Url iview showing error when displaying a page with frames
Hi,
I have a requirement of putting a site in a url iview in the portal. I created a url iview and when I preview it, it displays correctly. When I assign this to a role and access it through the navigation, it gives an error.
The weird thing is that, it works sometimes and it does not work sometimes. The url I am trying to display is working fine, because even when the portal shows error, if I try the url straight from the browser, it loads without any errors.
So what could be the problem? The site I am trying to display contains frames. Could this be the problem? If so, why is it working sometimes and does not work sometimes?
Thanks in advance.
Regards
Ranjith
Hi Martin,
The issue is still there. But one interesting thing that was noticed by my team mate was that if you add the site to the list of sites on browser which can use cookies, everything works fine. Similarly, if I reduce the privacy setting of my browser to Low, it works fine.
Again, even if you keep the privacy setting as Medium and does not allow the site to use cookies, the iview opens fine if you open it in a new window.
Any thoughts on this?
Thanks & Regards
Ranjith
Similar Messages
-
Error: Cannot Display Page----showing error when displaying SRS window.
Hi All,
Iam getting error when trying to display concurrent Program result view page i.e 'FNDCPREQUESTVIEWPAGE'
You cannot complete this task because one of the following events caused a loss of page data:
Your login session has expired.
A system failure has occurred.
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
i wrote the code there in the link http://oracleanil.blogspot.com/2009/04/steps-for-insert-in-eo.html
Please anybody tell me what the reason behind this error.??
Edited by: 881533 on Nov 10, 2011 1:15 AMHi,
This page normally dont have back button ,
if u use browser back button some times it throws error,
Create a link on this page using personailization and call some function to navigate to the page which u want,
u can navigate u another page using the link instaed of using broeser back buton.
Thanks
Raju -
Hello,
I've just recently encountered a weird error / bug in SharePoint. Here is the scenario:
- I have a custom column "Test Date" that is of DateTime field type. The field is configured as REQUIRED.
- It is added to a custom Content Type "Test CT" that is based on a "Publishing Page" content type
- I have created a Page Layout "Test PL" which is based on that particular content type.
Now here is what happens:
1. I try to create a page based on both that Content Type and Page Layout in the Pages Library. I manage to create it successfully.
2. However, when I go to try and edit the page, fill-in the required values and try to save it using the PAGE TAB -> SAVE BUTTON, I get the below error/s. Note that this happens no matter what I choose in the drop-down menu for Save Button.
"The file XXX has been modified by USER on DATE"
But I know I am the ONLY user modifying the page.
If I try to save again it gives me options to whether Discard my Changes, Keep Editing, Overwrite Changes, or Merge.
3. HOWEVER, if I use the Save button on the UPPER RIGHT corner of the screen (the shortcut). I am able to save successfully without any errors!
The only thing I've tried that made it work was if I made the DateTime OPTIONAL. But I need it to be REQUIRED.
Is there any workaround to this error / bug?
ThanksI have some additional info but nothing really good.
If you click the Save in the left side of the Ribbon then it looks like that is when you get the message. If you click the Save in the top right corner you won't get the message. They must be calling different saving functions.
There really is no way around it other than making the field optional which probably removes some server side validation checks causing that message.
We've chosen to remove that field from the page as I needed it required, then they can't publish the page until they go to the properties and set the article date. By removing the field from the page layout the message goes away.
I hope MS will fix this at some point.
-tom daly -
EPCM error when leave Webdynpro page ???
In Portal, when navigate from page with webdynpro iViews to any other workset or page, clicking in some node of the top level navigation, opening a windows alert popup , and said: Exception in EventDistribute occurred. Throw it to upper level?
And then click accept 4 times let me continue.
After trying multiple alternatives, the issue certainly is occurring when: I am in a page with at least one webdynpro java, and I go to another. That is, to leave or close the webdynpro iView has generated the problem.
When I choose "debug" the exception with MS Dev studio, I found this error code, this is the point when the exception raise:
EPCM.eventDistribute=function( consumers, eventObject, resultArray){
var isRetValCollect=(resultArray != null);
var eListener
var retVal;
for (var idx in consumers){
eListener=consumers[idx];
retVal=null;
try{
retVal=eListener.call( eventObject );}
catch( e){
if (EPCM._private.dbgException){
if(confirm("Exception in EventDistribute occured.\nThrow it to upper level ?")) throw(e);}
if(isRetValCollect && retVal != null){
resultArray[resultArray.length++]=retVal;}
any suggestion ?????
thanks in advance!
Leandro.Add this: not only when leave a webdynpro iview or page is the problem, also when resizing a webdynpro page in the IE.
Any change in the screen size, raise this popup error
any idea???
thanks in advance -
I have ipad 2. Safari stopped working. Screen appears with light gray cover and is frozen. Some websites show errors when debug is on.
But how actually can I debug or fix it? Thank you.Here are a couple suggestions:
1. Go into Settings > Safari and Clear Cookies Clear Cache
2. Fully close Safari: from your home screen, double tap your home button and the most recently used Apps will show up. Hold your finger on the Safari App until all Apps start jiggling. You'll see a minus sign on the upper left side of Safari. Touch the minus and Safari will fully close. Touch your home button again to stop apps from jiggline, then touch your home button again to return to your home page.
3. Reboot your iPad: Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider) until the Apple Logo appears, then let go of both buttons and your iPad will restart, but no data or settings will be lost.
After iPad comes back up, try Safari again, and you should be good to go. -
Error when displaying xellerate form
Hello,
I have the following error when displaying the form of any xellerate users :
ERROR,03 May 2011 10:40:56,273,[XELLERATE.APIS],Class/Method: tcFormDefinitionOperationsBean/getFormFieldPropertyValue encounter some problems: Property 'Column Names' has not defined for the form field '-19'
All is working fine, just this error that is diplayed each time I want to display a user form. In my formMetadata.xml, I have the following definition for the field -19, it is the manager :
<Attribute name="-19" label="global.label.managerid" displayComponentType="LookupField" variantType="long" dataLength="50" map="Users.Manager Login">
<ValidValues lookupColumnNames="User ID,Last Name,First Name" lookupQuery="SELECT usr.usr_key,usr.usr_last_name,usr.usr_first_name,usr.usr_login FROM usr, ugp, usg WHERE ugp.ugp_name = 'PROF_MANAGER' AND ugp.ugp_key = usg.ugp_key AND usr.usr_key = usg.usr_key AND usr.usr_status = 'Active' AND usr.usr_emp_type = 'Employee'" displayColumns="Users.User ID,Users.Last Name,Users.First Name" selectionColumn="Users.User ID"/>
</Attribute>
What is the problem with my attribute definition ?
Thanks for your help,
Kind regards,
mdadiknHello,
I'm new to OIM. I am a new hire to a group that had a contractor setup the whole system. I'm finding a similar issue on our system here. I've looked through the database and cannot seem to find the issue. Error happens when from the webapp clicking on "Create IT Resource".
From the Error Log:
Class/Method: tcFormDefinitionOperationsBean/getFormFieldPropertyValue encounter some problems: Property 'Column Names' has not defined for the form field '-82'
Line with issue from FormMetaData.xml:
<Attribute name="-82" label="global.label.itresourcetype" displayComponentType="LookupField" variantType="String" dataLength="255" map="IT Resources Type Definition.Server Type" useInRule="true">
<ValidValues lookupQuery="select svd_svr_type from svd" selectionColumn="svd_svr_type"/>
</Attribute>
Please let me know any additional information/questions. From what I can tell everything should be correct. Sorry again if the answer is obvious, I'm only 3 days into OIM.
Thank you,
Ryan -
How to "Show notifications when display is off"
Hi,
In Mavericks Beta the notifications from Mail, Messages, Facebook etc. were displayed even when the screen was turned off. It lit up the screen for a while showed the notification for few seconds and then the screen was turned off again. I really liked that feature cause I could see whats happening on my iMac even if I wasn't using it.
In this Apple document this feature is still described http://support.apple.com/kb/PH14360?viewlocale=en_US&locale=en_US
Show notifications when display is off or locked
Get alerts when your display is off or your Mac is locked.
But the option to enable it is no longer in the Notifications settings, instead there is "Show notifications on lock screen".
So please let me ask, is there some possibility to show notifications on turned off display? Maybe by editing some preference file or something like that?
Thank you very much for answers.
Best Regards
MilanI too would like to know a way around this problem. In the prior version of iCal, you could enable alarms only when iCal was running. I routinely sync three computers, sometimes hours to days apart. So unless I remember to turn alarms off prior to shutting down the machines, the alarms are not properly updated upon syncing when an idle machine is turned back on.
Hope this makes sense. Either way, it would have been better if Apple had not gotten rid of this feature in the new iCal.
Eddie -
ABAP Run time error when display the Customs Export declarations
Hi,
I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
While debugging we found that Primary Key of the below structures are not the same
lt_corpar type /sapsll/corpar_t
lt_corpar_ht type /sapsll/corpar_k02_ht
Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
Error message short details
Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
"/SAPSLL/CUHD_LOAD_SELECTION".
The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
In the source code you have the termination point in line 144
of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
Regards,
Pradeep MaddiHi,
I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
Proforma Invoice not transferred to GTS
After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
Error details
Runtime Errors ITAB_DUPLICATE_KEY
ABAP Program /SAPSLL/SAPLCUHD_SELECTION
Application Component SLL-LEG
You tried to insert an entry into table "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
Regards,
Pradeep -
Ent-06972 Error When Displaying BIBeans for Dimension Dataviewer
dear all,
I have problem when trying to view data on dimension with dataviewer in OWB 11g. it's no problem when i load small amount of data, but when i load huge amount of data i've got error message "ent-06972 Error When Displaying BIBeans for Dimension Dataviewer ". is it some kind of bug in OWB?I am also getting the same error, using 11g.
-
Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S: Sun Solaris SPARC 64 bits 5.10
EBS URL 12.1.3 cannot display web page though apps services are up. This target instance is SSL enabled and cloned instance. Autoconfig runs successfully on both the tiers.
1 DB node and 1 apps Node(forms,Reports,CM,Web).
DB Tier Autocofig:
Updating rdbms version in Context file to db112
Updating rdbms type in Context file to 64 bits
Configuring templates from ORACLE_HOME ...
AutoConfig completed successfully.
$
Autoconfig Apps Tier
Configuring templates from all of the product tops...
Configuring AD_TOP........COMPLETED
Configuring FND_TOP.......COMPLETED
Configuring ICX_TOP.......COMPLETED
Configuring MSC_TOP.......COMPLETED
Configuring IEO_TOP.......COMPLETED
Configuring BIS_TOP.......COMPLETED
Configuring AMS_TOP.......COMPLETED
Configuring CCT_TOP.......COMPLETED
Configuring WSH_TOP.......COMPLETED
Configuring CLN_TOP.......COMPLETED
Configuring OKE_TOP.......COMPLETED
Configuring OKL_TOP.......COMPLETED
Configuring OKS_TOP.......COMPLETED
Configuring CSF_TOP.......COMPLETED
Configuring IGS_TOP.......COMPLETED
Configuring IBY_TOP.......COMPLETED
Configuring JTF_TOP.......COMPLETED
Configuring MWA_TOP.......COMPLETED
Configuring CN_TOP........COMPLETED
Configuring CSI_TOP.......COMPLETED
Configuring WIP_TOP.......COMPLETED
Configuring CSE_TOP.......COMPLETED
Configuring EAM_TOP.......COMPLETED
Configuring FTE_TOP.......COMPLETED
Configuring ONT_TOP.......COMPLETED
Configuring AR_TOP........COMPLETED
Configuring AHL_TOP.......COMPLETED
Configuring OZF_TOP.......COMPLETED
Configuring IES_TOP.......COMPLETED
Configuring CSD_TOP.......COMPLETED
Configuring IGC_TOP.......COMPLETED
AutoConfig completed successfully.
$
---------------------------------+--------------------+---------+---------
ias-component | process-type | pid | status
---------------------------------+--------------------+---------+---------
OC4JGroup:default_group | OC4J:oafm | 10466 | Alive
OC4JGroup:default_group | OC4J:forms | 10425 | Alive
OC4JGroup:default_group | OC4J:oacore | 10062 | Alive
OC4JGroup:default_group | OC4J:oacore | 10061 | Alive
OC4JGroup:default_group | OC4J:oacore | 10060 | Alive
OC4JGroup:default_group | OC4J:oacore | 10059 | Alive
HTTP_Server | HTTP_Server | 9993 | Alive
adopmnctl.sh: exiting with status 0
grep -i s_active_webport $CONTEXT_FILE
<activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
Could anyone please advise what's wrong here. Why URL is not being accessible.
Thanks for your time
Regards,Yes. We are using SSL in all te instances. Please see the comparison between the working and non-working instance
Source Instance(Working instance)
$ grep s_webssl_port $CONTEXT_FILE
<web_ssl_port oa_var="s_webssl_port" oa_type="PORT" base="4443" step="1" range="-1" label="Web SSL Port">4508</web_ssl_port>
$
$ grep -i s_https_listen_parameter $CONTEXT_FILE
<httpslistenparameter oa_var="s_https_listen_parameter">4508</httpslistenparameter>
$ grep s_active_webport $CONTEXT_FILE
<activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
$
$ grep -i s_enable_sslterminator $CONTEXT_FILE
<sslterminator oa_var="s_enable_sslterminator"> </sslterminator>
Target Instance(This does not work)
$ grep s_webssl_port $CONTEXT_FILE
<web_ssl_port oa_var="s_webssl_port" oa_type="PORT" base="4443" step="1" range="-1" label="Web SSL Port">4519</web_ssl_port>
$
$ grep -i s_https_listen_parameter $CONTEXT_FILE
<httpslistenparameter oa_var="s_https_listen_parameter">4519</httpslistenparameter>
$
$ grep s_active_webport $CONTEXT_FILE
<activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
$
$ grep -i s_enable_sslterminator $CONTEXT_FILE
<sslterminator oa_var="s_enable_sslterminator"/>
Any suggestions?
Thanks, -
Get error while invoking a page with "create"
I get this error while invoking a page with "create". Also please any one tell me where is the log file is place to see the full story.
]] Root cause of ServletException.
javax.el.PropertyNotFoundException: Target Unreachable, 'Comments' returned null
at com.sun.el.parser.AstValue.getTarget(AstValue.java:88)
at com.sun.el.parser.AstValue.isReadOnly(AstValue.java:126)
at com.sun.el.ValueExpressionImpl.isReadOnly(ValueExpressionImpl.java:230)
at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.getReadOnly(EditableValueRenderer.java:400)
at oracle.adfinternal.view.faces.renderkit.rich.FormElementRenderer.renderAsElement(FormElementRenderer.java:199)
Truncated. see log file for complete stacktrace
If i use a "create button then it does not throw error.
Please help.When you are invoking your page, does your view object has an empty row where data can go and presist?
Create a an empty row in your view object(vo.createRow()) , or use create operation from data control palette.
You can set the log in Tools->Preferences-->Environment-->Log.
Regards,
Vikram -
Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB
Hi Ciaran19,
Are you sending files from the Adobe Send interface, Adobe Reader, or the Outlook plug-in?
Have you checked to see whether the files that you're sending appear in the Recent Files/Sent Files list when you're logged on to https://cloud.acrobat.com? (It could be that they're uploading, but not being sent.)
It would also be worthwhile to send the files in smaller batches, to see whether a particular file or files is problematic, and causing the error.
Please let us know how it goes. If you're still having trouble, please let us know where you're sending from, and whether you're able to send the files in smaller batches. It would also be helpful to know the exact error message that you're receiving.
Best,
Sara -
When loading a page with many hires images, Firefox becomes really slow and scrolling becomes jumpy then eventually becomes completely unresponsive. Unusual high memory usage of up to 2gigs just for firefox when loading these pages. This was never a problem with v3.6.
I encountered the same type of problem. Firefox running terribly slowly and slowing down my entire machine (Core i5 with 256GB SSD). Searching the forums, I found a couple of things about troubleshooting performance issues, one of which was to use '''hardware acceleration''', that is on by default. It was turned on on my PC, '''so I tried deactivating it, and it worked!'''
So doing the exact opposite as Mozilla support said solved the problem. It is really a pain now to work with Firefox. I'm using it because I have no choice, but I'd recommend IE and Chrome over Firefox... Whatever, the market will decide once Firefox has become to crappy... -
How to verify JavaScript alert message display on page with C#?
Hi All,
I have a question about verify the JavaScript alert message on page. For example, I input the script in browser address like: "javascript:onmouseover=alert('popup windows')" . How to verify there's a alert message displayed on page with C#?
ThanksAre you trying to use some automation or ? What the previous solution is they have put the text in the dom for you to pull out with C# or other languages.
if you are trying to automate this through a browser maybe look into WebDriver
WebDriverWait wait = new WebDriverWait(driver, 2);
wait.until(ExpectedConditions.alertIsPresent());
Alert alert = driver.switchTo().alert(); var alertText = alert.Text;
alert.accept(); -
Why not i can use an archor in-page when i open page with ff4.0.1?
as title.
I can not use an archor in-page when i open page with ff4.0.1.Sounds like you want the New Tab Homage extension.
https://addons.mozilla.org/en-US/firefox/addon/777/
For more info about extensions, see [[Using extensions with Firefox]]
Maybe you are looking for
-
My iTunes Account is out of control
Help! I am a parent with 3 kids on my account. We range from adult to 8 years old. Is there a way to have the parent own the account, but then have 4 sub-accounts so that everything is separated? My kids don't want to see my 80's music and I don'
-
I purchased an I pad giving my macbook to my husband. His photo stream doesn't work but mine still goes onto macbook . How can I stop that ?
-
Please Help: Solaris 8 Installation Failure
Hi Everyone. I have a brand new Dell PowerEdge 500SC, Ram= 1G, and there is no operating system on it. I tried to install from both the Installation CD or the Software CD 1, 2, but I get the same warnings and the installation fails and the system reb
-
Exchange 2007 2010 coexist autodiscover fails
We are migrating from 2007 to 2010. Autodiscover is not working on the 2010 CAS servers (4 of them). SMTP=[email protected] Attempting URL https://autodiscover.domain.com/Autodiscover/Autodiscover.xml found through SCP Autodiscover to https://autodis
-
Where is the color eyedropper in illustrator draw?
Where is the color eyedropper in illustrator draw? This is a feature I desperately need.