Url for Report

I do all the development including custom SSRS reports on a development machine. In my reports I define the URL and credentials. The problem I am having is that each time I want to deploy my solution to the production environment I have to go to each report,
adjust the URL and credentials for the data source and then upload the rdl file with that change. There must be a better way to do this. Any advice is appreciated.

Hi,
Create SSRS deployment project for this. Here is the link for how to create one.
https://msdn.microsoft.com/en-au/library/ms159615.aspx
Hope this helps.
Minal Dahiya
blog : http://minaldahiya.blogspot.com.au/
If this post answers your question, please click "Mark As Answer" on the post and "Vote as Helpful"

Similar Messages

URL for reporting BUGS in iWeb. URL for reporting a WISH LIST for next iWeb

1
Can someone please send the URL for the page in which one can report bugs in iWeb?
2
Same thing for simple old Wishes and Hopes for the next iWeb if they are not one and the same URL/page.
Thank you.
Lorna in Southern California

Lorna....
All is well....actually doing a little jet-setting
over here and there...you can check the updates on my
website....thanks for your email...
Regarding the feedback to Apple....if you ever forget
the website, you can always look under the iWeb menu
while you are working (that's when you run into these
bugs anyways) and pick "Send Feedback to Apple".
That'll send you to the same webpage for feedback
submission!
Hi James I'm glad that you are ok. And thank you for the hint about the bug reports on iWeb menu. It makes a lot of sense putting it there; I just never noticed it.
iWeb has a bad blog bug
I'd like to stomp it royally
Instead I'll send a feedback hug
(She said, behaving loyally.)
All is said and all is done
Let's get the Raid bomb just for fun.

How to create a URL for report ?

Hello,
I have created a report for which my requirement in i have to create a URL for that report so that i can excecute where ever i want.
Thks

Hello,
My client is asking like to create a URL for customized reports so that he can check his company sales where ever he want.
Can we create a URL for our reports if yes please help me to achieve this.
Points will be rewared without fail for helpful answers.
Thks

Cannot Set URL For Report Server SSL Binding In SSRS 2008R2

Hi,
I have an SSL certificate that has a number of subject alternate names and I need the SSL binding for the report server and the report manager to be against one of these names, not the certificate name.
However, while it is possible to set the host header for a non-SSL identity and therefore control the URL reserved, it does not seem possible to set this for an SSL identity - the edit dialogue box simply generates the URL when you choose the certificate
from the dropdown box.
How do I set the URL for a report server SSL binding?
Cheers
Dan

Hi Charlie,
You are correct, i am configuring SSL connections on a native mode report server and i want to configure a custom URL for it.
However, my issue is not that I cannot see the certficate - it is that I cannot set a custom URL for SSL connections. Apologies, I should have written up an example of what I am seeing:-
I have installed a certificate for a.company.com. It shows up fine in the certificate list/dropdown for configuring the web service URL SSL certificate.
I can set a host header for non-SSL traffic for a.company.com and the binding succeeds. I can also set an SSL identity in the same Advanced Multiple Web Site Configuration window for a.company.com and this also binds correctly.
However, the certficate is like a wildcard in that it supports 4 more URLs in its subject alternate name property. I would like to set an SSL identity for b.company.com which is one of those entries.
As an aside, the certificate is also installed in IIS and succeeds in binding to b.company.com. I mention this as it shows that the certificate appears to be installed correctly and is working in its wildcard-like capacity.
I can also successfully set a host header for b.company.com for the report server for non-SSL traffic. It is b.company.com that I would like to host the report server and manager under.
The issue I have is that if I try to add an SSL identity for the report server web service for b.company.com using the Advanced Multiple Web Site Configuration window, there is no editable box for URL and so it does not allow me to set the URL/host
header - it therefore always binds to a.company.com.
I have scoured the boards for answers and there have been a couple of mentions, but neither has worked for me.
This one talks about adding the required
https://b.company.com/reportserver to the rsreportserver.config file and the OP describes the issue pretty much exactly as I am experiencing plus the responder talks about this guidance as coming from MS support - however when I followed the steps the result
is the same as without the configuration:-
http://www.sql-server-performance.com/forum/threads/ssrs-2008-host-headers-and-ssl.28571/
Another suggestion (for which I have lost the link) was to amend the URL config in that file directly and add the required entry. Both posters claim it has worked for them so I am sure that using a wildcard certificate with SSRS does work! I think in my
case I am missing some extra steps as it is fine to amend the config file directly, but I don't think this actually kicks off the SSL/URL binding process which is what the dialogue window does.
Hope this helps in explaining further. I am sure this is resolvable as I cannot believe the only option for SSRS is to bind to a single domain name and ignore the other wildcard/alternate options.
Cheers
Dan

Opening URL for report in a new window

I have a report with URLs to other reports, and also to dialogs in Dynamics CRM. The URLs all work perfectly, however, I want to open the reports the URLs point to (and the CRM dialogs) in a new window. I tried adding &rc:LinkTarget=_blank to the
end of the URL, but that causes an Invalid Parameter error:
>System.InvalidOperationException: Microsoft Dynamics CRM has experienced an error. Reference number for administrators or support: #969F3622: System.InvalidOperationException: CRM Parameter Filter - Invalid parameter 'rc:LinkTarget=_blank' in Request.QueryString
on page /Company/cs/dialog/rundialog.aspx
>The raw request was 'GET /Company/cs/dialog/rundialog.aspx?DialogId=%7bc4918a58-6faa-4915-8620-1ebfb1980263%7d&EntityName=phonecall&ObjectId=%7bC51D5ECC-DF43-E411-BC10-00155D3FE201%7d&rc:LinkTarget=_blank' called from
http://vulcanbasevm/Reports/Reserved.ReportViewerWebControl.axd?ReportSession=bzys1s55lpwiai55sny1borg&ControlID=e5c10494dc3048b199babe9e2aabd82a&Culture=6153&UICulture=9&ReportStack=1&OpType=ReportArea&Controller=ctl143&PageNumber=1&ZoomMode=Percent&ZoomPct=100&ReloadDocMap=true&SearchStartPage=0&PageCountMode=Estimate&LinkTarget=_top.
>   at Microsoft.Crm.Application.ParameterFilter.ValidateParameter(HttpRequest request, ArrayList parameterCollection, String key, String value, ParameterSources source, EntityType pageEntityType, FormAdditionalAllowedParameters additionalAllowedParameters)
>   at Microsoft.Crm.Application.ParameterFilter.ValidateParameters(Page page, EntityType pageEntityType, Boolean alwaysEnableParameterChecking, FormAdditionalAllowedParameters formAdditionalAllowedParametersTemp)
>   at Microsoft.Crm.Application.ParameterFilter.ValidateParameters(Page page, EntityType pageEntityType, FormAdditionalAllowedParameters formAdditionalAllowedParametersTemp)
>   at Microsoft.Crm.Application.Controls.AppPage.ValidatePageParameters()
>   at Microsoft.Crm.Application.Controls.AppPage.OnInit(EventArgs e)
>   at System.Web.UI.Control.InitRecursive(Control namingContainer)
>   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

Hi ,
You can try with below ;
="javascript:void(window.open('http://www.google.ca','_blank'))"
I use google url you can type your URL.
you can take help from below link;
http://www.bidn.com/blogs/BrianKnight/ssis/972/ssrs-action-to-open-a-url-in-a-new-window
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem.

Get host and port to construct url for report call [SOLVED]

I'm calling reports via web.show_document and want to dynamically construct the URL based upon where the form is running.
I have sys_context('USERENV', 'HOST') for the host part.
How can I get the port?
Edited by: New Rodeo on Sep 19, 2008 12:32 PM

Storing the reports url in a db-table works for configurations with one ias, but in applications which are spread other more than one ias, all accessing the same db you may come into rouble.
We created a new entry in the [APPLICATION].env like REPORTSSERVER_URL=http://myhost:myport/reports/rwservlet?server=XYZ and then
read this in forms at runtime usinf TOOL_ENV-builtins.
hope this helps

Download URL for Reports 9i

I would like to download oracle reports builder 9i version. I have to fix production issue which has developed in the older version of reports. The latest version has following compatible issues.
REP-302: Opening a report saved with a newer version of Report Builder.
Functionality may be lost.
I would like to know where to download the free version of reports builder version 9i. Could you please send me the URL ?
Regards,
cmohan

Please see these links.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Reports+AND+9i&objID=f36&dateRange=all&userID=&numResults=15&rankBy=10001
https://edelivery.oracle.com/
If you could not find the file then you will have to log a SR and ask Oracle Support to send you the Media Pack.
Thanks,
Hussein

SmartView connection for reporting and analysis

Anyone else using version 11.1.2? We have installed SmartView and there is not an option to change service provider so that we can connect to reporting and analysis. We have successfully connected to the HFM office provider, however when entering the listxml URL for reporting and analysis like we entered the HFMofficeprovider it cannot connect. Oracle has advised us there is supposed to be the ability to add a service and we are missing that. They have advised that we run the EPM configuraton again, however we dont think that will help since we have run this a few times already. We are waiting feedback but just reaching out if anyone else has or had this issue
Edited by: jshoe on Jun 17, 2010 1:35 PM

With 11.1.2, Smart View uses Workspace to keep track of the Shared Connection providers (including R&A). It should show up as "RAFramework - 11.1.2 - Reporting and Analysis Framework".
R&A registers with workspace when it is configured. In order for workspace to pick up this regsitration, you have to re-run the configuration for the Foundation tasks of "Configure Logical Address for Web Applications", "Configure Oracle Configuration Manager" and "Configure Web Server".
I would then re-boot the server for the changes to take affect.

Xcelsius for Reporting Services URL

Hi,
I am trying to use sql server reporting services in my Xcelsius project. Configured Xcelsius Gateway Service on the SQL server. Created Data source and report. After this, I was trying to connect to the gateway from xcelsius designer. For this i added a reporting service button. In the button's properties, it asks for 'Xcelsius for Reporting Services URL'. Which URL should be specified here?
Thanks and Regards,
Shyam.

The URL is
u201Chttp://servername/xrs/xrs.asmx/GetReportsu201D
But make sure to test the installation, if its working or not. To test it just open a web browser and type the above url.

How to to display the JSP report in Application Server ? URL for displaying

Hi Experts,
Last week, we tried to change the memory of Response Cache and buffer Cache to increase the speed of the Excel report. But it didn’t work out.
And from the below link, I understood we can convert the oracle 9i report to excel by converting the Oracle 9i report to JSP report.
http://www.oracle.com/technology/products/reports/htdocs/getstart/demonstrations/index.html
I’ve converted the Oracle 9i report to JSP report and finding the way to display the JSP report using Application Server. I am trying to find out the REPORT URL of simple JSP report and using Reports Servlet . Right now I am trying to display the JSP report in Application Server.
Please suggest the URL for displaying the JSP report
Thanks & Regards

Hi,
You can directly call you .jsp file, http://<host>:<domain>:<port>/<jsp report path>?userid=<if your report requires userid>/<pwd>
Refer to metalink documents:
Frequently Asked Questions About JSP Reports [ID 301714.1]
Here --> Question 4. How do I execute a JSP report?
Also refer, How to deploy JSP reports [ID 220943.1]
Hope this helps.
Regards,
Mithun

BI Publisher 10.1.4.3 - To connect to AD for report generation

Hi,
I need to generate a report against an LDAP(Active directory) . I'm using BIP 10.1.4.3. When i try to configure a datasource, the options present are
1. JDBC
2.JNDI
3. File
3.OLAP.
Can any one guide on how to connect to Active Directory in BI Publisher for report generation.
Thanks in Advance.

You have posted your question in the Oracle Portal forum. Please submit your question in the [url https://forums.oracle.com/forums/forum.jspa?forumID=47]Identity Management forum.
Thanks,
EJ

Radio group with URL for image in a table

I'm trying to display some text and an image for a radio group so the form looks like
(*) text for item 1 {image for item 1}
( ) text for item 2 {image for item 2}
( ) text for item 3 {image for item 3}
I've found these:
Re: Is it possible to display an image instead of button in a radio group?
How to show image in radio group ?
It looks like all I have to do is create a LOV that looks like:
SELECT {complex stuff that generates the text string, img tag, and URL for image}
,DB_PK
FROM dynamic_view_for_lov -- public synonym
But, my images are stored in a table.
I have been able to create an IR using the "Column Format=BLOB" method.
The SQL for the report looks like:
select
db_pk, display_text, image_len, image_clob
from dynamic_view_for_lov -- public synonym
And the Number/Date Format for the IMAGE_LEN column is:
IMAGE:DYNAMIC_VIEW_FOR_LOV:IMAGE_BLOB:DB_PK::::::Inline:Download
My question: How do I create the URL for the img tag for the LOV?
many thanks
MK

MikeKutz wrote:
I think Homer Simpson said it best: Doh!
For the person in the future, you have to 'fake create' the Automated Row Fetch process.
The get_blob_file_src gets all the information from that Process and the column name of the Item Type that is on the same page.
I forgot where I read about that trick.
Basically, you create the Automated Row Fetch process, then 'disable' it.
Same thing with the required Item Type. Create it as a "File Type", just to tell APEX that it comes from a Database Column,.... then change it to a 'hidden' type.
You don't have to "fake' it if the application already contains the file upload item and ARF. The assumption is that the application will contain these components in order to maintain the BLOBs and you'll just reference the functional ones.

How To Pass Multiple Parameters In URL with Report Builder

Hi,
I use apex 4.2 with database xe 11g and i use report builder to build my report i use this link to call report
function runrep(){
var vurl = 'http://192.168.0.57:8889/reports/rwservlet?userid=retail/1@xe&destype=cache&desformat=PDF&paramform=no&report=item_cost&P_BATCH_NO='+$v('P138_BATCH_NO');
popupURL(vurl);
now i want to pass Multiple Parameters like P138_ITEM_CODE , P138_UOM_CODE
how can i add this Parameters in URL ?
Regards
Ahmed

Ramani_vadakadu wrote:
window.open("http://hq-orapp-03.kuf.com:9704/xmlpserver/~weblogic/kufpec/BTA/KUF_CONF_ITINUD.xdo?_xpf=&_xpt=1&_xdo=%2F~weblogic%2Fkuf%2FBTA%2FKUF_CONF_ITINUD.xdo&_xmode=&_paramsP_BTM_ID="+parseInt(document.getElementById('P3_BTA_ID').value)+"&_xt=KUF_CONF_ITINUD&_xf=pdf&_xautorun=true&id=weblogic&passwd=kuf2011","_blank");
the above code we are using apex JS to BI publisher calling for report as PDF
i don't know exactly where your parameters , did you customize my link to multiple parameters
'http://192.168.0.57:8889/reports/rwservlet?userid=retail/1@xe&destype=cache&desformat=PDF&paramform=no&report=item_cost&P_BATCH_NO='+$v('P138_BATCH_NO');

URL for Central Adapter Engine

Hi,
It seems like our XI Server is unable to locate the Central adapter engine for doing an outbound RFC call. I am trying to call an RFC using the RFC adapter, and getting the following error:
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.nw4.netweaver</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.nw4.netweaver</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.nw4.netweaver</SAP:Stack>
Where do we maintain the URL of the adapter engine ?
thanks,
Manish

I have the same problem since we changed the name of the database server - the server name reported in the error is the old name. I've checked all the properties in this thread, plus follwed through OSS note 764176 with no luck. All the properties reflect the new name, but testing the proxy (SPROXY) still fails with the error:
<CODE>INTERNAL.AE_DETAILS_GET_ERROR</CODE>
<ERRORTEXT>Error when reading the access data (URL, user, password) for the Adapter Engine af.xix.sapsbxcrmdb2</ERRORTEXT>
sapsbxcrmdb2 is the old database server name.
I found one location where this is displayed - in transaction SXI_CACHE (in the client of th integration server), Menu option GOTO -> Adapter Engine Cache. The column 'Adapter Engine Name' reflects the incorrect name. Where is this property stored?
I cleared this entry manually by selecting the row and clicking on the trash can icon. Later it was refreshed properly.
-Mike
Update: I found that the SOAP Reciever channel in my Integration Scenario had a hard-coded entry pointing to the old integration server name in the property 'Adapter Engine'. I changed this by selecting the 'Integration Server' in the drop down. This changed the error behavior (still doesn't work, but the above errors went away).
-Mike
Message was edited by: Mike Hatch
Message was edited by: Mike Hatch
Message was edited by: Mike Hatch

SCCM Client Report Tool not opening up correct URL to Report Server

I recently install the SCCM 2012 right click tools and within the downloaded zip file there is SCCMClientToolsSetup2012.exe which adds a whole bunch of additional features when right clicking devices in the console. The problem is no matter what I put as
the Report Server while doing the install, it never opens the reports for the device... It gives me the following error:
Server Error in '/ReportServer' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it
is spelled correctly.
Requested URL: /ReportServer/Pages/ReportViewer.aspx
I have changed the report server virtual directory to match ReportServer from the default, but it still does not open the reports... Any idea what could I might be wrong?
I have the console and right click tools installed on my Windows 7 workstation. the Server is Windows 2012 Datacenter with SQL 2012 and SCCM 2012 R2.
Thanks!
Tony

Yes, it appears to work directly from the console and via web... But it does show Report.aspx vs. ReportViewer.aspx.
Hi,
Did you open reports from Web Service URL in Reporting Services Configuration Manager?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Url for Report

Similar Messages

Maybe you are looking for