URL-based Config Info

I am looking for a way to share run-time configuration information between
Forté and Java processes, possibly running on different boxes (Solaris).
Someone suggested we use an URL-based retrieval mechanism, or perhaps LDAP.
Does anyone have any pointers on how to access such info from a Forté
service object?
Thanks,
Mike Lapeyre
EDS / OnStar
mailto: mike.lapeyreOnStar.com

Hi,
The pageURL under the showPage needs to point to the final destination URL that you need to render. The loginURL under authentication needs to point to the login page where you will submit the user/passwd.
You can view a step-by-step demo on the PDK from:
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDKGENERAL/PDKHOME/PDKDEMOS2/DEMOSOURCE/PDKURL/FINANCEAUTHPORTLET/YAHOOFINANCEAUTHDEMO_VIEWLET.HTML
and other demos too from:
http://portalstudio.oracle.com/servlet/page?_pageid=350&_dad=ops&_schema=OPSTUDIO&9054_PDKHOME_39847486.p_subid=176584&9054_PDKHOME_39847486.p_sub_siteid=73&9054_PDKHOME_39847486.p_edit=0#PDKURLDEMO

Similar Messages

RE: (forte-users) URL-based Config Info

You can use xml over http to pass information between Forte and Java. You
can use httpdc/httpsupport(Forte3.5) library to send and receive using http
in Forte and use servlets in java.
ka
-----Original Message-----
From: Lapeyre, Michael [mailto:Mike.LapeyreONSTAR.com]
Sent: Tuesday, November 21, 2000 7:04 PM
To: 'forte-userslists.xpedior.com'
Subject: (forte-users) URL-based Config Info
I am looking for a way to share run-time configuration information between
Forté and Java processes, possibly running on different boxes (Solaris).
Someone suggested we use an URL-based retrieval mechanism, or perhaps LDAP.
Does anyone have any pointers on how to access such info from a Forté
service object?
Thanks,
Mike Lapeyre
EDS / OnStar
mailto: mike.lapeyreOnStar.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

You can use xml over http to pass information between Forte and Java. You
can use httpdc/httpsupport(Forte3.5) library to send and receive using http
in Forte and use servlets in java.
ka
-----Original Message-----
From: Lapeyre, Michael [mailto:Mike.LapeyreONSTAR.com]
Sent: Tuesday, November 21, 2000 7:04 PM
To: 'forte-userslists.xpedior.com'
Subject: (forte-users) URL-based Config Info
I am looking for a way to share run-time configuration information between
Forté and Java processes, possibly running on different boxes (Solaris).
Someone suggested we use an URL-based retrieval mechanism, or perhaps LDAP.
Does anyone have any pointers on how to access such info from a Forté
service object?
Thanks,
Mike Lapeyre
EDS / OnStar
mailto: mike.lapeyreOnStar.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

URL based portlet from external application

Hello,
I'm trying to integrate a forms 6i patch 10 application into SSO.
First, I created an external application, passing it the correct parameters.
Everything went ok, and I can successfully call it by entering
"Administer Enternal Application" link on Oracle Portal.
Now I want to make a portlet from this external application. For that I'm
using PDK URL Services. So I reused the urlexternalauth provider which is
included in the latest PDK. The provider.xml is included below. I successfully
registered the provider, by following the wizard "Register Portlet Provider" on
Oracle Portal. But when I call the portlet, the html startup file for the form
is base.htm. When I call the external application through the "Administer Enternal Application" link,
I get the right html startup file, which is basejini.htm.
So I need basejini.htm called from the portlet, and not base.htm.
Thanks,
Andri.
provider.xml
<?xml version="1.0" encoding="UTF-8"?>
<?providerDefinition version="3.1"?>
<provider class="oracle.portal.provider.v2.http.URLProviderDefinition">
     <providerInstanceClass>oracle.portal.provider.v2.http.URLProviderInstance</providerInstanceClass>
     <session>true</session>
     <authentication class="oracle.portal.provider.v2.security.Authentication">
          <authType>ExternalApp</authType>
          <userFieldName>username</userFieldName>
          <userPwdName>password</userPwdName>
          <errorPageMessages>Error Message!</errorPageMessages>
     </authentication>
     <proxyInfo class="oracle.portal.provider.v2.ProxyInformation">
          <httpProxyHost>proxy.br.odebrecht.com</httpProxyHost>
          <httpProxyPort>8080</httpProxyPort>
     </proxyInfo>
<portlet class="oracle.portal.provider.v2.http.URLPortletDefinition">
<id>1</id>
<name>iCorporate</name>
<title>iCorporate</title>
<description>iCorporate - aplicacao Forms6i</description>
<timeout>100</timeout>
<timeoutMessage>iCorporate time out</timeoutMessage>
<acceptContentType>text/html</acceptContentType>
<showEdit>false</showEdit>
<showEditToPublic>false</showEditToPublic>
<showEditDefault>false</showEditDefault>
<showPreview>false</showPreview>
<showDetails>false</showDetails>
<hasHelp>false</hasHelp>
<hasAbout>false</hasAbout>
<passAllUrlParams>true</passAllUrlParams>
<inputParameter class="oracle.portal.provider.v2.URLPortletParameter">
<name>config</name>
<displayName>config</displayName>
<value>icorp</value>
<isMandatory>true</isMandatory>
</inputParameter>
<inputParameter class="oracle.portal.provider.v2.URLPortletParameter">
<name>database</name>
<displayName>database</displayName>
<value>server1</value>
<isMandatory>true</isMandatory>
</inputParameter>
<renderer class="oracle.portal.provider.v2.render.RenderManager">
<showPage class="oracle.portal.provider.v2.render.http.URLRenderer">
<contentType>text/html</contentType>
<pageUrl>http://server1.rjo.br.odebrecht.com:7780/servlet/f60servlet</pageUrl>
</showPage>
</renderer>
<securityManager class="oracle.portal.provider.v2.security.URLSecurityManager">
<authorizType>public</authorizType>
</securityManager>
</portlet>
</provider>

Andrea,
Could you tell me if FORMS 6i authentication process is based on cookies? The reason being, URL based portlets SSO feature is primarily driven by External Application's cookies, which act as authentication tokens. Once a valid user information is submitted to the External Application, cookies (if any) are received and stored so that they can be re-used in further connections. A typical flow of events can be summarized as follows :
At provider level :
1. Connect to External Application.
2. Submit user information to url specified by External Application's login URL.
3. Fetch cookies
4. Store them for future use.
At portlet level :
1. Read cookies fetched through provider, pertaining to this portlet.
2. Open connection to url specified by <pageUrl> tag in provider.xml
3. Read content and display in the portlet.
From the provider.xml, I can see that we are trying to show content given by http://venezuela.rjo.br.odebrecht.com:7780/servlet/f60servlet servlet, which has two parameters called {config and database}. This makes the resulting URL as http://venezuela.rjo.br.odebrecht.com:7780/servlet/f60servlet?config=icorp&database=venezula. I guess when this URL is accessed directly, FORMS servlet will redirect the user to base.htm file. Important point to note here is that when URL based portlet makes connection to the above URL, user information is not directly sent along with the request. Instead, cookies fetched from External Application, if any, are sent. But when the same application is viewed through portal's External Application, user information is directly submitted to the login URL. So, before deciding on something, it is important to know how different is the loginURL specified through portal's External Application details, from <pageUrl> of URL based portlets?
-aMJAD.

How to get SSO userid to URL-based app?

I'm developing a web-app using Struts that will be accessed by Portal (I guess as a URL-based app). The web-app will not require login. The web-app will not be Portal "aware", except that it requires the SSO userid for auditing/logging purposes.
I know little about Portal and SSO. How can Portal be configured to send the Portal userid of the logged-in Portal user? Can it send it as a parameter in a GET or POST?
The version of Portal will be 9.0.2 (or greater).

This topic is answered in the PDK forum here:
How to get SSO userid to URL-based app?

Any solutions for URL based routing

Hi,
I have an ASA 5505 that has 2 route (1 route connecting to MPLS VPN to HK branch office and 1 route connecting to Internet service provider). As you know, ISP in China blocking many web sites (such as facebook, youtube or etc.). So , I would like to route the traffic when the user in China office would like to browse facebook.com or youtube.com to HK ASA and egress to the internet by NAT. However, all other traffic remain to route to ISP in China, so that the Internet traffic in HK office will not be overload and the user in China can browse facebook.com or youtube.com.
I have researched a topic of regular expression with Modular Policy Framework (MPF). I expected that if the ASA can match the traffic, I can set next hop to HK office's ASA. However, this feature does not support https so that my expectation failed. Because the login page and sometime these web site using https for encryption. I hope URL based routing work on both http and https can work.
Do anyone have any solutions to resolve this situation? Please kindly provide it to me. I would appreiciate it if you could also provide configuration example with commands. I look forward to hearing from anyone soon. Thank you.
Regards,
Lapson Wong

What you are trying to do is policy-based routing which is not supported on the ASA. MPF is used only for inspection and QoS type serverices.
If using a proxy is not an option, you would need to put in a router that would send the desired traffic over the WAN network. another option, though I would not recommend it, is to find all the IPs of facebook, youtube, etc. and add static routes on the ASA pointing out the WAN interface.

How to build URL-based Portal for iAS 902

Does V2 PDK support URL-based portlet? Can anyone provide a sample provider.xml?
Thanks,
-Jin

Aftter subscription, I could view the doc for V2. I modified my provider.xml accordingly as follows:
<?xml version = '1.0' encoding = 'UTF-8' standalone = 'yes'?>
<?providerDefinition version="3.1"?>
<!DOCTYPE provider [
<!ENTITY virtualRoot "/jpdk/">
<!ENTITY physicalRoot "E:\9iAS\Apache\Apache\htdocs\jpdk\">
]>
<provider class="oracle.portal.provider.v2.http.URLProviderDefinition">
<providerInstanceClass>oracle.portal.provider.v2.http.URLProviderInstance</providerInstanceClass>
<session>true</session>
<useOldStyleHeaders>false</useOldStyleHeaders>
<portlet class="oracle.portal.provider.v2.DefaultPortletDefinition">
<id>7</id>
<name>jimmy2</name>
<title>jimmy2</title>
<descriptionKey>jimmy2</descriptionKey>
<timeout>1000</timeout>
<timeoutMessage>Timed out</timeoutMessage>
<showEdit>false</showEdit>
<showEditDefault>false</showEditDefault>
<showPreview>false</showPreview>
<showDetails>false</showDetails>
<hasHelp>false</hasHelp>
<hasAbout>false</hasAbout>
<acceptContentType>text/html</acceptContentType>
<renderer class="oracle.portal.provider.v2.render.RenderManager">
<renderContainer>true</renderContainer>
<contentType>text/html</contentType>
<showPage class="oracle.portal.provider.v2.render.http.URLRenderer">
<pageUrl>http://www.google.com</pageUrl>
</showPage>
</renderer>
</portlet>
</provider>
I didn't get any error registering the provider and adding the portlet. But when portlet was rendered, I got error:
Error: The listener returned the following Message: 500 Internal Server Error
Any ideas?
Thanks,
-Jin

Bad system config info

Hello,
OS WIN 8.1
HP Pavillion
I got this message Bad system config info on a blue screen. I can't boot up the OS, even tried safe mode and nothing works. Tried Refresh and nothing.
I need to access my documents and using HP recovery manager with flash usb stick, trying to copy the documents i need to save, but at times it tells me No USb is connected.
There is a problem I just can't get, I tried so many things, Extensive Stress test, passed. Chkdsk /r, no problem. It tells me the computer is locked, or Antivirus is running....Can anyone pls help/
\TKS
Desperate to fix this

When trying to back up files I assume you aren't attempting backing up to same flash drive that contains HP Recovery?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Passing a Parameter to URL based Iview BW report

Hi,
Can anyone let me know how to Pass a Parameter to a URL based Iview BW report.
The URL is as follows: I have the Variable Name as VAR_CISNUMBER and the Value for it should be Populated as 100020.
http://cnqdc01605.bsp.corp.net:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=CR_QUER1&VARIABLE_SCREEN=X&DUMMY=2
Immidialte help will be Very much appreciated. Lots of Post are there related to this but none of them is solving my issue. If any one can use the same URL provided above and give me Proper URL which will fetch me correct record.
Regards
Vishwanath
Message was edited by:
Vishwanath Srinivasan

Hi Vishwanath,
this URL should work:
http://cnqdc01605.bsp.corp.net:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=CR_QUER1&BI_COMMAND_1-BI_COMMAND_TYPE=SET_VARIABLES_STATE&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=VAR_CISNUMBER&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING=100020
Regards,
Nils

Problem weblogic 9.2 with quartz and log4j : url-template-config.xml

Hello,
I configure a Servlet Quartz to run when WebLogic 9.2 starts, but i have an exception, here is my log :
2009-04-15 11:52:52,424 ERROR Logger.error(): Exception while loading URL templates, /WEB-INF/url-template-config.xml
Throwable: javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismatch expected "" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
Stack Trace:
javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismatch expected "" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
     at org.apache.beehive.netui.core.urltemplates.URLTemplatesFactory.getTemplates(URLTemplatesFactory.java:131)
     at org.apache.beehive.netui.core.urltemplates.URLTemplateDescriptor.load(URLTemplateDescriptor.java:133)
     at org.apache.beehive.netui.pageflow.PageFlowContextListener.performInitializations(PageFlowContextListener.java:102)
     at org.apache.beehive.netui.pageflow.PageFlowActionServlet.init(PageFlowActionServlet.java:120)
     at com.bea.console.internal.ConsoleActionServlet.init(ConsoleActionServlet.java:185)
     at javax.servlet.GenericServlet.init(GenericServlet.java:256)
     at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:94)
     at weblogic.servlet.AsyncInitServlet.init(AsyncInitServlet.java:78)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:276)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:68)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:493)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1688)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1665)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1585)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2678)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:874)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:326)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:114)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:25)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:640)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:252)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:176)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:347)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.activate(DeploymentAdapter.java:50)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:232)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:168)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
Caused by: org.apache.xmlbeans.XmlException: error: The document is not a url-template-config: document element namespace mismatch expected "" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
     at org.apache.xmlbeans.impl.store.Locale.verifyDocumentType(Locale.java:449)
     at org.apache.xmlbeans.impl.store.Locale.autoTypeDocument(Locale.java:354)
     at org.apache.xmlbeans.impl.store.Locale.parseToXmlObject(Locale.java:1270)
     at org.apache.xmlbeans.impl.store.Locale.parseToXmlObject(Locale.java:1254)
     at org.apache.xmlbeans.impl.schema.SchemaTypeLoaderBase.parse(SchemaTypeLoaderBase.java:345)
     at org.apache.beehive.netui.core.urltemplates.schema.UrlTemplateConfigDocument$Factory.parse(Unknown Source)
     at org.apache.beehive.netui.core.urltemplates.DefaultURLTemplateFileParser.parse(DefaultURLTemplateFileParser.java:34)
     at org.apache.beehive.netui.core.urltemplates.URLTemplatesFactory.getTemplates(URLTemplatesFactory.java:118)
     ... 43 more
The problem may be a conflict with the different version. My versions are quartz-1.6.0.jar, log4j-1.2.15.jar.
When i rename the file url-template-config.xml i don't have this exception but just a log4j Warning but i don't know if it's not dangerous for my application (run with WebLogic 9.2) if i rename this file.
Can you give me a solution to remove this exception or tell me if rename this file it's not dangerous ?
Thank you,
MH.

url-template-config.xml is part of Apache Beehive. This file is used to provide a template mechanism for URL's. Is your application using Apache Beehive purposefully?
http://beehive.apache.org/docs/1.0.2/netui/apidocs/javadoc/org/apache/beehive/netui/core/urls/URLRewriterService.html
If not, you may have inadvertently added a reference to Apache Beehive when you created the application and now there are references to the Apache Beehive shared libraries in either weblogic-applicaiton.xml or weblogic.xml

Launch url based on variable

ok, this seems like it should be easy but im having problems,
using Flash CS3 and AS 2.
i have a variable named county, and variable named printUrl.
when you push a county button it shows "the County" in the
county field. what i want to do is have a button to load the url
based on the county in a new window.
frame one i have: printUrl = "mi/" +county+".html" ;
on the button i have : getURL(printUrl, "_blank", "");
it doesnt work, any help?
zodoria

ok, this seems like it should be easy but im having problems,
using Flash CS3 and AS 2.
i have a variable named county, and variable named printUrl.
when you push a county button it shows "the County" in the
county field. what i want to do is have a button to load the url
based on the county in a new window.
frame one i have: printUrl = "mi/" +county+".html" ;
on the button i have : getURL(printUrl, "_blank", "");
it doesnt work, any help?
zodoria

URL Based Transaction Launcher not loading

Hi All,
There is a URL based transaction launcher configured to display a crm opportunity report.
All the settings seem to be fine.
The configuration is done correctly in the wizard.
The URL is defined in view CRMV_IC_LTX_URL.
The logical link and Traget are also specified correctly.
the z handler class also gets called , but still the URL is not loading.
There is no error, but just a blank screen.
the system is CRM 5.2
could it be any browser issues or issue with BW system or any other issue ?
Could you please help me in finding the problem ?
thank you somuch,
regards,
Pushpa

Hello,
If you are watching this thread, I have a typical requiremnt like yours.
After creating the ITS URL id , I do not want to put this on the Navigation Bar.
But this lTS URL i want it as a link on one of the actiivty page. And also i should be able to pass parameter.
Please sugget what and how to achieve this.
Thanks,
Jaya.

Dynamically passing text and url-based images as an input parameter to cf8 report builder

I'm unsuccessfully trying to dynamically pass text and url-based images to a group footer or the detail section via an input parameter or even hardcoded. The field has the attribute 'XHTML Text Formating' set to True. The following are failed samples of a simplified value:
"<img height=’300’ alt=’Document’ width=’300’ src=’http://www.google.com/intl/en_ALL/images/logo.gif’ />"
or
"<img src=’http://www.google.com/intl/en_ALL/images/logo.gif’ />"
This just results in the above text being output. The end result would have various text and images from a database as input by a user, thus the reason I cannot just use the hyperlink information attribute as I could if it were a single known image. I tried rtf and pdf report types. Ideas?

HTH,
Thanks. I'll keep that in mind, although I don't know how many images my user might need or what sizes so that might be tricky.
Since my target output is rtf so that MS Word can be used to edit the result, I added a pagebreak to a MS Word doc and used the resulting html source to replace the rich text editor source code for the page break, but that did not help either. The page break was so a user could add an image later. Something is wrong with the Report Builder related to intepreting XHTML, especially anything that has an attribute, including URL-based image links. I hope they try to provide another update before CF9. I doubt my client will be going to CF9 for some time, since they are just completing the migration to CF8.
BrianO

Url-template-config Error Deploying app in WLS9.1

I am trying to deploy my application in WLS9.1 and using jdk1.5.0_08. I am getting url-template-config error. There is this file "url-template-config.xml"at
\weblogic91\server\lib\consoleapp\webapp\WEB-INF which is where this error arises and inside that file the schema definition is:
<url-template-config
xmlns="http://www.bea.com/servers/weblogic/url-template-config/8.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/servers/weblogic/url-template-config/8.0 url-template-config.xsd">
Why is weblogic 9.1 using a 8.0 defined template and is this the main problem? Please do help me out.
-Thanks

Hi
Did you get solution for url-template-config issue with weblogic 9.1 . Iam also getting the same error
15:23:22,531 [[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR URLTemplateDescriptor:152
- Exception while loading URL templates, /WEB-INF/url-template-config.xml
Throwable: javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismat
ch expected "" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
Stack Trace:
javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismatch expected
"" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
at org.apache.beehive.netui.core.urltemplates.URLTemplatesFactory.getTemplates(URLTemplatesFactory.java:131)
at org.apache.beehive.netui.core.urltemplates.URLTemplateDescriptor.load(URLTemplateDescriptor.java:133)
at org.apache.beehive.netui.pageflow.PageFlowContextListener.performInitializations(PageFlowContextListener.java:102)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.init(PageFlowActionServlet.java:120)
at com.bea.console.internal.ConsoleActionServlet.init(ConsoleActionServlet.java:185)
at javax.servlet.GenericServlet.init(GenericServlet.java:256)
at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:94)
at weblogic.servlet.internal.WebAppServletContext$AsyncInitRequest.run(WebAppServletContext.java:1641)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
Please let me knwo
Thanks
Binu

How do I launch a URL based on a drop down selection?

I would like to launch a webpage based on an item selection from the user. Scenario: User selects a brand of shoes from a dropdown menu. A webpage is opened for that brand of shoes. I will have the dropdown list link
to a table containing shoe brands and urls. I haven't found a way to script the launching of the url based on the user's selection. Thank you for your help.

Hello,
I made you a little outline Siena App you can download on
https://skydrive.live.com/redir?resid=FF0485C313407260%215627 (source included)
Based on a dropdown, it filters a gallery with a "go there" button. That should allow you to get some small description, image or data before leaving your app for the site.
Please let me know if you can't download it. I assume that this is what you are looking for.
Regards
StonyArc

URL based Iview creation problem

Hello,
We use EP6 SP9.
I am trying to build a url based iview with "capture" option.
When I enter the url address and hit "capture" I get the following error:
Unable to fetch site http://portal.Error # 401
Thanks for any help

Hi Tuval,
Yes I remember you from the Toptier days, hope life is treating you well.
Actually the Proxy settings could still be a problem for internal urls if infact you still have a proxy on your network. You would need to specify the bypass proxy domain settings in the http service just like you do in your browser. Except you use | as a delimeter eg. .sap.com|.sap.corp.
As I suggested you should still check that server side urls are working either internally or externally by typing a url into the 'server side connection test' in the Theme integrity tests page.
If this test passes and you cannot capture then its a capture problem either domain related or something else eg a timeout.
If this test fails then the capture will not work until server side requests can succeed.
Also, the capture service has some parameters as well but I have never changed the defaults.

URL-based Config Info

Similar Messages

Maybe you are looking for