URL in Vendor data

We have marked XI/XML as the send medium on the Company tab of Vendor data.
Where is the https or url entered for the vendor ?
-BAkulesh

Hi Marcin:
We are on SRM 5.0 (SRM Server 5.5) and in the transaction BBPMAININT, I dont see any area where I can enter the URL for the vendor.
I have seen this field in SRM 4.0.
Why did it disappear in SRM 5.0 ??
-Bakulesh

Similar Messages

  • Vendor Data Table

    Hi everyone,
    We are using SRM 4.0, Classic scenario.
    We had recently installed new support packages. Now, we need to get new vendors for auction purpose. We have got the vendors in SRM using transaction BBPGETVD. But while we are trying to map them to ECC using the link (URL) & "Manage Business Partner">>"Employee for Business Partner">>"Create".
    After entering the data & roles, when we try to "Save" the vendor data, there is nothing happening. Previously doing so, we used to get the successful completion message. Now, no message is appearing. We need to know if the data is getting updated in the backend or not.
    Also, if the data is not getting updated, then kindly let me know the function module or programs using which we can update the data.
    Kindly also give me the table in which all the entries of vendors in SRM & in ECC are available.
    Regards,
    Bhakti

    In this table Vendor details will be available
    Mapping Table Partner GUID - R/3 Number-VENMAP
    but what you are tried to create a contact person (employee of vendor ) via Manage Business Partner.
    Once you saved the data you must have got an userid for the contact person for the vendor and paswword would have email to you and you may get message BHAKTHI user id created like that.
    however check BP transaction for that user name which you created or explore in but000 table.
    br
    muthu

  • Error while extracting Vendor Data from R/3 system

    Hi all,
    I am trying to extract vendor data from R/3(ECC6.0) system to XI using Tcode MDM_CLNT_EXTR.
    already I have maintained partner profile for the same.
    I have given the necessary details like Creditor_extract,Target System and Distribution Mode as initial load.asusaully extraction process started and I found error in log file like"Table MASTER_IDOC_DATA is empty". Please help me if anyboday have idea about this.
    Thanks in Advance,
    Ravi.

    Hi Ravi,
    you've got to set up the message type MDMRECEIPT for the Idoc distribution from R/3 to XI. Check chapter 5.2 in the IT configuration guide available on <a href="http://service.sap.com/installmdm">MDM Documentation Center</a>. It describes the necessary steps.
    BR Michael

  • Vendor data - intial download from SAP R/3

    Dear All ,
    Im facing an issue during download of Vendor data from SAP R/3 to SAP CRM 5.0 system.
    Now we have done all settings in R/3 and CRM as per Note 883162 , but we are seeing that "NO Bdocs" are generated during initila download of Vendor data  (but inbound queues are generated in CRM )
    My question is in txn PIDV in SAP R/3 system .
    What should we enter for "Role Category " field in the PIDV transaction ??
    Please help , i have go-live on 13th July and im not finding a solution for this ...
    Regards
    Dinesh

    Hi
    Please check the following points.
    1. Please check the settings that you maintained in the table CRMSUBTAB in ECC. You need to have an entry as follows:
    User: CRM
    Object: VENDOR_MAIN
    U/D : DOWNLOAD
    Object Class: VEND ( & not BUPA for this entry)
    Function Module: PI_BP_VENDOR_MAIN_EXTRACT
    The other entry (for upload) has similar but different values. (Refer to the OSS note 883162.)
    2. Check if you have applied any filter settings in CRM for the adapter object VENDOR_MAIN.
    Regards,
    Srini.

  • Vendor data not getting updated properly

    we have recently encountered a couple of issues where
    1) a vendor was unblocked for all purchase org in ECC , but this was not replicated to SRM .In SRM , the vendor stilll showed as blocked in table BUT000
    2) Vendor Name2 field was changed but was not replicated to SRM.
    I have checked , the BBP_vendor_sync has been running properly and in SLG1 there are no errors.
    what could be the issue ...is there any sap note for this ?

    Hi,
    Pl ensure that you have made the following settings for running BBP_VENDOR_SYNC. http://help.sap.com/saphelp_srm40/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
    Else run BBPUPDVD to update the vendor data.
    Regards,
    Nikhil

  • How to load one-time vendor data into BW?

    Hello,
    I'm new to bi/bw.  We've loaded the R/3 vendor master data using business content 0VENDOR. As testing I've created an ODS with document, vendor and amount. When I ran a query  against that ODS in BEX, the one-time vendor doesn't have the actual vendor name of the document as in BSEC.
    Please let me know how I would get the one-time vendor acct data information to BW so when the query is correct with the vendor data in BSEC.
    thank you.
    Nu

    hi john,
    i know partially, our's was coming from BCS, so one of our users updated the OC41 Currency Rate table and after that a ZTCUR program to update the rates in BW.
    I do not have access to those programs, so i dont have much to add further.
    BUT I HAVE A QUESTION FOR YOU.
    Does the new rate supersedes the old ones. For eg: i just ran a query with plan yr 2007 and it selected the correct plan rate.
    But when i ran the same query with plan yr 2006 it STILL selects the new plan rate instead of the old one.
    Is that normal / correct ?
    I'd really appreciate your response.
    thank you,
    new yorker

  • Vendor data transfer from SRM to R/3.

    Hi,
    I create a Business partner in SRM, I need to transfer it to R/3 ????
    Pls advice how to transfer the same.
    regds
    pavan.

    Hi,
    Pls see the foll thread for solution/workarounds:
    Re: Self registered Bidders to be transferred to ECC
    Other related threads:
    Tranfer vendor data from SRM to ERP (R3 / ECC)
    Vendor replication from  SRM to R/3?
    External Vendor replication from SRM to R/3
    https://forums.sdn.sap.com/click.jspa?searchID=571462&messageID=1487382
    Replication of Vendor master from SRM to backend.
    BR,
    Disha.

  • Some vendors' data is not shown in Aging Report

    Hi, Experts,
    We are using SAP B1 2007A.
    Our aging report only shown several vendors' data, eventhough we selected 'All' vendors.
    Each vendor's aging report is all right, but we could not show 'All' vendors' aging together.
    We tried to select 'Display Vendors with Zero Balances' or/and 'Display Reconciled Transactions'; tried to select the range of the 1st vendor to the last vendor. - - - all of these do not work.
    Please help! Thanks!
    Lorrie

    Hi,
    If I am not wrong you are using the 2007A version and the patch level is below 38.
    You are trying to run the Backdated Aging report and all your Business Partners are not appearing in the report.
    Please check Note No. : [1178854|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1178854].
    Regards,
    Jitin
    SAP Business One Forum Team

  • Spend & Vendor Data Analysis

    HI BW gurus,
    Can any body please let me know what is Spend & Vendor Data Analysis. Also kindly let me know how to extract data from these two.
    Thanks & Regards
    Rajesh

    hi Rajesh,
    these two are extract from srm-supplier relationship management, take a look detail
    global spend
    http://help.sap.com/saphelp_nw2004s/helpdata/en/07/f7d23c7f8eb55be10000000a114084/frameset.htm
    vendor evaluation
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d1/446e9fd0f84091a7b8a289a88d0311/frameset.htm
    hope this helps.

  • ECC to CRM Mapping Issue for vendor data

    Hi,
    I am facing an issue for replicating vendor data from ECC to CRM. One of the vendor is not confirmed at ECC side and one vendor's time zone is not maintain in the master of time zone in CRM side. This may be the issue.
    But Where exact we can see that mapping of the tables of ECC and CRM. So in future we should maintain mandatory data based on mapping to avoid BDOC failure.

    Hello Rahul ,
    The field (MARA-BISMT) is not used in CRM system. If you want this
    field to be maintained in CRM as well, and to be transferred from R/3
    to CRM you must enhance the standard by customer extensions.
    The procedure for customer enhancements for Download from R/3
    to CRM is described in the following document:
    SAPNet, alias crm,   > Media Library   > Documentation   >
    Key Capabilities   > Master Data   > CRM Product: Customer
    Enhancements for Download/Upload
    For further information about Product Master enchancements and how to
    find techncical documentation about it please refer to the attached
    Note 428989.
    Thanks & regards,
    Krishnen

  • FF5 error parsing CSS font-face with url inline base64 data

    Firefox 5 refuses to parse CSS @font-face with url inline base64 data.
    I use the declaration:
    &lt;style type="text/css"&gt;
    @font-face {
    font-family: 'MyFont';
    src: url(data:font/truetype;charset=utf-8;base64,[base64data]);
    &lt;/style&gt;
    then used this way:
    &lt;div style="font-family:'MyFont'; font-size:12.0pt"&gt;Test text&lt;/div&gt;
    But Firefox is not using the font and in the error console, there is always the message:
    ''Error parsing the "src" value. Skipped to next declaration.''
    (more or less, I actually have this message in Czech)
    Tried with different mime types (font/ttf,font/otf,font/opentype,application/x-font-ttf etc.), with or without charset specification, with or without quoting the font family name, with different specifications:
    &lt;style type="text/css"&gt;
    @font-face {
    font-family: 'MyFont';
    src: url(data:font/truetype;charset=utf-8;base64,[base64data]) format(truetype);
    &lt;/style&gt;
    (tried also with opentype format, etc.)
    &lt;style type="text/css"&gt;
    @font-face {
    font-family: 'MyFont';
    src: url('myfont-webfont.eot?');
    src: local('☺'), url(data:font/truetype;charset=utf-8;base64,[base64data]);
    &lt;/style&gt;
    If I provide the font path:
    &lt;style type="text/css"&gt;
    @font-face {
    font-family: 'MyFont';
    src: url('Arial.ttf');
    &lt;/style&gt;
    (the font actually is Arial, for testing), it works (but I need to embed the font in the HTML for specific reason, so having the font externally is not the option).

    Finally I got it work! Thanks, cor-el, you pointed me the right way to solve this problem.
    There was problem with the encoding too (there was part of the font missing at the end, because of the bug in the program - I forgot to flush the buffered output stream), after then I was able to download the same copy of the TTF. - I didn't know about the possibility to put the entire url data to the location bar and try to download it, thanks cor-el.
    But it still didn't solve the problem ... the problem was, that the base64 stream was divided to multiple lines, like
    data:font/truetype;charset=utf-8;base64,
    AAEAAAAYAQAABACARFNJRwMaCRYAC8m8AAAXfEdERUaJ+Y1JAAr/JAAAAsJHUE9T
    e1arnwALAegAAKwaR1NVQt5CYFEAC64EAAAbmEpTVEZtKmkGAAvJnAAAAB5MVFNI
    RExjrAAAN8wAAA1dT1MvMhAyXXMAAAIIAAAAYFBDTFT9ez5DAAr+7AAAADZWRE1Y
    After I removed the line breaks, it works now! (the line is quite long then, because the base64 string is about 1MB, but it works)
    Strange that I do the same for images (jpeg, png) and there is no problem with base64 string divided to multiple lines.
    But anyway, I'm fine with that.

  • How to pass date parameter in URL in system date format

    Hi All,
    I am working on a requirement where I need to pass the date parameter in URL. Where date format needs to be system default date format. How can we format date without providing specific date format.
    Also, I got some post which had below example. Can you let me know what this format does.
    '/analysis/report?queryGroupName=Custom-ProjectInfo&TimePeriodBeginning=', <%+%> FCI_CHARFMT(TIME_PERIOD_START_DATE),' <%+%>
    '&TimePeriodBeginning_format=17&link_crumb=true'
    Waiting for response.
    Thanks,
    Saloni

    Hi,
    If you're running this in SQL*Plus, you can use substitution variables.
    If you have a file called my_query.sql, like this
    select    A.agent_no,
              (a.first_name || A.agent_name)     as agent_Name,
              P.Policy_No,
              D.Driver_No,
              D.mvr_predict_score,
           D.mvr_received
    from        policy  P,
           agent   A,
           Driver  D
    where       D.request_mvr_hit   = 'M'
    AND       D.mvr_predict_Score > 540
    And       D.request_mvr          = 'D'
    AND        p.fullkey           = d.fullkey
    AND       p.agent_no          = a.agent_no
    AND       d.mvr_received     >= TO_DATE ('&1', 'DD-Mon-YYYY')          -- New
    AND       d.mvr_received     <  TO_DATE ('&2', 'DD-Mon-YYYY') + 1     -- New
    order by  a.agent_no,
                 CASE  a.producer_type
               when  'S'  then 1
               when  'C'  then 2
               when  'R'  then 3
           end
    ;Then you can run it from SQL*Plus by saying something like:
    @my_query  1-Jan-2009  31-Dec-2009&1 in the script will be replace by the 1st argument (1-Jan-2009) and &2 will be replaced by the 2nd argument (31-Dec-2009).
    Notice that the last condition adds 1 to the argument
    AND       d.mvr_received     <  TO_DATE ('&2', 'DD-Mon-YYYY') + 1     -- Newbut uses the < operator (not <=). The result is that if mvr_received is any time on the last day (e.g. 31-Dec-2009 11:59 pm) will be included.

  • Vendor data transaction code

    Hi all,
    Please write me the transaction code to get the vendor data.
    Thanks.

    Hi,
    see tcodes for display of vendor data.
    XK03/MK03
    tables.
    LFA1 - Vendor Master(General Section)
    KFB1 - Vendor Master(Company Code)
    Regards,
    KV.

  • Customer and vendor data

    Hi Colleagues,
    Can you please let me know all the related tables where customer and vendor data resides.
    Regards
    Anuj

    Hi,
    Customer data tables
    KNA1     Customer master
    KNB1     Customer / company
    KNVV     Customer sales data
    KNBK     Bank details
    KNVH     Customer hierarchy
    KNVP     Customer partners
    KNVS     Shipment data for customer
    KNVK     Contact persons
    KNVI     Customer master tax indicator
    Vendor data tables
    LFA1     Vendor master
    LFB1     Vendor per company code
    LFB5     Vendor dunning data
    LFM1     Purchasing organisation data
    LFM2     Purchasing data
    LFBK     Bank details
    Pls reward suitably..
    Best regards,
    S.Karthick

  • Change IE02 field (Customer/Vendor Data - Operator)

    Hello experts,
    Does anyone know if there is any BAPI or FM for changing the Operator Field (IE02-> Customer/Vendor Data -> Operator) ???
    Any advice/suggestion about how to do this without using a BDC program?
    Thanks in advance,
    -C

    Hi robert,
    it will solve your problem.
    CUSTOMER_ADD_DATA_CS open for input in display mode
    We can use SET_DATA method and parameter  i_Activity.
    Reddy

Maybe you are looking for