URL filtering using NBAR on the ASR1000 / 9000

I've been asked to provide Internet Watch Foundation filtering on a router facing off to an ISP. This is a list of 8-900 URLs which is updated daily. Could this be done using NBAR on the ASR1000 or 9000? Has anyone done anything like this before? I'm sort of thinking of some sort of TCL script to do the update.

not quite the same, but a question...
the asr9k does not currently support nbar, is it on a road map?    anyone know?
thanks in advance.
tricia

Similar Messages

  • When I "bookmark all tabs" into a bookmark folder, the webpage URLs are used rather than the wepage TITLES and for me this causes a problem.

    Using Firefox 34.0 on Ubuntu.
    To expand on my particular problem, I use this feature exclusively for going over many days of TV/radio demand services, opening all of them in different tabs, and then at the end 'bookmark all tabs', and store them in a bookmarks folder.
    The bookmarks are all displayed as URLs rather than webpage titles. Most of the TV/radio sites I look at have meaningless URLs (the titles are meaningful) so when I look in the folder I cannot quickly browse by bookmarks, I have to open every one individually to see what it is.
    THis is different behaviour when I individually bookmark single pages and store it on the bookmark toolbar or other folder. Then the webpage title is displayed, which is the desired behaviour.

    ''cor-el [[#answer-670559|said]]''
    <blockquote>
    I see the URL if I haven't visited the tab in the current session and the tab hasn't loaded yet.
    *browser.sessionstore.restore_on_demand
    *browser.sessionstore.restore_pinned_tabs_on_demand
    </blockquote>
    Hi and thanks for your reply. However, I get URLs instead of names even if I've visted the tabs and they've loaded.
    So no solution for me yet. But your reply has opened up the murky world of Mozilla preferences, and by searching (on google) for bookmark preferences I've found someone on Mozillazine forums with a similar issue to mine (I didn't notice this alternative source of help when I was registering for the standard mozilla support)
    [http://forums.mozillazine.org/viewtopic.php?f=38&t=2438357&sid=4cb515b6e7704181d49073403be55317]
    Unfortunately, this mozillazine thread doesn't end in a solution. I've done some brief and unadvised fiddling of preferences without success. I am just adding this info here in case anyone else has this issue and wants to experiment themselves. Perhaps I will repost my problem in Mozillazine explicitly.
    thanks again

  • URL Variables used to set the source property for the VIDEO COMP.

    Can you take a url variable and have that variable be the value for the source parameter of the video playback component in flash CS4 or CS5?
    Example:
    the url with url variable:   http://www.mydomain.com/videos/videoplayer.cfm?vplayer=videofile1
    the actionscript 3.0
    var videoFile:String = [who do I get the url variable's value here?]
    myVideoPlayer.source = videoFile +".mp4"
    in the end the file that should be playing in the video player is:   videofile1.mp4
    Thanks.

    Either
    A) Using ExternalInterface, call a Javascript function that returns window.location.search
    B) Use Javascript to create FlashVars from window.location.search

  • Show values of filters used in the columns

    hi experts
    Probably it is very simple but I don´t find how to do it. I would like to see in the query the values of the filters used to calculate the columns.
    I.e. One column is the amount of the net income for one month. The month is asked when I execute the query but when the query is executed I don´t see in the screen the month used.
    Thanks and regards

    Luis,
    I think you are wanting to use text variables on the columns to get the values of the month. To do this go into the column name and type &. It will prompt you to select, create, or edit a text variable. You can create a variable here to display the value of the characteristic your variable is on (i.e Month).
    Hope this helps,
    Rusty

  • Schedule web url filtering in isa550

    Hello,
    This is my first experience using isa550 security appliance.  i would like to schedule the web url filters: in example accept or deny some websites or url categories on certains hours, or days.
    i see that the schedules can be applied on firewall rules, but i can't see how to apply theses schedules on web url filtering. when i link the web url policy to zones i don't see anything about shedules .
    can you help please ?

    I can confirm what you are seeing. There are schedules on the Application Control, for example, but not the web filter. One possible consideration with this is though you may want to allow some websites during certain times (Facebook over lunch hours for example) there would probably be blocked websites you would want to allow ever (child porn for example) ever. Since only one policy can be applied per Zone, until multiple policies can be applied to a Zone, you probably wouldn't want to turn off ALL web filtering for a Zone ever.
    I'd recommend trying to leverage Application Control instead. You can apply multiple policies to a Zone so you could create a policy that includes everything that is blocked always and another that has content you'll allow during a schedule. The apply both policies to the same Zone and ensure your schedule policy is above your always block policy so that if there's ever a conflict the schedule policy would apply first and allow the traffic during allowed times. That's unless your internal security policies dictate otherwise.
    Sent from Cisco Technical Support iPhone App

  • IOS Content Filtering Using TrendMicro: Can I customize the block-page redirect-url?

    I have IOS content filtering using the Trend Micro subscription service working on a 2911 running 15.1.(3)T3 with the security license option and a 30 day demo Trend subscription.
    Once I figured out that the content filtering for Trend appears to be completely broken in 15.2 (even using docs for 15.2) I went back to 15.1 and it works great.
    Everything seems great so far except I would like to have a more 'fancy' or custom blocked page where a user can have a couple links to either go to the trend micro reporting page http://global.sitesafety.trendmicro.com/result.php or some other page, and maybe some branding so they know the page is coming from our network and is not some fake security thing or phishing attempt or whatever.
    I know I can use the 'parameter-map type urlfpolicy trend ' section to do a tiny bit of customization of the text that appears on the default blocked page display and there is an option for it to go to a simple redirect instead ('block-page redirect-url') but I wonder if anyone has any ideas on how to do more with either the built in page or the redirect-url to keep the information of what page the user was trying to access and why it was blocked (category etc.) while adding more features.
    Thanks!
    Oh, one last thing, this doesn't support any kind of 'user override' or anything like that does it? So that a network can have a filter applied but an admin could override the filtering to allow temporary access to something?

    Hmm... no thoughts over the weekend. Anyone?

  • How to open an URL and close the URL window, using adobe javascript

    Hi,
      Is it possible to open an URL and close the URL back again(without allowing the user to perform any other operation)? I was able to acheive the opening of the URL, using the app.launchURL("address". true); - But here it lauches in new window, and how do i close the window using the javascript. Is it possible?
    Thanks.

    Hi all
    In addition to what Bobby W - Adobe TS added, you might find
    the following useful as a bypass or workaround to the pesky prompt.
    var pw=window.parent;pw.opener=window.self;window.open("
    http://www.adobe.com");
    pw.close();
    I think this will only work for IE browsers. Actually, I
    think the whole window.close() only works for IE, but could be
    wrong about that.
    Cheers... Rick

  • How do I find out EXACTLY what URL/URI a plugin is using and what the format is?

    I just want the above info to help me debug a rather complex problem, details of which below.
    I cant work out how to make BBC iPlayer (which i think is based on Adobe Flash) drive my sound card, which requires ASIO to work bit-perfect.
    NB I really need it to work on my XP Pro sp3 machine connected to my hifi so a windows 7 only solution is not ideal, though I would upgrade if it's the only way.
    many thanks
    John

    Probably off topic but:
    BBC iPlayer uses FlashPlayer for live video streams and Radio streams. It also has options for Windows Media downloads and playback of video, and has options for some mp3 radio downloads and Windows streams of radio are also available.
    Your location bar will show the url being used
    If you use iPlayer Desktop that uses flash and Adobe Air.
    Note there is a BBC [http://www.bbc.co.uk/dna/mbiplayer/ messageboard ]
    and a [http://iplayerhelp.external.bbc.co.uk/help/ help & faq] section with some url s [http://faq.external.bbc.co.uk/questions/radio/online_radiohowto here]

  • HTTP adapter question - how to tell what URL was used in the runtime

    I need to know the URL information used when sending via HTTP adapter. I cannot find this information in the SXMB_MONI trace under SOAP header or in any other place.
    THanks,
    Pam

    Never mind....I found the log in ICM monitor

  • My bookmarks suddenly are not accessible. Each time I try to use a bookmark, the following message comes up on the error page: The requested URL /exec/obidos/subst/home/home.html/103-3592028-6560639 was not found on this server. The page error is ident

    My bookmarks suddenly are not accessible. Each time I try to use a bookmark, the following message comes up on the error page: The requested URL /exec/obidos/subst/home/home.html/103-3592028-6560639 was not found on this server. The page error is identified as "ERROR 404" I tried a clean install of the latest version; no luck. looked at plug-ins & add-ons; no luck
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Hi Mac Attack,
    My computer will not disconnect from the internet.  It seems to find a clone router and continues even when I shut down and unplug my my own home iy
    Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
    If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
    Have a look at your settings in Safari > Preferences. Especially General and Privacy.
    Reset Safari to remove cookies and other stored data.
    System Preferences > General
    Have a look at your settings in System Preferences >  Security & Privacy.
    Call back with more questions.
    Regards,
    Ian

  • Obtaining the URL used to open the PDF

    Hi,
    My Acrobat PDF is to be opened within the browser using a URL that will differ with each testing region.
    How do I obtain the URL that was used to open the PDF within the PDF javascript code?
    Thanks for your help.

    Look at the documentation for that method: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.443.html
    You'll see that there are security restrictions, so it normally cannot work if the code is inside the document. It also won't work for a dynamic XFA form, but might for a static form if you can get it to execute in a privileged context (e.g., folder-level code).
    This also isn't something that you'd normally want to do at run-time. Can you explain why you want to do this? There might be other approaches that would be more appropriate for an XFA form, so consider posting this in the LiveCycle Designer forum as TSN urged.

  • Filtering a Report on the active record of another Report on the same page

    Hello,
    I have a Form and Report on the same page in an APEX app. The interactive report is used for sorting/filtering etc. and the Form is used to present the data for one record at a time, as well as allow updates in selected fields. This was done using the wizards, the little 'edit' button is clicked to change the form to the selected record.
    I also have (or want to have) a second non-interactive report on the page, which displays some records based on the record of the main report that is currently selected and appearing in the form.
    I tried doing a simple 'SELECT fields WHERE link field is equal to main report', but it always says no data found.
    Basically, I need to be able to have a query for the second report that says 'SELECT these fields WHERE the site is equal to the site currently being displayed in the form'.
    When the little pencil/paper 'edit' button is clicked on a report, does this set some ActiveRow or something like this that I can use to filter the second report?
    As you can tell from this post, I am in my database skill infancy, and any literature/pointers on how to achieve this (outside of MS ACCESS...) would be appreciated.

    Okay, I have somewhat got my head around Column Links, and have put the key link field into the URL:
    The value is P4_MDF, and in this URL example it has taken the value of 'WLAH01'
    f?p=880:4:3924084145794812::NO::P4_MDF,P4_ESA_CODE,P4_SITE_NAME:WLAH01%2CWLAH%2CWYRALLAH
    Now I just need to work out how to use this value in the URL to filter the classic report.
    I have used this query:
    SELECT *
    FROM
    "MACHINE_INFO"
    WHERE CCP = :P4_MDF
    As CCP in the report im trying to filter is the same as MDF in the IR that I am clicking the Column Link
    This is the Debug for the 2nd 'filtered' report (which filters everything)
    0.09: show report
    0.09: determine column headings
    0.09: parse query as: EXPAT
    0.09: binding: ":P4_MDF"="P4_MDF" value="WLAH01"
    0.09: print column headings
    0.09: rows loop: 15 row(s)
    I'm slowly getting the hang of this, any assistance would be great!

  • URL filtering replacing with web usage control

    I come to know the URL filtering in ironport is replacing with the advanced web usage control. May i know from which version its introducing? Any upgradation procedure?
    What are the changes will take place after the upgradation & what kind of functionality will be available with Web Usage Control.
    Please clarify in detail.
    Thanks in advance
    Siva

    I don't remember when the web Usage controls was introduced... I'm going to guess 7.0?
    To upgrade your box to the the current version, click on System Administration>System Upgrade.  Click on the Available Upgrades and see what's available for your hardware.  If nothing is there, contact your reseller.
    Review the release notes for the version you want to upgrade to.  http://www.cisco.com/en/US/products/ps10164/prod_release_notes_list.html
    Select the version you want, check the box to save the config, you can also have it email you the config.  Make sure to uncheck the "Mask passwords..." so that if you have to reload this config on something, it works properly.
    There are a huge number of changes in how web usage control works, and the visibility it gives you into what apps users are using and how those applications work.  Far to many to go into here.  Look at this document:
    Chapter 18. http://www.cisco.com/en/US/docs/security/wsa/wsa7.5/user_guide/WSA_7.5.0_UserGuide.pdfhttp://www.cisco.com/en/US/docs/security/wsa/wsa7.1/user_guide/Cisco_IronPort_AsyncOS_7.1.0_User_Guide_for_Web_Security_Appliances.pdf

  • How can I achieve IOS content filtering using a Cisco router

    Good day Everybody.
    I would like to set up content filtering using IOS on my Cisco router. I already know how to do URL filtering but I want to restrict access to sites based on categories.
    Is this possible without having to introduce an external device?

    Natively in IOS this is not possible. However you can configure CWS (Cisco Web Security). The router will forward web requests to a cloud based web security service.
    http://www.cisco.com/en/US/prod/collateral/vpndevc/ps10142/ps11720/data_sheet_c78-729637.html

  • Url filtering Route policy Firewall ?

    Hello,
    I'd like to know if it's possible to make a route policy (based on an identity matched by url white list) that redirect http trafic to a firewall (Juniper SSG550M).
    The objectif is to separate traffic depending on url request as professionnal and non professionnal traffic, but Juniper can't be used as Upstream Proxy because it can't be use as a proxy. So, is it possible to create 2 "Direct connection" routing policies and specify 2 différents gateway ?
    Or, if you have any other idea to separate traffic depending on url, I take it !
    Regards,
    Romain.

    Hi Stella
    AFAIK you can do URL filtering provided that you have a websense server installed at your site.
    do refer this link for more info on the same..
    http://www.cisco.com/en/US/partner/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a008008d1f7.html
    regds

Maybe you are looking for