URL, email links in Flash swf files shows up in search engine

Hi, can you please help? I post this problem a while ago.
My problem is: I developed a website in Flash 8 on the Mac.
The Flash swf file is displayed via Dreamweaver doc. When I do a
search and, when the site is found in Google, all the links used in
the Flash swf file appears in the snippets below the main title. I
would like to know where I'm going wrong, and how can I prevent
Google from displaying the URL and email details.
Do I need to use a preloaded, or do I need to put the Flash
swf movie file in a table in Dreamwever.
Many thanks,
Blue_Mac

>I don't know how this is happening then. Search engine
spiders don't
>read through compiled files like Flash.
Thanks, this is reassuring. Although it seems to have done
just that.
The following action script is where the details are coming
from. I've used the name 'whatever" as an example. I don't mind the
URLs on view as much as I mind my email address because of security
issues.
on (release) {
//Goto Webpage Behavior
getURL("mailto:[email protected]","_blank");
//End Behavior
I'll check my files again to see if I've miss anything out -
I have done this so many times already.
Regards,
Blue_Mac

Similar Messages

Flash swf file with web link only opens my safari home page not the link

I have a flash swf file with a simple web link. when i load the swf file and click the link it opens safari then loads up my homepage. It does not go to the link i clicked. if i choose internet explorer as my browser the swf file works fine.
I am running 2 G4's 10.2.8 & 10.3.9
safari 1.0.3 & 1.3.1
PLEASE HELP

Type '''about:addons'''<enter> in the address bar to open your Add-ons Manager.
Hot key; '''<Control>''(Mac:<Command>)''<Shift> A)'''
In the Add-ons Manager, on the left, select '''Extensions.'''
Disable a few add-ons, then '''Restart Firefox.'''
Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
If the problem continues, disable some more (restarting FF). Continue until
the problem is gone. After, you know what group is causing the issue.
Re-enable the last group '''ONE AT A TIME''' (restarting FF) until the problem returns.
Once you think you found the problem, disable that and re-enable all the
others, then restart again. Let us know who the suspect is detective

Disable link in embedded .swf file?

Hi, all,
I have embedded a flash .swf file in a topic, and it plays
just fine in WebHelp output.
The .swf was made as a banner in another application, where
the user clicks on the image to bring up a new window with its own
content. That link must be embedded in the .swf, because the html
code in RH just puts it there and lets it run.
I'm planning to insert a note to explain the dead link,
saying my presentation is only to show the swf. As it stands, it
displays a hand pointer, but a click generates a js error.
Is there a way to disable the link from the swf without going
back to the original developer?
Thanks.
Harvey

Hi Harvey
You said you omitted the JavaScript? Why? Was it causing
issues? Or is it the fact the link points somewhere you really
don't want it to?
If so, I'm thinking you could amend the JavaScript
to point it where you want.
Just thinking out loud... Rick

Flash SWF file within Swing JFrame

I was wondering whether its possible to open a Flash swf file within a JFrame
I am looking for a solution similar to the usage of Flash Activex control in .NET
thanks in advance
Vikas

I have read the forum link and other such entries in this forum. I have found the following:
1.) JFlash - a java based flash player. https://jflash.dev.java.net/
Could'nt find the app or the official site
2.) a few projects on sourceforge.org :
java flash bridge where you embed the flash inside an Integrated Browser Component
3.) SWT Flash integration.
I do not find any of these solutions satisfactory.except the SWT/Flash integration which I havent tried.
My question is that isnt there an easier and simpler way to :
Embed Flash into Swing app where actionscript and java can communicate.
I am aware of Remoting and web services. But It is a desktop app I am talking about.
Can anyone suggest anything?
thanks in advance..
from a very frustrated programmer....

Problems loading Adobe Flash SWF file

Our users are experienceing problems loading Adobe Flash SWF
files.
One example of a problem file is:
http://www.adobe.com/enterprise/accessibility/popup_acr8_accessibility.html
User traffic is flowing through a Cisco ASA firewall - these
problems do not seem to occur from home networks or a Netscreen
firewall. The Cisco ASA does NOT have http deep packet inspection
turned on, and any traffic initiated by clients inside the firewall
should be allowed. The symptom is that Internet Explorer will begin
to download the video, but will hang at some point along the way
(for this particular URL it hangs at about 7%). No error messages
are displayed, but the video never displays on the screen either. I
would appreciate hearing from anyone who may have run into this
before, or if someone can explain what is different about this type
of file from regular Adobe Flash, that might help figure out what
the ASA is objecting to. The ASA does not appear to generate any
log messages about denying this type of traffic either.
Thanks in advance for any help you can provide...

Thanks, but I use publish/export settings with GPU hardware acceleration and flash version 11.2 (and 11.8) but nothing happening.
And why gif file is not all transparenty then I insert on lightblue background? It can't export good quality? Also I use Photoshop, After Effects, Adobe Edge Animate. And nothing happening. Egde animate file .oam is not good for old website navigation. It can't be inserted in freeshop site from navigation... I use logo file .oam just for example here - http://e-shoptagras.graphicsrim.eu
In reality I want swf file, but we don't find why logo flickering? here http://tagraseshop.graphicsrim.eu
All file's are transparenty - https://mega.co.nz/#!f8B2CD5R!J8uCJt9Sdq4Suz4HLhTHz8bzJcSWXMBIKcKZgkD3z8c
I need help! Please!

Bringing Flash .swf files into Captivate

Greetings,
I use Captivate 2.0. I have been trying to bring a Flash .swf
file into Captivate with very little success. The flash file is
clickable (so that users can review case study information as they
complete Try It simulations). When I bring the Flash .swf file into
Captivate, it works. However, correction (or failure messages)
display every time the user clicks the Flash .swf file. Is there
anything that I can do within Captivate to stop this issue?
Ideally, I would like the Flash .swf to run on top of the Captivate
file so that users can view the case study details without having
to see the failure messages.
Please let me know if you have any questions about this. I
hope it makes sense to you.

Hi Zabcde (or PMW or P?)
Can I just understand (sorry for being thick) your situation.
You're trying to get a flash movie into a captivate session that
the user can work on, see, interact with whilst they're also going
through a Captivate simulation (try it)? Does that mean that slides
are advancing for the simulation whilst you're watching the flash
movie? Or are they watching the Flash movie as a kind of help to
then go and do the Try It session?
If it's the first, then I would suggest calling the Flash swf
and the Captivate swf as seperate instances in flash (using
loadmovienum or something). If it's the second, you should be able
to remove the failure captions from that slide so they don't bug
you.
Apologies if I've got the wrong end of the stick though
Cheers
AJ (jiminiCricket)

Is there any app to support Flash swf files on iPad?

Is there any app to support Flash swf files on iPad?
Thank You

Depending on what sites you are trying to access, you might find that some of them (probably more so if they are news sites) have their own apps in the App Store which might let you get some of the content that you want (and there is the built-in YouTube app). Also there are browsers such as Skyfire which 'work' on some sites - but judging by the reviews not all sites. If you want to play flash games then you are out of luck if you want to play on-line, but again some of them have app versions in the store.

Accessing movie clip from flash swf file

I have the situation where in flash i created a simple
animated movie clip with few stop() commands on timeline. Movie
clip consists of simple animatio played on roll over and on roll
out which is controlled using actionscript. I loaded movie clip
into flash using [embed] tag but actionscript code is stripped,
there is no stop() action so movie clip loops continously. I guess
that's normal behaviour for embedded flash swf files but i would
like to know is there a way to still achieve that? Can i load swf
some other way with its actionscript and then control movie clip
from flex?

You need the FLA's to open in Flash.
You could download the free trial of a flash decompiler
(www.sothink.com). The free trial won't give you actionscript, but
it will give you all of the art in the swf.

Does Keynote Import Flash SWF Files?

Hello,
I do a lot of presentations and I often need to import Flash SWF files and play them inside my presentation. I currently do this on Windows with PowerPoint.
Does Keynote '09 import Flash SWF files?
Thanks!

PeterBreis0807 wrote:
To have Keynote accept and play Flash files go:
+Apple Menu > System Preferences > QuickTime > Advanced > check Enable Flash+
Peter
Alas I don't see that option — having said that I looked at mime types and legacy encoders and nada, but oddly when I went to check the QT version (7.6 by the way) in the "About Quicktime" (accessed via the *System Preferences*) it cycles thru various codecs and "Macromedia Flash Player" is one of them... guess it doesn't access anymore. :o(
Advanced lists only...
Default Synthesizer:
Transport Setup:

I made a free website using iweb and my host is dropbox but it is not showing in every search engine,i have to use a proxy for my site to pop up

i made a free website using iweb and my host is dropbox but it is not showing in every search engine,i have to use a proxy for my site to pop up

Possibly because dropbox is not really a proper webhost - it might be better if you went and signed up for proper web hosting from somewhere like http://www.godaddy.com or http://www.hostexcellence.com.
Have you told Google that you site exists? If not, then you need to do so - http://www.google.com/addurl.

Can I create more than one URL link in a single Flash (SWF) file?

I created a simple SWF slideshow in Flash with 5 slides. I was able to link one URL to the whole file by adding an alpha button.
What I can't figure out is how to add a URL link to each slide. The SWF file i sused on a website and I would like to be able to click on a particular slide as it is playing to go the a site or page that applies to that slide.
Is there a way or code I can use to do this??
This is the code I am currently using for the button now.
ja_btn.addEventListener(MouseEvent.CLICK,mouseClick);
function mouseClick(event:MouseEvent):void
var request = new URLRequest("http://www.jakeandamos.com/");
navigateToURL (request,"_blank");
I am just learning this stuff so I can use your help, Thanks!

You cannot duplicate instance names or function names, so you'll need to create unique names for each one that behaves differently. So you can only have one function named "mouseClick"... if you want to have another function to link somewhere else you need to create a new name for that function ("mouseClick2" would work)
There are alternate approaches, but for now this will be the easiest for you to deal with.

Flash swf. file will only show in template and not linked pages

I placed a swf. file on my template page in a non-editable region. I then updated all the files that were linked to that template.
I then looked at the linked pages in Dreamweaver and I can see the image of the swf. in all the affected pages.
However when I check the pages through the browser the swf. is not there.
I'm using Dreamweaver cs3. Can anyone help?
Thanks,

Hi
I do not use dw templates, but the problem is probably with the linking. Also if your swf file is linking to other files then all your html pages must be in the same position in your file structure as your original, (working) html page, otherwise the link references will be wrong.
PZ

Linking URLs to InDesign CS5 exported .swf files

I primarily work in print design, but I've exported a few animated .swf files of web banner ads from InDesign CS5, and the folks on the receiving end can't use them because they're unable to link them to a URL (in whatever manner they're able to with other Flash files). I was hopeful that I could open the files in Flash and edit them there, but it seems not to be an editable file. It's been pretty frustrating watching work go down the drain and people have to settle for less glamorous static ads. Does anybody know a solution?

I think I may have responded to this in the community help section, but I'll repeat what I said there. InDesign has some impressive Flash capabilities but using it to create an entire website....no, not a good idea at all.
The size of the SWF files is a major issue and they are quite simply not suitable for this purpose. Additionally, an entire website in Flash is an SEO nightmare so it won't matter how long it takes to load since nobody is likely to find it.
Flash should be used judiciously on the web. In fact, I never use it. All that said, the only advice I can offer if you decide to ignore the rest of it, is to export to FLA, open it in Flash Professional and finish it up there.
Bob

Flash .swf file not appearing in browser when publishing from iWeb 3.02

I have been working on a site for the last couple of months that i created in iWeb 2.0 and had successfully had small flash movies that I embedded via html snippets from code provided by numerous sources and youtube videos demonstrating how to get flash movies into one's site.
The url is
www.almafoods.com
Today i upgraded to 3.02 and had to make a change to the home page. The domain opened up fine with all the HTML code and .swf on the page exactly as I had it in version 2.0
When I now publish to a folder, first of all it doesn't copy over the .swf file unless I create a link to the file, but even when I upload all the directories to my ISP's remote server, the movie isn't not showing up in the browser. The html code file and .swf file are in their correct directories on my ISP's remote server
I'm baffled as to what is going on here as its the exact same domain that worked perfectly in 2.0 and this has peed me off no end
Does anyone have any suggestions or encountered the same problem in 3.02?
Any advice would be very much appreciated

Your .swf files are in the same folder as the widget-markup files.
Keep your custom files OUTSIDE the folder with the sitename iWeb creates.
iWeb will overwrite everything when it needs to do that, wiping out your custom files.
Put the files in a separate folder and determine the link to these files.
Read this : Using the iWeb HTML Snippet
Besides that, to display these tiny pictures I wouldn't use Flash.
Read this : Create a Banner Slideshow
And then look at this page : My House

How to attach a Callto Link to a swf-file?

Hi,
I'm currently working on an animated skype button (swf-file) which I included into my website and I'd like to attach the following command to it:
Callto://myskypeid
It would be perfect, if - when hovering on it - it shows that it contains an active link (showing the "hand") and when clicking on it, it calls the user's skype app. to phone me on skype
So, in the adobe tutorials I found the following code for inserting a "hyperlink" to a button.
import flash.events.MouseEvent;
function gotoAdobeSite(event:MouseEvent):void
   var adobeURL:URLRequest = new URLRequest("http://www.adobe.com/");
   navigateToURL(adobeURL);
linkButton.addEventListener(MouseEvent.CLICK, gotoAdobeSite);
I customised the code:
import flash.events.MouseEvent;
function openskype(event:MouseEvent):void
   var Skype:URLRequest = new URLRequest("Callto://myskypeId");
   navigateToURL(Skype);
linkButton.addEventListener(MouseEvent.CLICK, openskype);
But the problem is that there occur "linkbutton not defined property or method" errors when running the code.
My swf or rsp. my fla file contains 10 movieclips which run one after another on the timescale, all in different layouts so that the colour changes during the "run".
I tried it with the first movieclip - layer1 - and named its instance "linkButton".
Didnt work.
Then I tried to insert another layer and attached another picture with alpha=0, converted it into a button and gave its Instance the name "LinkButton", but also didnt work.
Can someone please help me here? I suppose its just a "small" mistake and I couldn't be "so far away" from succeeding...
That would be great! Thanks for the help in advance!!

Hi Ned and all the others,
ok ...the problem isn't really fixed so far.
But the first step is done! :-) with the following code:
import flash.events.MouseEvent;
function openskype(event:MouseEvent):void
   var Skype:URLRequest = new URLRequest("Callto://myskypeId");
   navigateToURL(Skype);
linkButton.addEventListener(MouseEvent.CLICK, openskype);
I replaced the "Callto://myskypeId" with "skype:myskypeId?call" as the first syntax shows a wrong Skypname resp. the name will be shown with a "/" in the end.
But now i'm faced with the problem, that
1st: there's no "hand" shown, when hovering the button on the website.
2nd: I have to doubleclick on it to open the skype application.
3rd: after i doubleclicked on the button there opens up always an additional blank page shown in the browser. And now I try to fix that - I tried it with navigateToURL(Skype, "_self"); or "_parent" and so on...but didnt work.
Meanwhile I think the because of not all of the pictures - MCs - are attached to the instance of "linkButton" that there's the missing "hand" when hovering with the mouse the button. On testing i found out that some of the pics are still bitmaps although i converted them all in the beginning to MCs (??dont know what i did there...).
Think the "missing hand" problem will be fixed more easily.
The bigger problem is, how to avoid the additional blank page in the browser when clicking on the swf on the website?
It seems to me, that on the one hand, I'd like to have an "active" link on that swf (or button) that shows the "hand" in the mousepointer - but on the other hand, it's not really a website which I'd like to open up then but just an application. So maybe here's the main problem.
Alternatively I thought about replacing the sequence with the URL request in the code by something rather appropriate for lauching applications e.g. FS Command or something like that. (read that somewhere).
If someone knows/had similar problems/could help me again - or at least to the next step that would be perfect!
Thanks again, Ned for your helping advice (I learned something!!!) - maybe you could help me with the above probs?
Best regards
steff

URL, email links in Flash swf files shows up in search engine

Similar Messages

Maybe you are looking for