URL in Standard Text
Is there anywhere you can place a URL in standard text and then navigate to an URL from Standard Text?
Hi,
you can keep URL in standard text, but you can not navigate using that URL from there.
Found this details from one of the thread in SDN, check it may help you
1. Create a new text element.
2. Type the text for which you wish to give hyperlink..say
www.google.com.
3. Now on the right corner on the you will be able to see a tab...Insert
url...Select the text i.e . www.google.com and click on the Insert url. tab....
4.You cannot navigate to the Url...this feature in not available in
smartforms...but is poss in adobe forms..
<b>Reward Points if it helps,</b>
Regards,
Satish
Message was edited by:
Satish Panakala
Similar Messages
-
How can I be able to add url link in the standard text
Hi expert,
I want to add a url link in the standard text.Please guide me how can i be able to do that.Hi experts,
I findout that there is no option in the standard text to add a url link and i findout the solution also we can create text module sepreatly ,here we can add a url link and then add in the smartfrom.In this way the user only can edit the text contents of the samrtfrom without seeing ht settings.
Thanks everyone for help. -
Translation of standard text urgent
Hi All,
I need to translate standard text that I have created in English languague to other languagues. How can I do this. If I have to do this in transaction SE63 then please provide me complete steps to do this.
Thanks,
shravan GHi
Refer these links
Standard Text thru SO10
[url] http://help.sap.com/saphelp_nw04/helpdata/en/c1/becc9313767243bde0a8a3e85b4021/frameset.htm [/url]
Regards
Raj -
I need t add a URL link to a word but have not bee able to locate this option, and the usual CTRL + K isn't working. Thanks!
Hi experts,
I findout that there is no option in the standard text to add a url link and i findout the solution also we can create text module sepreatly ,here we can add a url link and then add in the smartfrom.In this way the user only can edit the text contents of the samrtfrom without seeing ht settings.
Thanks everyone for help. -
How to search a SO10 - Standard text by Content
Hi experts,
I have a standard text content. need to know how to identify the standard text object it is contained in.
Example: I have a form output which has Terms and Condition printed. The content has a word like URL:
texst.test.com. There are lot of standard text objects available in that form and many other forms. We are not able to find the corresponding standard text object.
So like to know whether it is possibel to search and find a standard text object by contect say URL:
texst.test.com?
Let me know whether this is possible to do in SAP?
thx
GanuIt is not possible to get the standard text header by searching the contents. The tables for standard texts are STXH and STXL. Data is stored in raw clustered format.
As Raveesh metioned, manually looking into the smartform (Windows/Templates) and then using FM READ_TEXT to confirm the contents.
Thats the best possible way to get the standard text details from the contents. -
How to call Subroutines,Standard Text & using Internal Table in SmartForm
Hi all,
need help in the following areas.Its very urgent!
1.How to CAll Subroutines in Smart Forms
2.How to CAll Standard Text in Smart Forms
Situation:
We have an Internal Table T_SALES with all the data which am going to display in the smartform,How to retrive data from an internal table in Smart forms
Any Help in this direction would be highly appreciated.
Regards
RamuHi,
When you are using quantity or currency fields, you have to mentiong the reference fileds in a tab called CURRENCY/QUANTITY FILEDS in the GLOBAL DATA node.
Specifying a Currency or Quantity Reference
Use
In the ABAP Dictionary, you can assign a currency or quantity field to a table field. In the output of these fields, the system can then insert the relevant currency or unit:
· If the value field is in the same table as the corresponding currency or quantity field, the system recognizes the reference automatically, and formats the value field according to the currency or unit in the assigned field.
· If the value field is in a different table from the currency or quantity field, the system cannot recognize this reference automatically.
In the second case, you must indicate this reference to the system in the form, to ensure that the value field is formatted correctly.
Procedure
You want to assign a currency or quantity field in one table (for example, CURTAB) to a value field in another table (for example, VALTAB).
1. Create the reference to the currency field by entering the following values:
- Field Name: VALTAB-VALUE, if this is the value field of VALTAB that you want to display.
- Reference Field: CURTAB-CURRENCY, which is the currency field of CURTAB.
2. Under Data Type, specify whether the data type is a currency or quantity.
Result
In the output of the PDF-based print form, the system formats the value field VALTAB-VALUE according to the assigned value in the currency or quantity field of the global variable CURTAB-CURRENCY.
Thanks and Regards,
Bharat Kumar Reddy.V
Message was Added by: Bharat Reddy V
Message was Added by: Bharat Reddy V -
If condition in standard text in so10
Hi,
Im using a standard text where ive written an IF condition but its not working.Im calling that text in my program using READ_TEXT, TEXT_CONTROL_REPLACE and TEXT_SYMBOL_REPLACE function modules.Im not using sapscript or smartform.All my dynamic variables are working fine but for my IF condition what is happening is IF statement is also true and ELSEIF is also true.The statement under if is also getting printed and statement under elseif is also getting printed.
Could anyone help please.
Regards,
Nidhi.Standard text " if conditions " dont work other than scripts and smartforms.
to my surprise, if conditions have not worked even when I used them as includes in ADOBE forms.
Please handle the conditions in your program itself.
<< Moderator message - Point begging removed >>
Edited by: Rob Burbank on Sep 30, 2011 2:49 PM -
Call Standard Text by report replacing the variables with their values
Hi,
I have a requirement to call a standard text from a report.
Following is the text present in standard text.
&PTXT1-ENAME& will attend for interview
on &MEMOACT-PLDAT& at &MEMOACT-PLTIM&.
I am doing it by using READ_TEXT. But READ_TEXT reads the entire text as it is.
Is there any way I could retrieve the standard texts with &PTXT1-ENAME& replaced by the value of PTXT1-ENAME in report. And similarly &MEMOACT-PLDAT& replcaed with its actual value.
Any pointers in this regard would be helpful.
Points will be awarded.
Regards,
Mayank AgarwalHi,
In the Text
&PTXT1-ENAME& will attend for interview
on &MEMOACT-PLDAT& at &MEMOACT-PLTIM&.
do not use the * as a paragrapgh , use /: as the paragraph
Regards
Sudheer -
How to Print 25page standard text in Adobe form
Hi Form Gurus.
My requirement is to print a 25 pages form of standard text. Can any one please help me.
Thanks in advance.
Regards
ASAHA1
Moderator message: please work yourself first on your requirement, post specific problems later if necessary, always search for information before asking
locked by: Thomas Zloch on Aug 31, 2010 9:11 AMhi,
You can create a text module like you do for Smartforms and then you can add that in the interface and drag n drop it in the layout.
regards,
Sakshi -
Smartforms,How to display different standard Text in a Text element.
In smartform,if I want to according to the different conditions,display one of the serveral different standard Text objects which all maintained in SO10 in a same text element,how to do it?
if i put them in serval text elements, each condition only display the corresponding text element,but the text content can not display in the same position.
Is there anyone can tell me?
thanks.use Alternative to control it no problem
for example you want to display the different SO10 to same position TEMPLATE's row 1 col2
TEMPLATE1
Alternative case1
YES
INCLUDE TEXT1(display SO10) [set output option line1 column2]
NO
Alternative case2
YES
INCLUDE TEXT2(display SO10) [set output option line1 column2]
NO
Alternative case3
every case your SO10's text is always display at line2 column2
just try to test it ,you can know -
Is there a way to create standard text messages that can be reused easily
is there a way to create standard text messages that can be reused easily
if you meant phrases, then Yes
Setteings> general>keyboard> add new shortcut -
How to use Standard text in SAP SCRIPTS
Hi all,
Please tell me how can we use the standard text what we have created in SO10 with sap scripts.Hi Gaurav
You can create standard texts using the transaction SO10. Then to insert these standard texts in the SAPScript choose the menu, Insert->Text->Standard and choose the standard text that you want to choose.
Alternatively, you can display standard texts in your SAP Scripts using the command:
INCLUDE ZSTEXT OBJECT TEXT ID ST LANGUAGE EN
where ZSTEXT refers to the Standard Text name.
Reward pts if found usefull
Regards
Sathish:) -
Standard text (SO10) - To print the text in same line
In Standard text (SO10) I would like to have my text in a single line. For that I have used the extended line (=) tag. But It is not working.
Can anyone help me how can I achieve this.
Actually how many characters I can put in a single line. I think it is 72. But my text is less than 72 characters.
Can anyone Please help me.
Regards
Meshack Appikatla.A Text Symbol in Script or Smartform can take lenght of Maximum 80 characters. Any thing more than that will be truncated even if the window is long enoguh to hold more than 80 characters. Si your character formated need to be have the PROTECTED option checked.
At Topic:
Try increasing the window size in lenght or width, If that is not possible pratically, you can try by decreasing the font size. -
How to add standard text in smartforms?
Hi friends,
How to add standard text in smartforms ?
points rewarded soon
Regards
RHCreating the Standard Text:
Go to SO10
1. Enter Text Name. For example, ZABC
2. Text ID ST
3. Language EN
Click on Create.
And enter the Required Information and save.
To include a Standard text in SmartForm.
Follow the steps below:
1. Create a text node in the window.
2. Under general attributes select "Include text" as Type.
3. Specify the fields under Text.
Text Name ZABC
Text Object TEXT
Text ID ST
Language EN.
Hope it helps.
Regards. -
How to use standard texts in smartforms
Hi Friends,
How to use standard texts in smartforms, ie in scripts we are using standard texts using tr so10.
thanks in advance,
regards,
sharma.For long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above
btw SO10 is just for Scriptform, in smartforms we use text module to replace SO10
Maybe you are looking for
-
How to retrieve entire SOAP envolope from WebService
I can only get the xml data embeded in SOAP body from the resultEvent. Is there a way to get entire SOAP Envolope including Header and Body ?
-
Hex string upload as blob data to sql server
It need to open a file and read the content and upload to sql server(2005) as blob data. But it seems give error as the attached screen. So I tried to convert the file content string to hex string, but it take quite long time. Is there any way to sho
-
Hi friends, I'm new to ODI and i was in the process of installing ODI newly from the scratch..... As i was learning about ODI as a beginner now..im using ODI 10.1.3.5 which supports only EBS 11.5.10 To start the ODI agent on windows, they have given
-
Can't get G5 to boot directly into Linux
Hi, I have an Xserve G5, and am trying to install Debian on it. The problem is, I can boot the system my entering Open Firmware and typing "boot hd:,yaboot", but I'd rather not do that. How do I get the system to boot directly, without having to en
-
IPhone Configuration Utility Error
I am receiving an error when trying to launch the iPhone Configuration Utility on a Windows machine. I get iPCU has encountered a user-defined breakpoint. I get it every time I launch it. This worked just fine before the update to iTunes 9.2. No unin