URL Error for all Webdynpro Aplication's

Hi,
i can nor run any webdynpro aplication und i recive follow Errorlog in "st11"
in hostfile are 2 IP-adress registrated:
127.0.0.1       localhost
10.10.0.10      AFLAKI
and all services are aktive.
What can i do ?
14.07.2009                                             RSTR0006: Display Developer Traces                                                    1

Hi Reza,
First try to check your SAP portal is properly opening or not.
If not, then please check your computer name and update the host file.
For updating host file --> Go to START > Run > Enter "Drivers" then etc->host file. update your IP and computer name.
Hope this will help.
Thanks
Arun

Similar Messages

We are running 3 batches parallel(a.ksh,b.ksh,c.ksh parallel ) .if a.ksh will complete then d.ksh will start('d' start when 'a' will terminate successfully) and we have to handle error for all jobs ( if some job got aborted during runtime) ?

we are running 3 batches parallel(a.ksh,b.ksh,c.ksh parallel ) .if a.ksh will complete then d.ksh will start('d' start when 'a' will terminate successfully) and we have to handle error for all jobs ( if some job got aborted during runtime) ?

Moderator Action:
You already asked this question, two days earlier.
https://forums.oracle.com/thread/2585158
Stay with your original post. Deliberate multiple posting is the same as spamming the forums.
This new post is locked.

Trying to resolve a "_OBJC_METACLASS_$_CDVCommandQueue" with MainViewControllers.a, MainViewControllers.o, 7 in total. Apple Mach-O Linker error for all 7. Thanks to any assistance.

Trying to resolve a "_OBJC_METACLASS_$_CDVCommandQueue" with MainViewControllers.a, MainViewControllers.o, 7 in total. Apple Mach-O Linker error for all 7. Thanks to any assistance.

No I didn't even read through your post, to long.
You said that "No matter what program I try to install, as soon as the installer opens it crashes". Were you talking about the install for this/these 3D programs or ANY program? As it is worded it sounded like ANY program. That tells me there is a problem with your Mac, software or hardware.
Now you say others install programs, which is it. Programs other then the 3D ones install or no programs install?
Could simply be your Mac is to old to run these programs and the installer knows that. You never said what model or year Mac it is.

CFCHART only works for pie, invalid attribute: autoAdjust Error for all other types

CFCHART only works for pie, invalid attribute: autoAdjust
Error for all other types.
Im just trying to render a simple bar chart, and it works on
the developer server, but not in production.
Any tips?
Dave

It's 7.0.2
But I have not tried this yet...
ColdFusion MX 7.0.2 Cumulative Hot Fix 2
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=kb400996
I'm worried that If I apply that hotfix, something else will
break :(
ANd I wont be able to un=do it, and I'm not able to
re-install CF if it all goes tits up.

The specified file or folder name is too long,the url path for all files and folders

The specified file or folder name is too long,the url path for all files and folders must be 260 character or less
can we increase this limit?
MCTS,ITIL

Hi,
As I understand, you want to increase the length of URL path in SharePoint 2010.
Per my knowledge, this limit cannot be increased. SharePoint limits URL length because all relative URL links are stored in the clear forms on the SharePoint content DB and often this links are used as primary keys to link one table with another. Fields
which are used to store these links (for instance tp_DirName from the AllUserData table) allow storing only 256 characters.
There are several ways that you can resolve or mitigate URL length problems in the SharePoint Server 2010 environment. The following list provides suggestions:
1. Upgrade all the end-user browsers to Internet Explorer 8, which has a longer URL length limit.
2. Use shorter names for sites, folders, and documents and control the depth of the site and folder structures to reduce the lengths of URLs.
3. If possible or allowed, use ASCII names for sites, folders, and documents. This will avoid situations where the URL will be lengthened by being encoded.
4. To reduce the risk that the SharePoint Server 2010 end-users will encounter problems because of URL length limitations, we recommend that you apply the following effective limits in the deployment:
256 Unicode (UTF-16) Code units - the effective file path length limitation, including a domain/server name
128 Unicode (UTF-16) Code units - the path component length limitation
More reference:
http://technet.microsoft.com/en-us/library/ff919564(v=office.14).aspx
http://sharepointknowledgebase.blogspot.in/2013/04/url-path-length-restrictions-in.html#.VKJN53BJA
Best regards,
Sara Fan

How to disable end user personalisation for all webdynpro application.

Dear Experts,
I have a requirement where I have to disable the end user personalization of each and every
webdynpro application in my server.
I know how to disable the personalization of a single application or a single component, but my requirement is to disable the personalization of all applications.
Request you to please suggest.
Warm Regards,
Upendra Agrawal

Hi,
As per SAP help,
Customizing: User-Independent, Client-Wide Modifications
While a single user u2013 during a personalization process u2013 can manipulate his or her own settings, an administrator has the option of executing Customizing settings for all users. Technically, this procedure is not different from personalization; both take place at runtime of an application. The difference lies in the range of the settings. In addition, for these global settings an application must run in a special administration session. This is always automatically the case if an application was started in the portal in the preview session. Independently of the portal, you can start an application in the following manner from within the workbench in administration mode:
Double-click the name of the application in the object list.
In the Web Dynpro Applications menu in the upper, left-hand corner of the Workbench window, choose Test Execute in Admin Mode .
The configuration mode is passed to an application as the sap-config-mode=X URL parameter.
Note
All the adjustments made by the administrator in admin mode are stored as client-specific. Presently no option is available for structuring smaller user groups on an administrative basis. Since cross-client adjustment applies to the respective configuration, the structuring of smaller groups can be implemented currently through the maintenance of different configurations.
End of the note.
You start personalization by calling up the context menu for the respective UI element in your application. In the corresponding context menu for an administrator (that is, with URL parameter sap-config-mode=X), in addition to the standard settings administrators have the option within a UI element container to sort either single lines (Grid, Matrix aund RowLayout) or single elements (FlowLayout).
Note
Administrators require special authorization for client-wide modifications. This can be a developer authorization or the special authorization S_WDR_P13N. You cannot create configurations at design time with this authorization, but you can make modifications at runtime.
End of the note.
These modifications are valid for all users but take place in the current client only.
Thanks,
Chandra

Error - for all entries in itab

Hello guys !!!
I have the following select queries....
select * from vbrp into table itab.
select * from vbpa into table i_vbpa for all entries in itab
where VBELN = itab-vbeln and ( PARVW = 'Z2' or PARVW = 'Z3').
select belnr awkey from bkpf into table i_bkpf2 for all entries in itab where xblnr = itab-vbeln.
I get the following error in 3rd select query.....
When you use the addition "FOR ALL ENTRIES IN itab", the fields "XBLNR"
and "ITAB-VBELN" must have the same type and the same length.
But if i try to change the data type of the field ITAB-VBELN to - " VBELN(16) TYPE C " then i get the following error....
When you use the addition "FOR ALL ENTRIES IN itab", the fields "VBELN"
and "ITAB-VBELN" must have the same type and the same length.
How to i solve this problem ?????

Hi,
This is because XBLNR is 16 char length and VBELN is of 10.
So before passing itab to 3 query;
select belnr awkey from bkpf into table i_bkpf2 for all entries in itab where xblnr = itab-vbeln.
Create an intermediate itab with structure of vbeln with length 16 and transfer all data to this itab.
Then do as;
select belnr awkey from bkpf into table i_bkpf2 for all entries in itab where xblnr = itab1-vbeln.
Since you are using only vbeln in for all entries its even enough for the intermediate itab to have only one field to hold the values of VBELN. But you should add leading zeroes( by CONVERSION_EXIT_ALPHA_INPUT) before passing it in the query.
Regards
Karthik D

401 Error for all files after CF8 install?

After I install coldfusion 8 on windows server 2008 with IIS7, I get a 401 "Unauthorized user" error for every page, regardless of whether its a CFM page or not. When I uninstall CF8 the error goes away. Has anyone else had this issue? Is there a resolution?

I was getting the same "-36" error while trying to backup to a Lacie firewire external drive.
I had a lot of people telling me to re-format, erase, reinstall, run utility programs ... yada, yada, yada.
First off, test to see if it is the connection type (firewire). I reconnected the offending external drive via USB, restarted the drive and ... BINGO! ... all transfers went perfectly.
Once i knew it was the firewire connection and not the drive itself i simply unplugged my iSight camera (the only other firewire device connected to my machine), reconnected my external drive via firewire and the problem is now corrected.
Firewire buses seem to be very finicky things ... i would suggest eliminating all firewire devices from the machine (except, of course, the external drive you're trying to transfer to) and see if the problem goes away.
Like i said, i simply unplugged my iSight camera and the transfer to my external drive went perfect and my transfer rates went from an average of 4MB/sec to over 19MB/sec.
P.S. BTW - prior to the error and after i corrected the error by unplugging the iSight camera, my internal and external drives all checked out 100% on Disk Utility, Disk Warrior and TechTool Pro.

"invalid web service URL" error for create web service system

Hi.
I want to call web service in visual composer and try to create Web Service definition.
When I push create button in visual composer, I got "invalid web service URL" error.
My web service is located in SAP ABAP System and I can check WSDL URL in web service homepage.
(http://mycompany.com:8000/sap/bc/srt/rfc/sap/ZTEST?sap-client=500&wsdl=1.1)
Any ideas for this error ?
Regards, Arnold.

Hi
Please can you create the web service in the portal as a portal system, this will work and you will be able to see the service in Visual Composer.
Jarrod Williams

New Apache sites return 500 Internal Server Error for all CFML requests

This is an ugly one. I think it is an Apache2 - ColdFusion 9 web server connector problem.
I have two Solaris Unix web servers. Each of these servers have a dozen and a half Apache web sites each one connected to one of five ColdFusion instances.
All, but TWO of them are working properly. We created two new Apache web sites and connected them to a new ColdFusion instance. This worked fine on one of our boxes, the development one, but not on the other, production of course.
Whenever we try to request a cfm url from one of these sites on the production server we get a 500 Internal Server Error. HTML pages serve up just fine, and the new instance's Administrator runs fine on its 8305 port. So both Apache and ColdFusion seem to be working independently, but they are not talking to each other. All the other Apache sites connected to the other four ColdFusion instances also work properly.
This has led me to investigate the web server connectors. They have always been tricky and problematic to set up on these boxes. The built in tools have never worked for us on these boxes and we have always had to manually compile the connectors and configure the connections in the web sites..
But, as far as I can tell, all the connection setups are the same between working examples and these non-working sites.
Any insights into what else I should be checking and|or how web server connectors actually work (they have alwasy been mysterious black boxes to me) would be greatly appreciated.
TIA
Ian

Some more information.
I took a closer look at the logs (I wasn't looking
in the Apache logs before). I found this block for the last attempt to
request a cfm page.
[Tue Nov 23 15:17:17 2010] [notice] jrApache[18177: 60758] could not
open serverstore "/opt/jrun4/lib/wsconfig/www/jrunserver.store": No such
file or directory[Tue Nov 23 15:17:17 2010] [notice] jrApache[18177:
60758] Couldn't initialize from remote server, JRun server(s) probably
down.
What I don't understand is why could it not open that file, it is there
and it has the same permissions as all the other web server connectors.
/opt/jrun4/lib/wsconfig/www
$ ls -al
total 166
drwxr-xr-x   2 root     root         512 May 29 13:51 .
drwxr-xr-x   8 root     root         512 May 29 13:51 ..
-rw-r--r--   1 root     root          14 May 29 13:51 jrunservers.store
-rwxr-xr-x   1 root     root       81528 May 29 13:51 mod_jrun20.so
The following is the 'calpip' connector folder that is working just fine.
/opt/jrun4/lib/wsconfig/calpip
$ ls -al
total 166
drwxr-xr-x   2 root     root         512 May 29 13:51 .
drwxr-xr-x   8 root     root         512 May 29 13:51 ..
-rw-r--r--   1 root     root          14 May 29 13:51 jrunservers.store
-rwxr-xr-x   1 root     root       81528 May 29 13:51 mod_jrun20.so

Reader 9.3 produces Runtime error for all .pdf files on hard drive and email

Does anyone have a resource that can show me how to eliminate a runtime error with Reader 9.3.1, Windows XP w/ SP3 and IE7. I have recently had all .pdf files located on my hard drive and in emails refuse to open because of this message:
"Runtime Error!
Program C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
So far, I have uninstalled and reinstalled Reader 9.3 from the website; added update 9.3.1 and tried to reopen files with no success.
My organization sends a ton of .pdf files and it is not good when you can't open them for review and action.

Hi All,
Although I don't normally post in forums, I thought it prudent to lay this matther to rest. I have tested the following solution:
It appears that Adobe Reader likes to check access to each parent folder as well as the actual application data folder. Apparantly there are other programs that also do similar things. As a result if you have your appdata redirected to \\server1\profiles\%username%\appdata adobe reader would first try directly access \\server1\profiles. If the user does not have to Traverse folder permission, this fails. Typically you will need to change your permissions on you profile share from:
-                   Users - Read Attributes (Apply to: This folder, subfolders and files)
-                   Users - Read Extended Attributes (Apply to: This folder, subfolders and files)
-                  Users - Create Folders/Append Data (Apply to: This folder, subfolders and files)
-                   Users - Read Permissions (Apply to: This folder, subfolders and files)
To the share permissions suggested by Microsoft in KB 274443:
-                   Everyone - Create Folder/Append Data (Apply onto: This Folder Only)
-                   Everyone - List Folder/Read Data (Apply onto: This Folder Only)
-                   Everyone - Read Attributes (Apply onto: This Folder Only)
-                   Everyone - Traverse Folder/Execute File (Apply onto: This Folder Only)
Hopefully this helps everyone.

Unable to read the source URL error for cffeed

Hi,
I am using the cffeed to read from my twitter RSS feed but I get this error:
Unable to read the source URL.
Status Code: 400. Try adding or changing UserAgent attribute in the CFFeed tag
My code is:
<cfset feedurl="http://twitter.com/statuses/user_timeline/somenumbers.atom" />
<cffeed
source="#feedurl#"
properties="feedmeta"
query="feeditems1" overwrite="true" />
It works but suddenly it stops and it takes time about 15 minutes or more to work again.
Can any body help me with this?
Thanks,
Mandana

One thing which I did not mentioned is I want to have 6 pages rss feed together and I made it like this:
<cffeed
    source="#feedurl1#"
    properties="feedmeta"
    query="feeditems1" overwrite="true"
    useragent="Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; WOW64; Trident/4.0; GTB6.6; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET4.0C; AskTbBLPV5/5.11.3.15590)" />
   <cffeed
    source="#feedurl2#"
    properties="feedmeta"
    query="feeditems2" overwrite="true"
    useragent="Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; WOW64; Trident/4.0; GTB6.6; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET4.0C; AskTbBLPV5/5.11.3.15590)"/>
I did it for 6 pages, each one with one cffeed and then:
<cfquery name="feeditemstotal" dbtype="query">
    select * from feeditems1
    union
    select * from feeditems2
    union
    select * from feeditems3
    union
    select * from feeditems4
    union
    select * from feeditems5
    union
    select * from feeditems6
</cfquery>

IOS Update is failing !! Error for all devices !

iPhone, iPad IOS 7 updates are not working !
Error keeps showing up! What to do ?
iTunes is not showing that an update is available at all!

Well i guess is because we all want to get our gadgets updated , which means that we are all trying at the same time. Just give it a little time and it will work , maybe they have just put it out I am waiting for it too , but it says that it can't search for an update right now

Can't load data to cubes - same error for all DTPs "exception in substep write to fact table"

Hi Experts,
This initial DTP error is:
Data package processing terminated Message no. RSBK229
Error while updating to target <cubename> (type INFOCUBE) Message no. RSBK241
If I drill down to the specific package in the process monitor the error is: "exception in substep write to fact table" .
No more details for why the error is being generated.
SAP BW 307 service pack 8.
I have run the debugger without success, an ABAPer also ran debug mode to get more details on the error without success
We checked teh termination point and the ABAP stack
No error stack is available
No short dumps
I have reactivated the DTP
The data looks fine
The server crashed the day before the DTPs started to fail
One cube is standard content and the other is a Z version of the same cube.
Please let me know if anyone has resolved this issue before and what steps were necessary.

Hello Russell,
We have got the similar situation and we later found that it was a data issue only.
We tried to enable the error stack, but as the data issue was due to a lookup which is bringing the invalid data, its not captured in the error stack and throwing short dump with the message u mentioned.
so my suggestion, just put a break point if there are any lookups and check the data in internal tables if everything is as expected.
Hope this helps.
Thanks,
Venkata Naresh

URL Error for all Webdynpro Aplication's

Similar Messages

Maybe you are looking for