Urgently required the procedure of cycle count open interface

Hi friends
I am a beginner in oracle apps .I want to Know the exact procedure for
cycle count open interfaces.
I want to know
1>how interfaces are developed ?
2>how many tables are used ?
3>how validations are done ?
Kindly co-operate me....
thanks....
Email:[email protected]

Hi David
I want to know the procedure for cycle count open interface i.e.
1> How the data from flat file is uploaded in oracle INV
How many Tables are needed?
2>What validations are required ?
3>How these validations are performed ?
If you have any document pls send it to me at :
[email protected]
thanks for ur responce ......

Similar Messages

I need validation code for cycle count open interface

Hi friends i require the validation code for the
cycle count open interface .
can anybody help me .......
Message was edited by:
user506929

Hi David
I want to know the procedure for cycle count open interface i.e.
1> How the data from flat file is uploaded in oracle INV
How many Tables are needed?
2>What validations are required ?
3>How these validations are performed ?
If you have any document pls send it to me at :
[email protected]
thanks for ur responce ......

Step to Configuration the Physcial Inventory & Cycle counting

Guru
PL help Me the detailed steps to configure for Physical Inventory & cycle counting required
Thanks
sudhir

hi
you have to do the settings
Materials Management -- > Inventory Management and Physical Inventory --> Physical Inventory & Inventory Sampling
Field Selection for Physical Inventory
Default Values for Physical Inventory
Settings for Physical Inventory
Default Values for Batch Input
Maintain Copy Rules for Reference Documents
Allow Freezing of Book Inventory Balance in Storage Location
Create Inventory Sampling Profiles
Define Stock Management Levels
Define Stock Management Levels in WMS
Cycle Counting
Activate Distribution of Consumption Differences

Regarding Cycle Count Entries

Dear All,
I am doing cycle counting in which I have 10 Items in my subinventory. I have completed ABC Analysis and classified first 2 items as A and next 3 item as B and remain 4 items as C. Even I have performed Cycle Count as well.
In Cycle count entries i am not able to enter count quantity for my entire 10 items instead it is showing only 6 items only. Why I was not able to see remaining 4 items and how do I enter count quantity for those missed 4 items?
What would be the solution if i want to see all my 10 items in in cycle count entries form?
Edited by: SaroR on Jan 20, 2010 6:58 AM

Can you check mtl_cceoi_action_pub.import_CountRequest api?
Please make sure you carry out the following before calling the API.
1. Create a Cycle Count
2. Enter a Manual Cycle Count Entry.
3. Run program "Perform Complete Cycle Count" to generate generate cycle count request
4. Post the count Entries using the by calling the API using your Script.
Check the following MOS notes.
Cycle Count Request Import (MTL_CCEOI_ACTION_PUB API) Fails When Using Serial Number Multiple Per Request [ID 1468453.1
Cycle Count Api Not Working For Scheduled Counts [ID 786497.1]
The Cycle Count Open Interface Is Not Working For The Stock In Api [ID 818977.1]
Cheers,
ND
Use the "helpful" or "correct" buttons to award points to replies / Mark the thread as answered, if your question is answered.

Cycle Counting procedures in ECC 6.0

HI all.,
SUB: Cycle counting in ECC 6.0 with WM implemented
Ref : Industry : Apparel
What would be the differences in the cycle counting procedure working on Version 4.6C and ECC 6.0.?
In 4.6C , we normally change the indicators of A,B,C or D in OMCO and set the parameters of frequency of cycle counting , say yrly, half yearly, quarterly or monthly.
Would the cycle counting procedure be the same with ECC 6.0?
I understand that from Version 5.0, we can do cycle counting without freezing the book stock i.e have open transfer orders unlike in 4.6C wherein we have to stop GR or GI at the time of cycle count.
Is the procedure same in ECC 6.0 ?
Do educate further on the Cycle count procedure for ECC 6.0 with WM implemented for an AFS related industry.
Thanks

Hi,
Try this it worked for me though,
1. Goto SPRO_ADMIN
2. Select the Project
3. Choose Change
4. Go To Transport Requests TAB
5. Activate CTS Functionality
6. Save it after the Pop Up
7. Go to Se10 and check if the Project Field is getting Populated with the Desired Project or not.
Regards,
Nitin

Cycle count procedure

Hi,
The below is the issue my user asking for.
there are B items are to be counted 6 times a year (Once every two months)..
For example:
If plant A has 1000 B items then 500 should be counted in month one and 500 should be counted in month 2.
However, it seems that all the B movers are in the same month thus the cycle count is for ALL items.
User asking why all items fall inonr month when he creates phy.inv docs in MICN.
Please help.
Regards,
amar

Hi
Cycle counting is a method of physical inventory whereby material is inventoried at regular intervals within a fiscal year. These intervals or cycles depend on the cycle counting indicator set for the material.
Cycle counting allows fast-moving items to be counted more frequently than slow-moving items, for example.
All materials to be included in the cycle counting inventory are flagged. This is done either manually, using a cycle counting indicator in the material master record (storage data), or automatically, by means of an ABC analysis. The cycle counting indicator allows you to classify materials into individual cycle counting categories (for example: A, B, C, D) In Customizing, you can set for each category how often the materials are inventoried.
You can flag materials that are to be included in cycle counting as follows:
Manually in the material master record (storage data)
Automatically using ABC analysis.
      You can use program RMCBIN00 to carry out an ABC analysis, which assigns materials to each category according to consumption or requirements. You can choose whether the analysis should only include materials with cycle counting indicators or all materials. The cycle counting indicator can be automatically updated in ABC analysis.
To plan the cycle counting inventories, start the RM07ICN1 cycle counting program at regular intervals. This program checks the due dates for inventories for all cycle counting materials.
If it is time for an inventory for a certain material, use the program to create a batch input session to create physical inventory documents. Physical inventory documents are only created for stock type 1 (unrestricted use). The planned inventory count date is calculated as follows:
        Date of last inventory + pre-defined interval
The interval between inventories for each cycle counting indicator is set in Customizing.
Use the batch input session to create the physical inventory documents.
Now you can carry out the inventory. When the difference is posted, the actual inventory count date is recorded in the material inventory data as the date of the last inventory.
Regards
Ram

Can i get script for the standard program 'Generate cycle count requests'

Actually we have huge records available in *'Cycle count open requests listing'* report and its because of the *'Generate cycle count requests'* program created many records on particular date in mtl_cycle_count_entries table. Can anyone help to provide the script or the logic on what basis the Generate cycle count requests' program retrieving data

Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
**If other missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
**If other missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up

What's the average cycle count and lifespan of a PB G4 battery?

I've had my computer 15" Powerbook for about 22 months. Cycle count =367. My AppleCare warranty ends in about 14 more months. What's the average cycle count before the battery dies?
By the way, I use my computer everyday. This thing better than any other macbook pro out there. Thanks.

First, you should know that Applecare doesn't cover the battery, it is specifically excluded unless it's defective. That's because Apple considers the battery a consumable item. You can read it under limitations at http://images.apple.com/legal/applecare/docs/AppleCareProtect_Plan_NAen.pdf
Regarding the life, how you maintain the battery has an impact on how many cycles you get out of it. For example, if it's plugged in all the time, your cycle count will be low by the time the battery fails. Apple says that a properly maintained battery should be at 80% capacity after 300 cycles. This is the Apple note on battery maintenance: http://www.apple.com/batteries/notebooks.html

Cycle count inventory

Hi everybody,
When doing a cycle count via tx LX26, the following error appears:
"CC inventory not prepared in IM
Message no. L4173"
I've read some threads regarding this item, and what I have done is the following:
OMNK - activate cycle counting for my warehouse and storage types.
ommb - for number ranges
IMG > Logistics Execution > Warehouse Management > Activities > Physical Inventory > Dynamic Cycle Counting > General Settings > Define Storage Type Settings
omco
article master data (when using mibc all articles appear with the cc indicater filled)
I think I have everything correctly configured and there is no stp missing, but the reality is that I am not able to perform the cycle count.
Any idea?
Thanks

Have you made material master settings ?
Marking Materials for Cycle Counting
This step is only required if you perform cycle counting for the first time or if you want to update the cycle counting indicators.
In the material master record (storage data), maintain the cycle counting indicator for all the materials that are to be included in cycle counting.
You can set the indicator in one of the following two ways:
manually in the material master record. To do this, choose Material ® Change from the Material Master menu.
automatically using ABC analysis To do this, choose Special procedures ® Cycle counting ® Set CC indicator from the Physical Inventory menu.
Edited by: Nick Whitehurst on Aug 12, 2010 4:58 PM

Cycle counting process

Hi all,
Could you please some good link/ notes about cycle counting process.
Sruthi

Hi, Please go through the following.
Cycle counting is a method of physical inventory whereby inventory is counted at regular intervals within a fiscal year. These intervals depend on the cycle counting indicator set for the material.
Cycle Counting allows you to count fast-moving items more frequently than slow-moving items, for example.
General Procedure
Mark all materials that are to be included in cycle counting with a cycle counting indicator in the material master record (storage data). The cycle counting indicator is used to group the materials together into various cycle counting categories (for example, A, B, C, and D). In Customizing for Inventory Management, you can define for each category the time intervals at which the materials are to be counted.
You can use the program ABC Cycle Counting Analysis (RMCBIN00) to perform an analysis. In this analysis, the system assigns the materials to the individual categories according to consumption or requirements. You can also specify whether this analysis is to consider only the materials with cycle counting indicator or all materials. The cycle counting indicator in the material master records can be updated automatically by this program.
For the planning of cycle counting, run the program Create physical inventory documents for cycle counting (RM07ICN1). This program checks all cycle counting materials to determine whether a physical inventory is due to be carried out.
You can create physical inventory documents for the following stock types, as well as unrestricted-use stock (stock type 1):
quality inspection stock
blocked stock
The system calculates the planned count date for all stock types as folllows:
Date of last physical inventory of unrestricted-use stock + predefined interval
If a material needs to be counted, use the program to create a batch input session for creating physical inventory documents. To create the physical inventory documents, process the batch input session .
When the inventory differences are posted, the actual count date is recorded in the physical inventory data of the material as the date of the last physical inventory.
Activities
Marking Materials for Cycle Counting
This step is only required if you perform cycle counting for the first time or if you want to update the cycle counting indicators.
In the material master record (storage data), maintain the cycle counting indicator for all the materials that are to be included in cycle counting.
You can set the indicator in one of the following two ways:
manually in the material master record. To do this, choose Material ® Change from the Material Master menu.
automatically using ABC analysis To do this, choose Special procedures ® Cycle counting ® Set CC indicator from the Physical Inventory menu.
Creating Physical Inventory Documents for Cycle Counting
From the Physical Inventory menu, select Special procedures ® Cycle counting ® Create physical inventory documents.
Enter the data required.
Carry out the evaluation.
Choose Edit ® Generate session to create the batch input session.
Select System ® Services ® Batch input ® Edit from the menu to process the session.
Carry out the physical inventory for the physical inventory documents created.
Thanks,
DV

Report for materials which have not been cycle counted.

Hi,
Is there any report which can show me materials which have not been cycle counted and also materials which have been cycle counted with the cc date?
Sincerely,
Nicky

Hi,
As of my knowledge, there is no standard report which can fulfill your requirement. You may go for development. Please check the similar thread: Cycle count analysis report
Regards,
AKPT

Cycle count and inventory document generation

hi.
Currrent Scenario : Cycle count has been configured for Quarterly cycle count for 20 materials.
Float period has been set for 5 days.
Procedure : Customer wants to do inventroy count for the 20 materials at the rate of one material per day.
Question : 20 Materials falling under "C" quarterly cycle count show up for Physical inventory.
Can the customer create an inventory document for <b>inventory count each day for each material</b> or will they have to create 20 inventory documents for count at one go since the float period is set for 5days.
Will the float period indicated play a part if the physical inventory is planned for each material on separate days.
Or if an physical inventory has been planned for the quarterly managed material, all material in that category say "C" would anyway show up during the quarterly inventory cycle count period.And the inventory count can be done for each material on seperate days.
Thanks

hi Arif.,
Earlier situation : Cycle count procedure was only A.
Present situation : Cycle count procedure is now ABCD .
But only C.c indicator A is still active for all material. We have not
changed the Cc indicators for any material.
Transported to production on Friday.
My question is :
On monday ,when the batch program was executed for printing of inventory
documents, Why does it generate a whole lot inventory documents for
Materials which have not been inventored even when the C.c indicators
remain A for all the Materials.We have not even in-corporated the
Quarterly cycle count indicators for the few selected materials.
Should the system:
1. Print Inventory documents only for the current period or
2. Is the system behaving properly due to the change in Cycle count?
Only the Cycle count procedure has been changed to 4 times in a fiscal year.
Do review the information and update me.

Cycle Counts in 11.5.9

Running a cycle count by period. Cycle count was established to start on 27-Aug-07. Created the Perform full cycle count (Report Set) which runs every month...however in September the auto schedule in the cycle count form has the next date as 24-Sep-07 yet the report set which is set to run monthly will run on the 27-Sep-07...and this disconnect will continue month after month. Did I miss something obvious in set up or is there no way to have the report set in synch with auto schedule on the cycle count?
Thanks in advance.

You are not connected to the user that started the database. Please verify the owner of the database processes. You can use the ipcs utility if on linux/unix to verify the owner. Please also verify the owner and permissions of the 'oracle' binary under the RDBMS Oracle Home bin directory to verify that it has the proper owner and permissions. This file should have the suid bit set in its permissions and must be owned by the proper group as well. It should appear something similar to this:
-rwsr-s--x 1 orahelp dba 96735691 Jun 17 2009 oracle
You can find the proper group by examining the 'config.c' file under the RDBMS Oracle Home rdbms/lib directory. It should look as follows:
/* $Header: config_ux.c 115.1 2004/03/27 07:17:12 hfux ship $ */
/* SS_DBA_GRP defines the UNIX group ID for sqldba adminstrative access. */
/* Refer to the Installation and User's Guide for further information. */
#define SS_DBA_GRP "dba"
#define SS_OPER_GRP "dba"
char *ss_dba_grp[] = {SS_DBA_GRP, SS_OPER_GRP};

Cycle Count Scheduling in 11.5.9

Running a cycle count by period. Cycle count was established to start on 27-Aug-07. Created the Perform full cycle count (Report Set) which runs every month...however in September the auto schedule in the cycle count form has the next date as 24-Sep-07 yet the report set which is set to run monthly will run on the 27-Sep-07...and this disconnect will continue month after month. Did I miss something obvious in set up or is there no way to have the report set in synch with auto schedule on the cycle count?
Thanks in advance.

You are not connected to the user that started the database. Please verify the owner of the database processes. You can use the ipcs utility if on linux/unix to verify the owner. Please also verify the owner and permissions of the 'oracle' binary under the RDBMS Oracle Home bin directory to verify that it has the proper owner and permissions. This file should have the suid bit set in its permissions and must be owned by the proper group as well. It should appear something similar to this:
-rwsr-s--x 1 orahelp dba 96735691 Jun 17 2009 oracle
You can find the proper group by examining the 'config.c' file under the RDBMS Oracle Home rdbms/lib directory. It should look as follows:
/* $Header: config_ux.c 115.1 2004/03/27 07:17:12 hfux ship $ */
/* SS_DBA_GRP defines the UNIX group ID for sqldba adminstrative access. */
/* Refer to the Installation and User's Guide for further information. */
#define SS_DBA_GRP "dba"
#define SS_OPER_GRP "dba"
char *ss_dba_grp[] = {SS_DBA_GRP, SS_OPER_GRP};

MIBC - ABC Analysis for Cycle Counting -Report : RMCBIN00

Hi All,
We are trying to have our CC inventory indicators updated by using report RMCBIN00. We noticed that if a have a part with a very high value it is most likely to get indicator A even though the demand for that part is not as high as for a part with a very low price but that we sell thousands. Can some explain how can we use this report in such a way that considers demand? Thanks for your help.

A cycle count indicator A or B or C or D is allocated to material in the material master based on either consumption value (consumption X rate) or forecast value (forecast quantity X rate). You can also specify whether this analysis is to consider only the materials with cycle counting indicator or all materials. The cycle counting indicator in the material master records can be updated automatically by this program.

Urgently required the procedure of cycle count open interface

Similar Messages

Maybe you are looking for