Urjent:Partition error:Logging out user [Admin], active for 0 minutes

Hi all,
Iam using 11
Wen iam creating Transaparent partition its validating successfully , but wen iam saving it its giving error , partition creation failed
Error: 1051037: Logging out user [Admin], active for 0 minutes
and it s giving error reading ddb file
i tried with maxl also but it continiously running for 30 mints , its horrible , actually it takes 2 mints
how can i resolve this issue, any help would be appriciated
thanks
Edited by: user8815661 on 26 avr. 2010 05:18
Edited by: user8815661 on 27 avr. 2010 04:00
Edited by: user8815661 on 3 mai 2010 04:18

Sounds like there is some sort of ddb file corruption. There are many causes, but the quickest fix I have found is usually a file-based deletion of the ddb file on both the source and target side of this partition. The attempt to create a partition on this database will cause a new ddb file to be created. Of course, this is dangerous. You can't have any other partitions on either the source or target side...or they will be deleted by this step. But the only purpose of the ddb file is for partition definitions, and it exists on both source and target.
I've found this happens if one side of a partition (one of the ddbs from source or target) gets the file deleted, or communication is down between the source database server and target database server.

Similar Messages

  • Adobe Flash Player 15.0.0.16 on Win 8.1 64bit ES logs out user at the end of Youtube film

    Dear Players.
    My Adobe Flash Player 15.0.0.167 on Win 8.1 64bit ES (Spanish) in IE11 logs out user at the end of Youtube film. In Event viewer there is apparently no error information. I use Fujitsu Siemens Lifebook S6410, where on Windows Vista 32 bit and IE9 with current Flash there was no problem on Youtube films.
    I have a feeling that initially after installing Windows 8 and 8.1 the films of Youtube finished correctly showing a mosaic of proposed next films. Now when the film ends, and the mosaic of the proposals should appear, the user is logged out.
    I did all the Adobe recommendations, and it does not help. Yet the problem is only with Youtube for the moment. All other Flash content on other pages shows ok.
    Any suggested solution?
    Kind regards
    Marcin Balcerzyk, Seville, Spain.

    Hello,
    Microsoft has been changing how they identify IE in the UserAgent string in IE11 (and in more recent versions of IE10). This has been occurring over various releases and it's not new to the latest updates.  As you see, sometimes they identify as Netscape/Mozilla instead of IE.  You can Google 'Microsoft User-agent string' the search will return various MSDN articles on this topic.  Long story short, most websites use OS/browser version in the user-agent string to display content for that particular combination, however, Microsoft wants content developers to use feature detection, not browser detection.  Compatibility view will work because Microsoft will change the user-agent string properties to something prior to the changes they've made.  By doing this, Microsoft leaves it up to the content developer to update their site.  Some have, some have not.
    Maria

  • I logged out of my FaceTime for a while then when I tryed to log back in it kept saying error accrued

    I logged out of my FaceTime for a while then when I tryed to log back in it kept saying error accrued it's not activating

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Logging out Users authenticated thru a Directory service froma web app

    I would like to know how to log out users authenticated thru a Glassfish web server to a Directory service can be logged out and their associated session ended on the web app. My application logs in users successfully but it been problematic logging them out. each time i use the Session.Invalidate method and i navigate backward with the browser button, a new session is created and the getPrincipalUser is still available to the page. I would appreciate contributions. thxs.

    it says address already in use.
    another process is using port 7101: java.net.BindException: Address already in use: JVM_Bind.> go to taks manager.. kill any java.exe process and try again.. it should work..

  • Log out users

    Hi,
    Il would like to log out users by Abap program.
    I find an function TH_DELETE_USER. But sometimes, it takes a long time to really log out, or more it does not work .....
    do you have another function to do this ?
    Thanks
    Vince

    Even if you want to do this in a BW you should post this in the ABAP section. But I did not find any other services that could help you on this topic. Maybe one of the ABAP/administration people in the ABAP forum can help you here.
    Best regards
       Dirk

  • My friend took my phone and tried to guess my password to unlock it, and he locked me out of my phone for a minute, but when it unlocked and i tried to use my phone all of my apps, photos, all my data had been deleted. how can i get them back?

    my friend took my phone and tried to guess my password to unlock it, and he locked me out of my phone for a minute, but when it unlocked and i tried to use my phone all of my apps, photos, all my data had been deleted. how can i get them back?

    As Ocean20 say, your only shot at recovering the photos and data is to restore from a backup (with iTunes if you took the backup with iTunes, through iCloud if you took the backup through iCloud).
    The erasure is to prevent your data from falling into the hands of somebody who takes your phone and eventually guesses your password. If you feel that the inconvenience caused by this feature and your friend outweighs the trouble that somebody could cause if they got possession of your contacts and other data, you can change this behaviour.
    Settings > General > Passcode Lock > Erase Data > OFF

  • MDT 2013 - Log out & Disable admin acct?

    How can I log out of Administrator acct and disable it at the end of Lite Touch Deployment?

    Add a step to disable the admin account with this command : net use administrator /active:no, and then add a restart computer. Good luck.
    Ryan
    edit^ net user administrator /active:no
    Thanks Ryan,

  • Error Log in UltraSearch Admin Schedule page

    Hi,
    I keep trying to find solutions to errors that we get in our log files but I can't seam to find any answers. Anyways, this is my problem and I was wondering if somebody out there would have an answer for me.
    I'm in the Admin site for the ultrasearch, and in the schedule status page, I get the following Error Log, and I don't know what to do to make the schedule crawl, crawl again.
    "Data source "Internet" has no applicable URL for crawling"
    Can anybody help me out.
    Thanks

    Can you post the entire text from the log file? This could help debug the issue.
    I am assuming you have a starting URL address for the Web crawler and it's not a permission issue.
    Also, make sure the Crawling Parameters look correct. Do the pages have dynamic URL's? If so, make sure the "Index Dynamic Page" option is set to Yes.

  • Terminal Command to Log Out User

    I have Fast User Switching enabled. I would like to log users out that forgot to log out. What are the Terminal commands to log out someone named Alice who is a Standard user in OS X.3.9? I'm getting tired of having to restart to shut down the users account. Will the commands be the same for an Administrators account?
    Thanks for your help,
    G4 Quicksilver Dual 1 GHz, 1.5 GB RAM, Sonnet ATA133 card, Maxtor ATA133 drives   Mac OS X (10.3.9)   B+W G3 450 MHz, OS 9.2.2, 1 GB RAM

    If you're the Admin, then you should be able to use Terminal as root to log someone out like this:
    sudo killall -u [username]
    This should kill all processes in that user account, and it may log them out also (I can't test this on a single user machine). If it doesn't, you can use:
    sudo shutdown now
    which will log out everyone and shutdown the system to single-user mode for the root/Admin user.
    Hope this helps,
    Mulder
    If my answer helped solve your problem, please consider awarding some points. Why Reward Points?
    iMac G4 700Mhz   Mac OS X (10.3.9)  

  • Essbase Maxl - Log out users

    Hello All,
    we have the following Maxl Script that is supposed to log out all users and prepare for the new load
    alter system logout session all;
    however the commande does seem to be working. If the user is already logded in it fails to log them out and terminate thier session.
    Any idea why is this happening? any suggestion on how to kill all session and logout all users

    Correction i meant
    : however the command does NOT seem to be working
    Hello All,
    we have the following Maxl Script that is supposed to log out all users and prepare for the new load
    alter system logout session all;
    however the command does NOT seem to be working. If the user is already logded in it fails to log them out and terminate thier session.
    Any idea why is this happening? any suggestion on how to kill all sessions and logout all users

  • Log out user after an inactive period

    I am using DW CS3 and a MySQL database.
    Is there any way I can automatically log out a user if they have been inactive for a period of time?
    The reason I am asking, is that I have been testing my latest site and even if I close all windows in a browser (not quitting the browser) and then go to history, I can still get to protected pages. This could maybe a potential problem if users never quit their browser, they could still be logged in after days of inactivity.
    This is about my 5th site I have created using ADDT. The more I use the more I find it capable of. But this has me stumped.
    Any help would be appreciated.
    PM

    Hi Paul,
    checking a user´s inactivity could mean checking if his/her session still runs of if it´s expired by now -- whenever you apply a "Restrict access to Page" behaviour to whatever page, this behaviour will not just check things like user levels etc, but also if the session is still running.
    As this behaviour also cares for a redirection to your login page, I think you should apply this to every page which needs this kind of protection.
    Cheers,
    Günter Schenk
    Adobe Community Expert, Dreamweaver

  • Logging out users

    We have set up individual users on our iMac, since I have installed Snow Leopard I find it does not go to the login screen when a user logs out, infact I have to manual shut down my Mac and restart it to get back in. It seems to hang up. any suggestions??

    We have also set up individual accounts on our iMac, with parental controls on some. Logging out takes over 1 minute, with transition to screensaver followed by a new login screen more than 1 minute later. Did not happen before upgrading to SL. Any suggestions other than reloading the OS?

  • Airtunes Stops, Mac Logs Out User

    When using Airtunes (over Airport Extreme to Airport Express then through stereo system), everything works great for 45 minutes or an hour, and then suddenly stops. When I go to the Mac to see what's happening, I've been logged out automatically.
    I would normally think that it's because the computer is set to go to sleep after X minutes of inactivity, except that (1) it's not really inactive as long as music is playing, and (2) any other time the computer goes to sleep due to inactivity, the user is not logged out.
    Is this in fact due to the sleep setting, or is something else going on? Thanks.

    When using Airtunes (over Airport Extreme to Airport Express then through stereo system), everything works great for 45 minutes or an hour, and then suddenly stops. When I go to the Mac to see what's happening, I've been logged out automatically.
    I would normally think that it's because the computer is set to go to sleep after X minutes of inactivity, except that (1) it's not really inactive as long as music is playing, and (2) any other time the computer goes to sleep due to inactivity, the user is not logged out.
    Is this in fact due to the sleep setting, or is something else going on? Thanks.

  • Not log out when in active

    My new Air with 10.8.2 likes to log my account out when it's inactive for a few hours, which didn't happen on with 10.7 or .6 or .5 on my older MacBook. I'm fine with locking the screen and having to password back in but I would like to turn off the log out feature. I've looked in Security & Screen Saver & Account pref panes, and so far I can't find a control for this.
    Can anyone tell me where to turn of the log out feature?
    Thanks

    Unlock the Security & Privacy pane of System Preferences and click the Advanced button.
    (74310)

  • Computer logs itself into Root account after logging out of admin account

    I am experiencing a problem with my laptop logging itself into the root account. I recently started having my computer log itself out of my account if I was inactive for several minutes as a security precaution. However, now I frequently return to find my computer logged out of my account, but logged into the root account. The normal login window that appears when you log out of an account appears over the desktop of the root account. Any ideas how I can stop my computer from logging in like this and making my computer even less secure than it was before?

    if you create another administrator account, dose it have the same issue as the managed account? if it dose not, dose any programs open when you login as the new administrator account?

Maybe you are looking for