it's been a while but… did you fix this?
It looks to me like you are terminating the <mx:Application> tag at the top. The opening tag should end like this: resultFormat="e4x">, not resultFormat="e4x"/> (Remove the /).
Carlos

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

Need help for Format HD

Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help

Jesus:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• _Where available_ +Click on Options button+
+• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
+• Click OK+
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
cornelius

Need help for my requirement...

Need help for my requirement...
Hello Experts,
I have report where users can input the company, housebank, account ID and posting date.
Now in one column of my report named 'Cash in Bank', I need to get all postings from cash
accounts with GL code ending in '0'. Now, I know that I can get the amounts in BSIS/BSAS
but how do I link it with the proper bank and account?
For example:
                   Cash in Bank
Bank A
Account ID 1     1,000,000
Account ID 2     25,000,000
Hope you can help me guys. Thank you and take care!

hi Viraylab,
each house bank you can find in table T012, in T012K you'll find the bank accounts to the housebank, the G/L account will be in T012K-HKONT.
hope this helps
ec

Need help for flash builder

i need help for flash builder 4 and papervison 3d. I need to create a slider with it ranges of value from 10 to 50 to adjust the camera values for the camera.fov and also need to create it for the yaw of the object from 0 to 360. I try to look for any slider event and classes in this program but cant find any, btw, i need to use the AS only project file.
here is my codes:
can you please tell me how i should modify the codes?
package
    import flash.display.BitmapData;
    import flash.display.Sprite;
    import flash.events.Event;
    import org.papervision3d.materials.BitmapFileMaterial;
    import org.papervision3d.materials.BitmapMaterial;
    import org.papervision3d.objects.primitives.Sphere;
    import org.papervision3d.view.BasicView;
    [SWF (width="800", height="600", backgroundColor="0x000000",frameRate="30")]
    public class EarthBitmap extends BasicView
        private var sphere:Sphere;
        public function EarthBitmap()
            super(800 , 600);
            var earthmaterial:BitmapFileMaterial = new BitmapFileMaterial("../assets/Earth.jpg");
            sphere = new Sphere(earthmaterial,100,20,18);
            camera.fov = 25;
            scene.addChild(sphere);
            addEventListener(Event.ENTER_FRAME,rotateSphere);
        public function rotateSphere(evt:Event):void
            sphere.yaw(0.2);
            singleRender();

Turn the click handler into a full on separate function. Then store all the views in an array and use Math.rand() to randomly choose one.
Something like this:
<fx:Script>
     <![CDATA[
          var questionsArray:Array = {question2,question3,question5,questionRed,questionGeography};
          function buttonClickHandler(event:MouseEvent){
               var randomProblem:int = Math.floor(Math.random()*(questionsArray.length));     //generates a random integer between 0 and the total number of questions in the array (arrays are 0-based)
               navigator.pushView(questionsArray[randomProblem]);
     ]]>
</fx:Script>
<s:Button id="randomProblemButton" label="Next Problem" click="buttonClickHandler(event)" />
Haven't tested that, but something along that line should work

Need help for importing oracle 10G dump into 9i database

hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower version database. But i'm badly need help for importing the dump...
or
someone please tell me the site to download oracle 9i Developer suite as i can't find it in oracle site...

I didnt testet it to import a dump out of a 10g instance into a 9i instance if this export has been done using a 10g environment.
But it is possible to perform an export with a 9i environment against a 10g instance.
I am just testing this with a 9.2.0.8 environment against a 10.2.0.4.0 instance and is working so far.
The system raises an EXP-00008 / ORA-37002 error after exporting the data segments (exporting post-schema procedural objects and actions).
I am not sure if it is possible to perform an import to a 9i instance with this dump but maybe worth to give it a try.
It should potentially be possible to export at least 9i compatible objects/segments with this approach.
However, I have my doubts if this stunt is supported by oracle ...
Message was edited by:
user434854

Need Help for Nokia 6500 slide

Hi all I'm A new Guy here ,
But I do really need help for hard reset my phone
I already try *#7073# But It doesn't work ,
If Anybody know to make a hard reset please help

rwss wrote:
I'v got te same problem with my 6500 Slide, is there a button combination that we have to press
to hard reset the 6500 Slide?!
How does the 6500 slide hard reset?
That's simple.
All you have to do is:
From MENU goto SETTINGS, When there scroll down and select 'Restore Factory Setting'.
There are two options in there:
"Restore Settings only"
and
"Restore all"
Select "Restore All"
When done the phone will delete every thing on the Phone memory(C:\)(contacts,picture,messages etc)
and also restore phone to its original settings and will restart.
This proceedure is mostly common on S40 phone.
Hope this explain and solve the problem.

Need help for publishing web intelligence document (universe) into InfoView

Post Author: mirage
CA Forum: Publishing
Hello all,
I need help for publishing web intelligence document (universe) into InfoView.
can't find this information in Business Objects Designer's Guide and in Business Objects Administrator Guide.
Can somebody give short instructions how can I do it?
Regards, Slava

If the change between the 2 types of data has to happen dynamically during run time them
1. Use 2 dataproviders
a. Current
b. Historic
2. Merge the 2 dimensions
3. Use Webi variable to switch between the measure of the current and historic universe
Ex if [year] < 2010 then historic.[expense] else current.[expense]
Hope this helps,
Divya

Need help for access list problem

Cisco 2901 ISR
I need help for my configuration.... although it is working fine but it is not secured cause everybody can access the internet
I want to deny this IP range and permit only TMG server to have internet connection. My DHCP server is the 4500 switch.
Anybody can help?
         DENY       10.25.0.1 – 10.25.0.255
                          10.25.1.1 – 10.25.1.255
Permit only 1 host for Internet
                10.25.7.136 255.255.255.192 ------ TMG Server
Using access-list.
( Current configuration )
object-group network IP
description Block_IP
range 10.25.0.2 10.25.0.255
range 10.25.1.2 10.25.1.255
interface GigabitEthernet0/0
ip address 192.168.2.3 255.255.255.0
ip nat inside
ip virtual-reassembly in max-fragments 64 max-reassemblies 256
duplex auto
speed auto
interface GigabitEthernet0/1
description ### ADSL WAN Interface ###
no ip address
pppoe enable group global
pppoe-client dial-pool-number 1
interface ATM0/0/0
no ip address
no atm ilmi-keepalive
interface Dialer1
description ### ADSL WAN Dialer ###
ip address negotiated
ip mtu 1492
ip nat outside
no ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication pap callin
ppp pap sent-username xxxxxxx password 7 xxxxxxxxx
ip nat inside source list 101 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 10.25.0.0 255.255.0.0 192.168.2.1
access-list 101 permit ip 10.25.0.0 0.0.255.255 any
access-list 105 deny   ip object-group IP any
From the 4500 Catalyst switch
( Current Configuration )
interface GigabitEthernet0/48
no switchport
ip address 192.168.2.1 255.255.255.0 interface GigabitEthernet2/42
ip route 0.0.0.0 0.0.0.0 192.168.2.3

Hello,
Host will can't get internet connection
I remove this configuration......         access-list 101 permit ip 10.25.0.0 0.0.255.255 any
and change the configuration ....      ip access-list extended 101
                                                            5 permit ip host 10.25.7.136 any
In this case I will allow only host 10.25.7.136 but it isn't work.
No internet connection from the TMG Server.

Need help for cenvat reversal

Hi Friends,
Need help for cenvat reversal.
Reversed MIRO by MR8M & MIGO by 102 movement but not able to post & cancel cenvat by J1IEX.
In table J_1IEXCHDR status = "P" and J1I5 does not update for document of 102 movement because reversal document of MIGO, i.e. material document with 102 movement type does not have excise tab. MBSM-Cancelled Material Documents, does not show any of the material documents.
Want to reverse the cenvat credit, please help.
--Anil Bhamere

Hi,
If I select Cancellation in MIGO then there is only Material Document option.
In MIGO Purchase Order option shows for Goods Receipt, Goods Issue and Subsequet Adj.
In this case I have been selected Goods Receipt option followed by purchase order number by which original goods receipt MIGO was created, selected 102 movement type and from line item respective MIGO document. The reversal document created successfully where as original MIGO document does not show in cancelled document list. When post option selected from J1IEX and entered vendor excise number then message appeared as No Part I exists for availing credit in excise invoice xxxxx.
If Cancel option selected from J1IEX and entered vendor excise number then message appeared as Excise invoice xxxx has already been posted for vendor xxxxx.
Please help.
Regards,
Anil Bhamere

Need help for finding objects impacted by size change for an infoobject

hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variables

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

Need help for writing extract program

hi
i need help for writing extract program to retriew data from legacy system.
i already developed bdc programs for me31k and me21.
my requirement is to write extract program s for those t.codes.
to retriew data from legacy system and stored in flat file.

i need help with a java program. it is a program that allows the user to enter a student's GPA, number of extracurricular activities, and number of service activities. The user can not enter a gpa above 4.0 or below 0. The user can not enter a negative number for the number of both activities. If the student meets the following criteria: 1) GPA of 3.8 or above and at least one extracurricular activity and one service activity, 2) GPA below 3.8 but at least 3.4 and a total of at least three extracurricular and service activities, 3) GPA below 3.4 but at least 3.0 and at least two extracurricular activities and three service activities, the message "Scholarship candidate" should display. If the student does not meet the criteria above, then the message"not a candidate" should display. Can you help me, please?
You haven't posted ANY 'java program' for us to help with.
The forum is NOT a coding service. It is to help you with YOUR code.
Post the code you have written and SHOW us (don't just tell us) how you compile it and execute it and the results you get. Then we can help you with any problems you are are having.
If you need help understanding just what the program should be doing you need to ask your instructor to clarify the assignment.

Urgently need help for parsing IP header

Similar Messages

Maybe you are looking for