Url idle with ccm 5.1: where upload the image file?
Hi,
I'm trying to work the url idle feature in ccm 5.1.
The phone gets the message error http (404).
I have the default configuration on the enterprise parameters of the callmanager and I have upload the xml image file in the tftp directory and in a ccmcip directory, but it doesn't work.
Where must I upload the image file or why it dosn't work?
I am having the same problem...I don't suppose you would mind being a bit more specific!!!????
Similar Messages
-
Accesing url idle ccm 5.1: where upload the image file?
Hi,
I'm trying to work the url idle feature in ccm 5.1.
The phone gets the message error http (404).
I have the default configuration on the enterprise parameters of the callmanager and I have upload the xml image file in the tftp directory and in a ccmcip directory, but it doesn't work.
Where must I upload the image file or why it dosn't work?You can try this link for Idle URL timout
http://cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801c0764.shtml -
I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs. What am I missing?
Thanks,
upsjdrisHave you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
You can set Aperture to import raw, jpeg, or raw&jpeg.
If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
Photos > Use Raw as original.
Regards
Léonie -
Where is the image file size???
Where is the image file size in LR3? I can't see it anywhere neither in the Library module, nor in the Develop module.
As far as I know Lightroom does not display the file size. Keep in mind that LR never makes changes to the Original files that you import.
When you export a file with LR edits the file size generated will depend on the edits applied and the size and quality settings you choose in the export dialog. -
Where are the image files located?
hey guys, my book is 75 mb and I can only guess that it's because my images are Too big. I don't know how to get the file sizes down because I replaced them but they must still be retained in the image folder because when I look at the size its 75mb. Does anyone know where the images are located?
Finding out where the images are held doesn't really help – here's why:
iBA a files aren't really document files – they're more like zipped folders. iBA does a whole heap of background stuff to make the book work. When you drag an or import an image into iBA, it gets filed into a certain place within that folder structure, and presumably 'logs' that location in some xml-type wizardry somewhere else in that folder structure.
Because of this, it's not a great idea to muck around with any of that stuff - it often makes things worse, not better.
As for image size - as Vinny said - all you can do is make the images 2048 x 1536 if you want view them full screen. That looks best on a Retina display, as almost all iPads being sold now are.
I don't know what your intentions are with the project, but in my experience, 75Mb pretty small. Is 75Mb the iBA file or an exported .ibooks file? Once a book gets exported to .ibooks format, the file size comes down. The iBA files I have worked on are much larger – the smallest being about 975Mb, going up to about 3.25Gb. -
Question about image preview in client side before upload the image file to server
Hi everyone:
My project has an image upload function. Currently it only display a fileupload component, after user press OK, the file will upload to server, but there's no preview before user press OK.
I want it can show the preview, I know that I can upload the file to a temporary directory on server then show that image to client, but in this way will cause strain on server. Is there any other ways to preview the image? Like using JavaScript? Thankyou.Stuck with BMP
-
I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
Bad Image
There was a problem with the image file.
Please help.Can you drag it to the Desktop?
-
Where are the backup files for my iPad located on my macbook pro with maverick ?
where are the backup files for my iPad located on my macbook pro with maverick ?
As an addendum, if I need to, and hopefully won't, unless I switch computers, how can I revert from a copy of a different backup? Thanks. :-)
-
Mac Book Pro Retina with Mt Lion. Where is the Hard Drive?
Mac Book Pro Retina with Mt Lion. Where is the Hard Drive?
Technically there is no "hard drive" in the Retina MacBook Pro, as all models come with "flash" storage which isnt a "hard disk drive." So if you are wondering why you are not hearing classic hard drive chatter and spin-up sounds then this is the reason.
Other than that, logically the devices are treated the same, so as Kappy mentions you just have to enable it on your desktop or go to your computer name in the Finder sidebar under "Devices" or otherwise go to the top level of the system's folder structure to reveal any mounted volumes, including the internal drive. -
When you sync your iPhone 4S with a windows computer , where are the contacts backed up to
When you sync your iPhone 4S with a windows computer , where are the contacts backed up to
Take a look at this Apple doc -> iTunes: About iOS backups
It shows the locations of backups and how to use them with iTunes. -
Hi all, my first time on. I shared my imovie project to Media Browser. Fine. Then after it downloaded it 'disappeared.' Where did it go? Having found it, how do I then share it with idvd? I am told the image quality will be much better this route.
Hi
I do
• In iMovie - select a project
• Share to Media Browser and as Large (not HD or other res.)
• Close iMovie
• Open iDVD and select to start a New iDVD Project
• Import movie - from Media button - down to the right - and here from Movies
Yours Bengt W -
Downloading youtube with safari - Where's the large file?
Two recent problems that never occurred before. When the Youtube is playing and I look at Activity, it used to be obvious which was the large file that I was supposed to click on --- they were all in kb's except for one giant one, in MB's, that stuck out like a sore thumb. Now, there is no giant one. So I clicked on one of the small kb files, and it downloaded as an flv file, which I can't use. This is new...previously, a useable format downloaded. So, I am guessing that once I solve the "where is the giant one" problem, I will need some kind of flv converter. Thus, my 2 questions are: (1) Where is the giant file? (2) Suggestions for an FLV converter. Thank you. I'm running Lion. - Robert
Checked your Downloads folder yet?
-
IN SE78 : WHILE UPLOADING THE TIF FILE I AM GETTING THE ERROR
Hi ,
While uploading the drawing in se78 . iam getting the errror
"erroneous tif formate"
. PLz help me to upload the tif file thro se78.
even i removed the compression check box ,.
Thanks,
RaniHi
You can upload logo using SE78 or using program RSTXLDMC
or by using OAER
Steps for uploading Logo :-:
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you
wish to give
5. Execute
6. Then in the new screen select Standard doc. types
in bottom window
Click on the Screen icon
Now, it will ask for the file path where you have
to upload the logo
7. Now you can use this logo
To create a logo in SAP printouts just do the following
1. Save a Logo using Imaging, Paint shop Pro or Corel Draw as Tiff file.
2. Run program RSTXLDMC and enter the following parameters
Enter file name C:\COMPLOGO.TIF
UOM CM
Line width for text 132
Text name ZHEX-MACRO-COMPLOGO
Text ID ST
Text language = E
Number of Tiff gray levels (2,4,9) 2
3. Then Create a new window 'COMP' with attributes;
Window COMP description Company Logo
Left margin 7.00 CH window width 10.00 CH
Upper margin LN window height 8.00 LN
Finally in the text element, mention
/: INCLUDE 'ZHEX-MACRO-COMPLOGO' OBJECT TEXT ID ST LANGUAGE 'E'.
Please note that if object name is not indicated as 'ZHEX... the logo may not be printed!
You will not be able to see the logo in a test print. The same will be printed in actual printout.
SMARTFORM
1) In Smart Forms Editor, In left pane, right Click any Page (say Page1) and select Create -> Window, Give it a name and Description (Say Window1)
2) Right Click on Window (Window 1) and select Create -> Graphics, Give it a name and description
3) In general Attributes, Select Name, get search help (F4) , you will find a list of pictures
4) Select any picture and set its Resolution in DPI
5) Press F9 to open Smart Forms Builder, Select window (Window1) and In Output options window set, size and position of the Logo
6) Set any other parameters if required, save and activate.
7) If there is only 1 Window in the forms, set it as Main Window in general attributes.
8) Use TCode SE78 to upload new pictures and logos.
look at Thread Dynamic Graph in smartforms
Refer the links also -
Re: Dinamic Graph in smartforms
How to get file perperties in Unix server
Regards
Selvapandian Arunachalam -
Hi All , validating the overlapped periods ,Uploading the xml file to sap
Hi All,
please provide me the logic for the following requirement: Its an urgent .
Upload Global exception periods via File:
A customized transaction will be created for uploading the global exception periods using
an excel file. User has to maintain the global exception periods in an excel sheet with the
below mentioned format and upload the file manually into the system. The global
exceptions are maintained at step of half hourly period with a factor value.
Please find the format followed for maintaining the global exception periods in the
excel sheet.
Date From Period From Date To Period To Factor value
06.02.2008 12 06.02.2008 14 1.2
07.02.2008 1 07.02.2008 2 1.4
07.02.2008 3 07.02.2008 4 1.2
07.02.2008 5 07.02.2008 6 1.6
07.02.2008 7 07.02.2008 8 1.1
Once user uploads the excel file and press execute button, file contents are downloaded
and the global exception periods are updated into ZLF_GEXCEPTION table. Please refer
the necessary table format for details.
During the upload of global exception periods, the periods are checked if it is overlapping
with the previously uploaded periods. For those overlapping periods, below method is
followed.
1. For e. g, If a below exception period is already uploaded,
Date From Period From Date To Period To Factor value
06.02.2008 12 06.02.2008 16 1.4
The new file contains the period which gets overlapped with the previous global
exception period.
Date From Period From Date To Period To Factor value
06.02.2008 14 06.02.2008 15 1.6
The overlapped periods are split accordingly,
Date From Period from Date to Period To Factor value
06.02.2008 12 06.02.2008 13 1.4
06.02.2008 14 06.02.2008 15 1.6
06.02.2008 16 06.02.2008 16 1.4
2.For e.g., Already existing period,
Date From Period From Date To Period To Factor value
06.02.2008 12 07.02.2008 16 1.3
New period,
Date From Period From Date To Period To Factor value
07.02.2008 5 07.02.2008 8 1.7
The Global exception periods are split into,
Date From Period From Date To Period To Factor value
06.02.2008 12 07.02.2008 4 1.3
07.02.2008 5 07.02.2008 8 1.7
07.02.2008 9 07.02.2008 16 1.3
If any error occurs while updating the global exception periods into ZLF_GEXCEPTION
table, then display LF-001 message given below the Error messages section. For the
successful updating of global exception periods to ZLF_GEXCEPTION table, then
display the message Successfully completed.
User will be provided an option to download the global exception periods into an excel
file. User has to provide the necessary location details where to download the file while
downloading.
Thanks&Regards.
BkHi All,
please provide me the logic for the following requirement: Its an urgent .
Upload Global exception periods via File:
A customized transaction will be created for uploading the global exception periods using
an excel file. User has to maintain the global exception periods in an excel sheet with the
below mentioned format and upload the file manually into the system. The global
exceptions are maintained at step of half hourly period with a factor value.
Please find the format followed for maintaining the global exception periods in the
excel sheet.
Date From Period From Date To Period To Factor value
06.02.2008 12 06.02.2008 14 1.2
07.02.2008 1 07.02.2008 2 1.4
07.02.2008 3 07.02.2008 4 1.2
07.02.2008 5 07.02.2008 6 1.6
07.02.2008 7 07.02.2008 8 1.1
Once user uploads the excel file and press execute button, file contents are downloaded
and the global exception periods are updated into ZLF_GEXCEPTION table. Please refer
the necessary table format for details.
During the upload of global exception periods, the periods are checked if it is overlapping
with the previously uploaded periods. For those overlapping periods, below method is
followed.
1. For e. g, If a below exception period is already uploaded,
Date From Period From Date To Period To Factor value
06.02.2008 12 06.02.2008 16 1.4
The new file contains the period which gets overlapped with the previous global
exception period.
Date From Period From Date To Period To Factor value
06.02.2008 14 06.02.2008 15 1.6
The overlapped periods are split accordingly,
Date From Period from Date to Period To Factor value
06.02.2008 12 06.02.2008 13 1.4
06.02.2008 14 06.02.2008 15 1.6
06.02.2008 16 06.02.2008 16 1.4
2.For e.g., Already existing period,
Date From Period From Date To Period To Factor value
06.02.2008 12 07.02.2008 16 1.3
New period,
Date From Period From Date To Period To Factor value
07.02.2008 5 07.02.2008 8 1.7
The Global exception periods are split into,
Date From Period From Date To Period To Factor value
06.02.2008 12 07.02.2008 4 1.3
07.02.2008 5 07.02.2008 8 1.7
07.02.2008 9 07.02.2008 16 1.3
If any error occurs while updating the global exception periods into ZLF_GEXCEPTION
table, then display LF-001 message given below the Error messages section. For the
successful updating of global exception periods to ZLF_GEXCEPTION table, then
display the message Successfully completed.
User will be provided an option to download the global exception periods into an excel
file. User has to provide the necessary location details where to download the file while
downloading.
Thanks&Regards.
Bk -
when i try to the upload the .tiff file using RSTXLDMC program am not suceeded..
help me...
is there any transaction for preview purpose.... of what ever .tiff files uplHi
You can upload logo using SE78 or using program RSTXLDMC
or by using OAER
Steps for uploading Logo :-:
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you
wish to give
5. Execute
6. Then in the new screen select Standard doc. types
in bottom window
Click on the Screen icon
Now, it will ask for the file path where you have
to upload the logo
7. Now you can use this logo
To create a logo in SAP printouts just do the following
1. Save a Logo using Imaging, Paint shop Pro or Corel Draw as Tiff file.
2. Run program RSTXLDMC and enter the following parameters
Enter file name C:\COMPLOGO.TIF
UOM CM
Line width for text 132
Text name ZHEX-MACRO-COMPLOGO
Text ID ST
Text language = E
Number of Tiff gray levels (2,4,9) 2
3. Then Create a new window 'COMP' with attributes;
Window COMP description Company Logo
Left margin 7.00 CH window width 10.00 CH
Upper margin LN window height 8.00 LN
Finally in the text element, mention
/: INCLUDE 'ZHEX-MACRO-COMPLOGO' OBJECT TEXT ID ST LANGUAGE 'E'.
Please note that if object name is not indicated as 'ZHEX... the logo may not be printed!
You will not be able to see the logo in a test print. The same will be printed in actual printout.
SMARTFORM
1) In Smart Forms Editor, In left pane, right Click any Page (say Page1) and select Create -> Window, Give it a name and Description (Say Window1)
2) Right Click on Window (Window 1) and select Create -> Graphics, Give it a name and description
3) In general Attributes, Select Name, get search help (F4) , you will find a list of pictures
4) Select any picture and set its Resolution in DPI
5) Press F9 to open Smart Forms Builder, Select window (Window1) and In Output options window set, size and position of the Logo
6) Set any other parameters if required, save and activate.
7) If there is only 1 Window in the forms, set it as Main Window in general attributes.
8) Use TCode SE78 to upload new pictures and logos.
look at Thread Dynamic Graph in smartforms
Refer the links also -
Re: Dinamic Graph in smartforms
How to get file perperties in Unix server
Regards
Pavan
Maybe you are looking for
-
Lion not saving settings, iTunes not working, iPhoto not repairing
having a ton of issues and not sure if it's upgrading to Lion, updating iTunes or something else causing the problem. When I'm logged in as the main user getting a ton of problems including; 1) no matter which box I check or uncheck or which windows
-
Hello, i come here with a problem with my Nokia N8. The hdmi tv-out playback isn't working smoothly, I attached a video so you can see my problem. I hope you can help me solve this problem. http://youtu.be/VtbN5Aaa1Ls Also I am looking for an app tha
-
since the latest update of 3.5.11, firefox opens links in a new window. it used to open links in a new tab. how can i fix that?
-
What problems can I expect upgrading to Mountain Lion, the products I use most are Photoshop, Dreamweaver and InDesign. I have a student edition so my Photoshop is 12.0.4, I don't know if aI am eligible to upgrade to 5.1
-
Hi Database Version: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE 11.2.0.3.0 Production TNS for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.