URL blocking doesn't work on E4200

I have the 1.0.03 firmware installed and URL blocking doesn't work. I assigned the policy to the entire address range and could still access the web site I wanted to block.

What website? https or http?
You can't block https...

Similar Messages

I seem to have multiple problems related or unrelated. I cannot use Apple Mail for blueyonder and mostly for gmail as both show that the server is off line. My pop up blocker doesn't work and I am blitzed with pop up windows on nearly every command

Firstly I am unable to use Apple mail except for hotmail, for blueyonder, gmail or Sky as the server shows as (off line) and I have no idea how to get them on line even though I tell them to go there.
My pop up blocker doesn't work and I am blitzed with advertising windows virtually on ever command I make, one seems to be impossible to unsubscribe from.
When I am in an email with a web link the web link doesn't work and I get a window saying that I must have a pop up blocker, but if I switch it off it is no different, what does work is switching the "enable Java script off", then when I get to the web site I can't use it until I switch the java script back on.
I can't do a screen shot either full or partial, when I try it changes the web site that is on screen to another.
So what have I done that might have caused problems, downloading Yosemite seemed to be the start of the problems. Since then I have started to install Mackeeper, after checking with a family members who should know, that MacPaw is safe. I decided that I didn't want to pay the subscription, so went through the uninstall instructions but it comes up as a pop up with considerable regularity.
My stress levels have gone through the roof with pop ups happening so regularly and not being able to use Apple mail.o can anyone help please?
S

Mail troubleshooting - Yosemite
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline

Safari copy url button doesn't work

I just upgraded from an ipad2 to an iPad air 2. Before, if I wanted to copy and paste a url I'd use the copy button. Now,on the new iPad air 2, the copy button just wipes out whatever I've previously copied, and doesn't copy the url.

You tap and hold down in the URL field until you get the option to select all. Then you choose the option to select all. An option to Copy appears and you select that and then you should be able to paste that URL into a text field.
Safari copy url button doesn't work
I Realize that you must know the steps but I am just double checking. If that is not working for you, and you are not having copy and paste issues elsewhere in other apps, I would try clearing Safari, force close it and then reset your iPad.
Go to Settings>Safari>Clear History and Website Data
Now force close Safari. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Filter Web Template with URL Cmd: doesn't work with compound infoobject ?

Hello all,
I've to filter the query contained on a web template with URL command, but it doesn't work.
The web template contains only one query, and on the free chars I have 0PLANT.
I call the web template adding to the normal url the following command:
&FILTER_IOBJNM=0PLANT&FILTER_VALUE=33
where 33 is the code of the plant I want to filter.
The command is executed, I think, because the result is "NO APPLICABLE DATA FOUND". The fact is that when I execute this query on the Bex filtering 0PLANT by value 33 the data exists.
May be because 0PLANT on our system is in compound with 0SOURSYSTEM ? In this case, what's the value I can use as filter ?
Thank's in advance,
Max

Hi,
please see http://help.sap.com/saphelp_nw04/helpdata/en/59/edfe395dd76846e10000000a114084/frameset.htm
especially:
If the variant with ending 'EXT' is selected, the fully compounded value has to be entered in the external format, for example, 24.12.2000.
If the ending 'EXT' is not used, the fully compounded value has to be entered in the internal format, for example, 20001224 for 24.12.2000.
and
In the internal display (see table below) you can easily determine the name of the characteristic and the filter value using the URL parameter &snippet_operations=%20 (see also Object Tag for the Properties of Web Templates). Call the Web application with this URL parameter. If you filter using the context menu, the parameters FILTER_IOBJNM and FILTER_VALUE are automatically added to the URL in the Web browser. You can then use the desired values with Command URLs in hyperlinks.
Heike

ExecuteWithParams with URL parameter doesn't work

Hi!
There are a lot of posts about executing VO with parameters, but I'm still stuck on it. I have a VO with WHERE condition like this:
WHERE TABLE.ID = :IdParm
I want this binded variable to get populated in jspx page by parameter in URL. I've created a binding for ExecuteWithParams in my pageDef like this:
<action IterBinding="MyViewGIterator" id="ExecuteWithParams"
InstanceName="AppModuleDataControl.MyViewG"
DataControl="AppModuleDataControl" RequiresUpdateModel="true"
Action="95">
<NamedData NDName="IdParm" NDValue="${param.IdParm}"
NDType="java.lang.String"/>
</action>
and an executable on this:
<invokeAction Binds="ExecuteWithParams" id="callExecuteWithParams"
Refresh="ifNeeded"/>
so the executables in my pageDef look like this:
<executables>
<iterator id="MyViewGIterator" RangeSize="10"
Binds="MyViewG" DataControl="AppModuleDataControl"/>
<variableIterator id="variables">
<variable Name="parameterURL" Type="String"
DefaultValue="${param.IdParm}"/>
</variableIterator>
<invokeAction Binds="ExecuteWithParams" id="callExecuteWithParams"
Refresh="ifNeeded"/>
</executables>
I have a variableIterator that is binded on outputText control on my jspx just to test if parameter gets read correctly and it does.
What am I doing wrong that query doesn't execute correctly and I don't have any data on my page? I've also tried with refresh condition "Always" but it doesn't help.
Any help would be much appreciated.
BB
Message was edited by:
Brokenbone

Hi,
do the following:
- In the pageDef file (Executable section), create a "Parameter". The name of this parameter is up to you.
- the value of this parameter point to #{param.IdParm}
- In the ExecuteWithParam OperationBinding, select the agument item and select the NDVaue. Open the ExpressionLanguage editor and select the Parameter you just created
Here's a working pageDef file example:
<pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel"
                version="10.1.3.41.57" id="RequestParamTestPageDef"
                Package="adf.testcases.view.pageDefs">
<parameters>
    <parameter id="param1" value="#{param.param1}"/>
</parameters>
<executables>
    <iterator id="DepartmentsVOWithBindVar1Iterator" RangeSize="10"
              Binds="DepartmentsVOWithBindVar1"
              DataControl="AppModuleDataControl"/>
    <invokeAction id="executeDepartments" Binds="ExecuteWithParams"/>
</executables>
<bindings>
    <table id="DepartmentsVOWithBindVar1"
           IterBinding="DepartmentsVOWithBindVar1Iterator">
      <AttrNames>
        <Item Value="DepartmentId"/>
        <Item Value="DepartmentName"/>
        <Item Value="ManagerId"/>
        <Item Value="LocationId"/>
      </AttrNames>
    </table>
    <action IterBinding="DepartmentsVOWithBindVar1Iterator"
            id="ExecuteWithParams"
            InstanceName="AppModuleDataControl.DepartmentsVOWithBindVar1"
            DataControl="AppModuleDataControl" RequiresUpdateModel="true"
            Action="95">
      <NamedData NDName="deptId" NDValue="${bindings.param1}"
                 NDType="oracle.jbo.domain.Number"/>
    </action>
</bindings>
</pageDefinition>Frank

CUSTOM ROW FETCH USING PLSQL BLOCK DOESN'T WORK

Hello,
I'm using Apex 3.0, and I'm trying to use a anonymous block to populate page items instead of automatic row fetch. Apparently the block works fine but the page doesn't display the items with the values that I fetched.
I'm using something like:
Declare
v_test varchar2(10);
begin
select name into v_test from emp where emp_no=:p10_id;
:p10_name:=v_test;
end;
Does anyone have a clue ? The process is defined to run on "OnLoad - After header", but I've tried other options, but the results are the same: P10_name appears blank.
thank you for your help
JAV

But there is a catch.....on the item definition, the "SOURCE USED" must be set to "Only when current value in session is null", otherwise, it doesn't show what you want.
Cheers
JAV

Call blocking doesn't work

      I keep getting phone calls from {edited for privacy} the caller ID says Washington. They claim to be a pharmacy trying to sell Viagra and pain medications. I get between 2 to 4 calls per day and told them on numerous times.
      I added the number to my digital call blocking account and the calls still come thru. I contacted Verizon support and their answer was that the call blocking feature doesn't block long distance calls!!!! What kind of B.S. answer is that???
      If Verizon is going to offer a service than it should work, regardless if the call is local or long distance. If it'll only work for local calls than these digital FIOS features are WORTHLESS,,

Did you place your number on the Federal Do Not Call list?   If so, file a case and make some money off them.    If not, what are you waiting for?    You did not state if the incoming number was actually a domestic phone number or from an area code / country code outside of the United States.
Additionally, next time they call, note the exact day and time, ask for the call back number, company name,the operator's name or identification number, and then very specifically state "I do not wish to receive these calls from your company. Place me immediately on your DO NOT CALL list and do not call again. Future calls will be referred to the appropriate authorities for legal action.   Do you understand and acknowledge receipt of this directive?"
After that, keep good records and file a complaint as appropriate.

Url variable doesn't work in IE

Hey guys, my page, www.powerhouse.com/Products/Inventory.php I have a bunch of links that reload the page with a url variable. If FF 3, this works fine, yet in IE 8 the page does not load. My error log has the following error:
script '/var/www/powerhouse/public_html/Products/inventory.php' not found or unable to stat
what stupid IE Hack do I need to get this to work?

PHE Admin wrote:
My error log has the following error:
script '/var/www/powerhouse/public_html/Products/inventory.php' not found or unable to stat
what stupid IE Hack do I need to get this to work?
You don't need any IE hack. I have just tested the page in both FF and IE8. It works just fine in both.
However, it's very noticeable from your error log that it refers to inventory.php (all lowercase), whereas the actual page is Inventory.php (initial cap). The other thing that's noticeable is the path, which indicates your server is running on Linux, which is case-sensitive.
From this, I conclude that you originally coded the page using inventory.php, and later updated it. This suggests that IE8 is probably still using a cached version. Clear your cache, and the problem will probably go away.

URL request doesn't work outside of Flash Pro [CS6]

I've been working on a XML project in class using Hellcat, and everything seemed to be working properly, untill I used the html test in google chrome. None of the links would work, nor would it show an error. I thought "hey this is beta software, so it might be an error." and re-did the project in CS6. The exact same issue occured. I decided to test it in another browser. I opened it in Nightly (Firefox) and instead it blocked access to the link. I can't change the setting to allow it either (didn't show in the settings); so I don't know if it works there.
Here's my AS3 code:
var navURL2 = "http://" + (myXML.LINK[1]);
nav2.addEventListener(MouseEvent.CLICK, onClick2);
bg2.addEventListener(MouseEvent.CLICK, onClick2);
function onClick2(e:MouseEvent):void{
navigateToURL(new URLRequest(navURL2), "_blank");
and the XML: (I cut out the parts that aren't needed)
<LINK TITLE="">www.google.com</LINK>
What it's supposed to do:
It allows low-end users create a simple nav bar by editing elements in XML, and changing a link. You can change everything from the link, to the background of the swf.

I actually found the issue. Something was going on with my computer and wasn't allowing the links to be used on local host. But when I tested it on one of my websites, it ran find, then I had to add some exceptions and it started working corretly, thanks for the answer though.

URL button doesn't work after export into ppt/word/pdf

Hi,
I am working in Xcelsius.
Lets say I have placed a URL button in the Canvas and mapped that to a path of the file(which is not actualy an URL),but any path of the file which is present in the local system
After exporting this dashboard into ppt(or word/pdf),when i click the button,its not redirecting me to a target.
But during Preview of dashboard,it works fine.But after exporting,the URL button not redirects me to the path specified.
Rgds,
Murali

Hi
U got any solution for the above problem?
Thanks
Kothai

URL Cloaking doesn't work with Safari - IE & Firefox work fine

Hi There,
just wondering if anyone else has had this problem.
If I choose "URL Cloaking" from the domain options on my ISP's site, Safari cannot find my site, or links on the site quite often will not work.
IE on a PC and Firefox on both platforms work fine.
Does anyone have any suggestions? My Site URL is: www.svelte.net.nz
Any help would be much appreciated as cloaking hides the .Mac address which is kind of useful.
Cheers
Ben

HI There Tom,
I turned URL cloaking off so hadn't come back to the forum to see your reply - sorry for this. But now I need to have cloaking back on.
I'm not an HTML coder so don't know what I'm looking for. I might send this in to Apple and see If I get a response. Anyway, here is the code in case you or someone else knows if the ISP has got something wrong.
Any help would be much appreciated.
Cheers
Ben
<html>
<frameset rows="*" cols="*" >
<frame name="topFrame" scrolling="auto" src="http://web.mac.com/ben.sciascia/" frameborder="NO" marginwidth="0" noresize marginheight="0">
</frameset>
</html>

URL.openstream doesn't work

Hi,
I run the demo program form java tutorial. Code as below:
import java.net.*;
import java.io.*;
public class urltest {
public static void main(String[] args) throws Exception {
     URL yahoo = new URL("http://www.yahoo.com/");
     BufferedReader in = new BufferedReader(
                    new InputStreamReader(
                    yahoo.openStream()));
     String inputLine;
     while ((inputLine = in.readLine()) != null)
     System.out.println(inputLine);
     in.close();
but it gives the follow output
Exception in thread "main" java.net.NoRouteToHostException: Operation timed out:
no further information
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Unknown Source)
at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at sun.net.NetworkClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.New(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown So
urce)
at java.net.URL.openStream(Unknown Source)
at urltest.main(urltest.java:30)
Plz advise.

Thx Jean, I modify the OS to Windows 95, but the program still don't work
code:
import java.net.*;
import java.io.*;
public class urltest {
public static void main(String[] args) throws Exception {
     URL yahoo = new URL("http://www.yahoo.com/");
     HttpURLConnection uc = (HttpURLConnection)yahoo.openConnection();
uc.setRequestProperty("User-Agent","Mozilla/4.0 (compatible; MSIE 5.5; Windows 95)");
uc.setRequestProperty("Connection","Keep-Alive");
uc.setDoOutput(true);
uc.setDoInput(true);
uc.setUseCaches(false);
uc.setRequestMethod("GET");
uc.setFollowRedirects(false);
uc.setInstanceFollowRedirects(false);
     BufferedReader in = new BufferedReader(
                    new InputStreamReader(
                    uc.getInputStream()));
     String inputLine=in.readLine();
     //while ((inputLine = in.readLine()) != null)
     System.out.println(inputLine);
     in.close();
The output is
Exception in thread "main" java.net.NoRouteToHostException: Operation timed out:
no further information
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Unknown Source)
at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at sun.net.NetworkClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.New(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown So
urce)
at urltest.main(urltest.java:39)
Plz advise

Web.SHOW_DOCUMENT('URL', '_blank') doesn't work for Internet Explorer 7

Hello,
In my company, we are using Oracle Forms 10.1.2.0.2.
After inserting a URL, users are logged in. There is one page in the application that uses a button to open a PDF in a new page.
Code behind this button:
web.SHOW_DOCUMENT('URL', '_blank');
For internet explorer 6, there is no problem, but last week, some users have upgraded their browser to Internet Explorer 7. When they now push the PDF button, nothing happens. No error is given.
Could someone please help me..

Actually, I think a couple of my colleagues have seen this with IE7 recently... It seemed to be related to individual PCs rather than anything in our software, and was sort-of sporadic. I think on one of the PCs, there'd been an update to the Google toolbar and that had caused problems (and of course, if you have Google toolbar, that has its own popup blocker that you need to disable for the site in question.)
Sorry to be vague, but I would look for any other browser plug-ins on the machine that might be causing issues.
James

Why my scroll bar of a data block doesn't work?

Hi,
I have a data block that displays a maximum of 9 records at one time. When the query returns more than 9 records i want to use a vertical scroll bar to navigate to the last records.
In some forms it works fine but in others not , i still didn't find why ??
Cheers,
Nuno

Nuno,
Rather than trying to find a needle in a hay stack, I would recommend taking a step backward. This will help to rule out whether the issue is something you caused or if there is an issue with the environment or product.
Create a new module in the Builder. Do not add any of your own code.
In the Builder, connect to a database (File > Connect).
From the Builder menu, select Tools > Data Block Wizard
In the Wizard first screen (after Welcome), select Table or View then click Next
On the next screen, click on Browse to display the tables available to you. Choose one.
All the columns in that table should appear on the left. Click on the double arrow (>>) to select all of them. Then click on Next
Click on Next again
Choose the option to create the data block then open the Layout Wizard. Then click Finish
In the Layout Wizard, click on Next (after the Welcome scree) to choose the default Canvas. Then click on Next
Click on the double arrow (>>) to choose all columns. Then click Next
Click Next again.
Choose Tabular as the layout style. Click on Next
Change Records Displayed to 4 and check the box labeled "Display scroll bar".
Click on Finish
Again, do not make any changes to anything in this form. Run it. Does it reproduce the same problem you experience in your previous form? If this form works correctly, likely the issue is in the design of your other form. If this test form fails in the same manner then you are either exposing a defect or there is an odd configuration issue.

Pop up blocker doesn't work

Since upgrading to 10.7 the safari pop-up blocker no longer blocks pop ups!
I've run software update regularly and obviously checked that pop-up blocker is checked in the security preferences.
What is wrong?
The most common pop up is googleads.g.doubleclick.net.... and it pops up as frequently as once per minute as a new (active) tab. Twice in the time it's taken me to write this question!!
Please help as applecare doesn't seem to be valid for expresslane in Sweden.

I had a similar problem on unsafe web sites with Safari...The google AdSense is not so pop up proof as it seams.
The best thing is to use another navigator as Opera which really blocks the pop ups on nearly all the web sites.
I keep using safari for its reader option that i suppose will soon be on Firefox as it's the best that new Safari has for a long time ago!

URL blocking doesn't work on E4200

Similar Messages

Maybe you are looking for