Url for the geocoder

Hello friends I'm learning how to use the oracle maps, now I'm studyng the "gant_chart_pivot_table.htm"
of the oracle examples to jdeveloper 11g this is the url http://www.oracle.com/technology/obe/obe11jdev/11/dvt/gant_chart_pivot_table.htm#tv
but the url for the geocoder is lost , Who knows the new url for the geocoder?
the url of the tutorial is http://elocation.oracle.com/geocoder/gcserver , but not the aplication cannot connect to this url.
thanks
salu2 from Ecuador

Welcome to Apple Discussions!
I don't know the direct URL for it, however, http://www.apple.com/swupdates/ usually posts the same updates sometimes at the same time, or just a little later than the Software Update themselves. I prefer using the website, as then it is easier to read the details of the update and get a chance to bookmark it for later downloading elsewhere.

Similar Messages

Database does not contain a URL for the file

How do I find out what file/update this is:
The file digest/hash does not exist in the SUSDB, but I have no idea looking at the windowsupdate or softwaredistribution.log what file it is referring to.
SELECT [FileDigest]
      ,[DigestAlgorithm]
      ,[AdditionalHash]
FROM [SUSDB].[dbo].[tbFileHash] fh
WHERE fh.FileDigest =0x15B82F101E79C1E2181E43CC8A3CC137CBFDC91D
or fh.AdditionalHash =0x15B82F101E79C1E2181E43CC8A3CC137CBFDC91D
0 rows found
Softwaredistribution.log
2014-10-07 23:07:04.319 UTC   Error   w3wp.5   ClientImplementation.GetExtendedUpdateInfo   System.ArgumentException: The database does not contain a URL for the file 15B82F101E79C1E2181E43CC8A3CC137CBFDC91D.
Parameter name: fileDigests
   at Microsoft.UpdateServices.Internal.DataAccess.ExecuteSpGetFileLocations(Byte[][] fileDigests)
   at Microsoft.UpdateServices.Internal.DataAccessCache.GetFileLocations(Byte[][] fileDigests, DataAccess da)
   at Microsoft.UpdateServices.Internal.ClientImplementation.GetExtendedUpdateInfo(Cookie cookie, Int32[] revisionIds, XmlUpdateFragmentType[] fragmentTypes, String[] locales)
   at Microsoft.UpdateServices.Internal.ClientImplementation.GetExtendedUpdateInfo(Cookie cookie, Int32[] revisionIds, XmlUpdateFragmentType[] fragmentTypes, String[] locales)
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
   at System.Web.Services.Protocols.WebServiceHandler.Invoke()
   at System.Web.Services.Protocols.WebServiceHandler.CoreProcessRequest()
   at System.Web.Services.Protocols.SyncSessionlessHandler.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
   at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
   at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
   at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)

How do I find out what file/update this is:
Hows about.. rather than chasing a rabbit down the hole doing whatever you think you're doing...
We start with this: What problem is it that you're actually trying to solve?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Configuring the Destination URL for the Adobe Document Services

hi all,
I am going through the documentation for "Configuring the Destination URL for the Adobe Document Services " at :
http://help.sap.com/saphelp_nw2004s/helpdata/en/02/560f41ca73d349e10000000a1550b0/frameset.htm
I am not able to understand 7th step
7. Define the user name and password. To find out how to create the user name and password for the Adobe document services, see Creating a User for Basic Authentication in the document Adobe Document Services Configuration Guide. You can find this guide in the SAP Service Marketplace under Quick Link /InstguidesNW04.
In our scenario
We are running NW04s SP11 on 2 machines
1) 32-bit machine with ADS and credentials properly configured on Web AS for Java installation
com.adobe AdobeDocumentServices null (710.20061024154505.342190)
com.adobe AdobeDocumentServicesEjbClientLibrary null (705.20060407121920.289077)
sap.com SAP-JEE 7.00 SP11 (1000.7.00.11.0.20070201154700)
sap.com SAP-JEECOR 7.00 SP11 (1000.7.00.11.0.20070201154700)
com.adobe DocumentServicesBinaries2 null (710.20060629085312.115621)
com.adobe DocumentServicesConfiguration null (710.20061024154505.342190)
com.adobe DocumentServicesDestProtoService null (710.20060821084105.325745)
com.adobe DocumentServicesLibrary null (710.20060629090137.115621)
com.adobe DocumentServicesLicenseDatabase null (705.20051005114147.242570)
com.adobe DocumentServicesLicenseManager null (710.20060929113452.336248)
com.adobe DocumentServicesLicenseService null (710.20060929113452.336248)
com.adobe DocumentServicesLicenseSupportService null (710.20060929113641.336248)

2) 64-bit machine with portal installation on Web AS for Java, with ESS and MSS
sap.com/SAP-JEECOR 7.00 SP11 (1000.7.00.11.0.20070201154700) 20070308153304
sap.com/SAP-JEE 7.00 SP11 (1000.7.00.11.0.20070201154700) 20070308153213
sap.com SAP_ESS 600 SP7 (1000.600.0.7.12.20070314050106)
sap.com SAP_MSS 600 SP7 (1000.600.0.7.4.20070321052655)
sap.com tc/wd/webdynpro null (7.0009.20060804145649.0000) 

Why do we have to create a new user for the server which is consuming the web service? We already have an user "ADSUser" defined for the Web AS server which has ADS services deployed.
I have opened this thread to solve the previous unanswered question I posted on SDN Empty area in place of Interactive form. .
One more thing the adobe print forms of ESS [Total Compensation Statement and Salary Statement] are rendering properly, only the ones with Interactive ability or not.
thanks,
Sanketh

Hello Sanketh,
1. To access the NW04s configuration guide,
 - Go to https://service.sap.com/adobe
 - On the left frame (tree), under Adobe > Media Library > Documentation
 - On the right had pane you will find the link to the NW04s Configuration guide
2. The link that you have mentioned below details the steps required to be carried out on the client machine that consumes the Adobe Document Services. In our case that is the j2ee engine on which your Web Dynpro application is running. It could be the same physical machine with two different j2ee instances hosting Web Dynpro and ADS or it could be two different physical machine or a single machine having a single instance of j2ee engine hosting both the Web Dynpro and the ADS.
You do not have to create a separate username and a password on the consuming machine but you need to configure the Web Service client proxy to point to the ADS (maybe hosted on a different machine) with the username and the password created on the ADS server. As you have mentioned, you have already created such an user on the ADS (ADSUser). This user authentication on the client machine (consuming server - Web Dynpro) would be required at the runtime by the j2ee engine to authenticate itself with the ADS.
Best Regards,
Krish

Reg: URL for the document

HI,
Iam working on EASYDMS.
I want to send an email thru workflow when ever a doc is created in in EASYDMS .The content of the mail should contain the URL link
so that when ever user click the URL the doc should open so that he can approve the doc ??
Can anybody help me with this req??
how to get the URL for the document which is being created??

hi,
thx .
I already implememnted the note and I got THE CONTEXT MENU send url/copy url .
so i cal slect the doc and right clcik onit and select the SEND URL....so tha it gives url .
BUT my req is : whenever a doc is created my wrokflow starts from BADI......here inthis BADI...itself I want to find the URL foe the document which is being created now.??
any idea??
AS PER THE NOTE WE GET THE URL.....once the doc is created and we slect the doc and right click and select the SEND URL....so tha it gives url

Return url for the current page

Hi,
I would like to know how to return the url for the current page?

These are my preferred choices:
request.getRequestURI() will give you the relative path from root. For example:
/mypages/thepageIamon.jsp
request.getRequestURL().toString() will give you the full path. For example:
http://www.mysite.com/mypages/thepageIamon.jsp
Hope this helps.

While listening to a podcast on my iPhone I can e-mail the podcast ID. The email contains the url for the specific podcast. So you would assume that you could put that url into iTunes and it would take you to the podcast. This used to work but no longer.

While listening to a podcast on my iPhone I can e-mail the podcast ID to share it with someone else. The email contains the url for the specific podcast. So you would assume that you could put that url into iTunes and it would take you to the podcast. This used to work but no longer. Months ago when I would e-mail myself the url all I had to do was click on the link in the e-mail and it took me right to the specific podcast in iTunes. Now it only opens iTunes and I can't figure out how to find the specific one. What good is the e-mail tab on the iPhone if it doesn't connect you to the podcast you sent?

Same here. I just posted a question too.

Change the URL for the usernames.

Hi developers at Forums, I wanted to add a suggestion for you today.
I think using the forum profile link as; http://social.msdn.microsoft.com/profile/afzaal%20ahmad%20zeeshan%20(shani)/ is less attractive as compared to http://social.msdn.microsoft.com/profile/afzaal_ahmad_zeeshan_(shani)/
Well, a professional in HTML encoding decoding would barely notice the difference but a newbie would have some troubles. URL re-writing as
var url = currentUrl.ToString().Replace("%20", "_");
won't cost much. You can have the very same URL for the server-side codes but for the Browser window you can change the space bar HTML code to an underline, for better readability.
~!Firewall!~

I am pretty sure you have already read this
http://blogs.technet.com/b/exchange/archive/2011/01/17/configuring-multiple-owa-ecp-virtual-directories-on-exchange-2010-client-access-server.aspx
Can we have more information on the ip section from you.. how is your firewall treating the cas servers??
UMESH DEUJA MCP,MCTS,MCSA,CCNA

What is the URL for the keynote help link in the keynote app

what is the URL for the keynote help link in the keynote app on the ipad. I have a firewall in place to keep student from accessesing unwanted/restricted information, where can I find the url/ip address to unblock this site. Thanks

Hi Ravi,
As such there is no path for directly opening Visual Composer from the Netweaver system (I suppose this is what you mean by the acronym nws). Visual Composer can only be opened by the URL as given by Rahul:
http://<hostname>:<port>/VC
Bye
Ankur

Can anyone tell the URL for the Inspiration Browser Photoshop Element 10?

Can anyone tell the URL for the Inspiration Browser Photoshop Element 10?

You can review the similar thread here and try the steps http://feedback.photoshop.com/photoshop_family/topics/adobe_element_inspiration_browser_ha s_me_running_in_circles

What is the URL for the itunes u course manager?

what is the URL for the itunes u course manager? the one on the Apple site returns a page not found

https://itunesu.itunes.apple.com/coursemanager/

How do I find the url for the iTunes login website?

I am setting up 1Password4 for Mac with various login passwords and am having problems saving my iTunes and iCloud logins. Their "knowledge base" suggests doing it manually using the url. But I am unable to locate it anywhere. What is it? Or how do I find it? Or, ultimately, how do I save iTunes logins on a application like 1Password. I am using OSX 10.8.5, Mountain Lion.
Thanks for any help.

Can you explain in more detail what you mean? A URL is the address of a website - such as Apple.com or Harvard.edu. A computer will only have a URL if it has been set up as a web server and has name servers pointing to it (so that people looking for yourcomputer.com will be sent to the right place).
Conversely, every computer has an IP address, which is numerical. If you're connected directly to your internet, you will have a public IP address (it might look like 245.46.120.30, for example). Most people connect to the internet through a router, though, which gives them a private IP address only visible within their own network (something like 192.168.1.4).
Matt

Providing external url for the fqdn for webfeed returns error in eventlog that shows internal url is being used - how to change to the external url?

I've got my Rdweb accessible on both my internal and external network by using split dns locally to resolve the external url (remote.domain.com/rdweb) to resolve and everything works fine. However users don't want to use the rdweb interface (as it is slower
than just clicking on a rdp shortcut.
Following the notes at http://social.technet.microsoft.com/wiki/contents/articles/14488.distribution-of-remote-apps-and-desktops-in-windows-server-2012.aspx - I've tried to set up the webfeed on a Win7+ machine but when I enter the external url that
is protected by an SSL cert the eventlog shows that the internal address is being used and it doesn't match the certificate. - "There is a problem with this connection's security certificate.
The remote computer cannot be authenticated due to problems with its security certificate.
Security certificate problems might indicate an attempt to fool you or intercept data you send to the remote computer.
Windows cannot continue setting up this connection. Contact your workplace administrator for assistance.
Connection name:
Connection URL: https://internalservername/rdweb/feed/webfeed.aspx
How do I set the servers to use the external address rather than the internal one - i'm assuming it's similar to exchange's
Set-webservicesvirtualdirectory command but I can't find the equivalent command documented anywhere.
http://absoblogginlutely.net

Hi,
Thank you for posting in Windows Server Forum.
Please check below mention point.
• Create a relevant DNS entry in the mentioned zone to point to the RDS environment’s internal IP address
• Create a relevant DNS entry in external DNS to point to the firewall which is publishing RDS’s external IP address
• You can use the below mention script to change the FQDN of the RDP files provided by RD Web Access / RemoteApp and Desktop connection feed.
Change published FQDN for Server 2012 or 2012 R2 RDS Deployment
http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80
In addition please check below mention thread.
How do I change the URL to the Remote Web Access server in Windows Server 2012?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/67dfab70-7e10-4e0b-a3c8-63ce776f2355/how-do-i-change-the-url-to-the-remote-web-access-server-in-windows-server-2012?forum=winserverTS
Apart from this, also check the settings under; IIS in RDWeb Server as per below mention path.
Expand the default Website >Pages >Application Settings >DefaultTSGateway >
Enter the external address (FQDN) of the RD Gateway in the Value Field.
Hope it helps!
Thanks,
Dharmesh

Dynamic URLs for the mx:HTTPService component

I am looking to make the url property of an mx:HTTPService
component dynamic.
<mx:HTTPService
id="srvDivision"
url="
http://prodserver/prod/get_division.jsp"
useProxy="false" method="POST">
</mx:HTTPService>
I would just like to have an environment property or some
other way where the value is not compiled into the code but derived
at runtime. I am sure this quesiton has been asked before but I
couldn't find a direct answer. I currently use a ResourceBundle
(and properties file) but this is done at compile time. I would
like to change the value of the "
http://prodserver/prod" on the
fly, depending on what environment I am working in...dev or test or
whatever. I am not necessarily looking for the fastest way to do
this, but the right way to do this. Is Data Services the way to
go?

How about when i wanted my HTTPService url to become dynamic
that it gets from an external text file or xml file. Here is an
exampl...
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
xmlns:remoting="com.oreilly.
programmingflex.rpc.*" layout="absolute"
initialize="initializeHandler(event)">
<mx:Script>
<![CDATA[
private function initializeHandler(event:Event):void {
textService.send( );
private function resultHandler(event:Event):void {
textArea.text = String(textService.lastResult);
]]>
</mx:Script>

<mx:HTTPService id="textService" url="
http://123.136.72.41/mashupdemo/ip.xml"
result="resultHandler(event)" />
<mx:TextArea id="textArea" width="500"/>
<mx:VideoDisplay id="vid"
source="{textService.lastResult.subscribers.thevideo}" width="450"
height="338" x="20" y="75" />
</mx:Application>
As you can see my HTTPService URL points to a file named
ip.txt, the file includes my database URL where i will get my files
to be played in my VideoDisplay. Is there anybody who can help me
with this stuff. any reply would be very much appreciated.
thanks!!!

LSO - URL for the CMS and CP

Hello
I am trying to install LSO for a customer of us.
The components are installed, but during the configuration I need some URL's, but I have no idea how to retrieve the URL.
For the CMS we are going to use the portal.
What I need is the following URL's:
of the CMS
of the Content Player
of the Repository Server
of the Offline Player
url-prefix of the master repository.
Please advise
Kind regards
Boudewijn

URL of the CMS is WebDAV URL of one of the KM repositories .
Content player has to be configured by providing R3 user credentials and Portal user credentials at the following url
http://<hostname:port>/lms/mediator/config
Check performed here should show OK for successsfully playing contents from portal.And I hope you have deployed Content Player software on portal.
Try using http://<hostname:port>/ for content player url.
Also please let me know at which step do u require these URLs

Url for the 5.1 upgrade ???

what is the direct url to download the new update for the 5.1 ???

http://osxdaily.com/2012/03/07/ios-5-1-download/

Url for the geocoder

Similar Messages

Maybe you are looking for