URL for WD Application in portal

Hello Everyone,
My requirement is to send a link to a WD ABAP iView by email. Is there anyway we can find out the URL of the WD ABAP Application on portal? Please let me know about this. I would appreciate your help.
Regards,
Gopal.

Found the Short URL for the Application and used it.

Similar Messages

Cannot maintain JCO connection for webdynpro application in Portal Admin

I cannot create or modify the JCO connection in Portal Content Admin->the application.name while executing webdynpro application.
There should be a red or green icon Butr in my case for my application ,
The create or test is disbaled .Colored icon is not there.
I am using SAP sneak preview and its first time.Should I check SLD settings.Pls help.
George

how to maintain it?
accidently deleted SLD form localhost/sld url and now i cannot change or add the sld.It gives page cannot be displayed.PLs advice how to fix it or should i reinstall it?
George

URL for Oracle Applications

I have access to oracle appplication 11i server and I want to login to apps for concurrent manager status .Where can I find the URL of Oracle Applications 11i?

I am an oracle application trainee.
please send me the url and login password infromation for oracle application for practice.

How to create the IView and Roles ,User for WebdynPro Application in Portal

Hi,
I have one simple webdynpro application. i want to create the user,Role and Iview for my webdynpro application in the Portal . after that i need to assign the roles to the user and i want to see the different output for each user depends upon the Role.
Can anyone give me Tutorial page(PDF) or Guide me How to do?
Thanks in Advance
Regards
Ramkumar

Hello Ramkumar,
following please find the link to available documentation in SAP Help Portal:
http://help.sap.com/saphelp_nw70/helpdata/en/42/fa080514793ee6e10000000a1553f7/frameset.htm.
Regards,
SAP AG
Gesine Raith

Http500 when trying to access URL for Oracle Application Server Console

We have a new install of R12.1.0 on Windows 2003 R2 (32bit). The Applications seem to work fine. Users can access the R12 applications and submit jobs.
We need to configure a new oc4j instance, so we are trying to access the Oracle Applications Server Console for the first time. After entering the URL below, we encounter an Http 500 error. The Application server console service is running.
http://wbf-soadb.bolthouse.int:18100/emd/console
Thanks

Mark,
The document (Note: 603716.1 - Using AS10g AS Control with eBusiness Suite Rel 12) used to be available for public access but seems not anymore. Please log a SR to get a copy of this doc as you need to follow the steps in this doc to access AS Control with R12.
Thanks,
Hussein

Shrinking URL for WebDynpro Application

Hi ,
I'm doing an application in web Dynpro that dispatching to Web by using WEB Dispatcher.Here i want to Supressed the unwanted URL Parameters.
for Example My actual URL looks like this :
http://filqua.Mayo.inet:8080/sap/bc/webdynpro/sap/zdoms?sap-language=EN
i want in this format :
http://doms.Mayo.in
Please help in this issue.
Regards,
Malik

Hi Rama,
First of all thanks for ur reply....
I found out how to reduce the size of URL with the very informative help from THOMAS JUNG.
Step 1->We need to go to T-code-> SICF .
Step 2->Click on External Aliases button.
Step 3->It will navigate to Maintain external aliases page, over there we will right click on Virtual Host-> Create External Aliases
Step 4-> Enter node name for External Alias and give some description.
Step 5-> Go to Logon Data tab, fill the required information for (Client,User, Password,Language).
Step 6-> Next go to Trg Element tab, drill down for ur created Program i.e (host->sap->bc->webdynpro->ur program)
double click on ur program, save it and click on back menu button.
Step 7->Select ur created external alias name right click and go for Test Ext. Alias.
It will show u the final result , u can check ur final URL with any browser it will work..
Thanks,
Malik

Rewriting http headers and url for Oracle Applications

We are running Oracle financial applications and need to provide access to users on the Internet. We can do that fine except for people behind tightly controlled firewalls that only allow port 80 and 443. Oracle insist it has to run it's apps using SSL on non-standard ports like 8001 and such which means many people can't get to them. So to make sure everyone can get to the apps I need to preset it on port 443. Changing the apps/servers isn't an option for many frustrating reasons so I'm looking for something that can reverse proxy and rewrite headers and url's. The hard part is the headers and all urls in the web pages need to be changed on the fly because Oracle hard codes everything with absolute paths.
Can someone give me some advice on what Cisco product(s) may be able to help?

After bringing this up with my Cisco rep it was recommended I look at the AVS 3120 box which is supposed to support the header/url rewriting I need. Can anyone with experience with these boxes let me know if I'm being steered in the right direction? The documentation doesn't seem to specifically mention this ability or if it does it's worded in a way that doesn't make it obvious.

Finding a FM/Programmes for an application on portal

Hi Experts,
Is there any way by which i can find out that what are the backend programmes/FMs that are getting called from a portal application.
Basically the requirement is to cahnge some standard functionality of portal and the content that is being displayed.
For that i need to know from what backend programmes/FMs the screen on the portal is being populated.
Thanks

Hello,
You can query the linked server without having to specify credentials if you defined on the creation of the linked server
what user login/password the linked server will use to connect to the remote server. In that case you can query the linked server like this.
SELECT * FROM OPENQUERY('LinkedServerName',@TSQL)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Get URL for WDJ application

Hi guys!
Deployed an application (ear file) on server.
URL is: http://<server ip>:50000/webdynpro/dispatcher/sap.com/jaswd/JCaptcha?SAPtestId=2&answer=init&guid=4C19CB2279C6019DE10080000A0FF2AC
Is there any class (like CL_WD_UTILITIES=>CONSTRUCT_WD_URL) to get this link from abap?
Thanks!

Hi,
Is this a static link ? You can directly copy & paste the link and hardcode it.
Thanks & Regards
Umang

Repoint or change the URL for an application

Hi,
I have deployed an application (Java based) via OC4J using Oracle application Server ,
URL Application : http://200.100.11.232/test
Enterprize manager URL : http://200.100.11.232
Can you tell me how I can point http://200.100.11.232/test to the test application instead of the enterprise manager home page. I want to use Enterprise manager URL to run the application , Advise needed Please.
best regards

changing mod_oc4j.conf could help as well using virtual hosts with Rewrite in httpd.conf could do the work.
Hope this helps.
Greetings.

Issues with portal integration of Web dynpro for ABAP application

Hi,
I have the following issues when i integrate a Web Dynpro for ABAP application with portal.
1. the iview does not contain some images, such as table scroll button images, maximize and close buttons of popups etc.
2. the iview loads properly, but there is an error in the status bar that says "Access denied"
3. is it possible to do absolute navigation from
   role1->folder1->iview1 to role1->folder2->iview2?
   when i fire this navigation from the webdynpro
   application, the navigation does not happen in the
   portal.
thanks,
Kavitha

>
sridhar vadaga wrote:
> Hi Experts,
>
>
> CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
>   EXPORTING
>     text           = url
> IMPORTING
>    BUFFER         = content .
>
>
> Thanks & Regards
> Sridhar
I think you are overestimating the power of the SCM_STRING_TO_XSTRING function module. By supplying a URL as the value of the input text, it isn't going to magically go read the content from the remote location and convert that to a binary string. It is going to take whatever value you supply in th importing TEXT parameter convert that to binary. In other words it is literally converting the string http://xxx/test.xls to binary. You will need some other mechanism to read the content from the remote location into ABAP memory before you can process it. You will need to use the CL_HTTP_CLIENT class or call some sort of web service to retrive the content.

No suitable driver for mysql in oracle application server portal 10g

Hi all
i want to run my portlet with mysql4.1 database from "oracle application server portal 10g".
i did all configuration in data source and also i kept mysql connector jar file into all oraclehome/jdbc/jlib folder.
Mysql
General
Name :: helloMysql(jndiname)
Description :: helloMysql
Data Source Class :: com.mysql.jdbc.jdbc2.optional.MysqlXADataSource
JDBC URL :: jdbc:mysql://localhost:3306/database?relaxAutoCommit=true
JDBC Driver :: com.mysql.jdbc.driver
Datasource Username and Password
Username------------>(user name)
password-------------->(password)
JNDI Locations
Location== jdbc/helloMysql
jdbc/blogOracle== jdbc/XA/helloMysql
EJB Location == jdbc/XA/helloMysql
Connection Attributes
Connection Retry Interval (seconds)====1
Max Connection Attempts===empty
Cached Connection Inactivity Timeout (seconds)===30
remaing all are empty
when i run the portlet, then i am getting "No suitable driver" in my portal page.
i want check server console or server log for oracle application server portal.
please help ,where to find server log?
Any suggestions or help from your side.
Thanks in advance.
Raju

I think you're trying to connect to a database in a diferent host than the Web Server.
This is possible in applcations, but not in applets, who only can open TCP connections to the same machine who served the page.
To do that, yo should use a Data Gateway to establish the connections (IDSServer, and so on). I think that installing Oracle's Connection Manager in the same machine than the Web, it would run.
null

I want to create home page for my application with short URL

I want to create home page for my application with short URL
as when I want user to use my application user must go to URL like this
http://127.0.0.1:7101/My-Project/faces/app/empModule/allEmployees/viewMyEmployees.jspxI want the user to use short URL , How can I use shorter URL not all this one.
I want shorter URL for my application not to write full path .
thanks in advance.
Edited by: user611775 on Oct 31, 2010 10:21 PM

Well,
it's up to you. The first part (Mcit-Project-ViewController-context-root) is the context root which you define in the view controller project. 'faces' is the name the servlet filter reacts on. You can't omit it but shorten it in web.xml. The rest is your directory structure. I'm not sure how to shorten this other as to move the jspx files back into the web root folder.
By the way an ADF faces app never uses the .jspx at the end of the url. If you specify '.jspx', you only render the page but don't start the work flow.
Timo

Portal integration of Webdynpro for ABAP application

Hi all,
Can anyone provide me with the steps for <b>integrating a Webdynpro for ABAP application with portal?</b>
Regards,
Bino

Hi Bino
Check out the following link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/webdynpro/portal integration of web dynpro applications.pdf
Regards
Rajeev.
Do award points for helpful answers in SDN.

Issues witn portal integration of Web dynpro for ABAP application

Hi,
I have the following issues when i integrate a Web Dynpro for ABAP application with portal.
1. the iview does not contain some images, such as table scroll button images, maximize and close buttons of popups etc.
2. the iview loads properly, but there is an error in the status bar that says "Access denied"
3. is it possible to do absolute navigation from
   role1->folder1->iview1 to role1->folder2->iview2?
   when i fire this navigation from the webdynpro
   application, the navigation does not happen in the
   portal.
thanks,
Kavitha

Hi,
Use a Transparaent container (TCO) inside it use the tabstrip and make it as matrixheader as per rootUI.
You can also set the layout for TCO as matrix and do the necessary changes.
Regards,
Lekha.

URL for WD Application in portal

Similar Messages

Maybe you are looking for