URL error when processing request ITS 6.40

Hi all
I have a problem at customers site and below is a description of the case. All input in this issue is appreciated of course since I am running out of ideas.
Problem:
When accessing transaction WW20 via internet explorer (http://server.domain:8000/sap/bc/gui/its/ww20?sap-client=100) I got an error when processing request.
It basicly says: Communcatione failure. However ST22 and SM21 does not say anything about this.
The errorcode on the webpage returns:
Error code: ICF-IE-http -c: 100 -u: IAMWEB -I: E -s: KAY -i: ksnoka_70_KAY_01 -w: 0 -d: 20080702 -t: 153240 -v: IMC_CANCEL_TX -e:
note: KAY is SID for the system and ksnoka is the hostname of the windows server.
OBS: Calling transaction WW20 in sapgui localy works fine but not via ITS. Webgui works fine and I have checked follwoing:
- Paramteres in RZ10 - should be ok!
- SICM up and running
- run report RSXMB_ACTIVATE_ICF_SERVICES in SE38 successfully
- W3_publish_services in SE38 ticked all in package S_webgui and S_ITSP.
Note the WEBGUI service works well;
Also when I run a test link: "http://ksnoka70.corp.kagroupad.com:8000/sap/public/ping" It gives me a message "Server reached successfully" - so I assume it's all ok with the web serwer.
The customer has set up this WW20 transaction as a service in SICF.
Looking forward to some input. Cheers ...//Pelle

> Problem:
> When accessing transaction WW20 via internet explorer (http://server.domain:8000/sap/bc/gui/its/ww20?sap-client=100) I got an error when processing request.
> It basicly says: Communcatione failure. However ST22 and SM21 does not say anything about this.
Do you see anything in the trace in transaction SMICM?
Markus

Similar Messages

  • Error when processing Request

    Hi,
    I am trying to create Shopping Cart but I get following errors.
    *The following error text was processed in the system SRM : Attribute for user 192658 contains errors. Inform system admin.
    *The termination type was: ABORT_MESSAGE_STATE
    *The ABAP call stack was:
    Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
    Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
    Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
    Can anyone pls help me as how to resolve this error.
    Thanks,
    Prem Kumar

    Hi
    Can you run this report for that particular user in EBP ?
    se38 ->BBP_CHECK_CONSISTENCY - for Shopping cart or PO.
    Hope that you get error message for that user. so you can trace what are the attributes are missing?
    regards
    Muthu

  • MSS Reports - Error when processing your request

    Hi Experts,
    We got the following error, while executing MSS reports. Would really appreciate kind guidance to reslove the issue.
    Error as below:
    Error when processing your request
    What has happened?
    The URL http://m2003075d.**********/sap/bc/gui/sap/its/HRWPC_FC_EXEC was not called due to an error.
    (Intentionally kept **** to kept confidentiality about the client)
    Note
    The following error text was processed in the system ECQ : Template interpretation cancelled, syntax error.
    The error occurred on the application server M2003075D_ECQ_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    SYSTEM-EXIT of program SAPLSLVC_FULLSCREEN
    Function: REUSE_ALV_GRID_DISPLAY of program SAPLSLVC_FULLSCREEN
    Form: DISPLAY_LIST of program RPTQTA10
    END-OF-SELECTION of program RPTQTA10
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system ECQ in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server M2003075D_ECQ_00 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server M2003075D_ECQ_00 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 200 -u: MANAGER1 -l: E -s: ECQ -i: M2003075D_ECQ_00 -w: 0 -d: 20090710 -t: 160454 -v: RABAX_STATE -e: ITS_CANT_LOAD_INCLUDE
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Thanks in advance,
    Aashish

    Hi,
    You need to Publish the services in a proper sequence, then only it will get activated.
    Also switch between SAP GUI for windows and SAP gui for HTML, because if you are accessing the system through network, problem may arise.
    Try switching between these launchpads, might help you.
    Publish the WEBGUI first, SHUFFLER then, and dont forget to publish completely, else it wont work.

  • Error when processing your request

    Error when processing your request
    What has happened?
    The URL http://vinay:8000/sap/bc/webdynpro/sap/zfirst_web was not called due to an error.
    Note
         The following error text was processed in the system NSP : Die URL enthält keine vollständige Domainangabe (vinay statt vinay.).
         The error occurred on the application server vinay_NSP_00 and in the work process 0 .
         The termination type was: RABAX_STATE
         The ABAP call stack was:
    Method: CHECK of program CX_FQDN=======================CP
    Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
    Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP
    What can I do?
         If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system NSP in transaction ST22.
         If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server vinay_NSP_00 in transaction SM21.
         If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server vinay_NSP_00 . In some situations, you may also need to analyze the trace files of other work processes.
         If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 001 -u: BCUSER -l: E -s: NSP -i: vinay_NSP_00 -w: 0 -d: 20090622 -t: 074756 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team

    Hi Thomas,
    I realize this is a rather old discussion, but I wonder if you know whether running transaction SGEN to generate the loads for either all web dynpros or just a particular transport containing a custom web dynpro would resolve the slow response time and timeout. After a customer message with SAP, this was their suggestion, however our Basis team is skeptical that this will have the desired effect. We noticed the issue when moving from development to QA so we won't know if this is the solution until we try it in production upon go-live.
    Cheers,
    Amy

  • Error when processing your request -syntax eror in program /1BEA/SAPLCRMB_O

    Hi All,
    I have regenerated Billing Application in CRM 7.0. From then I am getting a dump on Web UI . Error as below.
    Error when processing your request
    The URL http://hostname/sap/bc/bsp/sap/crm_ui_frame/bspwdApplication.do was not called due to an error.
    The following error processed in the system: "syntax error in program /1BEA/SAPLCRMB_O".
    This Dump does not occur every time. now & then I am getting the dump but not every time. mostly it comes when I process any thing for the first time on UI.
    Please help me out to fix this dump. it is a standard program so we can not correct the program. Please let me know if there is any other way to fix this problem.
    Thanks in advance
    JM

    Hi,
    This is not a standard program, this is a generated program through billing engine. I guess you'd have to regenerate the program. Talk to your functional folks who created this.
    Regards
    Prasenjit

  • SNC: ASN - Error when processing your request

    Dear experts,
    we are implementing SMI scenario with SNC 5.1, we have created in SNC Web UI a Replenishment Order and we have published it now Iu2019m trying to create an ASN releted to that RO but I have another strange error with ASN, could you please have a look and tell me your opinion?
    From RO details I click on u201CCreate ASN for Itemsu201D, I insert all the information needed and all checks are successifully passed, but when I try to publish it the following error screen appears me.
    This error appears also when I try to save a draft of the ASN.
    Error when processing your request
    What has happened?
    The URL <url> was not called due to an error.
    Note
    The following error text was processed in the system <System name>: Syntax error in program /1BCPPF/CL_100SCABOL_DLV_X====CP .
    The error occurred on the application server <application server> and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: EVALUATE of program CL_METHOD_CONDITION_PPF=======CP
    Method: EVALUATE of program CL_CONDITION_PPF==============CP
    Method: IF_DETERMINATION_PPF~DETERMINE of program CL_RULE_DETERMINATION_PPF=====CP
    Method: DETERMINE of program CL_TTYPE_PPF==================CP
    Method: DETERMINE of program CL_CONTEXT_MANAGER_PPF========CP
    Method: DETERMINE of program CL_MANAGER_PPF================CP
    Method: SEND_SNL of program /SCMB/CL_SVDELIVERY===========CP
    Method: SAVE_SNL of program /SCMB/CL_SVDELIVERY===========CP
    Method: SAVE of program /SCA/CL_SVDELIVERY============CP
    Function: /SCA/BOL_RFC_DLV_CHANGE of program /SCA/SAPLBOL_DLV
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system <system number> in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server <server> in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server <server>. In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team 
    I've checked and reactivated all ODMs related to ASN, according to the SAP Note 1019289 (SNC5.1 Order Documents: Required Customizing).
    Could you please give me your opinion about this?
    Thank you very much in advance,
    Nicola
    Edited by: PTP Team Consultants on Nov 1, 2011 4:29 PM

    Hi Martin,
    Thank you for your answer.
    This is the error analysis in transaction ST22:
    Error analysis
        The following syntax error was found in the program
         /1BCPPF/CL_100SCABOL_DLV_X====CP :
        "The field "LV_EVAL_OUTCOME" is unknown, but there is a field with the "
        "similar name "RULE_EVALUATION_OUTCOME". "RULE_EVALUATION_OUTCOME"."
    Thank you,
    Nicola
    Edited by: PTP Team Consultants on Nov 3, 2011 12:32 PM

  • SC-Error when processing your request.

    Hi ,
    when click the Shop link in the SRm portal, it gives the below error message.
    Error when processing your request.
    The Error occured on the application server p1bfsp23_FSP_44
    There Termination TYPE was : ABORT_MESSAGE_STATE
    The ABAP  call stack was :
    Form:OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
    Form:EXTERNAL_SCREEN_DETERMINE of Program  SAPLBBP_SC_UI_ITS
    Module:EXTERNAL_SCREEN_DETERMINE of Program  SAPLBBP_SC_UI_ITS
    Please assist me on this.
    Thanks,
    Dev

    Hi Devaraj,
    Please provide the below information from the full dump (transaction st22):
    Runtime Errors
    Exception
    Short text
    Information on where terminated
    Active Calls/Events
    With this information it will be possible to have a better idea about what could be causing this dump.
    Best regards,
    Christian Zeuch

  • Error when processing

    Dear All,
    As the required configuration is done and R/3 and when i am trying to bring this application through SE80 BSP Application with HCM_Learning and execute, I am getting the following error in the Explorer Screen. Kindly request you to advice me on this. I have given the details of the error below.
    Error when processing your request
    What has happened?
    The URL http://r3devsuz.suzlon.com:8000/sap/bc/bsp/sap/HCM_LEARNING/traininghome.htm was not called due to an error.
    Note
    The following error text was processed in the system DEV : Exception condition "INITIAL_LEARNER" raised.
    The error occurred on the application server r3devsuz_DEV_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Function: LSOF_LEARNER_GET_ACTIVITIES of program SAPLLSO_FRONTEND
    Method: ONINITIALIZATION of program CLO267CI12QAAMONPBLHCNROVQJS5CP
    Method: %_ONINITIALIZATION of program CL_O267CI12QAAMONPBLHCNROVQJS5CP
    Method: DO_REQUEST of program CL_BSP_PAGE===================CP
    Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
    Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP

    Hi Ravi,
    Since your The termination type was: RABAX_STATE
    Goto the Tcode ST22 and check for the ABAP Dump analysis.
    Also the initial page for the BSP application "HCM_LEARNING" is "leso.htm".
    Did you activate the service? in the Tcode SICF.
    Hope this helps you.
    Regards,
    Subbu.

  • Error when processing Network

    Dear all.
    I create a sales order in tcode va01 and input a wbs element E-000009.1 in the field of WBS Element at Account assignment tab of one item detail.When save the sales order,sap pop up a message box with text "Sales order has no CO object".The detail message content was pasted at bottom.When confirm the first message box,sap pop up the second message box with text "Error when processing Network".The detail message content was pasted at bottom.
    So I need the experts give me some useful advice and reference to resolve the problem.
    Thank you.
    Regards
    Yoda
    Sales order has no CO object
    Message no. CO323
    Diagnosis
    The production order should be settled on the sales order.
    The requirements type of the sales order, however, refers to an account assignment category that does not allow settlement using the sales order (key consumption posting).
    Procedure
    1. Check which requirements type in entered in the relevant sales order item
    Display sales order
    2. Check the settings for this requirements type in Customizing
    (See Control sales order-related production).
    Error when processing Network
    Message no. V1380
    Diagnosis
    A technical error has occurred. On calling up the assembly interface, exception 2 was triggered. The exceptions have the following meanings:
    1 = External block
    2 = General error
    3 = Insufficient data for the interface
    4 = Order was not found
    5 = Update has been rejected
    6 = Final document number for Network is not issued
    Procedure
    Inform your system administrator.

    Dear shashank.
    Thanks for you reply.
    1.I have checked the sales order and the requ. type was KMNP.In tran OVZH the requ. type KMNP use the ReqCl 202.In tran OVZG I checked the ReqCl 202 and the "Acct.assig.cat." was Q and the Consumption was P.
    2.In tran cj20n I checked the wbs element.Its operative indicator was billing elements.
    3.In tran mm03 I try to found the field of "req type / strategy".But I could not this field.Could you tell me the "req type / strategy" field was in which view?
    Thank you so much.
    Regards
    Yoda

  • Errors when processing web service call

    Hello Experts,
    Based on a requirement, I got a URL based on WSDL, using which I created a Consumer Proxy in SAP.
    I created a Logical Port in SOA Manager with type selected as 'WSDL'.
    When I'm trying to execute the proxy class to call the webservice using the logical port through SE80  it is throwing an error log as stated below.
    1) SOAP:14 Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/
    2)Error when processing Web service call
    3)Error when calling SOAP Runtime functions: Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/
    Kindly help me out.
    Thanks,
    Vamshi

    Hi,
    Check Anton's reply in this thread: External WS Consumption Issue
    Also refer the below doc which may help you: Consume an External Web Service in a Nutshell with Good Old ABAP
    Calling WebServices from ABAP via HTTPS
    Regards,
    Kiran

  • Error When Processing Picking List Script.

    Hi Experts,
    I have created Script for Picking List,
    I am getting the below error when processing ...
    Error Info...   VN 073: Errors occurred while processing output
    Its working fine when Standard Script SD_PICK_SINGLE is used ..
    Pls Help.
    Regards

    Hi Raghu,
    Before processing your picking list form make sure you have created a output type for it and you have assigned your form name and program name to that output type. you can see this in TCODE: NACE
    Thanks,
    Pritesh

  • "Lightroom encountered and error when reading from its preview cache and needs to quit"

    I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains.
    Any Ideas here? Is there another app that may be telling it where to look for the cache and it no longer there? I was using a ramdisk for a bit but ditched it. Not sure if that has something to do with it but it seems suspect.
    Your thoughts?
    --Kenny Brandon Wilson

    Talked to Adobe support this morning, this is their response in case anyone else is looking for help. I'm running a Windows 7 box, LR 5.6.
      Gokul: Click on start and type %appdata%, then open roaming folder.
      Edward: ok
      Gokul: Open Adobe folder.
      Gokul: Open Lightroom folder.
      Gokul: Open Lightroom folder> Preferences.
      Edward: ok
      Gokul: Rename Lightroom 5 Preferences.agprefs file as Lightroom 5 Preferences.agprefsOLD.
      Edward: OK
      Gokul: Please check if you can launch Lightroom without any error.
      Edward: it shows me a welcome screen and is asking me to select my country
      Edward: aka, register the software
      Gokul: You can skip and launch it.
      Edward: LR catalog not found
      Gokul: Please select the catalog.
      Edward: my original catalog?
      Gokul: Yes.
      Edward: testing integrity of catalog
      Edward: loaded just fine
      Gokul: Okay.
      Gokul: Please check if you can re-launch it again.
      Edward: yes, it worked!
      Gokul: Excellent!
      Gokul: Since your preferences were corrupted you were facing issue so we renamed the preferences file to reset it.
      Edward: aha....ok
    All of my import/export presets were intact along with develop user presets. I'm happy as a clam for my $10/month!

  • LR encountered an error when reading from its preview cache and needs to quit.

    I have the 30 day trial version of Lightroom.  I was able to use it for one week, but the past 1.5-2 weeks, it has been locked up and giving this error message.  How do I resolve the problem?  And how do I reset the 30 day free trial?  I would like to have time using the product, before deciding on the annual contract.
    "LR encountered an error when reading from its preview cache and needs to quit.  Lightroom will attempt to fix this problem the next time it launches."
    Thank you.

    Delete the preview cache from the Lightroom folder in your Pictures folder if you used the default placement. It has the extension .lrdata.
    You cannot reset the trial period.

  • I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried

    I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???

    Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.

  • Error Launching LR 5: "Lightroom encountered an error when reading from its preview cache and..."

    Error Launching LR 5: "Lightroom encountered an error when reading from its preview cache and needs to quit.  Lightroom will attempt to fix this problem the next time it launches."
    I've tried renaming my catalog.lrcat file.  I've copied over my most recent backup of the catalog.lrcat and that didn't work either.

    On Mac:
    PS - to open the previews "folder" (a "package" is just a "special" folder) on Mac, ctrl-click and choose "Show package contents.." - same way you open any other special folder, like .app or .lrplugin..
    Rob

Maybe you are looking for