URGENTLY REQUIRE A CODE FOR FOLLOWING--WOULD BE GREAT HELP
HOW TO VALIDATE XML FILE USING SAX PARSER WITH SCHEMAS like .XSD FILES
Mankjas wrote:
URGENTLY REQUIRE A CODE FOR FOLLOWING--WOULD BE GREAT HELPNo, it wouldn't be a great help, as the next time you needed to do something like this you'd still be lost.
And no one here is just simply going to give you code anyway. We'll help you correct yours, and give you advice and tips, but we are not going to do your work for you. And urgent it is not, not to us. And your insisting that it is, is rude. We definately are not going to drop everything we might be doing to "help" you, especially when your essentially demanding that we do your work for you, with no effort on your part, besides.
Similar Messages
-
I Need Java code for following Algorithm
* I Need Java code for following algorithm. Kindly any one help.
1. Read the contents (ideas and its corresponding scores) from two files named as 'a' and 'b'.
2. Stored the file 'a' contents in array a[].
3. Stored the file 'b' contents in array b[].
4. compare both files like
if(a.equals(b[j])
Writing the common idea and add the score from file 'a' and 'b'.
else
write the uncommon idea and its score..
For example :
Form Agents.txt
action,65
architecture,85
eco-,15
essay,30
form,85
form,85
link,40
tangent,25
Form Agents1.txt
Black holes,69
essay,78
Herewith i have above mentioned two files named as Form Agents and Form Agents1.
Form Agents has eight fields
Form Agents1 has two fields
--> 'essay' is common in two files, so store the idea 'essay' and add the score from Form Agents score is '30' and Form Agents1 has 78 (essay 108).
Finally it stores idea in another file with uncommon fields also.
Please help us.We have tried with following code.
But we cant add the scores.
For Example:
Form Agents.txt --> has "essay,30"
Form Agents1.txt --> has "essay,78"
Result is: essay,108
Finally it stores idea in another file with uncommon fields also.
So Any one pls correct the following code.
try
DataOutputStream o1=new DataOutputStream(new
FileOutputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\CandidateResponses\\Form
Agents.txt"));
//Reading the contents of the files
BufferedReader br= new BufferedReader(new InputStreamReader(new
FileInputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\Ideological\\Form
Agents.txt")));
BufferedReader br1= new BufferedReader(new InputStreamReader(new
FileInputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\Related\\Form
Agents.txt")));
while((s=br.readLine())!=null)
s1+=s+"\n";
while((s2=br1.readLine())!=null)
s3+=s2+"\n";
int numTokens = 0;
StringTokenizer st = new StringTokenizer(s1);
String[] a = new String[10000];
String[] br_n=new String[10000];
int i=0;
while (st.hasMoreTokens())
s2 = st.nextToken();
a=s2.substring(0,s2.length()-3);
s6=s2.substring(s2.length()-2);
br_n[i]=s6;
i++;
numTokens++;
int numTokens1 = 0;
StringTokenizer st1 = new StringTokenizer (s3);
String[] b = new String[10000];
String[] br1_n=new String[1000];
int j=0;
while (st1.hasMoreTokens())
s4 = st1.nextToken();
b[j]=s4.substring(0,s4.length()-3);
s7=s4.substring(s4.length()-2);
br1_n[j]=s7;
j++;
numTokens1++;
int x=0;
for(int m=0;m<a.length;m++)
for(int n=0;n<b.length;n++)
if(a[m].equalsIgnoreCase(b[n])){
int sc=Integer.parseInt(br_n[m]);
int sc1=Integer.parseInt(br1_n[n]);
int score=sc+sc1;
o.writeBytes(a[m]+","+score+"\n");
break;
else
o.writeBytes(a[m]+","+br_n[m]+"\n");
break;
}catch(Exception e){} -
Can i have html code for date select options (SEARCH HELP)
Hi frinds,
I have a BSP Page with input as date.
Can i have html code for date select options (SEARCH HELP)
MoosaHi
Please find the sample code below.
FROM DATE
<htmlb:inputField id = "dd"
width = "45%"
type = "DATE"
showHelp = "X" <- Search help
alignment = "CENTER"
maxlength = "10"
disabled = "TRUE"
value = "<%= w_FROMDATE %>" />
TO DATE
<htmlb:inputField id = "dd"
width = "45%"
type = "DATE"
showHelp = "X"
alignment = "CENTER"
maxlength = "10"
disabled = "TRUE"
value = "<%= w_TODATE %>" />
Thanks
kalyan -
Urgent need of code for abap hr program
Hi,
Can any one provide with coding to calculate the leave balance for employee
for a given period. Its very urgent.
Thanks in advance,
SubhaHi
See this sample code for calculation of absence quota
using 2001 and 2006 infotypes
make changes as per your requirement
REPORT zh_absence_quota
NO STANDARD PAGE HEADING
MESSAGE-ID zh_msg
LINE-SIZE 169
LINE-COUNT 60(1).
T A B L E S D E C L A R A T I O N S
TABLES: pernr, " Logical PNP
t001p, " Personnel Subarea
t529u, " Employment Status
t500p, " Personnel Area
t501, " Employee Group
t503k, " Employee Subgroup
t549a, " Payroll Area
t554s, " Absence Type
t554t, " Absence Type Texts
t556a, " Quota Type
t527x, " Orgn. Unit
t556b, " Quota Type Text
pa0003. " Payroll Status
INFOTYPES:
0000, " Actions
0001, " Organizational Assignment
2006, " Absence Quota
2001. " Absences
T Y P E S D E C L A R A T I O N S
Employee Absence Structure
TYPES: BEGIN OF s_2001,
pernr TYPE persno, " Personal Number
awart TYPE awart, " Absence Type
subty TYPE subty, " Sub Type
endda TYPE endda, " End date
begda TYPE begda, " Begin date
abrtg TYPE abrtg, " Absence days
ename TYPE emnam, " employee Name
atext TYPE abwtxt, " Absence Type Text
END OF s_2001.
Employee Absence Quota Structure
TYPES: BEGIN OF s_2006,
pernr TYPE persno, " Personal Number
ktart TYPE abwko, " Absence Quota Type
year(4) TYPE n, " Year
subty TYPE subty, " Sub Type
endda TYPE endda, " End date
begda TYPE begda, " Begin date
anzhl TYPE ptm_quonum, " Absence Entitlement days
ename TYPE emnam, " employee Name
ktext TYPE kotxt, " Absence Type Text
kverb TYPE kverb, " Deduction Quota days
anzhb TYPE ptm_quonum, " Balance days
END OF s_2006.
Combined Employee Absence and Quota Structure
TYPES: BEGIN OF s_rep,
pernr TYPE persno, " Personal Number
ktart TYPE abwko, " Absence Quota Type
year(4) TYPE n, " Year
anzhl TYPE ptm_quonum, " Absence Entitlement days
kverb TYPE kverb, " Deduction Quota days
anzhb TYPE ptm_quonum, " Balance days
ktext TYPE kotxt, " Quota Type Text
awart TYPE awart, " Absence Type
abrtg TYPE abrtg, " Absence days
ename TYPE emnam, " employee Name
atext TYPE abwtxt, " Absence Type Text
endda TYPE endda, " End date
begda TYPE begda, " Begin date
END OF s_rep.
Declaration of Variables
DATA : gv_atext TYPE abwtxt, " Absence Type Text
gv_ktext TYPE kotxt, " Absence Type Text
gv_title1 TYPE sylisel, " Report title
gv_year(4) TYPE c, " Year
gv_mon(2) TYPE c, " Month
gv_hrs TYPE abwtg, " Hours
gv_date TYPE sydatum, " Date
gv_date1 TYPE sydatum, " Date
gv_dial. " Color flag
Declaration of Constants
CONSTANTS :
c_x TYPE c VALUE 'X', " Sign
c_1 TYPE persg VALUE '1', " Emp Group
c_pernr(8) TYPE n VALUE '00000000', " Pernr
c_moabw TYPE moabw VALUE '01', " Per SA Grouping
c_mozko TYPE mozko VALUE '01', " Per SA Grouping
c_mopgk TYPE mopgk VALUE '1', " Emp SGrp Grouping
c_endda TYPE sydatum VALUE '99991231', " End Date
c_val1(2) TYPE c VALUE '31', " Date Type
c_val2(2) TYPE c VALUE '12', " Date Type
c_val LIKE p0041-dar01 VALUE '01', " Date Type
c_date1 LIKE sy-datum VALUE '18000101'. " Date
I N T E R N A L T A B L E S D E C L A R A T I O N S
DATA: i_2001 TYPE STANDARD TABLE OF s_2001 WITH HEADER LINE,
i_2006 TYPE STANDARD TABLE OF s_2006 WITH HEADER LINE,
i_rep1 TYPE STANDARD TABLE OF s_2006 WITH HEADER LINE,
i_rep TYPE STANDARD TABLE OF s_rep WITH HEADER LINE.
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_ktart FOR t556a-ktart, " Absence Quota Type
s_awart FOR t554s-subty. " Absence Type
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-003. " Quota & Absence
PARAMETERS: p_qa RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-004. " Quota
PARAMETERS: p_q RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-005. " Absence
PARAMETERS: p_a RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.SELECTION-SCREEN END OF BLOCK b2.
I N I T I A L I Z A T I O N *
INITIALIZATION.
A T S E L E C T I O N - S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_screen.
S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Selection of Period
PERFORM get_period.
Get PERNR from LDB
GET pernr.
IF p0000-stat2 <> '0'.
Get the data from PA0001,PA2001, PA2006
PERFORM get_pers_data.
ENDIF.
T O P - O F - P A G E *
TOP-OF-PAGE.
Header of the List
PERFORM header.
E N D - O F - P A G E *
Footer
END-OF-PAGE.
IF p_qa = c_x.
Display both Absence and Quota Data
WRITE /1(188) sy-uline.
ELSEIF p_q = c_x.
Display only Quota Data
WRITE /1(114) sy-uline.
ELSEIF p_a = c_x.
Display only Absence Data
WRITE /1(125) sy-uline.
ENDIF.
E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
Combine the Absence and Quota Data
PERFORM append_data.
IF p_qa = c_x.
Display both Absence and Quota Data
PERFORM display_qa_data.
ELSEIF p_q = c_x.
Display only Quota Data
PERFORM display_q_data.
ELSEIF p_a = c_x.
Display only Absence Data
PERFORM display_a_data.
ENDIF.
*& Form validate_screen
Validation of Selection Screen fields
FORM validate_screen .
Validation of Personnel Number
CLEAR pa0003.
IF NOT pnppernr[] IS INITIAL.
SELECT pernr
FROM pa0003 UP TO 1 ROWS
INTO pa0003-pernr
WHERE pernr IN pnppernr.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Personnel Number'(006).
ENDIF.
ENDIF.
Validation of Employee Status
CLEAR t529u.
IF NOT pnpstat2[] IS INITIAL.
SELECT SINGLE statv
INTO t529u-statv
FROM t529u
WHERE statv IN pnpstat2 AND
statn = '2' AND
sprsl = sy-langu.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Invalid Employee Status'(007).
ENDIF.
ENDIF.
Validation of Personnel Area
CLEAR t500p.
IF NOT pnpwerks[] IS INITIAL.
SELECT persa
FROM t500p UP TO 1 ROWS
INTO t500p-persa
WHERE persa IN pnpwerks.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Personnel Area'(008).
ENDIF.
ENDIF.
Validation of Personnel Sub Area
CLEAR t001p.
IF NOT pnpbtrtl[] IS INITIAL.
SELECT btrtl
FROM t001p UP TO 1 ROWS
INTO t001p-btrtl
WHERE btrtl IN pnpbtrtl.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Personnel Sub Area'(009).
ENDIF.
ENDIF.
Validation of Employee Group
CLEAR t501.
IF NOT pnppersg[] IS INITIAL.
SELECT persg
FROM t501 UP TO 1 ROWS
INTO t501-persg
WHERE persg IN pnppersg.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Group'(010).
ENDIF.
ENDIF.
Validation of Employee Sub Group
CLEAR t503k.
IF NOT pnppersk[] IS INITIAL.
SELECT persk
FROM t503k UP TO 1 ROWS
INTO t503k-persk
WHERE persk IN pnppersk.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Sub Group'(011).
ENDIF.
ENDIF.
Validation of Payroll Area
CLEAR t549a.
IF NOT pnpabkrs[] IS INITIAL.
SELECT abkrs
FROM t549a UP TO 1 ROWS
INTO t549a-abkrs
WHERE abkrs IN pnpabkrs.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Payroll Area'(026).
ENDIF.
ENDIF.
Validation of Absence Type
CLEAR t554s.
IF NOT s_awart[] IS INITIAL.
SELECT subty
FROM t554s UP TO 1 ROWS
INTO t554s-subty
WHERE subty IN s_awart AND
moabw EQ c_moabw AND
endda EQ c_endda.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Absence Type'(012).
ENDIF.
ENDIF.
Validation of Absence Quota Type
CLEAR t556a.
IF NOT s_ktart[] IS INITIAL.
SELECT ktart
FROM t556a UP TO 1 ROWS
INTO t556a-ktart
WHERE ktart IN s_ktart AND
mopgk EQ c_mopgk AND
mozko EQ c_mozko AND
endda EQ c_endda.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Quota Type'(013).
ENDIF.
ENDIF.
ENDFORM. "validate_screen
*& Form get_period
Get the Correct Period based on Selection screen selection
FORM get_period.
CLEAR: gv_year,gv_mon, gv_date, gv_date1.
gv_year = sy-datum+0(4).
gv_mon = sy-datum+4(2).
IF pnptimr1 = c_x. " Current Date
pnpbegda = sy-datum.
pnpendda = sy-datum.
ELSEIF pnptimr2 = c_x. " Current Month
CONCATENATE gv_year gv_mon c_val INTO gv_date.
CONCATENATE gv_year gv_mon c_val1 INTO gv_date1.
pnpbegda = gv_date.
pnpendda = gv_date1.
ELSEIF pnptimr3 = c_x. " Current Year
CONCATENATE gv_year c_val c_val INTO gv_date.
CONCATENATE gv_year c_val2 c_val1 INTO gv_date1.
pnpbegda = gv_date.
pnpendda = gv_date1.
ELSEIF pnptimr4 = c_x. " Upto Today
pnpbegda = c_date1.
pnpendda = sy-datum.
ELSEIF pnptimr5 = c_x. " From Today
pnpbegda = sy-datum.
pnpendda = c_endda.
ELSE.
IF ( pnpbegda IS INITIAL AND pnpendda IS INITIAL ).
pnpbegda = c_date1.
pnpendda = c_endda.
ELSEIF pnpbegda IS INITIAL AND NOT pnpendda IS INITIAL.
pnpbegda = c_date1.
pnpendda = pnpendda.
ELSEIF NOT ( pnpbegda IS INITIAL AND pnpendda IS INITIAL ).
pnpbegda = pnpbegda.
pnpendda = pnpendda.
ENDIF.
ENDIF.
ENDFORM. "get_period
*& Form get_pers_data
Get the Absence and Quota Data from PA0001,PA2001,PA2006
FORM get_pers_data.
DATA: lv_year1(4) TYPE n,
lv_year2(4) TYPE n,
lv_date1 TYPE sydatum,
lv_date2 TYPE sydatum,
lv_anzhb TYPE ptm_quonum. " Last Year Balance days
Get data from Respective Infotypes
rp_provide_from_last p0001 space pnpbegda pnpendda.
Absence Data
LOOP AT p2001 WHERE pernr = pernr-pernr AND
begda GE pnpbegda AND
endda LE pnpendda.
IF p2001-awart IN s_awart.
i_2001-pernr = pernr-pernr.
i_2001-subty = p2001-subty.
i_2001-awart = p2001-awart.
i_2001-abrtg = p2001-abrtg.
i_2001-begda = p2001-begda.
i_2001-endda = p2001-endda.
READ TABLE p0001 WITH KEY pernr = p2001-pernr.
i_2001-ename = p0001-ename.
Get the Absence Type Text
CLEAR gv_atext.
SELECT SINGLE atext INTO gv_atext FROM t554t
WHERE sprsl = sy-langu AND
moabw = c_moabw AND
awart = p2001-awart.
IF sy-subrc = 0.
i_2001-atext = gv_atext.
ENDIF.
APPEND i_2001.
CLEAR i_2001.
ENDIF.
ENDLOOP.
Quota Data
LOOP AT p2006 WHERE pernr = pernr-pernr AND
begda GE pnpbegda AND
endda LE pnpendda.
IF p2006-ktart IN s_ktart.
i_2006-pernr = pernr-pernr.
i_2006-subty = p2006-subty.
i_2006-begda = p2006-begda.
i_2006-endda = p2006-endda.
i_2006-year = p2006-endda+0(4).
i_2006-ktart = p2006-ktart.
i_2006-anzhl = p2006-anzhl.
i_2006-kverb = p2006-kverb.
i_2006-anzhb = p2006-anzhl - p2006-kverb.
READ TABLE p0001 WITH KEY pernr = p2001-pernr.
i_2006-ename = p0001-ename.
Get the Quota Type Text
CLEAR gv_ktext.
SELECT SINGLE ktext INTO gv_ktext FROM t556b
WHERE sprsl = sy-langu AND
mopgk = c_mopgk AND
mozko = c_mozko AND
ktart = p2006-ktart.
IF sy-subrc = 0.
i_2006-ktext = gv_ktext.
ENDIF.
APPEND i_2006.
CLEAR i_2006.
ENDIF.
ENDLOOP.
For Vacation Quota (80) get the Balance of the Last Year and
add to the Current Year Quota
LOOP AT i_2006.
IF i_2006-ktart = '80'.
lv_year1 = i_2006-endda+0(4).
lv_year2 = lv_year1 - 1.
CONCATENATE lv_year2 '01' '01' INTO lv_date1.
CONCATENATE lv_year2 '12' '31' INTO lv_date2.
LOOP AT p2006 WHERE pernr = i_2006-pernr AND
begda GE lv_date1 AND
endda LE lv_date2 AND
ktart = '80'.
lv_anzhb = p2006-anzhl - p2006-kverb.
i_rep1-pernr = i_2006-pernr.
i_rep1-ktext = i_2006-ktext.
i_rep1-anzhl = p2006-anzhl.
i_rep1-kverb = p2006-kverb.
i_rep1-ename = i_2006-ename.
i_rep1-begda = p2006-begda.
i_rep1-endda = p2006-endda.
i_rep1-anzhb = lv_anzhb.
i_rep1-ktart = '80'.
i_rep1-year = lv_year2.
APPEND i_rep1.
CLEAR: i_rep1.
ENDLOOP.
ENDIF.
CLEAR: lv_year1, lv_year2,
lv_date1, lv_date2,lv_anzhb.
ENDLOOP.
SORT i_rep1 BY pernr ktart.
ENDFORM. "get_pers_data
*& Form append_data
Put the Absence and Quota Data into one Report Int Table
FORM append_data.
CLEAR: i_rep.
REFRESH: i_rep.
SORT i_2001 BY pernr awart.
SORT i_2006 BY pernr ktart year.
Move I_REP1 data into i_2006
LOOP AT i_rep1.
MOVE-CORRESPONDING i_rep1 TO i_2006.
APPEND i_2006.
CLEAR i_2006.
ENDLOOP.
Move the Absence and Quota Data into a final Int Table
LOOP AT i_2006.
i_rep-pernr = i_2006-pernr.
i_rep-ename = i_2006-ename.
i_rep-ktart = i_2006-ktart.
i_rep-anzhl = i_2006-anzhl.
i_rep-kverb = i_2006-kverb.
i_rep-ktext = i_2006-ktext.
i_rep-anzhb = i_2006-anzhb.
i_rep-year = i_2006-year.
CLEAR i_2001.
CASE i_2006-ktart.
WHEN '81'.
PERFORM get_2001 USING i_2006-pernr '1000' i_2006-year.
WHEN '50'.
PERFORM get_2001 USING i_2006-pernr '1002' i_2006-year.
WHEN '80'.
PERFORM get_2001 USING i_2006-pernr '1001' i_2006-year.
WHEN '56'.
PERFORM get_2001 USING i_2006-pernr '1003' i_2006-year.
WHEN '51'.
PERFORM get_2001 USING i_2006-pernr '1004' i_2006-year.
WHEN '52'.
PERFORM get_2001 USING i_2006-pernr '1005' i_2006-year.
WHEN '54'.
PERFORM get_2001 USING i_2006-pernr '1006' i_2006-year.
WHEN '53'.
PERFORM get_2001 USING i_2006-pernr '1007' i_2006-year.
WHEN '55'.
PERFORM get_2001 USING i_2006-pernr '1008' i_2006-year.
WHEN '57'.
PERFORM get_2001 USING i_2006-pernr '1009' i_2006-year.
WHEN '90'.
PERFORM get_2001 USING i_2006-pernr '2000' i_2006-year.
WHEN '58'.
PERFORM get_2001 USING i_2006-pernr '2001' i_2006-year.
WHEN '59'.
PERFORM get_2001 USING i_2006-pernr '2002' i_2006-year.
WHEN '91'.
PERFORM get_2001 USING i_2006-pernr '2003' i_2006-year.
ENDCASE.
IF sy-subrc <> 0.
APPEND i_rep.
ENDIF.
CLEAR i_rep.
ENDLOOP.
SORT i_rep BY pernr ktart year.
DELETE i_rep WHERE pernr = ' '.
ENDFORM. " append_data
*& Form display_qa_data
Display the Absence and Quota Data
FORM display_qa_data.
DATA: lv_flag, " New Flag
lv_tot2 TYPE ptm_quonum. " Absence Balance days
IF i_rep[] IS INITIAL.
MESSAGE i000 WITH 'No Data found'(014).
ELSE.
LOOP AT i_rep.
toggle color
PERFORM toggle_color.
IF lv_flag <> space.
NEW-LINE.
ENDIF.
AT NEW pernr.
READ TABLE i_rep INDEX sy-tabix.
WRITE:/1 sy-vline,2(8) i_rep-pernr,
10 sy-vline,11(40) i_rep-ename.
ENDAT.
AT NEW ktart.
READ TABLE i_rep INDEX sy-tabix.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline,52(25) i_rep-ktext.
ENDAT.
AT NEW year.
READ TABLE i_rep INDEX sy-tabix.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline,
77 sy-vline, 78(4) i_rep-year,
82 sy-vline, 83(11) i_rep-anzhl,
94 sy-vline, 95(25) i_rep-atext,
120 sy-vline,133 sy-vline,
144 sy-vline,
155 sy-vline,156(13) i_rep-anzhb,
169 sy-vline.
lv_tot2 = lv_tot2 + i_rep-anzhb.
ENDAT.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline, 77 sy-vline,
82 sy-vline, 94 sy-vline,
120 sy-vline,121(12) i_rep-abrtg NO-ZERO,
133 sy-vline,134(10) i_rep-begda NO-ZERO,
144 sy-vline,145(10) i_rep-endda NO-ZERO,
155 sy-vline,169 sy-vline.
NEW-LINE.
AT END OF pernr.
WRITE : /1(169) sy-uline.
SUM.
FORMAT COLOR 3.
WRITE:/1 sy-vline, 10 sy-vline,
51 sy-vline, 77 sy-vline,
82 sy-vline, 94 sy-vline,
120 sy-vline,121(12) i_rep-abrtg,
133 sy-vline,144 sy-vline,
155 sy-vline, 156(13) lv_tot2,
169 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(169) sy-uline.
CLEAR lv_tot2.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. " display_qa_data
*& Form display_q_data
Display only the Quota Data
FORM display_q_data.
DATA: lv_flag. " New Flag
SORT i_2006 BY pernr ktart year.
IF i_2006[] IS INITIAL.
MESSAGE i000 WITH 'No Data found'(014).
ELSE.
LOOP AT i_2006.
Toggle Color
PERFORM toggle_color.
IF lv_flag <> space.
NEW-LINE.
ENDIF.
AT NEW pernr.
READ TABLE i_2006 INDEX sy-tabix.
WRITE: /1 sy-vline, 2(8) i_2006-pernr,
10 sy-vline,11(40) i_2006-ename.
ENDAT.
AT NEW ktart.
READ TABLE i_2006 INDEX sy-tabix.
WRITE: 1 sy-vline,10 sy-vline,
51 sy-vline,52(25) i_2006-ktext.
ENDAT.
AT NEW year.
READ TABLE i_2006 INDEX sy-tabix.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline,
77 sy-vline,78(4) i_2006-year,
82 sy-vline,83(11) i_2006-anzhl,
94 sy-vline,95(13) i_2006-anzhb,
108 sy-vline.
NEW-LINE.
ENDAT.
AT END OF pernr.
WRITE : /1(108) sy-uline.
SUM.
FORMAT COLOR 3.
WRITE: /1 sy-vline, 10 sy-vline,
51 sy-vline,
77 sy-vline, 82 sy-vline,
94 sy-vline, 95(13) i_2006-anzhb,
108 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(108) sy-uline.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. " display_q_data
*& Form display_a_data
Display Only the Absence Quota
FORM display_a_data.
DATA: lv_flag. " New Flag
SORT i_2001 BY pernr awart.
IF i_2001[] IS INITIAL.
MESSAGE i000 WITH 'No Data found'(014).
ELSE.
LOOP AT i_2001.
Toggle Color
PERFORM toggle_color.
IF lv_flag <> space.
NEW-LINE.
ENDIF.
AT NEW pernr.
READ TABLE i_2001 INDEX sy-tabix.
WRITE: /1 sy-vline, 2(10) i_2001-pernr,
10 sy-vline,11(40) i_2001-ename.
ENDAT.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline,52(25) i_2001-atext,
77 sy-vline,78(12) i_2001-abrtg,
90 sy-vline,91(10) i_2001-begda,
101 sy-vline,102(10) i_2001-endda,
112 sy-vline.
NEW-LINE.
AT END OF pernr.
WRITE : /1(112) sy-uline.
SUM.
FORMAT COLOR 3.
WRITE: /1 sy-vline, 10 sy-vline,
51 sy-vline,
77 sy-vline,78(12) i_2001-abrtg,
90 sy-vline,101 sy-vline,
112 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(112) sy-uline.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. " display_a_data
*& Form header
Write the Report Header
FORM header .
data : lv_pers type pbtxt,
lv_orgn type orgtx.
gv_title1 = sy-title. " Set List Header
IF p_qa = c_x.
NEW-PAGE LINE-SIZE 193.
ELSEIF p_a = c_x.
NEW-PAGE LINE-SIZE 125.
ELSEIF p_q = c_x.
NEW-PAGE LINE-SIZE 119.
ENDIF.
Standard header
FORMAT RESET.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = gv_title1.
Get the Personal Area and Org.Unit Texts
clear : lv_pers,lv_orgn.
select single name1 into lv_pers
from t500p where persa = pnpwerks-low.
select single orgtx into lv_orgn
from t527x where sprsl = sy-langu and
orgeh = pnporgeh-low and
endda = c_endda.
if not lv_pers is initial.
write : /2 'Personal Area:'(017), 17(25) lv_pers color 7.
endif.
if not lv_orgn is initial.
write : /2 'Organization Unit:'(021), 20(25) lv_orgn color 3.
endif.
IF p_qa = c_x.
FORMAT COLOR COL_HEADING.
WRITE : /1(169) sy-uline.
WRITE:/1 sy-vline,2(8) 'Emp.No'(015) CENTERED,
10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
51 sy-vline,52(25) 'Quota Description'(018) CENTERED,
77 sy-vline,78(4) 'Year'(027),
82 sy-vline,83(11) 'Entitlement'(019),
94 sy-vline,95(25) 'Absence Description'(022) CENTERED,
120 sy-vline,121(12) 'Absence days'(023),
133 sy-vline,134(10) 'From Date'(024),
144 sy-vline,145(10) 'To Date'(025),
155 sy-vline,156(13) 'Quota Balance'(020),
169 sy-vline.
WRITE : /1(169) sy-uline.
ELSEIF p_q = c_x.
FORMAT COLOR COL_HEADING.
WRITE : /1(108) sy-uline.
WRITE:/1 sy-vline,2(8) 'Emp.No'(015) CENTERED,
10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
51 sy-vline,52(25) 'Quota Description'(018) CENTERED,
77 sy-vline,78(4) 'Year'(027),
82 sy-vline,83(11) 'Entitlement'(019),
94 sy-vline,95(13) 'Quota Balance'(020),
108 sy-vline.
WRITE : /1(108) sy-uline.
ELSEIF p_a = c_x.
FORMAT COLOR COL_HEADING.
WRITE : /1(112) sy-uline.
WRITE:/1 sy-vline,2(8) 'Emp.No'(015) CENTERED,
10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
51 sy-vline,52(25) 'Absence Description'(022) CENTERED,
77 sy-vline,78(12) 'Absence days'(023),
90 sy-vline,91(10) 'From Date'(024),
101 sy-vline,102(10) 'To Date'(025),
112 sy-vline.
WRITE : /1(112) sy-uline.
ENDIF.
ENDFORM. " header
*& Form toggle_color
This routine alters the color of the records in the list
FORM toggle_color.
IF gv_dial = space.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
gv_dial = c_x.
ELSE.
FORMAT COLOR 1 INTENSIFIED OFF.
CLEAR gv_dial.
ENDIF.
ENDFORM. " toggle_color
*& Form get_2001
Get the ABsence type for each Quota type
FORM get_2001 USING p_pernr TYPE persno
p_value TYPE awart
p_year.
LOOP AT i_2001 WHERE pernr = p_pernr AND
awart = p_value AND
endda+0(4) = p_year.
i_rep-awart = i_2001-awart.
i_rep-abrtg = i_2001-abrtg.
i_rep-atext = i_2001-atext.
i_rep-begda = i_2001-begda.
i_rep-endda = i_2001-endda.
APPEND i_rep.
ENDLOOP.
ENDFORM. " get_2001
<b>
Reward points for useful Answers</b>
Regards
Anji -
Required Java Code for Validation
Hello Everybody
I need a java Code To validate the value exist in system
For an user Defined Function.
System A value Need to Compare in System B.
IF the value exist in System B Then need to sent to System C.
early answer would be great
Regds
RajHI,
Lookup has to be use in this case.
Steps to be done:
1) Get the value from the file and pass that value to R3 system using JAVA lookup.
2) In R3 end under the function module write a code which checked the PO with the PO which is present in R3.
3) Return the value of the comparision to UDF and then pouplate the value in IDOC.
I hope this is what u want.
Lookup links are below:
Some use cases:
Look up material number from table MARA.
Look up cost center budget.
Look up employee information.
Look up unit-of-measure (UOM) information from table t006a.
Lookup for raising an alert.
There are two ways in which we can do lookup:
Call lookup method from GUI mapping.
Call lookup method from XSLT mapping.
Lookup method from GUI mapping can be called using any of the following ways.
RFC lookup using JCO (without communication channel)
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
RFC lookup with communication channel.
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
Lookup using JDBC adapter.
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
/people/sap.user72/blog/2005/12/06/optimizing-lookups-in-xi
CSV file lookup.
/people/sundararamaprasad.subbaraman/blog/2005/12/09/making-csv-file-lookup-possible-in-sap-xi
Call lookup method from GUI mapping: Use this for ur scenario:
The steps are as follows:
Develop and test ABAP function module.
Develop and test Java method within Integration Repository/message mapping tool.
Check this weblogs with some screenshots on how to achieve this:
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
/people/sap.user72/blog/2005/12/06/optimizing-lookups-in-xi
/people/morten.wittrock/blog/2006/03/30/wrapping-your-mapping-lookup-api-code-in-easy-to-use-java-classes
Thnx
Chirag -
OTL: Timecard Audit Template require reason code for all transaction.
We are currently using OTL with CLA template with interface time entry from external system.
When monthly time entry interfaced into OTL each employee have to review and update their time and submit to manager, but when process to audit template they has been forced to update reason code for all transactions.
We suppose to update the reason code only for the modified transactions. Please help me.
Nonny.nondhasid,
If you are not modifying those records which are asking for a reason field to be filled, then it should be coming from the Late setup. Check the CLA setup.
--Shiv -
Okay, I'm going to try to post this ONE MORE TIME!!!!!!! This **** site keeps deleting my question!?????
While trying to download an app, even a free one, the download starts then a box pops up asking for verification of payment. I put in my credit card info but then it doesn't like my address info.? So I then try every variation of spelling and such. I can't make it happy, I never had a prob before .
Then I decided to try to redeem my iTunes money but a box come up , it has my account name there, and my remaining $. It all looks correct. But it asks for a code .??? I entered all the info when I got the card. Then threw the card away. I've bought items from this with no prob until now. ???
So I'm suppose to hang onto that carduntil I spend everything? Never did before, and it was working fine till now.
So here I sit . Pretty much clueless and starting to steam !
Hopefully someone has a tip or suggestion.If you have a credit card on file on top of your gift card then it is asking you to confirm the security code for the card, which for a Visa or MasterCard is 3 digits located on the back, or AMEX has 4 digits on the front. This happens just to ensure that you are the account holder, and would happen from time to time whether it was a free or paid app, even if you have a credit through your gift card. This doesn't mean that your credit card will be charged.
-
Urgent requirement in format change....pls help
Hi experts,
I have a urgent requirement of changing the format according to the customer where the form will be sent. The fields that I need to change are date and currency formats.
Only the customer name his country and region is mentioned and I am working with smartform.I had to retrieve the format according to the details given above.
Can anyoneplease help me out regarding the query.
Useful answers will be awarded.hi abi,
how many formats u have to print... if have difine number of formatas
you can do as foollows.
1.create a folw login before printing the data time... therer move the date and time to different variables using the WRITE TO statement.. then print the variables.
2. create different textelemnt for differnt type of customes.. in each textelment contatins differnet format to printed.. in conditons tab of the textelemt give the condition to print..
Please Close this thread.. when u r problem is solved
Reward if Helpful
Regards
Naresh Reddy K -
URGENT check the code for vendor ageing (Give Solution)
hi this is the code which i am using to calculate the
ageing but not able to get the result.
every time the result is 0.plz suggest me the solution.
its very urgent.
*& Report Z_VENDOR AGEING *
*& in this repoet I am calculating the vendor ageing
which is depending on formula
AGEING = Current Date(or any date entered by user) Bline Date(BSIK-zfbdt)
REPORT z_vendor NO STANDARD PAGE HEADING
LINE-SIZE 200
LINE-COUNT 65(3).
TABLES : bsik.
DATA : BEGIN OF t_out OCCURS 0,
bukrs LIKE bsik-bukrs,
saknr LIKE bsik-saknr,
bldat LIKE bsik-bldat,
wrbtr LIKE bsik-wrbtr,
lifnr LIKE bsik-lifnr,
zfbdt like bsik-zfbdt,
ageing type i,
END OF t_out.
parameters : p_date1 type d.
SELECT-OPTIONS : s_bukrs FOR bsik-bukrs,
s_saknr FOR bsik-saknr,
s_lifnr FOR bsik-lifnr.
SELECT bukrs saknr bldat wrbtr lifnr zfbdt
FROM bsik
INTO TABLE t_out
WHERE saknr IN s_saknr
AND bukrs IN s_bukrs
AND lifnr IN s_lifnr.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
EXPORTING
i_datum_bis = p_date1
i_datum_von = t_out-zfbdt
I_KZ_EXCL_VON = '0'
I_KZ_INCL_BIS = '0'
I_KZ_ULT_BIS = ' '
I_KZ_ULT_VON = ' '
I_STGMETH = '0'
I_SZBMETH = '1'
IMPORTING
E_TAGE = t_out-ageing
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT t_out.
WRITE : / t_out-saknr,
t_out-lifnr,
t_out-wrbtr,
t_out-zfbdt,
t_out-ageing.
ENDLOOP.hi sanjeev,
still problem there.
dont worry. just copy this code.
try this code.
TABLES : bsik.
DATA : BEGIN OF t_out OCCURS 0,
bukrs LIKE bsik-bukrs,
saknr LIKE bsik-saknr,
bldat LIKE bsik-bldat,
wrbtr LIKE bsik-wrbtr,
lifnr LIKE bsik-lifnr,
zfbdt like bsik-zfbdt,
ageing type i,
END OF t_out.
parameters : p_date1 type d.
SELECT-OPTIONS : s_bukrs FOR bsik-bukrs,
s_saknr FOR bsik-saknr,
s_lifnr FOR bsik-lifnr.
SELECT bukrs saknr bldat wrbtr lifnr zfbdt
FROM bsik
INTO <b>corresponding fields of</b> TABLE t_out
WHERE saknr IN s_saknr
AND bukrs IN s_bukrs
AND lifnr IN s_lifnr.
<b>loop at t_out.</b>
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
EXPORTING
i_datum_bis = p_date1
i_datum_von = t_out-zfbdt
I_KZ_EXCL_VON = '0'
I_KZ_INCL_BIS = '0'
I_KZ_ULT_BIS = ' '
I_KZ_ULT_VON = ' '
I_STGMETH = '0'
I_SZBMETH = '1'
IMPORTING
E_TAGE = t_out-ageing
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
<b>modify t_out.</b>
clear t_out.
<b>endloop.</b>
LOOP AT t_out.
WRITE : / t_out-saknr,
t_out-lifnr,
t_out-wrbtr,
t_out-zfbdt,
t_out-ageing.
endloop
rgds
anver
Message was edited by: Anversha s -
URGENT Check this code for me please
Dear whoeverthisreads, please read and see at the bottom my sourcecode, or whatever I could make of it until (even with help) I failed to see any solution. Please copy, paste and run to see if you can manage to adjust the program to make it work in the way as described. And I think I made it unnecessarily complicated. Whatever you can do for me, I will be very, very grateful.
Prem Pradeep, email: [email protected]
(A beginning dutch Java student who is running out of time and hope)
Catalogue Manager
Specification:
a) Develop an object to represent to encapsulate an item in a catalogue. Each CatalogueItem has three pieces of information: an alphanumeric catalogue code, a name, and a price (in dollars and cents), that excludes sales tax. The object should also be able to report the price, inclusive of a 15% sales tax, and the taxed component of the price.
b) Work out a way to be able to support the inc tax/ex tax price accessors, and the tax component accessor, without needing to store any additional information in the object.
c) Use an array of 5 CatalogueItem items to store data. (You may assume that no imported goods will be recorded.)
d) Write a driver program that prompts for three sets of user input (catalogue number, description and price), to be stored in the atalogueItem instance.
e) The data are to be read for each item in a single line. The data lines will be in the format:
CatNo:Description:Price
Use a StringTokenizer object to separate these data lines into their components.
f) Review the class definition of CatalogueItem, and use modifiers where appropriate to:
� Ensure that data is properly protected;
� Ensure that the accessors and mutators are most visible;
� The accessors and mutators for the catalogue number and description cannot be overridden.
� The constant for the tax rate is publicly accessible, and does not need an instance of the class
present in order to be accessible.
As well as a summary, the program should also calculate and display:
� All of the cheapest and most expensive item(s) in the catalogue. In the case of more than one
item being the cheapest (or most expensive), they should all be listed.
� A total of the pre-tax worth of the goods in the catalogue.
� The average amount of tax on the items in the catalogue.
A sample execution of the program may be as follows (output should be tabulated):
Enter five items of data:
AA123: Telephone: 52.00
ZJ282: Pine Table: 98.00
BA023: Headphones: 23.00
ZZ338: Wristwatch: 295.00
JW289: Tape Recorder: 23.00
LISTING OF ALL GOODS
Cat Description ExTax Tax IncTax ~
ZJ282 pine Table 98.00 14.70 112.70
AA123 Telephone 52.00 7.80 59.80
BA023 Headphones 23.00 3.45 26.45
ZZ338 Wristwatch 295.00 44.25 339.25
JW289 Tape Recorder 23.00 3.45 26.45
CHEAPEST GOODS IN CATALOGUE
Cat Description ExTax Tax IncTax
BA023 Headphones 23.00 3.45 26.45
JW289 Tape Recorder 23.00 3.45 26.45
MOST EXPENSIVE GOODS IN CATALOGUE
Cat Description ExTax Tax IncTax
ZZ338 Wristwatch 295.00 44.25 339.25
TOTAL PRE-TAX WORTH OF CATALOGUE ITEMS: 491.00
AVERAGE AMOUNT OF TAX PAYABLE PER ITEM: 14.73
The next code is what I could make of it�until I got terribly stuck...
//CatalogueItem.java
import java.io.*;
import java.text.DecimalFormat;
import java.util.StringTokenizer;
public class CatalogueItem {
private static final double TAXABLE_PERCENTAGE = 0.15;
private String catalogNumber;
private String description;
private double price;
/** Creates a new instance of CatalogueItem */
public CatalogueItem() {
catalogNumber = null;
description = null;
price = 0;
public CatalogueItem(String pCatalogNumber, String pDescription, double pPrice) {
catalogNumber = pCatalogNumber;
description = pDescription;
price = pPrice;
void setCatalogNumber(String pCatalogNumber) {
catalogNumber = pCatalogNumber;
String getCatalogNumber() {
String str = catalogNumber;
return str;
void setDescription(String pDescription) {
description = pDescription;
String getDescription() {
String str = description;
return str;
void setPrice(String pPrice) {
price = Double.parseDouble(pPrice);
double getPrice() {
double rprice = price;
return formatDouble(rprice);
double getTaxAmount(){
double rTaxAmount = price * TAXABLE_PERCENTAGE;
return formatDouble(rTaxAmount);
double getIncTaxAmount() {
double rTaxAmount = price * (1 + TAXABLE_PERCENTAGE);
return formatDouble(rTaxAmount);
double formatDouble(double value) {
DecimalFormat myFormatter = new DecimalFormat("###.##");
String str1 = myFormatter.format(value);
// System.out.println("String is " + str1);
// System.out.println("The format value : " + value);
return Double.parseDouble(str1);
public static void main(String[] args) throws IOException {
final int MAX_INPUT_SET = 5;
final String strQ = "Enter five items of data:";
CatalogueItem[] catalogList = new CatalogueItem[MAX_INPUT_SET];
String strInput;
BufferedReader stdin = new BufferedReader(new InputStreamReader(System.in));
String header = "Cat\tDescription\tExTax\tTax\tInc Tax";
String lines = "---\t-----------\t------\t---\t-------";
// Input of five items with three data each, delimiter ":"
for (int i = 0; i < MAX_INPUT_SET; i++) {
catalogList[i] = new CatalogueItem();
System.out.print(strQ);
strInput = stdin.readLine();
StringTokenizer tokenizer = new StringTokenizer(strInput, ":" );
String inCatNo = tokenizer.nextToken();
String inDescr = tokenizer.nextToken();
String inPrice = tokenizer.nextToken();
catalogList.setCatalogNumnber(inCatNo);
catalogList[i].setDescription(inDescr);
catalogList[i].setPrice(inPrice);
// Listing of all goods
System.out.println("LISTING OF ALL GOODS");
System.out.println(header);
System.out.println(lines);
for (int i = 0; i < MAX_INPUT_SET; i++) {
System.out.println(
catalogList[i].getCatalogNumber() + "\t" +
catalogList[i].getDescription() + "\t" +
catalogList[i].getPrice() + "\t" +
catalogList[i].getTaxAmount() + "\t" +
catalogList[i].getIncTaxAmount());
// This should pick the cheapest and most expensive goods in catalogue, but
// this code is not good:
// In the case of more than one item being the cheapest (or most expensive),
// they should all be listed.
double cheapest = cataloguelist[1].getPrice();
double mostExpensive = cataloguelist[1].getPrice();
for(int i=2; i< MAX_INPUT_SET; i++){
if (cataloguelist[i].getPrice < cheapest)
cheapest = i;}
for(int i=2; i< MAX_INPUT_SET; i++){
if (cataloguelist[i].getPrice > mostExpensivet)
mostExpensive = i;}
// Lists cheapest goods (not complete enough)
i = cheapest;
System.out.println("CHEAPEST GOODS IN CATALOGUE");
System.out.println(header);
System.out.println(lines);
System.out.println(
catalogList[i].getCatalogNumber() + "\t" +
catalogList[i].getDescription() + "\t" +
catalogList[i].getPrice() + "\t" +
catalogList[i].getTaxAmount() + "\t" +
catalogList[i].getIncTaxAmount());
// Lists most expensive goods (not complete enough)
i = mostExpensive;
System.out.println("MOST EXPENSIVE GOODS IN CATALOGUE");
System.out.println(header);
System.out.println(lines);
System.out.println(
catalogList[i].getCatalogNumber() + "\t" +
catalogList[i].getDescription() + "\t" +
catalogList[i].getPrice() + "\t" +
catalogList[i].getTaxAmount() + "\t" +
catalogList[i].getIncTaxAmount());}}
// Generates and shows total pre-tax worth of catalogue items (how??)
// generates and shows amount of tax payable per item (how??)How is this:
import java.io.*;
import java.text.*;
import java.util.*;
public class Cat
Vector items = new Vector();
public Cat()
public void read(String fname)
FileReader fr;
BufferedReader br;
String str ="";
try
fr = new FileReader(fname);
br = new BufferedReader(fr);
while ((str = br.readLine()) != null && items.size() < 30)
if (!str.trim().equals(""))
StringTokenizer tokenizer = new StringTokenizer(str, ":");
String n = tokenizer.nextToken().trim();
String d = tokenizer.nextToken().trim();
String s = tokenizer.nextToken().trim();
double p = Double.parseDouble(s);
items.add(new Item(n,d,p));
fr.close();
catch (FileNotFoundException e)
System.out.println("Input file cannot be located, please make sure the file exists!");
System.exit(0);
catch (IOException e)
System.out.println(e.getMessage());
System.out.println("Application cannot read the data from the file!");
System.exit(0);
public void displayAll()
for (int j=0; j < items.size(); j++)
Item item = (Item)items.get(j);
System.out.println(item.toString());
public void sort()
Collections.sort(items);
public class Item implements Comparable
String number, description;
double price,pricep;
final double TAXRATE = 0.15;
public Item(String number, String description, double price)
this.number = number;
this.description = description;
this.price = price;
this.pricep = price * TAXRATE;
public int compareTo(Object o1)
String o = ((Item)o1).number;
return(number.compareTo(o));
public String toString()
DecimalFormat df = new DecimalFormat("#.00");
String p1 = df.format(TAXRATE*price);
String p2 = df.format(TAXRATE*price+price);
String s = number+"\t "+description+"\t"+price+"\t"+p1+"\t"+p2+"\t" ;
return(s);
public static void main (String[] args)
Cat catalog = new Cat();
catalog.read("C31.dat");
String reply = "";
BufferedReader stdin = new BufferedReader(new InputStreamReader(System.in));
while (!reply.equals("e"))
System.out.println("");
System.out.println("CATALOGUE MANAGER: MAIN MENU");
System.out.println("============================");
System.out.println("a) display all goods b) display cheapest/dearest goods");
System.out.println("c) sort the goods list d) search the good list");
System.out.println("e) quit");
System.out.print("Option:");
try
reply = stdin.readLine();
catch (IOException e)
System.out.println("ERROR:" + e.getMessage());
System.out.println("Application exits now");
System.exit(0);
if (reply.equals("a")) catalog.displayAll();
if (reply.equals("c")) catalog.sort();
Noah -
Urgent please send code for this one ( write code by using core java)
hi sir
my question
i am taking one square box .. and i divide that square in again four parts .. now i am placing one object in 1st box now i want to move that object to 2 box or third box... like that only if my object is in 1st box now i want to jump directly to 4th box
i want that programing code the code will written BY USING CORE JAVA ONLY
PLEASE HELP FOR THAThi sirWhat if I'm a madam?
i want that programing code Why did you post here asking for it?
1) You are the Lead Architect at a world-class company and none of your staff of topnotch developers are able to handle this insidious task. You need to pull in outside resources for this noodler. You would use Dice, Monster, etc., but, by a freak coincidence, you happen to have had illicit trysts with the wives of several high-ranking executives in each of those companies, and as a result, have been blacklisted in perpetuity. You sought help here because you know that the denizens of this particular cyber-community are not only the best of the best of the best in the world of software development, we also happen--by yet another bizarre convergence of the unfahtomable Threads of Fate--to be the handsomest and best-endowed, dude-tube-wise. This is exactly what you need to distract your wife from your many concubines so you can continue with your plan for world dominance, which, of course, is but a small cog in the machina profunda that grinds unfailingly and inexorably toward your ultimate goal of the perfect tofu burrito.
2) You are a lazy slimeball student who thinks it's acceptable to take credit for somebody else's work. You have no motivation, no ethics, and nothing to contribute to the society upon which you will become a bigger and more loathsome burden daily. -
Safari Update required security code for validation
I have an I Phone 5 & 6. Received a request for a Safari update. First asked for phone number. None entered were accepted. Then asked to enter security code sent to you in order to complete validation. Did not receive a security code. Don't know what this is asking for. Any suggestions?
I had this problem this morning on my iPhone 5. I went into Settings>>Safari>>Clear History and Website Data and clicked that. Unfortunately you'll lose any pages you had open as well as browsing history. However, this solved the problem immediately.
-
Urgent Requirement : XSD Validation for internal references
Hi,
I have a requirement , according to which....i have
Invoice Date and Contract Date and XSD validations on these two fields are dependent.
i.e, invoice date is required if contract date is absent .
Contract date is required if invoice date is absent.
How can we validate the xml file with this scenario using XSD.
Thanks for the help....in advance.
Regards,
AruHi,
The solution to the problem u gave works fine but validates like AND condition not OR.........
Any other answers..........Thanks for ur reply......
Aru -
Require Activation code for 11.5.9
I am trying to install 11.5.9 on Linux it's prompting to enter activation code where do i get
The the file structure is like this of runinstaller cd when do i invoke install.sh i got that message
errors.log lib reactivate wizardoptions.txt
install.sh log4j.properties reactivate.sh wizardoptions.txt.init
installwizard.jar logs scripts wizardoptions-zippriorities.txt
j2re1.4.2_02 oracle_jdbc.jar stage wizrapidstart.sh -
Urgently require a Programmer for TOP Dubai Co. (Oracle on Sun Solaris)
Need a good integration programer, experienced on Oracle Database, and Sun Solaris operating system. Budget is Dhs 8,000 per month Negotiable, depending on the experience. ( For a leading Dubai Company) - Revert back with detailed CV NOW........
Appointment in a week.
Location - Dubai UAE
Sadsack
00 91 98 60 225 225
[email protected]Maybe there should be a category like "job offers" in this forum?
As a side note: maybe add some more details next time, such as: which version of Oracle products, which kind of operating system skills (I read programmer as developer, not as administrator), etc.
C.
Maybe you are looking for
-
Dual Boot Windows 7 and solaris 10
Can some body guide me how to dual boot windows 7 and solaris 10? Thanks
-
I'm creating a basic navigation bar for my site and I want to create a common set of buttons that will be used to link to different sections on the site. I have no problem creating a rectangle with text, converting it to a symbol (button), and then d
-
Help needed to move a java.rmi.Remote object.....
Hi, I have an object extending java.rmi.Remote on a server. I want to get it onto a client (ie the actual object, not a reference to the object on the server). The catch (isn't there always one): The client must only get class definitions/interface d
-
[Help] Create dinamically components and its id
Hello guys. I need a help I know it sounds weird from the title above but I have been struggling to find a better solution but can´t figure it out. I have searched through internet but couldn´t find a solution for my problem. Here is what I have to d
-
Mappimg and updation in bdc 'session ' and 'call transaction' methods
What will happen if error record comes while updating in session method and call transaction method.