Urgently need help on setting up the ESM MANAGEMENT CONSOLE

Gooday everyone,
As i was trying to setup a demo ESM just to test out something before it goes into production server .
and i always hit up into issue where everytime i will receive a message which is : Object reference not set to an instance of an object .
after this message appear , i was unable to complete the ESM MANAGEMENT CONSOLE setup .
moreover we have the NOVELL Edirectory server setup wizard , so i was using the we have no idea what was going on about it . Besides that , the login user name and password seems to be correct our system using are NOVELL ENDPOINT SECURITY 3.5 ( need to upgrade to 4.1IR in later after the 3.5 version are setup .. )
is there any PRO will come to help ? we need this setup to run as usual ASAP :(any PRO can help will be much appreciated .
thanks .
from : NX ( a normal user start to use NOVELL ESM :( )

nxgame,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

  • Hook IMac pro to second monitor, Dell U2410.  Need help on setting from the laptop.

    What setting are needed to set up external monitor Dell U2410 monitor.  I am make progress but still need to need the setting internal to the Imac Pro.
    I am transmitting to the monitor.  The screen saver is there.  Hit F3 key causes anknowledgement. but open web pages they do not transfer.
    I have used the system preferance which acknowledges the presence of the monitor.
    Need suggestion if you have them.
    Thanks,
    Bobby

    The external hard drive should mount on your old iMac through USB. USB2 is backwards-compatible, only consequence is that you'll have to be patient with the long wait for your files to copy over the slower USB1 or 1.1.
    Another alternative is to directly connect the two Macs via the ethernet cable. Instructions are here:
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh914.html
    Note that you most likely need a crossover ethernet cable (versus a standard straight-though cable), based on this article:
    http://docs.info.apple.com/article.html?artnum=42717

  • Need help on setting up the strucute for a SideScrolling game

    I am using the tile approach and put the objects in a 2D array. For objects that move and interact with the chracters beyond just being there I have a list. The first group of Objects are called bricks and the second is World Objects. Bricks' locations are confined to the grid, but worldObjects' locations aren't. In the levelcreator I''ve made for the game you can select a brick and place it down and select a worldObject and place it down on the grid. I was wondering how I should make it so worldObject's aren't confined to the grid in the levelcreator. I've also made it so the levlecreator is zoomed out more than in the game. The grid consists of 75x75 tiles in the game and 50x50 tiles in the levelcreator. To switch from the levelcreator to the game I simply multiply by 1.5. Any suggestions. Or should I make it so All objects lie on the grid? Thanks. Any questions just post them here

    make the world objects totally independent of the grid while the bricks be dependent on it. have the world objects in a list with their positions stored in the object itself. When your doing, say, collision checking with bricks, just take their positions and see if the cell it occupies has a brick in it.
    personally i won't use a 2d array for a side scrolling game, the level tends to be rather large and a giant 2d array wastes annoying amounts of memory.

  • I need help with setting up my Sun Java Studio Creator

    Hello all, i need help with setting up the Studio Creator, i"m new to all that staff so is there anyone to help me just a little with all that if yes email me at [email protected] or get me on AOL Instant Messanger with the screen name: wretch17
    thanks :-)

    Hi,
    Welcome to the Creator community! Thanks for your interst in Sun Java Studio Creator. Please feel free to post any question related to creator on this forum .
    Take a look the creator website at
    http://developers.sun.com/prodtech/javatools/jscreator/
    CreatorTeam

  • I actually need help but cannot find the answer. Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as

    I actually need help but cannot find the answer.
    Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as blank as when I first open Firefox, it automatically loads my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
    Thank you.
    ''[Personal information removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''

    hello, please refer to [[New Tab Page – show, hide and customize top sites]] in order to switch the feature off.

  • I Need help!!! The card I used when I first set up my account I lost it so now I can't download any music cause it's wanting a number of that card I lost... Someone tell me what I can do???

    I Need help!!! The card I used when I first set up my account I lost it so now I can't download any music cause it's wanting a number off that card and I don't have it anymoe... Someone tell me what to do please???

    Add another good card and delete the old one, Yu can also purchase and redeem an iTunes gift card and hthen delee the bad credit card.  Yu need a valid payment method for update as well even purchasing free apps if the account was set up with a credit card.

  • HT5312 I want to purchase an APP on my ipad. When I enter the answers to the security question, it comes back invalid. The answers are correct. I need help re-setting my answers.

    I want to purchase an APP on my ipad. When I enter the answers to the security question, it comes back invalid. The answers are correct. I need help re-setting my answers.

     Account Security Team (AST) 
    Check the AppleCare number for your country here:
    http://support.apple.com/kb/HE57
    Call them up, and let them know you would like to be transferred to the Account Security Team.

  • I urgently need a contact email for the sales team can anybody help me with this

    I urgently need a contact email for the sales team regarding an outstanding query, can anybody help me with this please? Thanks in advance.

    Hello 
    Welcome to the EE Community! I'm afraid there isn't an e-mail you can contact the EE Mobile Sales team on, but here's how you can get in touch with them:
    If you're on Twitter, you can tweet them @EE, however If you'd prefer to talk to someone, you can dial:
    150 from your EE mobile phone
    If you're ringing from another phone, it's 01707 315000
    For handy text codes & more, check out this page: http://ee.co.uk/help/get-in-touch Cheers,
    Titanium
    Was my post helpful? Please take 2 seconds to hit the 'Kudos' button below

  • Urgently need help with this

    Hi!!
    I urgently need help with this:
    When I compile this in Flex Builder 3 it says: The element type 'mx:Application' must be terminated by the matching end-tag '</mx:Application>'.
    but I have this end tag in my file, but when I try to switch from source view to desgin view it says, that: >/mx:Script> expected to terminate element at line 71, this is right at the end of the .mxml file. I have actionscript(.as) file for scripting data.
    This is the mxml code to terminate apllication tag which I did as you can see:
    MXML code:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundGradientAlphas="[1.0, 1.0]" backgroundGradientColors="[#007200, #000200]" width="1024" height="768" applicationComplete="popolni_vse()">
    <mx:HTTPService id="bazaMME" url="lokalnabaza/baza_MME_svn.xml" showBusyCursor="true" resultFormat="e4x"/>
    <mx:Script source="dajzaj.as"/>
    <mx:states>
    <mx:State name="Galerije">
        <mx:SetProperty target="{panel1}" name="title" value="Galerije MME"/>
        <mx:SetProperty target="{panel2}" name="title" value="opis slik"/>
        <mx:SetProperty target="{panel3}" name="title" value="Opis Galerije"/>   
        <mx:AddChild relativeTo="{panel1}" position="lastChild">
        <mx:HorizontalList x="0" y="22" width="713.09863" height="157.39436" id="ListaslikGalerije"></mx:HorizontalList>
                </mx:AddChild>
                <mx:SetProperty target="{text1}" name="text" value="MME opisi galerij "/>
                <mx:AddChild relativeTo="{panel1}" position="lastChild">
                    <mx:Label x="217" y="346" text="labela za test" id="izbr"/>
                </mx:AddChild>
                <mx:SetProperty target="{label1}" name="text" value="26. November 2009@08:06"/>
                <mx:SetProperty target="{label1}" name="x" value="845"/>
                <mx:SetProperty target="{label1}" name="width" value="169"/>
                <mx:SetProperty target="{Gale}" name="text" value="plac za Galerije"/>
            </mx:State>
            <mx:State name="Projekti"/>
        </mx:states>
    <mx:MenuBar id="MMEMenu" labelField="@label" showRoot="true" fillAlphas="[1.0, 1.0]" fillColors="[#043D01, #000000]" color="#9EE499" x="8" y="24"
             itemClick="dajVsebino(event)" width="1006.1268" height="21.90141">
           <mx:XMLList id="MMEmenuModel">
                 <menuitem label="O nas">
                     <menuitem label="reference podjetja" name="refMME" type="check" groupName="one"/>
                     <menuitem label="reference direktor" name="refdir" type="check" groupName="one"/>
                  <menuitem label="Kontakt" name="podatMME" groupName="one" />
                  <menuitem label="Kje smo" name="lokaMME" type="check" groupName="one" />
                 </menuitem>           
                 <menuitem type="separator"/>
                 <menuitem label="Galerija">
                     <menuitem label="Slovenija" name="galSvn" type="check" groupName="one"/>
                     <menuitem label="Nemčija" name="galDeu" type="check" groupName="one" />
                 </menuitem>
                 <menuitem type="separator"/>
                 <menuitem label="projekti">
                     <menuitem label="Slovenija" name="projSvn" type="check" groupName="one"/>
                     <menuitem label="Nemčija" name="projDeu" type="check" groupName="one" />
                     <menuitem label="Madžarska" name="projHun" type="check" groupName="one"/>
                 </menuitem>
             </mx:XMLList>                       
             </mx:MenuBar>
        <mx:Label x="845" y="10" text="25. November 2009@08:21" color="#FFFFFF" width="169" height="18.02817" id="label1"/>
        <mx:Label x="746" y="10" text="zadnja posodobitev:" color="#FFFFFF"/>
        <mx:Panel x="9" y="57" width="743.02814" height="688.4507" layout="absolute" title="Plac za Vsebino" id="panel1">
            <mx:Text x="0" y="-0.1" text="MME vsebina" width="722.95776" height="648.4507" id="Gale"/>
        </mx:Panel>
        <mx:Label x="197.25" y="748.45" color="#FFFFFF" text="Copyright © 2009 MME d.o.o." fontSize="12" width="228.73239" height="20"/>
        <mx:Label x="463.35" y="748.45" text="izdelava spletnih strani: FACTUM d.o.o." color="#FBFDFD" fontSize="12" width="287.60565" height="20"/>
        <mx:Panel x="759" y="53" width="250" height="705.07043" layout="absolute" title="Plac za hitre novice" id="panel3">
            <mx:Text x="0" y="0" text="MME novice" width="230" height="665.07043" id="text1"/>
            <mx:Panel x="-10" y="325.35" width="250" height="336.61972" layout="absolute" title="začasna panela" color="#000203" themeColor="#4BA247" cornerRadius="10" backgroundColor="#4B9539" id="panel2">
                <mx:Label x="145" y="53" text="vrednost" id="spremmen"/>
                <mx:Label x="125" y="78" text="Label"/>
                <mx:Label x="125" y="103" text="Label"/>
                <mx:Label x="0" y="53" text="spremenljivka iz Menuja:"/>
                <mx:Label x="45" y="78" text="Label"/>
                <mx:Label x="45" y="103" text="Label"/>
            </mx:Panel>
        </mx:Panel>
        <mx:Label x="9.9" y="10" text="plac za naslov MME vsebine" id="MMEnaslov" color="#040000"/>
         </mx:states></mx:Application>

    I know it's been a while but… did you fix this?
    It looks to me like you are terminating the <mx:Application> tag at the top. The opening tag should end like this: resultFormat="e4x">, not resultFormat="e4x"/> (Remove the /).
    Carlos

  • Need help w/ setting up ports to run a server for America's Army

    Need help w/ setting up ports to run a server for America's Army. I read wat u need to change the ports but i dont understand wat to put. here is wat the site says
    Q: How do I run my own server?
    A: Quick and dirty server info:
    1. Edit RunServer.bat to change the map.
    2. Run RunServer.bat
    Or:
    server.exe LAN MAPNAME.aao (Host a LAN game)
    server.exe global MAPNAME.aao (Host a Public game)
    Also: When you create a server setup and want to allow other users to join your server, you need make sure the following ports are open for outgoing and incoming traffic in your firewall: 1716 (UDP), 1717 (UDP), 20025-20045 (TCP), and 20047 (TCP). Failure to open these ports will prevent the server from accepting connections from other players or prevent other players from being able to see your server online.
    There are several settings that also need to be defined in your server configuration INI file (in the Windows version, these files are located in “My Documents\America’s Army Server Settings\{settings file name}.ini”).
    [Engine.GameEngine]
    ServerActors=Andromeda.AndromedaMBS
    [Andromeda.Andromeda]
    GameServerIp=
    Make sure that you set the actual IP address of the America’s Army Server under GameServerIp= (for example, “GameServerIp=000.000.000.000”). The supplied address must be your actual internet IP address, if this is left blank or you supply the IP address for your internal network (such as 192.168.0.x), your server will not be able to accept connections from the internet.
    If your server.ini file contains the setting shown below, please change the QueryPort setting to 20025. This setting can also be removed, as the default setting is port 20025.
    [Andromeda.AndromedaMBS]
    QueryPort=20025
    Punkbuster user fix correction.
    If [Engine.GameEngine] block has been changed to read as below:
    [Engine.GameEngine]
    ServerActors=IPDrv.AndromedaMBS
    Please add the following block to your INI file:
    [IpDrv.AndromedaMBS]
    QueryPort=20025
    (Last Updated: 2006-04-20)

    Your images are not stored in the catalog. They are stored in folders on your computer. If you imported images that were already on your computer using the "Add" Option they are still in that same folder. If you imported images from your camera then they are in the folders that you specified when you imported. The catalog points to those images wherever they are located, and records all of the adjustments that you make to the image. When you send an image to Photoshop for further editing and save that image in Photoshop, it is normally saved back in the same folder as the original image.
    Images are not "saved" in Lightroom. The basic default workflow in Lightroom is to store all of the adjustments in the catalog, leaving the original image completely unmodified. The catalog becomes the central controlling mechanism. It is a database that contains pointers to where the images are located and a record of all adjustments made to those images using Lightroom. Properly managed, you only have those original master files and secondary files for the ones that you have sent to Photoshop for further adjustment. When you want to provide a copy for someone else, you use the export dialogue for that purpose. I often export JPEG images to share with others or to post on the web. After I have usedthe JPEG for its intended purpose I delete it.

  • I need help in setting up a wireless connection

    I need help in setting up a wireless connection.
    I have a 2005 iMac G5 and currently I am using a Qwest DSL Modem with a Belkin router.
    Qwest suggested that I buy a new wireless modem/router. It may be the Motorola 3347 or another wireless modem. I am worried about security when on the internet and have read about changing the SSID password and use the WPA for encryption. All of this is a mystery to me.
    Also, I would like to buy from Directv the Linksys wireless adapter to use on my HD-DVR receiver to get their “On Demand Movies.”
    My question is, does my iMac G5 have all of the security I need to use a wireless modem, and with the Linksys adapter can I view my photos or DVD’s in iMovie wirelessly to my TV in the living room?
    I am concerned about security with a wireless setup, but it seems that all of the new TV’s have the ability to have a wireless connection to the internet.
    Any suggestions would help me.
    Thanks,
    DaisyMay

    NETGEAR RangeMax Dual-Band Wireless-N Router with 4 Ethernet Ports
    Model: WNDR3400-100NAS | SKU: 1208844
    This wireless router enables speeds up to 600 Mbps for efficient operation and features a broadband usage meter that ensures accurate measurement of daily, weekly and monthly Internet traffic.
     4 Read reviews (21)
    Sale: $79.99

  • Downloaded Epsom printer app need help to set printer up on iPad 3

    Need help to set up Epsom printer to ipad3 downloaded Epsom app can find the printer but don't know where to set up

    It's Epson, not epsom.  Epsom refers to epsom salt (magnesium sulfate).
    ... Anyway, iPads don't have printers directly set up.  You might interface with a printer over a WiFi.  That could be done either using Apple's AirPrint (if the printer is new enough) or maybe you have Epson's iPrint utility.
    If you have the iPrint utility, you simply open the utility, click the "maintenance" button in the lower left, and select the "Printer" on the top and set it up there.

  • Purchased extreme to replace modem/router DSL used telephone cord need help with set up

    Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
    Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
    How do I get extreme to work as the modem and router ?

    How do I get extreme to work as the modem and router ?
    you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

  • Need help to set up my exsisting paypal account

    need help to set up my exsisting paypal account

    Did you have a look at the document listed here
    http://forums.adobe.com/community/formscentral/payments?view=documents
    Gen

  • Urgently  need help for parsing IP header

    Hi, could anyone tell which class I should use to parsing the IP header of a packet?
    Thanks many many times!

    > Hi, could anyone tell which class I should use to
    parsing the IP header of a packet?
    DatagramPacket?
    > Urgently need help for parsing IP header
    Don't flag your question as urgent, even if it is for you.
    * We all answer questions here voluntarily, in our leisure time. We do that because doing so is fun for us, because we enjoy helping people and having interesting discussions. Guess what, it is much less fun if it gets stressful. So the last thing you want to do to get us to answer your question is to pass your stress over to us.
    * People who are stressed and want a fast answer often don't even find the time to do the necessary research or to formulate their question in an easy to comprehend way. That's even less fun to work with. So you really don't want us to feel your stress. Instead you want to take your time to write a well formulated post that is fun to answer. The less likely it is for us to know that your question is urgent, the more likely you are to get a fast answer!
    * The simple notion that you want your post to be answered faster than those of the other members might feel rather unfair to some of us. Doubly so because often "urgent" questions actually are homework questions. Yours might be different, but someone who had bad experiences with this type of question might not read far enough to notice.

Maybe you are looking for