Urgently required Crystal Reports 2008 FixPack_03 for SAP B1 8.8

Dear All,
I Urgently need Crystal Reports 2008 FixPack_03 for SAP B1 8.8. It is unavailable on the following link:
Crystal Reports 2008 Reference [original link is broken]
I have also searched it but unable to find it. If anyone has this, kindly share it.

Hi Iqbal,
There is a service pack in the following link
https://www.sdn.sap.com/irj/sdn/businessone?rid=/webcontent/uuid/807d22cb-cb1d-2b10-8794-fb76d7feca88 [original link is broken]
There is a fix pack 03 included in the folder, I don't know if this is relevant.
Cheers

Similar Messages

How to connect Crystal Report 2008 server with SAP BI/BW server

Hi ,
I have downloaded the 60 Days trial version of "Crystal Report 2008 Server' from sap site to my machine. Now i would like to connect this Crystal server with SAP BI and want to use the data of BI Bex queries and Infoproviders.
Can you please guide me how to connect them?
Aslo how can i get the free trial version of Intergration kit ..here please provide me the entire full path of site(to download the Integration Kit).....
Any inputs would be appreciated!!
Regards,
Naween

Hi Michelle,
Older versions of CR would allow you to run CR from a network share point but you still had to have a license for each user. Current versions of CR do not allow you to do this any more, possibly using a Citrix or Terminal Server would allow this but you still need a license for each user. Older versions had a Network install option.
And as suggested exporting to PDF or some other format is fine for end users viewing your output. They are not using CR but Adobe Reader or Word etc. to view the reports, they just can't use the Designer to view the reports.
Hope this is clear now?
Thank you
Don

Crystal Report 2008 included with SAP integration Kit

Hi
We want to know the crystal report 2008 come with SAP integration Kit

Take a look into the following document:
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/004aacbb-4983-2b10-8da7-cdff5dcbb948
It might help.

Integrate the Crystal Reports 2008 SP1 with SAP R/3

Hi Experts,
I have a requirement to integrate Crystal Reports with the SAP R/3 . I'm new with this kind of integration and need help because I need to create a report based on the R/3 data.
I have read some posts from this forum especially on the integration kits - SAP forum but still don't have any idea on how to do it?
I already installed the BusinessObjects Enterprise XI 3.1 and also Crystal Reports 2008 SP1. I also download the Integration Kits -SAP installer from the SAP Marketplace but when I tried to installed it, I get stuck because it need information for BW publisher.
As for your information, we don't use any BW server because we only use R/3.
Can anyone help me where to start on this integration?
Thanks,
-Syahida-

Hi Stratos,
You're right regarding the transport files. My basis team able to transport that file but when I try again to connect from Crystal Report to R/3, it come out with other error like " Connect to SAP gateway failed" and " partner 202.171.46.161 :3300 not reached"
What I did were :
a) Click on blank report
b) Create New Connection
c) SAP Tables, Cluster
Did I do any wrong here because the error cameout after I did all the step above ? When I look out on the error, it seems like it need to use port 3300. Is there any specific port required for the integration? This is because if the integration through SAPGui, it should used port 3200 and if go direct using SAPRouter, it will use port 3299.
Really need your expertise here or any document that I can refer because the standard document for integration kit for SAP did not mention anything about the port.
Thanks and Regards,
-Syahida-

Crystal Reports background processing for SAP Business One 8.8

Dear Partners,
I have an SDK program developed in SAP Business One SDK that works in 2007, it calls crystal reports externally and can be executed as a background task using the windows schedular or from the command prompt.
My problem is it does not work under SAP Business One SDK 2008 PL18 with SQL Server 2008, Visual Studio 2008.
I receive the following message after this line in my code,"oReport.PrintToPrinter(CopyNo, False, 0, 0)".
'CrystalDecisions.CrystalReports.Engine.LogOnException: Logon failed.
Error in File XX_Report_Ver_0.01 {1A6620A2-5D73-49D2-9347-32ED068AA64E}.rpt:
Unable to connect: incorrect log on parameters. ---> System.Runtime.InteropServices.COMException (0x8004100F): Logon failed.
Error in File XX_Report_Ver_0.01 {1A6620A2-5D73-49D2-9347-32ED068AA64E}.rpt:
Unable to connect: incorrect log on parameters.
   at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetLastPageNumber(RequestContext pRequestContext)
   at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.
   at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at BGProductionRpt.ECR_Common.ECR_PrintReport(Int32 CopyNo) in C:\SDK Development\8.8\test\XX_Rpt\ECR_Common.vb:line 485'
My Question is what Crystal Reports libraries or other method should I be using ?
Crystal Reports 2008 for SAP Business One eg. 51038978.zip - downloaded from portal obviously dosn't contain the CrystalDecisions libraries.
Crystall Reports 2008 - cr2008_sp3_fullbuild, cr2008fp33.exe, cr2008fp33_mm, cr2008fp33_clickonce - also download from the portal, the cr2008_sp3_fullbuild does contain the crystal decisions libraries.
Finally other choices are crystal reports included with the visual studio 2008 and crystal reports full version direct from Business Objects.
I have tried different versions of crystal decision libraries- eg, 12.0110 or 12.02 but still no joy.
Also if I manage to get the report to fire what should the client be running eg, if they have the Crystal Reports 2008 for Business One do they also need to install the Crystal Reports Run time - cr2008fp33_clickonce.
Any help would be appreciated.
Thanks.

Hi John
Since the SDK works in 2007 it will be using the OLD DB access method.
Change the Crystal report to use an OLE DB datasource rather than the SAP Business One data source.
Regards
Rob

Crystal Reports transport files for SAP APO / SCM

Hi there,
Problem: we want to use Crystal Reports on top of SAP APO / SCM and have some difficulties getting the definitions of BW / OLAP servers right and don't know which transports to import on the SAP to report with Crystal.
System is a SAP SCM system with APO module. There is a cube in this module (because there is some internal BW system) and I can see the cube in Crystal Reports. When I want to report from this cube I get an error:
"/CRYSTAL/MDX_GET_STREAM_INFO" not found.
This means some transport files were not imported and some functions are missing.
The following transports are missing:
====quote from transports_EN.txt included in transports for Crystal Reports=====
The following files must be used on an SAP BW system:
(These files are Unicode enabled.)
Content Administration transport (K900579.r21 and R900579.r21)
Personalization transport (K900580.r21 and R900580.r21)
MDX Query Connectivity transport (K900581.r21 and R900581.r21)
ODS Connectivity transport (K900582.r21 and R900582.r21)
===========================================================
My SAP BASIS expert refuses to import these transports in SAP SCM, because he thinks it is not an SAP BW system as listed in the above transports_EN.txt file. Just trying is not an option because transports cannot be removed once imported...
In my opinion these transports have to be imported to clearly access the cube and will work on SAP SCM even if it's not a 'dedicated' SAP BW environment. In other words, these transports should be imported and will work on SAP OLAP servers like SAP BW, SAP SCM, SAP SRM (APO) or SAP SEM.
Does anyone of you have some more experience on reporting from SAP SCM / APO cubes and if I can import these transports without getting some nasty errors, because its not an SAP BW system?
Kind regards!
Edited by: J. van de Mheen on Mar 3, 2009 4:21 PM

Thanks for your reply, but this is not helping me much.
Let me explain more.
In the transport_EN.txt file we see this:
If your SAP system is running on a 6.20 *BASIS system* or later, you must use the files listed below:
(These files are Unicode enabled.)
* Open SQL Connectivity transport (K900574.r21 and R900574.r21)
* Info Set Connectivity transport (K900575.r21 and R900575.r21)
* Row-level Security Definition transport (K900576.r21 and R900576.r21)
* Cluster Definition transport (K900585.r21 and R900585.r21)
* Authentication Helpers transport (K900578.r21 and R900578.r21)
The following files must be used on an *SAP BW system*:
(These files are Unicode enabled.)
* Content Administration transport (K900579.r21 and R900579.r21)
* Personalization transport (K900580.r21 and R900580.r21)
* MDX Query Connectivity transport (K900581.r21 and R900581.r21)
* ODS Connectivity transport (K900582.r21 and R900582.r21)
So I have to import 5 transports in SAP BASIS system and 4 transports in SAP BW system to make full use of the integration kit.
SAP SCM / APO is basically a BASIS system, so the BASIS expert says only those 5 transport have to be installed.
But SAP SCM / APO is also having some reporting capabilities and stores data in OLAP cubes (Infocubes).
In Crystal I can see these cubes when using SAP BW MDX connection.
To make the error go away, I must have some function modules used in transport 'MDX Query Connectivity transport. But the BASIS expert doesn't want to import this transport, because it is listed as a transport for a SAP BW system and he says SAP SCM / APO is NOT a SAP BW system (it's a BASIS system).
And now I have to get some proof that this transport has to be imported in the SAP SCM / APO BASIS system before he installs it...

Crystal Report Dynamic Parameter for SAP B1 version 8.8

Hi, does anyone have problem with the dynamic parameter prompt for Crystal Report in SAP B1 version 8.8?
For example:
1. For static parameter that allows multiple value --> In SAP B1 v8.8, there is a check-box and a "..." button next to it. When you click the "..." button, a new window appear with a list of values to choose.
2. For static parameter that does not allow multiple value --> In SAP B1 v8.8, there is one field with a drop-down menu.
3. For dynamic parameter that allows multiple value and does not allow range values --> In SAP B1 v8.8, just one field for us to key in the value. Shouldn't this be the same as No. 1?
4. For dynamic parameter that does not allow multiple value and does not allow range values --> In SAP B1 v8.8, same as No.3 above. Shouldn't this be the same as No. 2?
How do I get no. 3 dynamic parameter that allows multiple value and does not allow range values to have a check-box and a "..." button next to it to allow us to select multiple values?

Hi Shwu Hua Gan,
Thank you for your reply.
Please forgive me as I don't really understand what you are saying here. To be honest, I'm very new to Crystal Report and my understanding of CR is just the very basics. I'm actually not from a technical background which makes it more difficult.
In your reply:
Ie, you create a parameter in Crystal report, and by using the token eg:Mytest@select * from OCRD, it gives you the benefits of selecting the list from the database.
How do you do this by using the token? All I did is just select the parameter type (dynamic) and then select the table. When I preview the report in SAP B1 8.8, it doesn't prompt me like how I expect it to be. It is a blank field that I have to key in the value myself and then only the report will generate. Sometimes I don't remember what value to key in, so I have to do a formatted search for the blank field. After the report is generated, I can reselect the value (multiple values) from the CR viewer panel toolbar and refresh the report.

Connecting SAP Crystal Report with EHP6 FOR SAP ERP 6.0

Hello Everyone!
I have downloaded SAP Crystal Report demo 30 days and we have an IDES for "EHP6 FOR SAP ERP 6.0", how can I make some reports and train myself with crystal report?
I don't understand how to make the connection to our SAP DB, can you help me?
Thank you!
Denis

Ok solved.
- I assure where is the saplogon.ini (in my case: %appdata%\SAP\Common\saplogon.ini)
- I open the saplogon.ini with notepad and set the UTF format and than save it replacing the original one if it was not in UTF format
- I go to : control panel>system>advanced>environment variables>system variables and I create a new one with name "SAPLOGON_INI_FILE" and path "C:\Users\....\AppData\Roaming\SAP\Common\saplogon.ini";
- Open SAP Crystal Reports 2013 (in my case) > VIEW > Preferred Viewing Locale > (here I set the language of the SAP System I am going to log on with crystal report, in my case was in english so I set English)
- (within SAP Crystal Reports 2013) > FILE > Log On or Off Server... > Create New Connection > SAP Table, Cluster, or Function > (now it shows me all the different SAP Systems that are also in the SAP GUI Logon, choose one, set the client-username-password and then finish)
Thank you,
Closed.

Crystal Reports 2008 Runtime for 64 bit iis

I have just finished developing several reports on my 32 bit developer machine. My application is an asp.net web application using DotNetNuke. I am not trying to use the Crystal Report Viewer. I am exporting the report document to a pdf. On the developer machine everything works as expected.
I moved the project to production which is a 64 bit windows server running iis 7.*
I quickly found the issue of the cr runtime not being compatible with 64 bit compilation. I changed the application pool to run in 32 bit mode.
Now I am getting the following error:
An unhandled exception occurred and the process was terminated.
Application ID: DefaultDomain
Process ID: 3152
Exception: System.Runtime.Serialization.SerializationException
Message: Type 'CrystalDecisions.CrystalReports.Engine.LoadSaveReportException' in Assembly 'CrystalDecisions.Shared, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' is not marked as serializable.
StackTrace:    at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.InitSerialize(Object obj, ISurrogateSelector surrogateSelector, StreamingContext context, SerObjectInfoInit serObjectInfoInit, IFormatterConverter converter, ObjectWriter objectWriter)
   at System.Runtime.Serialization.Formatters.Binary.ObjectWriter.Write(WriteObjectInfo objectInfo, NameInfo memberNameInfo, NameInfo typeNameInfo)
   at System.Runtime.Serialization.Formatters.Binary.ObjectWriter.Serialize(Object graph, Header[] inHeaders, __BinaryWriter serWriter, Boolean fCheck)
   at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Serialize(Stream serializationStream, Object graph, Header[] headers, Boolean fCheck)
   at System.Runtime.Remoting.Channels.CrossAppDomainSerializer.SerializeObject(Object obj, MemoryStream stm)
   at System.AppDomain.Serialize(Object o)
   at System.AppDomain.MarshalObject(Object o)
Any help would be appreciated as I am to demonstrate the reports to my board next week.

I'm going to guess you are trying to store the ReportDocument in session, and your IIS server is setup to save session objects on a state server, or something other than the default of inProc which requires objects to be serializable, unfortunately most objects within the Crystal Reports SDK are not serializable.

No SAP Datasources or SAP Toolbar in Crystal Reports 2008

I cannot see the SAP toolbar or SAP datasources under "Create New Connection" in Crystal Reports 2008 SP1.
After reading many threads on SDN and reistalling Crystal Reports 2008 SP1 and the BOBJ SAP Integration Kit many times I have not been able to get this to work. I have installed the following in order:
- SAP GUI for Windows
Release: 710
Build: 1046700
Patch Level: 12
includes the BW 3.5 AddOn and BI 7 AddOn
Crystall Reports 2008 SP1 which I installed all components except Legacy XML Export.
Business Objects XI Integration Kit XI 3.1 for SAP which I installed all desktop components and all server components excluding web content and SDK. This was a local install on my PC.
I have ensured that I have only one instance of SAPLOGON.ini on my PC.
I have not applied the transports yet because I want to see the SAP datasources and SAP toolbar in Crystal Reports before I progress.
We do not have Business Objects Enterprise and I'm not sure what "BOE 3.1 Client Tools" is referred to earlier in this thread. My understanding is that in addition to SAP and BW we just need Crystal Reports 2008 and the SAP integration kit.
We are on ECC6 and BW 3.5.
I hope someone can help.

Hi Stratos,
Thanks for your response. I finally got this working. My issue was that I originally used the Crystal Reports 2008 and BOBJ Int Kit downloads from the SAP support portal. I checked with another SDN user Steven Dierick - thanks Steven - for the version of Crystal Reports 2008 he was using (version 12.0.0.683).
I downloaded Crystal Reports 2008 version 12.0.0.683 and the BOBJ Int Kit from the downloads section of sdn and it works!! SAP Toolbar, datasources and everything.
Considering I'm using Crystal Reports 2008 SP0 are there any disadvantages of not using Crystal Reports 2008 SP1?
If I'm better off using SP1 where should I download Crystal Reports 2008 SP1 and the appropriate BOBJ SAP Integration Kit?
cheers,
John

Crystal Reports 2008 - SAP B1 Integration

Hi
I had received the CD from SAP which contained Crystal Reports 2008 Basic for B1. The installation went very ok and i am able to Launch Crystal reports 2008 from outside SAP B1. (Program File, Business One, Crystal 2008)
However, i do not see the SAPCrystalSetup.exe either in the CD i received or on the portal to download anywhere. (Which is used for integrating SAP B1 and Crystal report). This utility according to the technical tips for installation mentioned in https://websmp103.sap-ag.de/~sapidp/011000358700000727712008E.htm will enable SAP B1 menu with Crystal reports integration sub menu options
Can any body help
regards
Manian

Hello Manian,
I recommend to post this query to the [Integration Kits - SAP|BusinessObjects Integration Kits; forum.
This forum is dedicated to topics related to the BusinessObjects Integration Kit for SAP.
It is monitored by qualified technicians and you will get a faster response there.
Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

BO-CRYSTAL REPORT 2008--" FUNTION MODULE /CRYSTAL/MDX_GET_STREAM_INFO"

I'm working with BO Edge series , when I execute the query in Crystal Report 2008 , integrating with SAP BI 7.0 im getting the error as follows "Database connector error : 'function module' /CRYSTAL/MDX_GET_STREAM_INFO" not found . if any one come across and solved the above error. Kindly let me proceed with the above issue.

Hi,
take a look here:
Install Part #1
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-1-of-4
Install Part #2
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-2-of-4
Install Part #3
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-3-of-4
Install Part #4
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-4-of-4
Crystal Reports connectivity for SAP requires ABAP Transports to be imported to your system.
Ingo

How to view multiple reports using crystal reports 2008

Hi ,
I am working on vb6 project where in i am trying to generate reports using crystal reports 2008.
For this , i am making use of Interop Form Wrapper class in vb6.
I have a business requirement where in i need to view multiple reports on my screen.
please suggest me as to how this can be achieved.
Thanks in Advance
Regards,
Ramnath

Hi Ludek,
I am directly now using crystal report viewer control in my vb6 project.
As mentioned in previous mail, i have created a Interop Wrapper class over crystal report viewer control in .Net using visual studio 2008 and i am making use of wrapper class in my vb6 project.
I am able to access all the properties that have been defined in my Interop wrapper Class but the only stuff i need is to view multiple reports generated one after the another for a single button click Event.
Please find below the code that iam using to load and generate reports.
Note:
1. frm is the instance of my Interop Wrapper Class built over CR viewer control
2. All the user defined methods of Wrapper class that you see below will internally call the actual crystalreportviewer   properties defined in my Wrapper class
Say for e.g   frm.DisplayToolbar(True) will internally execute crystalreportViewer1.DisplayToolbar = True
frm.SetReportSource(strRptFilePath,0)
frm.SetSelectionFormula(strrecordSelectionFormula)
frm.DisplayToolbar(True)
frm.ShowExportOption(True)
frm.ShowPrintOption(True)
frm.ShowRefreshOption(True)
frm.ShowPAgeNavigateOption(True)
frm.ShowZoomOption(True)
frm.ShowParameterPanelOption(True)
frm.Show()
Thanks in Advance
Regards,
Ramnath

Crystal Report 2008 compability

Hi,
I am not sure if this is the right place to post this but is Crystal Report 2008 compatible with Windows 7 on both 32bit and 64bit versions?
I went to the SAP link below but not quiet sure about the specs details.
Technical Specs tab include:
Operating systems: Microsoft Windows XP with Service Pack (SP) 2, Windows Server 2003 with SP1, or later
*** http://store.businessobjects.com/DRHM/store?Action=DisplayProductDetailsPage&SiteID=bobjemea&Locale=en_GB&ThemeID=28229900&Env=BASE&parentCategoryID=57903600&categoryID=57904900&productID=100546100
Thanks,
DT

HI DT,
Check below document for supported platforms for Crystal Reports 2008 sp4. Go in crystal reports help, about crystal reports and check crystal version first then check this document.
SAP Crystal Reports 2008 SP4 for Windows - Supported Platforms
Thanks,
Sastry

Unable to Connect Crystal Reports 2008

Hii All,
Plz help...I am unable to connect to my Crystal Reports 2008 software with SAP Buiseness one.
When i create new connection from the Database Exoert ->Selected SAP Buiseness One->After Selecting ->Asking Creditintials like License server Server Type, But when it comes to Company Databae>Drop down the company i am not getting the company list??
Please let me know the Problem and Solution
Thanks & Regards
Cherry

Good days,
Because you enter invalid SQL Server authentication.
Please enter your :
License Server : localhost
Database Server Type : (your sql server version)
Database Server : (your database connection) eg : localhost\SQLEXPRESS
Click the DOT( . ) button.
Database User ID : (your sql ID) eg : sa
Database Password : (your sql Password) eg: p@ssw0rd
Then click connect server.
If Successful then
Company Database : eg : SBODemoUs
Username : manager
Password : manager
Else
Goto (Please enter your
End If

Urgently required Crystal Reports 2008 FixPack_03 for SAP B1 8.8

Similar Messages

Maybe you are looking for