URL icons and Domain Masking

Okay. I have a new question that needs answering.
I have followed instructions found elsewhere in this forum, and have successfully gotten my url icon to work. If you go to web.mac.com/merchandise1 you can see a little "M" in the bar.
Here's the problem, though. I don't use that address on my business cards, email flyers, etc. I use merchandiseonline.org
The url icons DO NOT WORK when you go to the masked/forwarded url address of merchandiseonline.org
I use DirectNIC for my forwarding purposes. So, my question, then, is:
HOW do you get the favicons (url icons) to work when using a masked address?
I've searched forums upon forums and have not found the answer. I pray someone here will have an idea.
Thanks,
James @ merchandise

That second link was a good one. So, that's pretty much it. When you go to www.merchandiseonline.org and view the source (not the frame source), the favicon code is nowhere to be found. However, you can see it in the frame source. But that doesn't matter, in this case, as the frame source isn't actually the page you're looking at (for purposes of the URL icon).
Conversely, if you go to http://web.mac.com/merchandise1 and view the source, the favicon code is there, and you can probably see the icon in the url.
The trouble is, it seems there is no way to edit the source code, since it is a code supplied by the company who holds my domain name (directNIC, in this case). I contacted them, and GoDaddy.com, to see if there was any way to edit (or have them edit) the code into the source of the merchandiseonline.org domain name. After a lot of gobblydeegook talk, they seemed to say "no."
So, unless any of you know a for me to circumvent this roadblock, while being able to keep merchandiseonline.org as my address, I might be out of luck.
-james@merch

Similar Messages

  • I can no longer drag and drop my bookmarks or url icons

    All of a sudden I can no longer drag and drop my bookmarks around the sidebar or drag url icons into the toolbar or sidebar. The problem seems to have coincided with the download of 3.6.14. The only other thing I did around that time was download Adobe Reader X (10.0.1).

    YOu're not looking in the right palce. That's inside the iPhoto Application.
    You need to look inside the iPhoto Library
    As I sid above:
    Go to your Pictures Folder and find the iPhoto Library there
    Regards
    TD

  • How to Publish Multiple Websites Using Domain Masking

    Let's say I have a mobileme acct called applesoranges, but then I decided not to use this name for my website. Using iweb, I have created a different website called blueberry.com, and was able to figure out how to set up my personal domain and then mask appleoranges so that only blueberry.co, appears.
    I now want to add another website called strawberry.com. With one mobileme acct (applesoranges), is it possible to host 2 separate websites, each of which is masking the original mobileme acct? How does one set up 2 separate websites using iweb (each masking the original acct name)?
    Many thanks!

    For every MobileMe account you can only use the personal domain name option and CNAME only once. You enter your first domain name into your MMe account and then go and set up CNAME forwarding at your domain registrar to forward to web.me.com. For any other sites that you create, you need to go to web forwarding. You set-up the other domain names by using masked web forwarding and point them to web.me.com/username/sitename and by masking these will just show your domain name address and not your MobileMe/iWeb url.
    Make sure that you separate out your sites, as it will be easier. You can either duplicate the domain.sites files and have one site per a domain file or use a program called iWebSites to help you manage multiple sites.
    You also have the option of not using MMe and you can publish to a folder instead and upload directly to each domain hosting space. This gets away from the problem of how to forward sites to iWeb/MMe.

  • Date/time icon and other movable icons on menu bar cannot be loaded on startup,but it works if manually loaded

    Strange things happened since my mbp 13' (MD-101) was upgraded to 10.8.4 ----------- time icon, battery icon,and language icon (these icons can be moved when held Command key and drag) cannot be loaded on startup, but they still can be loaded when you get into System Preferences and manually  turn them on, as well as iStat Menus
    However, some other icons didn't bother, things like BetterTouchTool, NewsBar. They are immovable!! I guess it is the key factor that the icon is movable or not making the difference.
    Someone please lend me a helping hand?
    I've attached some pictures in order to make my situation easier to be understood.
    these icons can't be loaded on my loggin in.
    but they can be loaded manually
    however, these icons will be loaded on startup
    I've almost despaired to resolve it . Thanks for your help!

    I have a similar issue. When the computer goes into "Hibernate" mode -- that is, it loses power while sleeping and it writes the contents of it's memory to disk in order to boot into that exact configuration when woken up -- many of my icons when Apple-Tab'ing to another application appear as static. They look like a slightly colorized version of the "static snow" you see when tuning into a station that doesn't exist on a UHF antenna television. Also, icons in Chrome such as web sites "favorite icons" or favicon.ico (the icons that appear in the URL bar and bookmarks) will be scrambled in the same fashion , at first , until the actual icon is loaded.
    Between this, my menu bar and finder icons not displaying, and being unable to boot into safe mode, I'm getting quite ******. I have no idea what the **** is going on with my Macbook Pro. The issue of the scrambled icons actually existed prior to installing an SSD and doing a fresh install of Mountain Lion. I may end up throwing in the towl and re-installing the operating system but I'm sure SOMETHING will happen. It seems the latest update, 10.8.2, is absolute garbage.
    What the ****, Apple? And I really don't want to take the computer to the morons at the Apple Store. They are not "geniuses" by any measure.

  • How can I change the look of URL Icons?

    I have created several web site URL shortcuts and put them in my Dock (actually I just drug the web site URL's to my Dock, Apple crated the ability for me to do so).  I have a iMac desktop, with OS X Mavericks 10.9.1.
    My question is:  Is there any way to change the look of the icons for the URLs that I have in my dock? (so far I have 5).  They all look the same, an @ sign on top of a pedestal with a spring.  I would like to at least change the face of the icon, the @ sign, to a picture of my choosing that would enable me to tell the difference of each one at a glance rather than having to slide my mouse pointer over each one to get the name of the web site to pop up. 
    Below is a picture of three of the icons on my dock.  As you can see they all look the same, almost like the "Contacts" icon which is an @ sign on a book cover.
    Best regards and still looking for clues  and answers,
    Peohguy

    Your post helped me a lot.  After all of the dust cleared and after sorting through all of the answers, the post(s) that solved my problem were from Kenichi Watanabe.  However, I did have to go through all of Kenichi's posts to get the complete method that worked.  Some of the other posts were difficult for me to comprehend and did not seem to work for me.  I probably didn't do them like the writer's intended?   Again thanks for taking the time to read my question and dig through your memory bank to come up with the thread that helped.
    Best regards,
    Peohguy

  • How do you make an array of image icons and then call them?

    How do you make an array of image icons and then call them, i have searched all over the internet for making an array of icons, but i have
    found nothing. Below is my attempt at making an array of icons, but i cant seem to make it work. Basically, i want the image to match the value of the roll of the dice (rollVal)
    Any help would be greatly appreciated, some code or link to tuturial, ect.
    /** DiceRoller.java
    * Roll, print, Gui
    import javax.swing.*;
    public class DiceRoller extends JFrame
         private ImageIcon[] image  ;
         public String[] images = { "empty", "dice1.jpg",
                   "dice2.jpg", "dice3.jpg", "dice4.jpg",
                   "dice5.jpg", "dice6.jpg" };
         public Dice die;
         private int rollVal;
         public int rollNum;
         private JLabel j1;
         public DiceRoller(){
              j1= new JLabel("");
           die =new Dice();
           int rollVal;
           rollVal = die.roll();     
           image = new  ImageIcon[images.length];
         for(int i = 0; i < images.length; i++){
          image[i] = new ImageIcon(images);
         if (image!=null){
              j1.setIcon(image[rollVal]);
         System.out.println("Roll = "+die.roll());

    Demo:
    import java.awt.*;
    import java.net.*;
    import javax.swing.*;
    public class IconExample {
        public static void main(String[] args) {
            EventQueue.invokeLater(new Runnable(){
                public void run() {
                    launch();
        static void launch() {
            try {
                Icon[] icons = new Icon[6];
                for(int i=0; i<icons.length; ++i) {
                    String url = "http://www.eureka-puzzle.be/cast/images/dice" + (i + 1) + ".jpg";
                    icons[i] = new ImageIcon(new URL(url));
                display(icons);
            } catch (MalformedURLException e) {
                throw new RuntimeException(e);
        static void display(Icon[] icons) {
            JPanel cp = new JPanel();
            for(Icon icon : icons) {
                cp.add(new JLabel(icon));
            JFrame f = new JFrame();
            f.setContentPane(cp);
            f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            f.pack();
            f.setLocationRelativeTo(null);
            f.setVisible(true);
    }

  • How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

    Hi
    I have  Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
    Thanks in advance!!!
    Sincerely yours
    Sergey Bondarenko

    Hi
    Thanks for your attention for my humble problem.
    I have performed Meeting Place Express configuration through the “net” command.
    But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
    Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of  cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
    Have you any idea?
    A lot of thanks in advance!!
    Sincerely yours Sergey Bondarenko
    Here I have printed the net configuration output of Cisco meeting Place Express:
    [root@cumpxvoice root]# net
    This is the MeetingPlace Express network configuration utility.
    Up to the point where you save changes, it is safe to hit ^C to get
    out at any time, in which case nothing will have changed.
    1) List current configuration
    2) Configure Ethernet port 1
    3) Configure Ethernet port 2
    4) Configure service bindings
    5) Set host names
    6) Set domain name
    7) Configure DNS service
    8) Configure NTP service
    9) Configure routing
    10) Done
    Select: 1
    Primary/audio host name: cumpxvoice
    HTTP host name:          cumpxvoice
    RTMP host name:          cumpxweb
    Domain name:             uclab.com
    Service bindings:
    Audio:                   port 1 (eth0)
    Web browsing (HTTP):     port 1 (eth0)
    Web conferencing (RTMP): port 2 (eth1)
    Port 1 (device eth0):
    IP Address:      10.62.60.116
    Network mask:    255.255.255.0
    Default gateway: 10.62.60.1
    Link setting:    autoneg on
    Port 2 (device eth1):
    IP Address:      10.62.60.117
    Network mask:    255.255.255.0
    Default gateway: 10.62.60.1
    Link setting:    autoneg on
    Static routes:
    Destination      Gateway          Network mask     Port
    0.0.0.0          10.62.60.1       0.0.0.0          1
    DNS Servers:
    10.62.60.115
    10.0.1.4

  • How to add URL Icon for each responsibility

    Hi all,
    I have a requirement where i need to add URL Icon to my custom application, i,e when i click on responsibity it will open the application so to make user to know he is in this application we need to add ICON to URL. This is possible in normal HTML just we need to include these two lines in head tab.
    <link rel="icon" type="image/ico" href="favicon.ico"></link>
    <link rel="shortcut icon" href="favicon.ico"></link>
    How can we achieve the same in the OAF?
    Thanks
    Babu

    Hi Josephine
    Please proceed as below:
    1. SE51.
    2. Change the layout.
    3. Add 2 pushbuttons at your desired location.
    4. Double click on each button for Attributes.
    5. In the attributes, give the Name, Text.
    6. Select the Icon Name from the list: Eg: ICON_OKAY and ICON_CANCEL.
    7. Go back to layout.
    8. Save & Activate
    9. Now you can test the screen to check the icons displayed in the screen.
    Hope this helps.
    Kind Regards
    Eswar

  • Menubar Iconfield loading url icon..?

    Hi.,
    I am using flex menubar  iconField to loading dynamic url icons..
    Any one hopefully help this problem..
    With Regards.,
    Ling's

    Hi,
    I don't think the iconField will work for the purposes of loading images. The menubar expects a class IE ByteArray of image data since it instantiates it with the new operator.
    You would need to create a new MenuBar.menuBarItemRenderer that knows how to load external image urls. This class needs to implement IMenuBarItemRenderer, you could also subclass MenuBarItem and override commitProperties() to create the Image and load it from the data's icon field.
    Mike

  • How do i customize my bookmarks toolbar into small icons instead of just icons and text?

    i can only have ten bookmarks on my bookmarks toolbar because i can't seem to get the small icons to work. the small icons works on the navigation toolbar, but not the bookmarks toolbar.

    You have an item "My Web Search . . ." plug-in which is a well known troublemaker.
    You should work through the following removal instructions as far as you need to (Google for information if you have any doubts.)
    Courtesy of '''Helper7677''' -
    You have an item installed that is considered malware/spyware/adware. To see the Plugins reported with your question, click "More system details..." to the right of your original question or, on the Firefox menu, click Tools > Add-ons > Plugins.
    My Web Search Plugin Stub for 32-bit Windows
    This type of pest is usually installed along with software you download from the internet; generally free programs, but not always. Carefully watch for "extra" items that will be installed and un-check or opt-out of them.
    You can check to see if you have any of these from [Fun] Web Products" installed:
    Control Panel > Add or Remove Programs, click on any that you find and click "Remove": Ask.com Bar, My Search Bar, MyWay Speed Bar, My Web Search Bar, Fun Web Products Easy Installer
    See:
    http://www.safer-networking.com/removemywebsearch.php
    PC Hell: My Web Search Removal Instructions
    http://helpint.mywebsearch.com/intlinfo/help/toolhelp.jhtml#q3
    Also see: http://kb.mozillazine.org/Uninstalling_toolbars
    You MAY need to change a preference if when typing one or two words in the URL/Location/Address Bar sends you to some search page other than the one you expect. To reset your default URL/location bar search provider:
    Enter about:config in the address/URL bar and press the Enter key
    If you see a warning, accept it (Promise that you will be careful)
    Filter = keyword.URL
    Below the Filter, if keyword.URL is bold, right-click on keyword.URL and choose "Reset"
    Restart Firefox (File > Restart Firefox)
    See: http://kb.mozillazine.org/Keyword.url

  • Iphone 4s all apps are disappear including setting, contacts, call icon and etc. can someone help me?

    I am currently using iphone 4s , i didn't update the latest IOS 7.1 (I forgot i have updated which ios 7) . I can't go in to a particular apps, so i restart my phone. After I restart my phone, all apps are disappear including setting, contacts, and call icon and etc. can someone help me?  The phone now only remain two apps. I try to search using the phone serch engine but when i click on the result, there is a message pop out as: Unsupported URL 

    Swipe back (right to left) to the home screens that contain the rest of your apps.
    Failing that, reset the phone: hold down Sleep and Home buttons until the Apple logo is displayed.  No data is lost.

  • What happened to home icon and others in safari?

    I liked the home icon and another.  Are they gone from # 6?.

    What Home Icon are you talking about? You can still add a shortcut to the Home Screen by tapping on the arrow icon next to the URL field and select - Add to Home Screen.

  • Create a Custom Icon to Replace the Standard URL Icon in Dock

    I would like to change the "springy thing"/URL icon in my dock to a custom picture showing the logo for the webpage for that particular "springy thing." Is it possible to change the spring to a custom icon? If so, how can I do this? Your help is greatly appreciated! Thanks.
    iBook G4   Mac OS X (10.4.8)  

    Generic urls dragged directly to the "Dock" will use that default icon (or whatever icon is substituted), but every url will use that same icon.
    If the goal is to have separate urls in the "Dock", each with its own custom icon, try dragging a url to the "Desktop" first, which should result in the creation of a ".webloc" file. The file can be given a custom icon the usual way via "Get Info", and added to the "Dock", but note that this requires that the ".webloc" file be stored somewhere for that "Dock" shortcut to remain valid.

  • Domain masking

    Hi all,
    I have an iWeb site hosted by .mac, and I understand that if I buy my own domain and use domain masking, people can visit the site by going to mynewdomain.com or wherever.
    I'd like to know what appears in the address bar for each page of my iWeb site. If someone clicked on, say, a Photos link, can I make the address bar show mynewdomain.com/photos.html or does it remain static at mynewdomain.com?
    Thanks for your help,
    Ryan
    iMac G5 2.1 GHz, 1.5 GB RAM   Mac OS X (10.4.9)  

    Hopefully the coming update of iWeb will allow for
    more flexibility.
    The iWeb app doesn't have anything to do with how masking or forwarding works.
    Without masking, a forwarded site will normally show both the site name and the page name in the browser address bar, e.g.
    http://www.mydomain.com/sitename/pagename.html

  • IWeb and Domain Names

    Hi, I've purchased several domain names and want to publish websites to my iDisk which I want to be found on search engines. Is CName the only way to do this, thus limiting me to only use one CName and one domain name? Be patient, I'm new and slow. Thanks

    Thanks Wyodor,
    OK Cname has nothing to do with being found by a search engine, but what does? I have published a site anstock.org on which I want to develop family tree information but an anstock search doesn't show up on a google search.
    Yes I can do URL forwarding and I have learned how to publish different sites using iWebsites, but no search engine is picking up my site. I'm practicing to get ready for a business. I'm a therapist and own sandplay.net.au but typing in sandplay in google does not pick up my URL forwarded (practice) page.
    Further advice would be greatly appreciated.

Maybe you are looking for