URL displays when moused-over

Somtime in the dim past I enabled "Display url on mouse-over." Now I want to turn this feature off but I can't find where I turned it on. Anybody know where this feature is?

You're welcome. Glad to have helped.
Mahalo for the and Aloha from Big Island.

Similar Messages

  • Turn off metadata display box when mousing over photos?

    When mousing over photos in the viewer or browser, a box pops up next to the cursor showing metadata. I find this very distracting and annoying when editing a photo or confirming faces. In Aperture 2, you could turn it off under preferences, but for the life of me I can't figure out how to turn it off in Aperture 3 (metadata has a separate tab rather than controlling the viewing of metadata under preferences in A2). Hitting the letters Y and U work in the viewer and browser, respectively, but only for one photo - doesn't stop it for good. I've tried messing around with all the other metadata view settings. Any ideas?

    Hitting the letter T toggles the display, you can adjust this setting with Command -J.
    HTH
    wok4

  • The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:  "Extensions may not function properly because it does not meet the dependency conditio

    The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
    "Extensions may not function properly because it does not meet the dependency condition."
    OR
    Extension Status is not consistent with extension set configuration."
    The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension.  And I was presented with these warning symbols.  I haven't added anything, I haven't done anything that would cause this.
    Does anyone know how to fix this???
    I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version  6.0.8.28.
    Thanks in advance!
    Nina

    Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
    You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

  • When mousing over text, the cursor flickers constantly (with each letter passed) from arrow to i-beam and back.  The problem occurs in both MS Word and Pages.  Any idea of how to resolve this annoying problem is appreciated.  System: 10.10.1

    When mousing over text, the cursor flickers constantly (with every letter passed) from arrow to i-beam and back.  The problem occurs in both MS Word 2011 and Pages.  Any idea of how to solve this annoying problem will be much appreciated.  System 10.10.1 on a MacPro (Late 2013)

    The mouse is controlled by the OS so don't guess any app other than a mouse driver or OS X itself would be able to cause this sort of flicker issue.
    Have you seen the following and is it what you are seeing? Maybe you could make a movie (Quicktime is great for this this to make a screen recording) - but not sure how to attach a movie to these discussions as mine is grayed out and can't be selected (to the right of the insert image). Here is the what I found for a search of "mouse cursor flickers os x yosemite"
         https://www.youtube.com/watch?v=ZNQ0D84DdF4
    What kind of mouse are you using? Is the mouse driver up to date if it's a third party mouse?

  • Showing help text of controls when mouse over connector

    I'm working with a system where we have decided to use input clusters for all data to all vi:s. These clusters are saved as strict type defs.
    Our idea for documentation so far has been to write a description of what the vi does in the vi description, and describing the indata by documenting each element in the input clusters type defs.
    This works very well for documentation printing purposes. However, we cannot see the descriptions of the indata in the help pop-up when mouse-over the vi.
    Does anyone know a way of getting the documentation of the wired inputs to a vi when mouse-over the vi?
    Regards
    //Martin

    Do you want to (1) see the help info (description and tip) for the cluster when you're on the front panel of the VI that uses it, or (2) do you want to see the help info when you're on a diagram of a calling VI using the VI with the cluster as a sub-VI?
    1. In LabView 6.1 or 7.0, you will see the help info for a strict type-def control on the front panel of a VI that uses it. I saved a cluster as a strict type-def. I added description and tip for the cluster itself and for individual elements within the cluster. Then I added the cluster to the front panel of a VI.
    In either version 6.1 or 7, I can see the help info:
    I can see the description of the cluster or the individual element (depending on where the mouse is pointing) whenever I have context help open (Ctrl-H
    to toggle). I can see the tip for the cluster or individual element if the operate tool is selected.
    After I added the strict type-def control to a VI, I went back to the control editor and modified the description and tip, then updated the control on the VI and saw the new info.
    2. When you're on the diagram of a calling VI using the VI with the cluster as a sub-VI, the only help info (description and tip) available is what you entered for the sub-VI. You can't see the help for the individual controls on the sub-VI unless you open the sub-VI. On the VI with the cluster, you can cut and paste help info from the cluster to the VI. On the diagram of the calling VI, with the wiring tool selected, you can see the name of the sub-VI terminal, but not the help info for that terminal.
    Seeing the help for the individual control of a sub-VI when you're wiring it sounds like a good idea to me. Maybe in LabView 8?

  • Why can I not see the URL display when I mouse over a link?

    When I mouse over a link the URL does not display at the bottom anymore and I cannot figure out how to make it display so that I know where I'm going before clicking. I only just recently noticed this happening and am not sure what changed.

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

  • Data point display when mouse hovers over data point in TCODE QGC1

    Hi experts,
    Just want to ask if anyone knows how to add more data in the display when your mouse hovers over the data point in the control chart of transaction QGC1?
    Because currently the control chart shows u201CSeriesu201D and u201CValueu201D, Iu2019m planning to add the inspection lot date when your mouse hovers over the data point.
    Hope to have some response regarding this and thanks in advance

    Tohatsu,
    I am not sure exactly what you are trying to do but the way you have went about doing things is not the way to code in LV. Fist off break your code into functional blocks and use these functional blocks as Subvi's. This will make your block diagram easier to read. Once you do this you can get rid of a lot of code. Also you need to learn how to use the event structure, right now the way your code is set up to use it is not correct. Have a look at the examples that ship with LV. i am not even going to begin to try to understand your code because the diagram is so large. Please do not take all of this the wrong way I am not trying to be hard on you or anything, I am just giving you some constructive criticism..
    Break your code down into functional blocks and use subvi's to perform those blocks of code.
    Have a look at the examples on how to use an event structure.
    Have a look at state machines
    You would also benefit from getting the book called Labview for everyone, third edition, jeffrey travis and james kring.
    You have a lot going on in this VI. Use the eventstucture to your advantage instead of as a hinderence like it is now. the way your code is set up now everything runs in your while loop, then it waits for an event to fire. in your case the while loop will not run again until the mouse moves over the waveform chart. You are on the right track, you just need to get some fundamental basics down and you will figure out what is going on.
    Thanks for converting the code to 8.0 for me.
    Message Edited by Jhoskins on 01-30-2008 09:17 AM
    Joe.
    "NOTHING IS EVER EASY"

  • Hand cursor not displayed when mouse is over JEditorPane hyperlinks in 1.5

    Java version 1.5 does not show a hand cursor when the user mouses over a hyperlink within a JEditorPane, which it did in version 1.4.x.
    Create a new JEditorPane. Then set the content type (setContentType) as "text/html". Then use setText to add an html hyperlink. When the user mouses over the hyperlink, the cursor remains a pointer cursor. The cursor used to change into a hand cursor symbolizing a hyperlink.
    p.s.) The hyperlink still works, the cursor just doesn't change.
    Has anyone noticed this? Has it been reported as a bug? Is there a workaround?
    Thanks for any/all help!

    I have the same problem which I cannot seem to solve. I have a JEditorPane in a JDialog, not a JFrame, and I do not get a Hand cursor over the link. If I use a JFrame, I get the hand cursor.
    Any ideas? I tried with setting the cursor by hand using
    pane.setCursor(Cursor.getPredefinedCursor(Cursor.HAND_CURSOR)); in the ENTERED-part of a slightly more advanced hyperlink listener (gets pane in constructor). But that did not help either.
    Here is the code. Check out the difference between JDialog and JFrame.
    import javax.swing.*;
    import javax.swing.border.*;
    import java.awt.event.*;
    import javax.swing.event.*;
    import java.awt.*;
    public class HyperLink extends JDialog
         public static void main(String[] args)
              HyperLink h = new HyperLink();
              h.setVisible(true);
         public HyperLink()
              Container cp = getContentPane();
              JEditorPane p = new JEditorPane("text/html",
                                  "<html><body><a href='http://www.google.com'>Google</a></body></html>");
              p.addHyperlinkListener(new HyperlinkListener() {
                   public void hyperlinkUpdate(final HyperlinkEvent he) {
                       HyperlinkEvent.EventType type = he.getEventType();
                       if (type == HyperlinkEvent.EventType.ENTERED) {
                        System.err.println("entered");
                       else if (type == HyperlinkEvent.EventType.EXITED) {
                        System.err.println("Exited");
                       else if (type == HyperlinkEvent.EventType.ACTIVATED) {
                        System.err.println("Now going to " + he.getURL());
              p.setEditable(false);
              cp.add( p );
              pack();
    }

  • How to get text when mousing over image?

    Hey there, I am extremely new to Flash, but know other Adobe programs so tend to learn quickly.
    I desperately need to find out how to get text to pop up when i mouse over PART of the image and i havent been able to find any help online in the last two days (pulling my hair out in stress).
    Now i uploaded a rough mock up i did on Photoshop, so you can see when i mouseover the top layer of the cake i need a line to stretch out and the text to pop up at the end of it. Similarly if i moused over the cherry another piece of text needs to come up in the same manor.
    Also since i need it to be a website link so what format do i open it with when i go to FILE- NEW?
    Honestly thank you so much in advance to anyone that helps

    First you have to choose if you want to handle devices. If not and you want to stay in Flash I'll stick on topic.
    In the HTML version you could either use a good old fashioned image map (they're still fine in the HTML5 era) or you could use a layering technique (here's a random layering example).
    In Flash you can do it a few different ways. If you intend on keeping the image intact as a single object then you'll be essentially doing the same as an image map. You can draw invisible hitareas on the various parts of the object and have those areas trigger a specific function that will display your text. If you break up the image into the separate parts then you can directly assign those parts to fire off a function themselves.
    First I'd like to know your desired direction.

  • How to record menus that display when mouse hovers

    The software I am creating a training session for has
    pull-down menus that display when the mouse clicks on them or when
    the mouse hovers over them. I can only get Captivate to record the
    menus when the mouse is clicked - and cannot determine how to
    record the menus that display when the mouse hovers. Can anyone
    offer any suggestions as to how to fully capture the displayed
    software screens and menus? Thanks.

    > Thanks. The Print Screen works just OK - although it is
    a cumbersome and
    > the
    > timing is not as smooth as it could be. As I make a
    series of training
    > videos
    > over time and many menus will be missed and more retakes
    will be required.
    >
    You can change the timing yourself - just reduce the time the
    slide catch
    with print screen to a second or whatever works for you.
    Steve
    http://twitter.com/Stevehoward999
    Adobe Community Expert: eLearning, Mobile and Devices
    European eLearning Summit - EeLS
    Adobe-sponsored eLearning conference.
    http://www.elearningsummit.eu

  • Imported movie of hard disc not working. Blank square and when mousing over

    I have imported about 150 gig of mp4 video into my iMovie event library and no problems until now. The mp4's are stored on my external hard drive (1000gig) and add up to around 105 gig in total. iMovie is also stored on this hard drive. When I import into my event library everything was fine but now I have hit a point where any more mp4's come up in the event library as a blank file, when I mouse over them a still shot comes up of another pre-imported video that has nothing to do with that video and the file plays sound but there is no footage. I still have 50 gig of footage to import before I can start editing my movie.
    I still have 750 gig free space on my external drive and I am using a Macbook with 4 gig of memory and 48 gig of 119 still available on my Mac hard drive, is this the problem? Does anyone have any solutions ?

    Thanks again Tom, I worked out your clue, being "whoa" as to meaning I shouldn't have moved iMovie onto my hard drive, I have moved it back to my Mac and everything seems to be working fine now, fingers crossed. I am really getting good at importing now, but don't think you'll be rid of me just yet as I have a lot of editing to start in the near future!

  • How do I keep the name tags in Picasa Web Albums from appearing on the images by default? With Explorer, name tags only appear when mousing over the image, but with Firefox, all the tags appear on the picture as soon as it is loaded, which looks messy.

    I use Picasa to create web albums, and I tag people who appear in the pictures. With Explorer, the name tags do not appear on the pictures until I mouse over a specific person, at which point the tag appears. With Firefox, the name tags appear as soon as the picture is loaded, and only disappear when you mouse over the people in the picture. This makes the picture look messy; by default, one would want to see a picture without tags all over people's faces.
    The only way to "fix" this is to disable the name tags completely (or tell people to use Explorer!), but this is not an ideal solution, since I would like to be able to share albums with people's names in them.

    I use Picasa to create web albums, and I tag people who appear in the pictures. With Explorer, the name tags do not appear on the pictures until I mouse over a specific person, at which point the tag appears. With Firefox, the name tags appear as soon as the picture is loaded, and only disappear when you mouse over the people in the picture. This makes the picture look messy; by default, one would want to see a picture without tags all over people's faces.
    The only way to "fix" this is to disable the name tags completely (or tell people to use Explorer!), but this is not an ideal solution, since I would like to be able to share albums with people's names in them.

  • Link not showing hand icon when mouse over

    I am creating an image gallery and have thumbnails that open
    in a separate window to a larger version of the image.
    The links are working, but when you put the mouse over the
    image the little hand does not appear to show it is a link, if you
    click it works and the image opens, but the hand does not show,
    what have I done wrong.

    This implies that you have applied the behavior directly to
    the <img> tag,
    when you should have applied it to an anchor tag surrounding
    the <img> tag,
    e.g.,
    this - <a href="javascript:;"
    onclick="whatever"><img src="whatever"...></a>
    rather than this - <img onclick="whatever"
    src="whatever"...>
    You can get this by manually creating it, or by selecting the
    image,
    removing the behavior, then entering "javascript:;" (without
    the quotes) in
    the Link field of the Property inspector. This will wrap the
    <img> tag with
    the anchor. Now select the <a> on the Tag selector, and
    apply your
    behavior.
    As you can see, familiarity with HTML (and CSS) will come in
    quite handy
    when working with DW.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "PosterP" <[email protected]> wrote in
    message
    news:g49sdk$gtp$[email protected]..
    >I am creating an image gallery and have thumbnails that
    open in a separate
    > window to a larger version of the image.
    >
    > The links are working, but when you put the mouse over
    the image the
    > little
    > hand does not appear to show it is a link, if you click
    it works and the
    > image
    > opens, but the hand does not show, what have I done
    wrong.
    >

  • Flash 8 pro crashes when mouse over stage

    Can anyone help me out with this? I have Flash 8 Pro
    installed on my Windows XP Pro SP2 machine. Everything worked great
    when I installed it. Now, about a month after it was installed, it
    crashes anytime I move the mouse over the blank stage. I basically
    start Flash 8 pro, it loads OK, the interface comes up fine menus
    are accessible, etc. but the second I move my mouse into the center
    STAGE area, it crashes. Any help?

    never heard this issue before - did you try reinstalling?
    Chris Georgenes
    Animator
    http://www.mudbubble.com
    http://www.keyframer.com
    Adobe Community Expert
    *\^^/*
    (OO)
    <---->
    bhornedo wrote:
    > Can anyone help me out with this? I have Flash 8 Pro
    installed on my Windows XP
    > Pro SP2 machine. Everything worked great when I
    installed it. Now, about a
    > month after it was installed, it crashes anytime I move
    the mouse over the
    > blank stage. I basically start Flash 8 pro, it loads OK,
    the interface comes up
    > fine menus are accessible, etc. but the second I move my
    mouse into the center
    > STAGE area, it crashes. Any help?
    >

  • How can i highlight an image when mouse over an image in c#?

    I want to highlight an image when mouse goes there on image. The backcolor of image should change. Give a solution.

    Its for button. I need to highlight image. I have attached screen shot. I want to create like that in windows form.
    Hello,
    Based on my understanding, it just changes the background for that image to highlight them.
    So we could change the background for the control hosts these images, and in addition, the size mode should not be autosize, because we should keep some area to display the background.
    Regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for