Urging Adobe to provide an install for Flex 2.0.1 along with Eclipse 3.2.2

I feel strongly that Adobe should provide an installer to
install Flex 2.01 along with Eclipse 3.2.2 for Windows
It's nice that we have an update for Flex but in my mind (as
a paying customer) I should have got a full update and not a
partial update. As it is the IDE sucks big time and to know that
there is a new version available but we don't get it with the
update is extremely painful.
This decision on Adobe's part makes me wonder what to expect
in the long run. I mean isn't an update to a newer, improved IDE
also considered an update? After all Flex Builder includes the IDE,
no?
And yes, please don't tell me I can simply go and download
Exclipse and "do it myself". I din't Buy Flex Builder to do this
stuff myself. I expect(ed) full service.
A Disgruntled Flex Builder Customer.

Yes, I can do a lot of things, but I don't want to and as I
said:
>>
And yes, please don't tell me I can simply go and download
Exclipse and "do it myself". I din't Buy Flex Builder to do this
stuff myself. I expect(ed) full service.
<<

Similar Messages

  • I updated to 3.6.15 and every time I open Firefox the Thank You for upgrading window pops up along with my normal homepage. How do I get rid of that?

    I updated to 3.6.15 and every time I open Firefox the Thank You for upgrading window pops up along with my normal homepage. How do I get rid of that?

    This link shows how to do that - https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox

  • Adobe flash impossible to install for iOS

    Hi All, do you know if there is any program for iOS which is replacing Adobe Flash?

    No Flash for iPads, iPhones, or iPods
    Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
    Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
    So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
    Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
    Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash. Adobe is not providing Flash for Apple iOS devices, and they no longer provide Flash for any other cellular phones. Flash is officially gone.
    Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
    A sample of Apps that can display some Flash content:
      1. Puffin
      2. SkyFire
      3. Photon Flash
      4. Browse2Go
      5. Swifter
    Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that."
    Download the Facebook app from the iTunes Store. Sign in with your Facebook ID and Password and you won't require flash to play videos.

  • Providing online Help for Flex-based applications

    I have been asked to provide online Help for a Flex application. As I have never done this before, I have a few questions:
    - What is the format for the Help topics?
    - Are there control-type files (e.g., TOC, index, project file) that need to be created? If so, what is the format for these?
    - Is the Help compiled? If so, which compiler is used?
    - How is context-sensitive Help created?
    I'd also like to know if there are any resources I could look at that covers these Help issues. Thanks.

    Hi,
    You can acheive the same by the addition of [USER-COMMAND fcode].
    RADIOBUTTON GROUP group [USER-COMMAND fcode] - The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
    So you code should be altered as
    PARAMETERS: rb_appl  RADIOBUTTON GROUP rad
                         USER-COMMAND radclick    "Addition which you have to make.
                         DEFAULT 'X',
                rb_pres  RADIOBUTTON GROUP rad ,
                p_file   TYPE ibipparms-path.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      IF rb_appl = 'X'.
        PERFORM f_applictn_server_filenm.
      ELSEIF rb_pres = 'X'.
        PERFORM f_presentation_filenm.
      ENDIF.
    Thanks & Regards,
    Harish

  • Which adobe version should be downloaded for a kindle fire 7 hd with linux?

    which version of adobe should be downloaded for a kindle fire 7 hd with linux?

    To the best of my knowledge you are restricted to what ever applications from the Kindle store. There are few Adobe products other than Reader that have been approved by Amazon for their store. In fact, they offer more apps on their andriod store for other manufacturers than they do on their own Kindle store.

  • I am unable to install OS X 10.9.2 along with iTunes 11.1.5

    I have been unable to install the OS X 10.9.2 along with iTunes 11.1.5

    Try running the combo update.
    10.9.2
    Try downloading iTunes from here.
    iTunes 11.1.5

  • Adobe Air will not install for Mac OS 10.5.8

    When I try to open the installer.app, I get the message: "You cannot open the application Adobe AIR installer.app because it is not supported on this architecture".  I am running OS 10.5.8 on an iBook G4 (1.42 GHz PowerPC G4).  Help, please.  I do not understand the directions for getting the log msgs.

    Hello,
    I'm sorry you're running into this problem.  The error is being caused by the lack of support for the G4 processor in the AIR 2.5.1 runtime.  Please use AIR 1.5.3 instead.
    Thanks,
    Chris

  • Purchases PSE11 but my mac has no disc driver, adobe only provides test version for PSE12

    Can someone give me the downloadlink to a PSE11 testversion? so I can type in my serial numbers and codes into the testversion?
    thanks

    Hi PSEmon,
    Welcome to Adobe Forums.
    Below is the link for Phooshop Elements 11.
    http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
    Please make sure to complete the Very Important Instructions section prior to clicking on the download link.
    Thanks

  • What drivers do I need to install for my MG6360 printer to work with a Mac with OSX10.8.5?

    I have a PIXMA MG6360 printer that needs its software updating to return its full features but the Canon support line in Australia has prescribed several different options with no two alike and none providing the full features I once enjoyed.  'Phone and email support responses are all uniformly poor and I cannot get a straight story from any of the technicians I've encountered so far.  Currently, they've stopped responding altogether!
    I know where to download the latest software, but I'm not clear about which packages I should install and in what sequence and I cannot locate a definitive answer in the knowledge base.
    Can someone tell me which drivers etc I need and the sequence in which I should load them.
    I'm assuming that I have to uninstall the existing software and printer from the Mac (MacBook Pro 15", Late 2012 with OSX 10.8.5) first.  That's about the only thing the techs agree on so far!
    Also, does Canon update its software periodically and provide either automatic downloads or email warnings to update its users?
    All help gratefully recieved.

    With reference to this article from Apple that lists the models of printer drivers available from Apple for Lion and Snow Leopard, there are a couple of HP Photosmart 55xx printer drivers in the list. So if all was well with your  iMac then the driver should be downloaded and installed when you connect to the printer. With this not happening you can try installing this HP Driver update. It contains all the HP models in that driver list - that's why its over 500MB - and it may be just what you need to get this printer connected.

  • Adobe Reader 8.1.2 for OS-X 10.4.11 with Epson EPL-5900 L  prints only squares

    My iMac with OS-X 10.4.11 installed and using Adobe Reader 8.1.2 prints the pdf-documents only as squares, no words are visible !
    Why ? Could someone help me ?
    Thank you
    Martin

    >In all my years of using free Acrobat (now reader? - why the change in name?
    The name was Adobe Acrobat Reader until version 5.0. As of 6.0 (2003)
    they changed it to Adobe Reader.
    >
    > what(): Unable to determine registration filepath!
    Could be this issue:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=333592
    Aandi Inston

  • How long should a new battery last when installed for a mac book pro 2009 with only a web browser opened?

    I recently went to the apple store in Covent garden and had a battery replaced for my Mac Book Pro 2009 edition. 
    After fully charging the mac the percentage guage meter displays the battery is losing power fast. 1% increments goes down every 5 minutes even if I have only a browser which is opened and no other running applications. 
    My recent test after a fully charged mac book pro allowed me a maximum use time is 2 hours! 
    I have friends and family members who have the same model as me and their mac book when running on battery, shows that the laptop has about 6 hours use.  They are able to run multiple applications and use sites such as Youtube and still get a good 4 hours of use.
    Anyway, I have booked an appointment with a Mac Genius for tomorrow to look into this issue. 
    I thought I'd just ask the community to find out if any of you can help.
    Many thanks in advance.

    Thank you Donald.
    You are the second person to tell me this so this is more of a reason for Apple to sort out issue for me.
    The team there don't believe there is an issue with the battery.
    Thank you once again.

  • Is there any harm in installing an older version of Acrobat along with the new version?

    I'm running Acrobat v11.0.04 on my iMac. For my work, I have to create pdfs and upload them to a special server that then generates dynamic versions of them (blah blah blah... I don't really understand that part of it...). Anyway, it can't use PDFs created by this version of Acrobat... or the last few versions, for that matter. So... is there any harm in installing version 8 (which does work) on my iMac? I don't want to get rid of version 11... I want to have both.
    Thanks!
    julie

    I am not sure anyone knows what the server needs. We just know what doesn't work. What DOES work are the pdfs I compile (I have to combine two pdfs into one) are the ones created from version 8. I will ask if I can get specifications. It's confusing because I create the pdfs and send them to someone else. He uploads them to this server which is run by another company. So there are a lot of different levels involved. All I know is that every time a new version of Acrobat comes out, I create a test pdf and it doesn't work. I always have to go back to version 8. I recently bought a new computer and didn't want to install version 8... but unless we can figure out  a way to generate the "right" pdfs, it looks like I  might have to. Anyway, I'll see what I can find out.

  • Pl explain in detail how to install canon lbp2900b in my mac along with links and patchers

    i am new to mac so please help me out with detail description reg canon lbp2900b printer

    Search using
    "canon lbp 2900 install mac"  and see http://www.usa.canon.com/cusa/support/consumer

  • After Install of OS X Dock missing along with other problems

    I just did some hardware upgrades to my Macbook. After the reinstall and reloading everything from time machine, my dock is gone. I have gone into the dock settings and played with them. I originally had it hiding. It did try to come up once, but it only came up half way and went back down. Also the expose and dashboard f-keys don't work, but the brightness and volume keys do.
    There is also a very small flashing... something in the bottom left of my screen about the size of a pen head. That is where my hot corner for showing the desktop is supposed to be, but it doesn't work either.
    Any help is greatly appreciated!

    Just realized that the OS upgrades hadn't happened yet... doing updates now.

  • I want to determine the perfect values for the motor ... along with its pid values

    I'm ne to labview and this is my second program.... i designed a motor which maintains constan speed with varying load..... the problem is i dont know the real values of any motor. . .  and as the inertia across the load decreases the speed oscillates a lot . . . and i'm even not happy with the current(I(A)) readings ... they dont follow the motor characteristics i think . . .  can someone please point out the mistakes and clarify them for me ... 
    thanks in advance
    Attachments:
    Motor1_4.vi ‏304 KB
    Control 10.ctl ‏6 KB

    Hi Rahul,
    Please find below the require info:
    4.6 B                                   ECC 6.0
    'POPUP_TO_CONFIRM_STEP'               POPUP_TO_CONFIRM
    'TABLE_COMPRESS'                    Not obsolete
    'TABLE_DECOMPRESS'                    Not obsolete
    'WS_QUERY'
    'WS_UPLOAD'                         GUI_UPLOAD”
    'DISPLAY_BASIC_LIST'                    Not obsolete
    'POPUP_TO_DECIDE'                    POPUP_TO_CONFIRM
    'CLPB_EXPORT'                         Use class CL_GUI_FRONTEND_SERVICES
    'HELP_VALUES_GET_WITH_TABLE'          F4IF_INT_TABLE_VALUE_REQUEST
    'DISPLAY_GRID_LIST'
    'WS_DOWNLOAD'                    GUI_DOWNLOAD
    'POPUP_TO_GET_VALUE'               Not Obsolete
    'POPUP_TO_GET_DATE'     
    'DOWNLOAD'                    “GUI_DOWNLOAD”
    'WS_FILENAME_GET'                    KD_GET_FILENAME_ON_F4
    'READ_EXCHANGE_RATE_N'
    'CONVERT_DATE_INPUT'               Not Obsolete
    'DB_COMMIT'                    Nott Obsolete
    'WS_EXCEL'                         WS_DOWNLOAD and then execute WS_EXECUTE
    'STRING_SPLIT'
    'HELP_VALUES_GET'               F4IF_FIELD_VALUE_REQUEST
    'CHECK_IBAN_ACTIVE'
    'POPUP_TO_CONFIRM_WITH_MESSAGE'          POPUP_TO_CONFIRM.
    'POPUP_TO_CONFIRM_LOSS_OF_DATA'          POPUP_TO_CONFIRM
    'SYSTEM_GET_UNIQUE_ID'                    SYSTEM_UUID_C_CREATE
    'TR_RELEASE_COMM'
    'GRAPH_DIALOG'
    'CONVERT_TO_LOCAL_CURRENCY_N'
    'WS_FILE_DELETE'                              GUI_DELETE_FILE
    'WWW_GET_MIME_OBJECT'
    'GET_FIELDTAB'
    'HELP_VALUES_GET_NO_DD_NAME'          F4IF_INT_TABLE_VALUE_REQUEST
    'FI_DOCUMENT_ARCH_READ_SINGLE'
    Thanks
    Piyush
    Reward point, if helpfull.

Maybe you are looking for