URI-Access doesn't work

I use the xml-databases first time (9.2.0.6) - it works very well (also with register schema and the sql-select) - but the access via http://localhost:8080/oradb/etc. isn't possible (with the standard-xdbconfig.xml) - Has anybody an idea, what's wrong? It could be problems with the dburi-servlet?
Thanks Peter

Peter,
Is the listener on your 9.2.0.6 database set up to connect to ftp and http sessions?
lsnrctl status
should show (Presentation=HTTP (Session=RAW) and (Presentation=FTP)(Session=RAW)
These lines should identify which port your http and ftp are on. These two ports should match what is in the xdbconfig.xml <ftpconfig> and <httpconfig>

Similar Messages

Creative Live wireless webcam - DDNS or any other outside access doesn't work

Bought the Creative Live Wireless webcam. Works inside my network, but DDNS server offered by Creative has been down for weeks now, so I can't use this service. The remote IP access also does not work, since the webcam doesn'y assign a remote IP (it states 0.0.0.0).
No support infor on Creative web page at all, they don't even list the product. I feel like this is all a big scam....
Can anyone provide insight in how to the this product to work?

Did you get an auto response to your e-mail? Once a request arrives a response goes out automatically. If you didn't get that, check your spam filter first as the reply may be stuck there.
If for some reason you did not receive any response at all, please send me a PM with your contact details. I will have someone look into your issue.
Message Edited by KokChoy-CL on 06-12-2008 09:09 AM

Access() doesn't work correctly

Hi.
I'm porting existing C++ code on flascc and it seems that there is some problem with access() realization. It always returns 0 even if file doesn't exist at all. You can easily represent this issue on sample 07. Just add something like this at the beginning of main():
int result = access("rocks1.txt", R_OK);
cout << "Access result: " << result << endl;
File "rocks1.txt" doesn't exist but result is 0. Is this a bug or am I doing something wrong?
Thanks.

Were you running iOS 7 beta? If so, as a developer you need to log into the Developer forum for assistance.
Not a developer and running iOS 7 beta? Then you've stolen Apple's software and will receive absolutely no assistance from this forum. Enjoy your iBrick!

Remote file access doesn't work with Mac and Q10

I'm running the latest BlackBerry Link (version 1.20, build 7) and Mac OS X (version 10.9) software on my Mac Mini computer.
I setup BlackBerry Link for remote file access.
On my Q10 in File Manager I see my Mac computer but for some reason I don't see any folders. It's just a black blank screen. My carrier is Telus.
In link I chose folders to access. It seems like everything is setup properly and I still see only a black blank screen on my Q10.
Any Mac users have this issue?

Me too. None of the sync functions/remote file access/wifi sync using BB Link are working for me. I have a Mac (10.8.5) and a BB Z10 (10.2.0.429). I hope BB comes up with a solution soon.

Login to file access doesn't work

Strange one here... Netware 6.5.6
1. When server starts, all users can use all functions of VO
2. Sometime within a week, the VO will stop allowing external (outside of
the LAN, from the Internet) access to NetStorage. The user can login to the
VO, and they can see their name at the top-left pane, but they they are
presented w/ another login (the one w/ the check box to add to Secret
Store), which never allows a login. Strangely, LAN uses can login?!??!!!!
3. A reboot of the server "solves" this issue, but at some point we repeat
this eternal comedy / tragedy.....
Any ideas?
I'm ready to simply replace index.html w/ a flat HTML portal page.....
Tim Wohlford CNE

Tim,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Ajax database access doesn't work in IE

Hi guys,
I found this tutorial while looking for relevant code for my website. It's exactly what I need, but it does not work in IE (works in other browsers flawlessly).
Could anyone please advise of the solution to make IE happy?
tutorial web: http://www.quackit.com/ajax/ajax_tutorial.cfm
thanks,
Simon

It looks like you didn't define the VISITED state of the
link. And make sure
they're defined in the order: link, visited, hover, active to
make sure they
work properly.
MD
the9Ulaire wrote:
> Here is the link to the page I am working on:
>
> <a target=_blank class=ftalternatingbarlinklarge
> href="
http://www.lwrussell.com/Templates/first.dwt
>
> Everything">
http://www.lwrussell.com/Templates/first.dwt
>
> Everything</a> works perfectly in Firefox. Yet in
IE, the link's
> text acts like a regular link once "visited" , yet I am
using CSS to
> define it as it's own type. How can I fix this?

Web access doesn't work for AP1231

When I set up a username with privilege level 15 the web prompt just keeps blinking back at me. I can log on via telnet with no issues using the username and it puts me right into enable mode without the enable password. This problem happens with just about every autonomous WAP I set up. The web prompt says the username must have privilege level 15 but refuses to allow usernames with privilege level 15.
Any ideas?

I've attached the config. Looking at the Sun Java Console I think the version is 1.6.0_06.

First iWeb now Keychain Access doesn't work properly

I can't view passwords by clicking on Login.

Ewan ~ While you await a possible specific answer to your problem, this Apple doc may help:
Using keychains with MobileMe, troubleshooting keychain issues

Upon switching to Mountain Lion Wake for Network Access doesn't work

After switching to Mountain Lion, my Mac and MacBook computers are not visible in the finder as shared unless they are awake. They used to before. I have tried unchecking and rechecking "Wake from Sleep" in the Energy Saver Preferrence and restarting. No fix.

Please follow Linc Davis's advice to see if you have a Sleep Proxy server on your home network. For example, here is what the command shows on my home network:
dns-sd -B _sleep-proxy._udp local
Browsing for _sleep-proxy._udp.local
DATE: ---Sun 12 Apr 2015---
16:34:14.530 ...STARTING...
Timestamp     A/R    Flags if Domain        Service Type         Instance Name
16:34:14.531 Add        3   5 local.        _sleep-proxy._udp.   30-35-10-70.1 Pantry
16:34:14.531 Add        2   5 local.        _sleep-proxy._udp.   50-35-10-70.1 TV_Console
I have 2 Sleep Proxy servers active on my network (both are Apple Airport Extreme home WiFi Router base stations; the names Pantry and TV_Console are the management names I have given them).
If you DO NOT have a Sleep Proxy server, then you MUST use a special program to wake up a sleeping Mac. WakeOnLan is one such program.
<http://www.readpixel.com/wakeonlan/index.html>
The Sleep Proxy or WakeOnLan will send a specially composed network packet that the networking hardware listens for and will wake up the Mac when it is seen.
The Sleep Proxy server pretends to be your Mac while it is asleep, and if you attempt to connect to the Advertised service, the Sleep Proxy server will send that magic network packet to wake up the Mac, and forward the connection request to the new awake Mac.
<http://en.wikipedia.org/wiki/Bonjour_Sleep_Proxy>

The back button doesn't work for microsoft outlook

the back button for microsoft outlook web access doesn't work. other web pages are fine

To respond to your comments first of all, the Bookmarks toolbar has been removed in Firefox 4.0
The back button should work as it normally does, but you can also right click it and select it from the list.
To revert to a previous version of Firefox, download v3.6.16 from here: [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.16]
Then uninstall Mozilla Firefox 4.0 choosing to keep your bookmarks, customizations etc.
Finally run the Firefox installation file you downloaded earlier.

RD Web access SSO - remote desktop doesn't work

Hi,
This is my first post in here, and I hope you gays can help me out.
I am currently experiencing some issues with RD Web SSO not working as I would like it to work. I have found countless articles and guides describing how to get it to work, but no guide have yet helped me.
The problem is that when I log in on the web access and open a published application everything works fine I wait 5 sec and the application pups up, but when I try to open "Remote Desktop" then I get a new log in box where I must enter my log in credentials
again (after entering my credentials everything work great.)
The problems I am currently facing is produced in a demo environment configured as follows:
1x DC server (DC01) also the lic server
2x RDS server (RDS01/02)
1x RDS Connection broker (RDCM01) I have created a farm named "farm01.mydomain.com"
1x RDS Web access server (RDWA01)
1x RDS Gateway (RDSGW01)
(All the Servers are installed with Windows server 2008 (R2) SP1, and have the latest update.)
I am publishing my demo environment on the internet, i have created a domain name for my gateway and my web access and they are both accessible from the web (rdwa.mydomain.com and rdsgw.mydomaim,com). I also have secured everything with an SSL wildcard certificate
( my external and intern domain names are the same so I am using one SSl certificate) that is trusted on the web.
when I log in on the web access server trough (IE9 or IE8 ) from another network(wan) and I open a published application (calculator), it pop ups in just a few seconds. But when I try to open my Remote desktop I get a login box where I must enter my
username and password one more time.. after that remote desktop opens and everything works great.
My laptop is a Windows 7 professional with RDP 7 and IE 9, and is not member of a domain (just a workstation), I have tested it from multiple workstations and networks(Also win 7 and RDP7) but even there I have the same problem.
Thinks that I have tried tell now:
I have created a kerberos account as mentioned on
MSDN
I have checked my group permissions as mentioned
here
And many more blogs and forums
I have tried multiple settings on RDCM, RDWA, RDSGW and RDS server
Right now I am out of ideas, and I hope you gays can help me out..
thanks in advance,
Pouyan

Thnx for you advise,
Did you go into your RemoteApp Deployment settings and change the server name to the farm name "farm01.mydomain.com?"
Yes
Also in the Session Broker's RemoteApp and Desktop Connection Properties window change the Connection ID to the farm name as well.
actually I couldn't find out what to put on the connection ID so I had left it just default, but after changing it to the farm name it still doesn't work
Did you sign you apps with the cert used on your RDS servers?
yes, I am using a wildcard ssl certificate to sign all the servers/apps with.
there is
something that
strikes me, when I log on the web access and click on a published application (that is hosted from the same RDS servers) then I get a information box. when I click on the "details" button I see on the bottom "use the following credentials to connect" and my
domain and username are published there. But when I click on the "Remote desktop" icon and do the same I can't see this information!!
Also I don't think that its an SSL problem, because after log in again it works perfect without any warning.

My screensaver seems to be freezing and I can't access Safari. I've tried restarting/shutting down and that doesn't work. Any ideas to help?

My screensaver seems to be freezing and I can't access Safari. I've tried restarting/shutting down and that doesn't work. Any ideas to help?

Which OS X is installed on your Mac ?
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
Troubleshooting advice can depend on that information.

I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. What do I do?

I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. So when I want to download apps I have to sign in with apple id but I can't so I made a new one, However I can't seem to be able to delete the old one. What do I do?

You can't merge Apple IDs. You also can't cancel (delete) and existing ID, you can only choose to stop using it.
If your old ID was compromised and you can no longer access it, you'll have to contact Apple for assistance. Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then then 'Apple ID account Security’.

I cannot sync Ical on my iMac with my professional calendar (outlook web access). and I don't understand why it doesn't work since I have already made it with my iPhone. Help

Hello,
I bought an iMac few days ago. I would like to sync ical on my iMac with my professional calendar I use in my company (from outlook web access).
I was easy to manage it on my iPhone (I just add a new "exchange" mail account and ask for a calendar sync only) and it worked very quickly.
But I cannot do it with the iMac, and I don't undersatnd why?
the domain is is used for my iPhone is the following :
owa.companyname.com
I tried all the solutions I found in this forum but it doesn't work.
Many thanks in advancefor your help.
Matt

Does it have to be an applet?
If you want the same behaviour as in the code with traffic lights, change
class MortgageApplet extends JApplet implements ActionListener {
to
class MortgageApplet extends JFrame implements ActionListener {
and change
public void init() {
to
public MortgageApplet() {

Accessing Collaboration Room with Room Link (URL) doesn't work

hi all
i'm trying to access a collaboration room by room link (url) but it doesn't work. the room url is: https://www.sportal.ch:443/irj/index.html?NavigationTarget=CollaborationConnector://portal_content/com.sap.ip.collaboration/Rooms/b0ce78ec-3f30-2910-2184-b171271d4d95/workset&NavTargetAsRoot=true
i have checked the roombackend-properties => they are ok
i have checked the roles and permissions => they are ok
what me surprises: when i open a new browser window and type in the mentioned url, our portal-start-page is displayed but in the content area there is no content displaied. i expected, that when i type in the url, then the authentification-dialogue would appear, but it does not.... (does this url only work if i am already logged in the portal??)
if you have any ideas, how the problem could be solved, please let me know!
thank you for your help.
greetings
flo

hi ingo
thank you for the input. i have now solved the problem, perhaps my solution fits for you too. here it is:
when i use the function "send room-link" the url looks like this:
https://www.sportal.ch:443/irj/index.html?NavigationTarget=CollaborationConnector://portal_content/com.sap.ip.collaboration/Rooms/9020275c-8348-2810-28a6-a8c1ae60e192/workset&NavTargetAsRoot=true
with this url i can not access the collaboration room.
but when i change the url like this:
https://www.sportal.ch/irj/portal?NavigationTarget=ROLES://portal_content/com.sap.ip.collaboration/Rooms/9020275c-8348-2810-28a6-a8c1ae60e192/workset&NavTargetAsRoot=true
now i can access the room (with authentification).
OK, for me the main problem is solved, but can someone perhaps tell me whats the difference between:
NavigationTarget=CollaborationConnector
and
NavigationTarget=ROLES
thank you for your help!
greetings
flo

URI-Access doesn't work

Similar Messages

Maybe you are looking for